summaryrefslogtreecommitdiff
path: root/src/mainboard/asus
AgeCommit message (Collapse)Author
2010-11-17Linux also needs the MMCONF area to be reserved either in E820 orTobias Diedrich
as an ACPI motherboard resource or it will not enable MMCONFIG and the extended pcie configuration area will be unaccessible: This patch adds the IORESOURCE_RESERVE flag to the APIC and MMCONF resource flags to do this. I also added a new resource for the mapped bios rom area just below 4GB. I'm not sure if the choice for the index parameter of new_resource() is correct though. Note that the bios rom decode is enabled in src/southbridge/via/vt8237r/vt8237r_early_smbus.c for the whole 4MB area (even though the comment says 1MB). Ruik: I extended the flash range to 16MB (This is what VT8237S can decode) Remove the MMCONFIG region reserve in the mainboard file (this patch makes it obsolete) Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6083 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17This problem was introduced withTobias Diedrich
http://tracker.coreboot.org/trac/coreboot/changeset/3953 Note that all corresponding DSDTs only ever check TOM2 against 0. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17The only southbridge having a pirq_assign_irqs function (needed forTobias Diedrich
CONFIG_PIRQ_ROUTE) so far is the amd cs5530. Add one for vt8237 too. Setting up the pci routing is important in case you want to boot DOS, OSes that don't support ACPI or MP tables and ROMs for add-in storage controllers may depend on this too. TODO: Fix the 4 routing links limitation in src/arch/i386/boot/pirq_routing.c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6081 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Forgot to remove one set of SET_FIDVID definesPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6078 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Move the SET_FIDVID* family of configuration options to Kconfig andPatrick Georgi
make their defaults more obvious. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6077 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14Add a target for the ASUS A8V-E Deluxe (trivial).Uwe Hermann
For now this is a plain copy of the ASUS A8V-E SE target, I reported that most of the code also works (sort of) for the ASUS A8V-E Deluxe a long while ago, see http://www.coreboot.org/pipermail/coreboot/2008-March/031866.html http://www.coreboot.org/ASUS_A8V-E_Deluxe There will be a bunch of changes necessary though (devicetree.cb, mptable.c, ACPI, etc) which do not apply to the A8V-E SE, so we need an extra target. Also: Increase ID_SECTION_OFFSET on the VIA K8T890/K8M890 southbridge, as otherwise there will be build errors if the MAINBOARD_PART_NUMBER string gets too long (as is the case for "A8V-E Deluxe"). The error is: ld: section .id loaded at [00000000ffffffd2,00000000ffffffef] overlaps section .romstrap loaded at [00000000ffffff80,00000000ffffffd3] (both with stock Debian gcc and with xgcc) Increase ID_SECTION_OFFSET (default 0x10) to 0x80 as other southbridges do. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6072 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14CK804/MCP55 devicetree.cb cosmetic and indentation fixes.Uwe Hermann
Add a few more comments for the entries, and also change the devicetree.cb files to the more compact and better readable variant with indentation level of 2 spaces (instead of random mix of tabs and spaces). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6071 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14Return 0, (as for 40pin cable if SB not found)Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6070 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14Move cable detect logic to a weak function in vt8237r_ide.c and addTobias Diedrich
an override function in m2v/mainboard.c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6069 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-12mainboard/asus/m2v: Set DDR2 voltage to 1.8VTobias Diedrich
The power-on default is 1.95V, set the DDR2 voltage to standards-conforming 1.8V. I also measured with a multimeter to confirm this. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6066 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-10Use the new mptable_write_buses() on the ASUS M2V.Tobias Diedrich
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6060 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-10Add mptable for ASUS M2V.Tobias Diedrich
