Age | Commit message (Collapse) | Author | |
---|---|---|---|
2011-03-01 | Use subsystem id from devicetree.cb instead of Kconfig and move | Sven Schnelle | |
all boards to the new config scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6421 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 | |||
2010-12-05 | W83627DHG/W83627EHG fixups for virtual LDNs. | Uwe Hermann | |
W83627DHG: - Add proper "virtual LDN" handling for the LDNs that need it (i.e., those that don't have their "enable" bit in bit 0 of the 0x30 register). - Fix various I/O masks in the pnp_dev_info[] array as per datasheet. Add missing PNP_IRQ0 to the W83627DHG_ACPI LDN. W83627EHG: - Similar to W83627DHG, improve the "virtual LDN" setup a bit (it was mostly implemented already, though). - Add missing PNP_IRQ0 to the W83627EHG_ACPI LDN. Also: Fix up devicetree.cb of all boards using W83627DHG/W83627EHG to adapt for the virtual LDNs. include/device/pnp.h: Add comment that 'function' (which refers to the LDN and should probably be renamed later) has to be at least 16 bits wide. In theory LDNs could use u8, but due to the virtual LDN info being encoded in the "high byte" of 'function' it must be at least u16. asrock/939a785gmh/romstage.c: Drop unused GPIO6_DEV. ibase/mb899/romstage.c: Use DUMMY_DEV instead of a specific LDN (serial port 1 in this case) to avoid confusion. The global registers manipulated there are accessible from any LDN. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6140 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 | |||
2010-11-14 | Add a target for the ASUS A8V-E Deluxe (trivial). | Uwe Hermann | |
For now this is a plain copy of the ASUS A8V-E SE target, I reported that most of the code also works (sort of) for the ASUS A8V-E Deluxe a long while ago, see http://www.coreboot.org/pipermail/coreboot/2008-March/031866.html http://www.coreboot.org/ASUS_A8V-E_Deluxe There will be a bunch of changes necessary though (devicetree.cb, mptable.c, ACPI, etc) which do not apply to the A8V-E SE, so we need an extra target. Also: Increase ID_SECTION_OFFSET on the VIA K8T890/K8M890 southbridge, as otherwise there will be build errors if the MAINBOARD_PART_NUMBER string gets too long (as is the case for "A8V-E Deluxe"). The error is: ld: section .id loaded at [00000000ffffffd2,00000000ffffffef] overlaps section .romstrap loaded at [00000000ffffff80,00000000ffffffd3] (both with stock Debian gcc and with xgcc) Increase ID_SECTION_OFFSET (default 0x10) to 0x80 as other southbridges do. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6072 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 |