summaryrefslogtreecommitdiff
path: root/src/include
AgeCommit message (Collapse)Author
2018-05-16lib/prog_loaders: Store CBFS type in struct progPatrick Rudolph
Store the type of the loaded program after locating the file and add a method to retrieve the type. Will be used to distinguish between SELF and FIT payloads. Change-Id: Ic226e7e028d722ab9e3c6f7f1c22bde2a1cd8a85 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26028 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-14cpu/x86: Add support to run function with argument over APsSubrata Banik
This patch ensures that user can pass a function with given argument list to execute over APs. BUG=b:74436746 BRANCH=none TEST=Able to run functions over APs with argument. Change-Id: I668b36752f6b21cb99cd1416c385d53e96117213 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-14program_loading: make types a mask, make unknown type a non-zeroRonald G. Minnich
This will allow loading of programs that are more than one type, e.g. ramstage type might now be a stage or payload. Further, unknown types of 0 are dangerous, make it a real value. Change-Id: Ieb4eeb7c5934bddd9046ece8326342db0d76363c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/26242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-05-11devicetree: Add USB device typeDuncan Laurie
This commit adds support for describing USB ports in devicetree.cb. It allows a USB port location to be described in the tree with configuration information, and ACPI code to be generated that provides this information to the OS. A new scan_usb_bus() is added that will scan bridges for devices so a tree of ports and hubs can be created. The device address is computed with a 'port type' and a 'port id' which is flexible for SOC to handle depending on their specific USB setup and allows USB2 and USB3 ports to be described separately. For example a board may have devices on two ports, one with a USB2 device and one with a USB3 device, both of which are connected to an xHCI controller with a root hub: xHCI | RootHub | | USB2[0] USB3[2] device pci 14.0 on chip drivers/usb/acpi register "name" = ""Root Hub"" device usb 0.0 on chip drivers/usb/acpi register "name" = ""USB 2.0 Port 0"" device usb 2.0 on end end chip drivers/usb/acpi register "name" = ""USB 3.0 Port 2"" device usb 3.2 on end end end end end Change-Id: I64e6eba503cdab49be393465b535e139a8c90ef4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/26169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-10bootmem: Keep OS memory map separate from the startJulius Werner
The patch series ending in 64049be (lib/bootmem: Add method to walk OS POV memory tables) expanded the bootmem framework to also keep track of memory regions that are only relevant while coreboot is still executing, such as the ramstage code and data. Mixing this into the exsting bootmem ranges has already caused an issue on CONFIG_RELOCATEABLE_RAMSTAGE boards, because the ramstage code in CBMEM is marked as BM_RAMSTAGE which ends up getting translated back to LB_RAM in the OS tables. This was fixed in 1ecec5f (lib/bootmem: ensure ramstage memory isn't given to OS) for this specific case, but unfortunately Arm boards can have a similar problem where their stack space is sometimes located in an SRAM region that should not be made available as RAM to the OS. Since both the resources made available to the OS and the regions reserved for coreboot can be different for each platform, we should find a generic solution to this rather than trying to deal with each issue individually. This patch solves the problem by keeping the OS point of view and the coreboot-specific ranges separate from the start, rather than cloning it out later. Ranges only relevant to the coreboot view will never touch the OS-specific layout, to avoid the problem of losing information about the original memory type of the underlying region that needs to be restored for the OS view. This both supersedes the RELOCATABLE_RAMSTAGE fix and resolves the problems on Arm boards. Change-Id: I7bb018456b58ad9b0cfb0b8da8c26b791b487fbb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26182 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09lib/nhlt: add support for passing subsystem_id to endpoint's structureHarsha Priya