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6059 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-09Add acpi tables and dsdt.Tobias Diedrich
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6051 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-09Add pirq table for ASUS M2V.Tobias Diedrich
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6050 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07DSDT.asl should not report the AMD SB600/SB700 RTC as Intel PIIX4Scott Duplichan
compatible. The extended cmos is accessed differently for AMD and Intel RTCs. Not sure what if any OS cares about this distinction, but non-Intel compatible seems like a safer way to report the AMD RTC. Tested with Win7 on Mahogany_fam10 and kino-780am2-fam10. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6046 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07Should be part of 6044. I forgot to add the directory :/Tobias Diedrich
This adds the m2v directory and necessary files to src/mainboards/asus and adjusts the Kconfig. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6045 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07This adds the m2v directory and necessary files to src/mainboards/asus andTobias Diedrich
adjusts the Kconfig. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6044 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07Remove empty files added by accident. Sorry about that.Rudolf Marek
Rudolf Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6037 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07This adds the VT8237A LPC device id and the pci_driver struct inTobias Diedrich
vt8237r_lpc.c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6035 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-06Remove comments that are obsolete since r6028.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6029 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.cPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6028 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05Various PIRQ/MPTABLE/ACPI Kconfig fixes.Uwe Hermann
- Use HAVE_ACPI_TABLES, HAVE_MP_TABLE, and HAVE_PIRQ_TABLE (instead of GENERATE_*) in the board's Kconfig file, as all other boards do. - Add missing HAVE_ACPI_TABLES/HAVE_MP_TABLE/HAVE_PIRQ_TABLE to boards which have the respective files. The only exception: EPIA-M700 doesn't select ACPI, as it doesn't have dsdt.asl. Added a comment that the user is supposed to run the 'get_dsdt' script and edit Kconfig afterwards. - Fix minor warning/error in src/mainboard/msi/ms9652_fam10/acpi_tables.c, now that the file is actually used. - msi/ms9652_fam10: use #include instead of Include() as we usually do now. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6027 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-31Remove definitions of ACPI_SSDTX_NUM to 0, that's the default anyway.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6007 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-31Remove incorrect IOAPIC lines from some mptable.c files.Uwe Hermann
- via/epia-n/mptable.c - intel/eagleheights/mptable.c (commented out anyway) - asus/p2b-d/mptable.c - asus/p2b-ds/mptable.c Some files still incorrectly contain some smp_write_ioapic() lines from the original mptable utility target (Supermicro P4DPE), which has one IOAPIC in the southbridge (Intel ICH3-S), two IOAPICs contained in the first P64H2, and two more in the second P64H2, i.e. 5 IOAPICs in total. However, none of the boards where this chunk of code is present has multiple IOAPICs (and even if they had, the PCI devices where those are located would probably be different anyway), so drop the incorrect mptable.c contents. Also drop the lines from the mptable utility, so that future mptable.c files don't incorrectly inherit any of this stuff. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Jonathan Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6006 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-30Mptable related fixes for ASUS P2B-DS.Uwe Hermann
- Add "select IOAPIC" in the board's Kconfig file. - Set CONFIG_MAX_PHYSICAL_CPUS to 2 on the board. There are two CPU sockets (Slot 1) and each CPU can only have one core, multi-core CPUs didn't exist in that era (CONFIG_MAX_CPUS was set to 2 already). - Drop useless/duplicated enable_lapic() call from ASUS P2B-DS's romstage.c, that function is always called if either CONFIG_SMP and/or CONFIG_IOAPIC are set. - Rework ASUS P2B-DS mptable.c to fix a number of things: - Convert it to use mptable_write_buses() as all mptable.c files should do. - Fix incorrect IOAPICID (it's 0x11 for the external 82093AA IOAPIC). - Fix a bunch of hardcoded bus IDs, remove incorrect entries, etc. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6004 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-28Add IOAPIC support for Intel 82371EB and fixup SMP on ASUS P2B-D.Uwe Hermann
