summaryrefslogtreecommitdiff
path: root/src/mainboard/asrock
AgeCommit message (Collapse)Author
2015-10-24mainboard/asrock/e350m1: Update CMOS layout to match SIO changesTimothy Pearson
Change-Id: I3f1f33b50f788b6d57f1a7986c4bdb912426e4f0 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12125 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-23asrock/e350m1: disable unconnected GPP PCIe clocksFelix Held
connections checked by desoldering the FCH and looking at the PCB this lowers the power consumption by about 150-200mW measured on primary side based on change #5397 Change-Id: I986c4cc73a247994f2a47fdfd03f585069ca9385 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/11866 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2015-09-30amd/family14: Add k10temp thermal zone.Tobias Diedrich
The thermal sensor interface exposed in function 3 of the northbridge is a more convenient and faster way to access the processor-internal thermal sensor than using the SMBus/SB-TSI interface from the FCH, see the Family14 BKDG: "Tctl is a processor temperature control value used for processor thermal management. Tctl is accessible through SB-TSI and D18F3xA4[CurTmp]. Tctl is a temperature on its own scale aligned to the processors cooling requirements" Also on at least some of these boards the existing thermal zone is broken and always returns 40C (the default value if the SMBus read failed) because the SMBus muxing register (SmBus0Sel) is not set up correctly. Case in point: The fallback "smbus read failed" temperature is 40 C and the the logs taken from the board status repository for the Asrock E350M1 board all show: "ACPI: Thermal Zone [TZ00] (40 C)" e.g. http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asrock/e350m1/4.0-5054-gf584218/2013-12-20T20:56:20Z/kernel_log.txt#l390 and http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asrock/e350m1/4.0-7030-g6d7de4f/2014-10-16T15:34:19Z/kernel_console.txt#l404 and http://review.coreboot.org/gitweb?p=board-status.git;a=blob;f=asrock/e350m1/4.0-9989-gf2dfef0/2015-06-13T00:22:49Z/kernel_log.txt#l425 Example lm-sensors output with this patch on the pcengines APU1, on Linux 4.1.0-rc8+ (wiht both CONFIG_ACPI_THERMAL and CONFIG_SENSORS_K10TEMP enabled): acpitz-virtual-0 Adapter: Virtual device temp1: +54.0 C (crit = +100.0 C) k10temp-pci-00c3 Adapter: PCI adapter temp1: +54.0 C (high = +70.0 C) (crit = +100.0 C, hyst = +97.0 C) Change-Id: Id9c5b783ba424246816677099ec6651814e59f21 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10940 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-22coreboot: introduce commonlibAaron Durbin
Instead of reaching into src/include and re-writing code allow for cleaner code sharing within coreboot and its utilities. The additional thing needed at this point is for the utilities to provide a printk() declaration within a <console/console.h> file. That way code which uses printk() can than be mapped properly to verbosity of utility parameters. Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11592 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-14asrock/e350m1: Remove unused file `acpi/smbus.asl`Paul Menzel
Commit 8d80a3fb (ASRock DSDT: Split the ASRock DSDT) creates the file `acpi/smbus.asl` in the board directory, but includes the identical southbridge file in `dsdt.asl`. So, the file is actually unused. Therefore remove it. Change-Id: I26c5a2eaf3822d37da2402da65b278a3ee6d42f0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/10544 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05AMD K8 fam10: Refactor Kconfig SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
If SB_HT_CHAIN_ON_BUS0 is selected, HyperTransport chain for System Bus is the first to scan and it will be assigned with bus number 0. If HT_CHAIN_DISTRIBUTE is selected, each link will reserve a fixed range of bus numbers instead of assigning consecutive numbers across all the links. All fam10 have SB_HT_CHAIN_ON_BUS0 selected under northbridge. Follow-up can easily drop this if we find this is dictated by architecture. Change-Id: I8deddcb4c3fd679b6b27e2879d9dba3895c4dd6f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8366 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-24AGESA binaryPI boards: Drop annoying commentaryKyösti Mälkki
Same comments were already removed for the latest board, the amd/lamar. Change-Id: Ie244f838409c567c11f7444c9cf17de72e49dbb0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10283 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-23AGESA fam15x fam16x: Remove HAVE_ACPI_RESUMEKyösti Mälkki
Implementation corrupts low-memory on S3 resume path, rendering OS unstable. AMD was never able to pinpoint a revision that did not have the issue. Change-Id: I9656ac1bfe1412775a6152b9f995c4d4ebf57159 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10285 Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Tested-by: build bot (Jenkins)
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-10AGESA: Drop unused AGESA_MEM_TABLEKyösti Mälkki
These tables are not referenced anywhere, thus all comments about adjustments are void. Also drop stub AgesaReadSpd that is all commented out. Change-Id: I12233ea0dc4baaf36a75f359c52cc59c9b6dad79 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10143 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2015-04-23src/mainboard/*/*/board_info.txt: Added Release year for boardsMathias Friman
To simplify browsing the "Supported hardware" list, I added Release year for the hardware from asus, asrock, gigabyte, msi, via, tyan, intel, lenovo, apple, jetway and hp. Still several models and manufacturers to add information to. This is more of a proof-of-concept. The "Release year" will be shown in the wiki page. Change-Id: I6bc14ed06ac7c6b3c9f054b49f08cb9b3dc47947 Signed-off-by: Mathias Friman <mathias@workplays.se> Reviewed-on: http://review.coreboot.org/9963 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