This patch adds subsystem_id to nhlt structure whose value is passed on to the endpoint's structure. Its default value is retained to be NHLT_SSID. Change-Id: Iad53f27e958f50e02e928cd8fa60d8397ca0eb06 Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/26046 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-05soc/intel: Add KBL-R pci id supportLijian Zhao
Add KBL-R internal graphics device pci ids into coreboot. BUG=N/A TEST=Boot up fine on kabylake-r platform with display on. Change-Id: I0813247624770b70fe8b3ec3825fd17a9878cd0e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/26018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@chromium.org>
2018-05-04cpu/x86/mp: remove unused functions and limit API exposureAaron Durbin
barrier_wait_timeout() was not used anywhere in the code. The remaining two functions, barrier_wait() and release_barrier(), are not used anywhere but the mp code. Change-Id: If09991f95306becc68b6008ae6448695fb4a2dca Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/26021 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-04lib/bootmem: Add method to walk OS POV memory tablesPatrick Rudolph
Add method to walk memory tables from OS point of view. The tables don't change when modifiying bootmem entries and doesn't contain bootmem specific tags. Change-Id: Iee332a9821d12a7d9a684063b77b0502febd8d7d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-04lib/bootmem: Add method to walk memory tablesPatrick Rudolph
Add a method to walk bootmem memory tables and call a function for each memory range. The tables might not match with OS sight of view. Return true if the callback function returned false. Required for FIT support in coreboot to find a usable RAM region. Tested on Cavium SoC. Change-Id: I0004e5ad5fe2289827f370f0d0f9979d3cbd3926 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-04lib/bootmem: Add more bootmem tagsPatrick Rudolph
Introduce new bootmem tags to allow more fine grained control over buffer allocation on various platforms. The new tags are: BM_MEM_RAMSTAGE : Memory where any kind of boot firmware resides and that should not be touched by bootmem (by example: stack, TTB, program, ...). BM_MEM_PAYLOAD : Memory where any kind of payload resides and that should not be touched by bootmem. Starting with this commit all bootmem methods will no longer see memory that is used by coreboot as usable RAM. Bootmem changes: * Introduce a weak function to add platform specific memranges. * Mark memory allocated by bootmem as BM_TAG_PAYLOAD. * Assert on failures. * Add _stack and _program as BM_MEM_RAMSTAGE. ARMv7 and ARMv8 specific changes: * Add _ttb and _postram_cbfs_cache as BM_MEM_RAMSTAGE. ARMv7 specific changes: * Add _ttb_subtables as BM_MEM_RAMSTAGE. Change-Id: I0c983ce43616147c519a43edee3b61d54eadbb9a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-03pci: Fix function prototypePatrick Rudolph
Fix a function prototype to support PCI on non x86. The function itself does have the correct argument already. Change-Id: I564fcfe9b85ed4f841a48fe17a3f5bf80e16560b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-03cpu/x86: Add infinite timeout support into run_ap_work() functionSubrata Banik
There might be certain requirement in user function where user might not want to pass any timeout value, in those cases run_ap_work() should consider infinity as timeout and perform all APs initialization as per specification. Set expire_us <= 0 to specify an infinite timeout. BRANCH=none BUG=b:74436746 TEST=run_ap_work() is running successfully with 0 expire_us. Change-Id: Iacd67768c8a120f6a01baaa6817468f6b9a3b764 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25622 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-02drivers/generic/bayhub: Add driver for BayHub BH720Simon Glass
Add a driver which puts the device into power-saving mode. BUG=b:73726008 BRANCH=none TEST=boot and see this message: BayHub BH720: Power-saving enabled 110103 From linux: $ iotools pci_read32 2 0 0 0x90 0x00110103 Change-Id: Idbfb114f3782c9386ce9b487c3abdb0afbc4a0d9 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/25966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-02src/device: Fix discarded-qualifiers compilation issueSubrata Banik
