summaryrefslogtreecommitdiff
path: root/src/mainboard/asrock/h110m/include
AgeCommit message (Collapse)Author
2019-09-01mb/asrock/h110m: rewrite gpio config using macrosMaxim Polyakov
This format of PCH GPIOs configuration, unlike the raw DW0 and DW1 [1] registers values from the inteltool dump, is more understandable and makes the code much cleaner. The pad configuration in this patch was generated using the pch-pads-parser utility [2]. The inteltool dump before and after the patch is identical (see notes) Notes: 1. For some reason, GPIO RX State (RO) for the GPP_F4 and GPP_G10 changed the value to 0, but this doesn't affect the motherboard operation. Perhaps this is because PAD_CFG1_GPIO_DRIVER is set to PAD_CFG_GPI_INT(), and the pad is not actually connected. So far I haven't circuit diagram to check this out. 2. According to the documentation [1], the value 3h for RXEVCFG is implemented as setting 0h. 3. If the available macros from gpio_defs.h [3] can't determine the configuration of the pad, the utility [2] generates common _PAD_CFG_STRUCT() macros [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN [2] https://github.com/maxpoliak/pch-pads-parser/tree/stable_1.0 [3] src/soc/intel/common/block/include/intelblocks/gpio_defs.h Change-Id: I01ad4bd29235fbe2b23abce5fbaaa7e63c87f529 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-03-19mainboard: Add ASRock H110M-DVSMaxim Polyakov
This board is compatible with Intel Skylake and Kaby Lake generation processors. This patch contains the minimum configuration for booting and stable operation of the Ubuntu OS (18.04.1, Linux kernel 4.15). It is based on Intel RVP8 mainboard. Intel Kaby Lake FSP 3.6.0 is used to initialize CPU and PCH. Graphics init with libgfxinit. Works: - Integrated graphics (only DVI port, tested with 1920x1080); - PEG x16 (FSP must be configured with BCT to enable PEG); - all PCIe x1 slots; - all USB and SATA ports; - SuperIO COM port for console; - onboard audio. TODO: - other SuperIO functions; - onboard network chip; - suspend and resume; - documentation. Tested on Intel Core i5-6600 processor with Seabios (rel-1.12.0-10- g171fc89) and Tianocore/edk2 (vUDK2018-8-ge6eccfc) as a payload. Change-Id: I69396edc50948cf1d0da649241ce92171d32daf7 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>