This change switches all mainboard vendors and mainboards to be autoincluded by Kconfig, rather than having to be mentioned explicitly. This means, vendor and mainboard directories are becoming more "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree mainboards / components to be built with a given coreboot version (given that the API did not change) Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: Ib68ce1478a2e12562aeac6297128a21eb174d58a Reviewed-on: http://review.coreboot.org/9295 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-03-07AGESA: Use same HeapManager for all BiosCallOutsKyösti Mälkki
We do not allow platforms to mess around with memory layout. Change-Id: I316ff522c8833fa3b7ad20f2c5a9cae21f4174d8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8604 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-05mainboard: Do not redefine DRIVERS_PS2_KEYBOARD Kconfig variableAlexandru Gagniuc
Change-Id: Icc603dfe92360d978221a25ad28517da43942bea Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8498 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-16mainboard/cmos: Kill off unused boot_* parametersTimothy Pearson
Change-Id: I19d6b56e3ac5e6e7946648b97c86a223b748e3bd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8460 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Move ECC variables out of fallback mechanism byteTimothy Pearson
Change-Id: Icebc12d8f83494150a7bdd3adcc168d7b48b2e68 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8458 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/cmos: Delete obsolete commented parametersTimothy Pearson
Change-Id: Iccad79c142a7fcf89dd0fbebe8c07ad9ef019e91 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8459 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-01-17asrock/e350m1: Fix PCIe slot for x4 cardsKyösti Mälkki
Configuration for GNB GPP was incorrect, only PCIe x1 cards worked. Change-Id: I369bf6382080e6034ff138ac664c76b03280ca69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8229 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-10ACPI: Add acpi_is_wakeup_s3() for romstageKyösti Mälkki
This replaces acpi_is_wakeup_early(). Change-Id: I23112c1fc7b6f99584bc065fbf6b10fb073b1eb6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8187 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-09asrock/e350m1, lenovo/x2x0 Kconfig: fix indentationNicolas Reinecke
Change-Id: Ide09e129fd9400eb20f9b7bb3cd0e5d6d271e372 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8176 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-06mainboard: Drop print_ implementation from non-romcc boardsStefan Reinauer
Because we had no stack on romcc boards, we had a separate, not as powerful clone of printk: print_*. Back in the day, like more than half a decade ago, we migrated a lot of boards to printk, but we never cleaned up the existing code to be consistent. instead, we worked around the problem with a very messy console.h (nowadays the mess is hidden in romstage_console.c and early_print.h) This patch cleans up the mainboard code to use printk() on all non-ROMCC boards. Change-Id: I2383f24343fc2041fef4af65d717d754ad58425e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8111 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2015-01-06Remove AMD's "Release Content" doxygen from coreboot filesMartin Roth
These comments are left over and are not relevent in the coreboot code, but created a new section titled "Release Content" in the doxygen documentation produced by the coreboot code. In an effort to clean up the output, I'm removing these doxygen comments. Change-Id: I4d7be3313a2ab6c140b4f3afe70dffc4abba7bca Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8069 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-06mainboard/*/romstage.c: Fix 'lib/delay.c' inclusionEdward O'Callaghan
Use 'delay.h' header rather than directly including 'delay.c' source. N.B. Some amdfam10 and K8 boards are not included in this changeset since unrelated issues are woven in there. Change-Id: Ibc0c0e560d8eedaf5c3150f95ba72fe5dd8d6f3a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8086 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-06mainboard/*/romstage.c: Sanitize system header inclusionsEdward O'Callaghan
Fix system include paths to be consistent. Chipset support is part of the Coreboot 'system' and hence 'non-local' (i.e., in the same directory or context). One possible product of this, is to perhaps allow future work to do pre-compiled headers (PCH) on the buildbot for faster build times. However, this currently just makes mainboard's consistent. Change-Id: I2f3fd8a3d7864926461c960ca619bff635d7dea5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8085 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-04AMD Mainboards - PlatformGnbPcie.c: Fix Doxygen errorsMartin Roth
Remove PeiServices param for OemInitEarly - it doesn't exist in the function. Change-Id: I338aeb4128126f6e541815dc09bf8d23678081c8 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8073 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-04AMD Mainboards - platform_cfg.h: Fixes for doxygenMartin Roth
- Move @def BIOS_SIZE description to the next line - SB_GEN2 changed to SB_GPP_GEN2 - Move the SIO_HWM_BASE_ADDRESS description to the next line Change-Id: Ia3496b0108484f557627304553461932a100dfa5 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8071 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-20AGESA fam15tn fam15rl fam16kb: Add OemInitMid()Kyösti Mälkki
Change-Id: Icbad42168ec3afb7780c0c2ddc17aa405e08d693 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7825 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-20AGESA: Add OemCustomize hooks structureKyösti Mälkki