coreboot build is broken due to CL: I6830a65bc9cea2907f4209bb97a53ccebcbf248d This patch ensures to build coreboot successfully. Change-Id: I4c9dfc9b19ce159ce1abcfbb287be4ce273cbaf1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-02pci: Fix MMCONF_SUPPORT on non x86Patrick Rudolph
Move x86 specific pci_bus_default_ops into arch/x86 folder. Fixes compilation on platforms that do neither have MMCONF_SUPPORT nor NO_MMCONF_SUPPORT (for example: all non-x86) but select PCI. Change-Id: I0991ab00c9a56b23cd012dd2b8b861f9737a9e9c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-30lib/bootmem: Introduce custom bootmem tagsPatrick Rudolph
Introduce bootmem custom memory tags and use them instead of reusing LB_MEM tags. Use asserts in bootmem_add_range to verify parameters. Tested with uImage payload on Cavium SoC. Change-Id: I7be8fa792fc7933ca218ecd43d250d3a9c55caa6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-04-30lib/devicetree: Integrate flattened devicetree supportPatrick Rudolph
* Adapt to coreboot coding style. * Use coreboot's endian conversion functions. * Fix header and header guards. * Get rid of unused functions. * Add Kconfig to build it on ramstage. * Replace size32 with ALIGN_UP and DIV_ROUND_UP. * Add NULL pointer checks * Convert constants to defines Required for Cavium's BDK and uImage FIT support. Change-Id: I6e6cd9f78fb402bd54d684097326d26eb78d552a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-04-30lib: Raw import FDT devicetree from depthchargePatrick Rudolph
Import from https://chromium.googlesource.com/chromiumos/platform/depthcharge Required for general devicetree patching and FIT support. Coding style and coreboot integration will be done in a separate commit. Change-Id: Ida75d4786eae38d84bfc71bf53573dafca8eda40 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-04-30device: constify some variablesLubomir Rintel
Change-Id: I6830a65bc9cea2907f4209bb97a53ccebcbf248d Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/25873 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-26device: Add flag to disable PCIe ASPMNico Huber
For broken devices that spuriously advertise ASPM, make it possible to decide ASPM activation in the device driver. Change-Id: I491aa32a3ec954be87a474478609f0f3971d0fdf Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/25617 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-26arch/x86: print cr2 value on every exceptionAaron Durbin
Even though most x86 systems don't run with paging on, it's helpful to always print it out for the ones that do without making a more complicated handler. New dump will look like the following: Unexpected Exception: 6 @ 10:7ab84be2 - Halting Code: 0 eflags: 00010006 cr2: 00000000 eax: 7abb80ec ebx: deadbeef ecx: 00000000 edx: 00000002 edi: 7abb3000 esi: 00000004 ebp: 7abb2fd8 esp: 7abb2fb0 7ab84ba0: 00 01 00 83 ec 0c 6a 39 7ab84ba8: e8 8a 02 01 00 e8 e1 08 7ab84bb0: 00 00 e8 4e 3d 00 00 59 7ab84bb8: 5b 52 50 e8 f5 3c 00 00 7ab84bc0: c7 04 24 0a 00 00 00 e8 7ab84bc8: 3c 3d 00 00 c7 04 24 80 7ab84bd0: 00 00 00 e8 5f 02 01 00 7ab84bd8: e8 1e 38 01 00 e8 7e 50 7ab84be0: 01 00 0f 0b bb 98 ec ba 7ab84be8: 7a 83 c4 10 8b 03 85 c0 7ab84bf0: 0f 84 be 00 00 00 83 78 7ab84bf8: 04 00 8d 50 08 75 0c 56 7ab84c00: 56 ff 30 52 e8 f8 fe ff 7ab84c08: ff eb 0a 51 51 ff 30 52 7ab84c10: e8 2e ff ff ff 83 c4 10 7ab84c18: 83 c3 04 eb cf 89 d8 e8 BUG=b:72728953 Change-Id: I0e87bbe776f77623ad8297f5d80167998daec6ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25762 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-26cpu/x86: add limited runtime identity page mappingAaron Durbin
When employing PAGING_IN_CACHE_AS_RAM more areas need to be mapped in at runtime. Therefore, paging_identity_map_addr() is added to support adding identity mappings. Because there are a fixed amount of pages in cache-as-ram paging only the existing paging structures can be used. As such that's a limitation on what regions and length one can map. Using util/x86/x86_page_tables.go to generate page tables will always populate all the page directory pages. Therefore, 2MiB mappings are easy to map in. BUG=b:72728953 Change-Id: Ibe33aa12972ff678d2e9b80874529380b4ce9fd7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25718 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-26drivers/uart: Add helper function to allow bit-bangingJulius Werner
In some cases it may be useful to be able to bitbang a UART, such as during early bring-up when a driver for the actual controller isn't available yet. On some platforms we may even want to use this permanently, such as on the SDM845 where the hardware UART controller needs to have firmware loaded and is thus unavailable for most of the bootblock. This patch adds some helper code that makes it easy to implement this on a platform, you just have to pass it a function to control the Tx pin state and it will do the rest. It relies on the mono_time API and is thus bound to microsecond timing granularity, but that seems to be barely good enough for 115200 baud if the bit times are calculated carefully. Change-Id: If7dcecc7b8a95ec15f456efd2ec1f1e0dde239b4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/25812 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-25arch/x86: add support for cache-as-ram pagingAaron Durbin
Processors, such as glk, need to have paging enabled while in cache-as-ram mode because the front end is agressive about fetching lines into the L1I cache. If the line is dirty and in the L1D then it writes it back to "memory". However, in this case there is no backing store so the cache-as-ram data that was written back transforms to all 0xff's when read back in causing corruption. In order to mitigate the failure add x86 architecture support for enabling paging while in cache-as-ram mode. A Kconfig variable, NUM_CAR_PAGE_TABLE_PAGES, determines the number of pages to carve out for page tables within the cache-as-ram region. Additionally, the page directory pointer table is also carved out of cache-as-ram. Both areas are allocated from the persist-across-stages region of cache-as-ram so all stages utilizing cache-as-ram don't corrupt the page tables. The two paging-related areas are loaded by calling paging_enable_for_car() with the names of cbfs files to load the initial paging structures from. BUG=b:72728953 Change-Id: I7ea6e3e7be94a0ef9fd3205ce848e539bfbdcb6e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-24include/memory_info.h: Change part number field from 19 bytes to 21Richard Spiegel
DDR4 reserves 20 bytes for part number without termination. Therefor coreboot buffer for part number has to be increased to 21 bytes, to account termination. BUG=b:77943312 TEST=Build kahlee. Change-Id: I57aa8e06d907a1e6b11ce88f612a0d6c14b7c65b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-24arch/x86: add ENV_CACHE_AS_RAMAaron Durbin
Add ENV_CACHE_AS_RAM to indicate to compilation units if cache-as-ram is employed for that particular stage. BUG=b:72728953 Change-Id: I06dfa7afe2d967229549090d5aa95455687b0bb9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-24compiler.h: add __weak macroAaron Durbin
Instead of writing out '__attribute__((weak))' use a shorter form. Change-Id: If418a1d55052780077febd2d8f2089021f414b91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-23drivers/spi: reduce confusion in the APIAaron Durbin
Julius brought up confusion about the current spi api in [1]. In order alleviate the confusion stemming from supporting x86 spi flash controllers: - Remove spi_xfer_two_vectors() which was fusing transactions to accomodate the limitations of the spi controllers themselves. - Add spi_flash_vector_helper() for the x86 spi flash controllers to utilize in validating driver/controller current assumptions. - Remove the xfer() callback in the x86 spi flash drivers which will trigger an error as these controllers can't support the api. [1] https://mail.coreboot.org/pipermail/coreboot/2018-April/086561.html Change-Id: Id88adc6ad5234c29a739d43521c5f344bb7d3217 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-04-23cpu/x86: add paging_set_default_pat() functionAaron Durbin
Add paging_set_default_pat() which sets up the PAT MSR according to util/x86/x86_page_tables.go. Using page attribute types require a matching of the PAT values with the page table entries. This function is just providing the default PAT MSR value to match against the utility. BUG=b:72728953 Change-Id: I7ed34a3565647ffc359ff102d3f6a59fbc93cc22 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-23cpu/x86: expose and add paging helper functionsAaron Durbin