We should potentially provide an OEM platform hook to manipulate parameters around any entry point to AGESA. Use structure for such ops to avoid weak functions and lots of empty function stubs. Change-Id: I99bf7de8a1e2f183399d2216520a45d0c24fd64c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7824 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-20AGESA: Ignore error in OemCustomizeInitEarly()Kyösti Mälkki
It does not really matter if we continue or return after a failed assertion, system configuration is invalid anyway. Change-Id: I5ba47ee3fd6c5ff97b9229f8bfc9db08873b08ca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7823 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-20AGESA fam14: Add amd_initenv()Kyösti Mälkki
Not part of wrapper to AGESA, but workaround for enable_resources(). Also remove remains of comments in non-fam14 wrappers. Change-Id: I2526821ca283feb6a506b602b86f817f8b03b341 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7816 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-20AGESA: Add amd_initcpuio() and amd_initmmio()Kyösti Mälkki
These are not wrappers for AGESA as they do not enter vendorcode at all. We expect most of the added fixme.c file to be written without use of AMDLIB.h and parts relocated as northbridge enable_resources(). Change-Id: Iba6d59e2a7672349208e9a65fcd2cb1094ab7d50 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7815 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-19mainboard: Strip out some dead includesEdward O'Callaghan
Change-Id: I0079fa089ba863c6e447bcee3440a7e0ba0f2372 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7429 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2014-12-07Kconfig: Remove ACPI_SSDTX_NUM.Vladimir Serbinenko
Its scope is limited to a single mainboard and is only to go through ifdef. Kill it and move the value to the code. Change-Id: I76a87e2790d57dee8f37b51e33d0689fffd3a59d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7135 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA fam14: Move agesawrapper_amdinitmmio()Kyösti Mälkki
Enabling MMCONF PCI-e configuration access should be done before console_init(). This will likely move further to bootblock one day. Change-Id: I20c93fe6e79ef7e7981b2f1cd3c6b446feea0f4e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7163 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA: Trace execution with AGESA_EVENTLOG()Kyösti Mälkki
Change-Id: I5601ed92ca808603b0a9edad118ca54aa168aceb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7604 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA: Common agesawrapper for S3 resumeKyösti Mälkki
Change-Id: I27cd073331659e47d241a0ce249b2d080b4bab5c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7162 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA: Remove duplicate OemCustomizeInitEarly declarationsKyösti Mälkki
Change-Id: I59b2c3f235a6b30e68e78c2fe4065fbc0488bc4c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7158 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam15tn / fam15rl / fam16kb: Common agesawrapperKyösti Mälkki
Split FCH parts to southbridge/hudson. Change-Id: Ibe305fc3e47422523a57ffa9cf69cd401c786ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7159 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam15tn / fam15rl / fam16kb: Move LPC decode enable for serial portKyösti Mälkki
Move LPC decode enable out of agesawrapper.c. It should not be on the execution path of AP CPUs and function is not related to AGESA per se. Change-Id: I19d6a20fbc7a3d28601caa9aaa1d73d6930257ae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7602 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam14: Common agesawrapperKyösti Mälkki
Use copy of amd/persimmon. Change-Id: I7404cb164df9065bcdbaaf5367018870ea675adc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7157 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA: Report events with AGESA_EVENTLOG()Kyösti Mälkki
NOTE: For fam12 and fam14 ASSERT() is defined empty so execution may fall through critical failures. Change-Id: Ifef65d749d340f1df3a43b5fcb38c4315ef944e8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7154 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA: Use common header for agesawrapperKyösti Mälkki
Change-Id: I5189d0c55635aeb29553fd04a67490cfee3d88d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7153 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-26agesa/family16kb: Switch to per-device ACPIVladimir Serbinenko
Change-Id: I7d9cbbd1aeadecc1a4c91816df303c6cb4817fe3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7034 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-11-26agesa/family15tn: Switch to per-device ACPIVladimir Serbinenko
Change-Id: Icc2e7b66b3ff5f70b219a3e67494ce3df055c9d5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7033 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-25agea/family14: Switch to per-device ACPIVladimir Serbinenko
Change-Id: Icc663c28713f2d872bfeb1749303ce92db953bf5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7031 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-22amdfam10: Move to per-device ACPIVladimir Serbinenko
Change-Id: I9ce2333e1ea527843f83d411dea2a669263156c2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7027 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-14AMD: Move RAMBASE and RAMTOPKyösti Mälkki
There are no reasons to not load ramstage @ 0x100000. Boards with HAVE_ACPI_RESUME enabled have performance penalty in using excessive RAMTOP. For these boards, this change releases 11 MiB of RAM from CBMEM allocation to OS. Change-Id: Ib71995aba5e9332d0ec1626b3eb3b4ef6a506d1c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7094 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-07mainboard: Trivial - Make AGESA board include consistentEdward O'Callaghan
Change-Id: If6cb99469f56fff8f88b294b625f0a5205ec540b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7238 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 09:45:48 +0000