Add the following functions for use outside of the paging module: void paging_enable_pae_cr3(uintptr_t cr3); void paging_enable_pae(void); void paging_disable_pae(void); The functions just enable and/or disable paging along with PAE. Disassembly shows equivalent output for both versions. BUG=b:72728953 Change-Id: I9665e7ec4795a5f52889791f73cf98a8f4def827 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-23cpu/x86: move NXE and PAT accesses to paging moduleAaron Durbin
The EFER and PAT MSRs are x86 architecturally defined. Therefore, move the macro defintions to msr.h. Add 'paging' prefix to the PAT and NXE pae/paging functions to namespace things a little better. BUG=b:72728953 Change-Id: I1ab2c4ff827e19d5ba4e3b6eaedb3fee6aaef14d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-20rules: Define SIMPLE_DEVICE on x86 onlyPatrick Rudolph
Make sure to define __SIMPLE_DEVICE__ on x86 only, as other platforms currently doesn't have support for it. Fixes static.c devicetree compilation on non x86. Change-Id: I75fb038681a8edf119415705af5da9f999fd8225 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25721 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-20pci: Move inline PCI functions to pci_ops.hPatrick Rudolph
Move inline function where they belong to. Fixes compilation on non x86 platforms. Change-Id: Ia05391c43b8d501bd68df5654bcfb587f8786f71 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25720 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-17cbfs: Add cbfs_boot_load_file()T Michael Turney
Generalize cbfs_boot_load_struct() by passing in CBFS type Change-Id: I6e5f845cb4ce5b00f01a39619919f85e39028f19 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/25648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-04-16device/dram/ddr3: improve XMP supportDan Elkouby
- Fix offsets for supported CAS latencies - Add support for reading CWL and CMD rate from the profile Change-Id: Ie4f545ed1df92c146be02f56fea0ca9037478649 Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com> Reviewed-on: https://review.coreboot.org/25663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-16lib/bootmem: tightly couple bootmem_init to bootmem_write_memory_tableAaron Durbin
In https://review.coreboot.org/25383 people were confused about the ordering of bootmem calls w.r.t. when entries are exposed to the OS. To alleviate this add a notion of bootmem being initialized. In addition to that, only mark bootmem initialized when bootmem_write_memory_table() is called. Any other calls to bootmem before that will report an error on the console. Change-Id: I5bc31f555038ccabb82d902c54f95858679b1695 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-04-12include/memory_info.h: Change serial number field from 5 bytes to 4Raul E Rangel
dimm_info.serial had a strange contract. The SPD spec defines a 4 byte serial number. dimm_info.serial required a 4 character ascii string with a null terminator. This change makes the serial field so it matches the SPD spec. smbios.c will then translate the byte array into hex and set it on the smbios table. There were only two callers that set the serial number: * haswell/raminit.c: already does a memcpy(serial, spd->serial, 4), so it already matches the new contract. * amd_late_init.c: Previously copied the last 4 characters. Requires decoding the serial number into a byte array. google/cyan/spd/spd.c: This could be updated to pass the serial number, but it uses a hard coded spd.bin. Testing this on grunt, dmidecode now shows the full serial number: Serial Number: 00000000 BUG=b:65403853 TEST=tested on grunt Change-Id: Ifc58ad9ea4cdd2abe06a170a39b1f32680e7b299 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/25343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11lib/memrange: Introduce method to clone memrangePatrick Rudolph
Add a new method to clone an existing memrange with all of its entries. Required for new bootmem type LB_MEM_RAM_DONT_OVERLAP. Change-Id: I64b27bf2611ca310385ef680f030a3e4aa0c2680 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25582 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11src/lib/dimm_info_util.c: Add methods to convert from SMBIOS to SPDRaul E Rangel
AMD AGESA returns DIMM info in SMBIOS format. dimm_info expects the data in SPD format. These methods will be used to update amd_late_init.c so it sets the correct values. BUG=b:65403853 TEST=Built and booted grunt. Methods are not called in this commit. So they were tested with the later commit by verifying the output of dmidecode. Change-Id: Id9fa98e9aad83dfd0a86f45e18b3c312665dce9b Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/25412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-11drivers/intel/wifi: Add support for Harrison Peak (HrP)Subrata Banik
Move all Intel WIFI PCI ids into device/pci_ids.h file. TEST=HrP module is getting detected during PCI enumeration. Change-Id: Ia2d15f3f4a68887521ddbb1b99daf9d98cfa5c8b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-09device/dram/ddr2.c: Add methods to compute to identify dramArthur Heymans
DDR2 DIMMs are uniquely defined by SPD byte 64 till 72 and 93 till 98. Compute a crc16 over that data to provide a solid way to check DIMM identify. Reuse the crc16 function from ddr3.c to do this. Change-Id: I3c0c42786197f9b4eb3e42261c10ff5e4266120f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-09console: Expose vsnprintfDavid Hendricks
It's a standard function. Change-Id: I039cce2dfc4e168804eb7d12b76a29af712ac7a1 Signed-off-by: David Hendricks <dhendricks@fb.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/23616 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-05x86: Add function to modify CR3 registerNaresh G Solanki
Register CR3 holds the physical address of paging-structure hierarchy. Add functions to enable read/write of this register. Change-Id: Icfd8f8e32833d2c80cefc8f930d6eedbfeb5e3ee Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/25478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-03include/string: Add strrchrPatrick Rudolph
Copy strrchr from libpayload. To be used by Cavium's BDK or FDT parsers. Change-Id: Iab7981c25113ed16f1b8130de4935d30c29d2fa5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-04-03spi: Add helper functions for bit-bangingJulius Werner
Sometimes when bringing up a new board it can take a while until you have all the peripheral drivers ready. For those cases it is nice to be able to bitbang certain protocols so that you can already get further in the boot flow while those drivers are still being worked on. We already have this support for I2C, but it would be nice to have something for SPI as well, since without SPI you're not going to boot very far. This patch adds a couple of helper functions that platforms can use to implement bit-banging SPI with minimal effort. It also adds a proof of concept implementation using the RK3399. Change-Id: Ie3551f51cc9a9f8bf3a47fd5cea6d9c064da8a62 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/25394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-26soc/intel: Add KBL-S MCH and some KBL PCH supportGaggery Tsai
This patch adds the support for KBL-S MCH and Z270, H270, B250 and Q250 PCH chips. BUG=None BRANCH=None TEST=Boot with KBL-S CPU and B250/H270 PCHs. Change-Id: If03abb215f225d648505e05274e2f08ff02cebdc Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/25305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-03-23include: Update dimm_info documentationRaul E Rangel
Reference the JEDEC SPD spec and clarify some comments. BRANCH=dimm-info BUG=b:65403853 TEST=Documentation change only Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1f2a3a70919c34f17472904323ec5accdfc876be Reviewed-on: https://review.coreboot.org/25301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-15include/device: Add pci id for Intel EMMC for SKLBarnali Sarkar
Change-Id: I18315e48653b16b34d1473e6c0bb2a2662a1a2c3 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/23870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-07smbios: Extend Baseboard (or Module) Information (type2)Julien Viard de Galbert
Add more information on baseboard as described in SMBIOS Reference Specification 3.1.1. Change-Id: I9fe1c4fe70c66f8a7fcc75b93672421ae808bf1b Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 09:23:49 +0000