- Add enable_intel_82093aa_ioapic() which enables IOAPIC usage in the Intel 82371EB southbridge (sets the proper chip-select) and sets an IOAPIC ID. - We only call enable_intel_82093aa_ioapic() if a board does "select IOAPIC" as on 82371EB-based boards the IOAPIC is an external chip (not integrated in the southbridge) and it's only populated on multi-CPU boards. That is, we cannot unconditionally enable it, only on SMP-capable boards. - Due to the reason explained above, remove "select IOAPIC" from src/southbridge/intel/i82371eb/Kconfig, and add it to src/mainboard/asus/p2b-d/Kconfig. - Also set CONFIG_MAX_PHYSICAL_CPUS to 2 on ASUS P2B-D. There are two CPU sockets (Slot 1) and each CPU can only have one core, multi-core CPUs didn't exist in that era (CONFIG_MAX_CPUS was set to 2 already). - Drop useless/duplicated enable_lapic() call from ASUS P2B-D's romstage.c, that function is always called if either CONFIG_SMP and/or CONFIG_IOAPIC are set. - Rework ASUS P2B-D mptable.c to fix a number of things: - Convert it to use mptable_write_buses() as all mptable.c files should do. - Fix incorrect IOAPICID (it's 0x11 for the external 82093AA IOAPIC). - Fix a bunch of hardcoded bus IDs, remove incorrect entries, etc. This is build-tested on ASUS P2B-D, and also boot-tested successfully there. On Linux I now get two entries in /proc/cpuinfo (where only one appeared before this patch), i.e. both populated CPUs are found. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5998 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-27Enable CK804 AC'97 audio interface and explicitly enable NIC on A8N-E.Jonathan Kollasch
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5997 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-27Convert ck804_early_smbus.c to a separately compiled unit.Jonathan Kollasch
Additionally, make the second SMBus more accessible in romstage. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5994 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-26We need to call smp_write_lintsrc() instead of smp_write_intsrc() forTobias Diedrich
local ints. This is wrong in most coreboot mptables, probably all generated by util/mptable/mptable.c. After fixing this now XP can boot in MPS mode on my M2V. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5992 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-26Convert all ck804-based boards to tiny bootblock.Jonathan Kollasch
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5991 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-25Factor out common mptable code to mptable_init().Uwe Hermann
- Drop sig[], oem[], and productid[] fields in all mptable.c files, no longer needed. The sig[] is always the same ("PCMP"), the oem[] is currently also always the same ("COREBOOT"), and productid is being passed into mptable_init() directly as string now. - LAPIC_ADDR is passed in as parameter, too. While at the moment it's always the same value that is passed in, the LAPIC base address could also be relocated theoretically, so keep it as parameter for now. - Fix a few productid entries, they were (partially) incorrect: - DK8S2 (was "DK8X", copypaste) - 939A785GMH (was "MAHOGANY", copypaste) - X6DHE-G (was "X6DHE", incomplete board name) - H8DME-2 (was "H8DMR", copypaste) - H8QME-2+ (was "H8QME", incomplete board name) - X6DHE-G2 (was "X6DHE", incomplete board name) - X6DHR-iG2 (was "X6DHR-iG", incomplete board name) - GA-M57SLI-S4 (was "M57SLI", incomplete board name) - KINO-780AM2 (was "KINO", incomplete board name) - DL145 G1 (was "DL145G1", small fix as per vendor website) - DL145 G3 (was "TREX", wrong board name) - DL165 G6 (was "HP DL165 G6", drop vendor) - S2912 (was "S2895", copypaste) - VT8454c (was "VIA VT8454C", drop vendor, lower-case "c") - EPIA-N (was "P4DPE", copypaste) - pc2500e (was "PC2500", incorrect name) - S1850 (was "S2850", copy-paste) - MS-7135 (was "MS7135") - MS-9282 (was "MS9282") - MS-9185 (was "MS9185") - MS-9652 (was "K9ND MS-9652") - Ultra 40 (was "ultra40") - E326 (was "E325", copypaste) - M4A785-M (was "TILAPIA", copypaste) - P2B-D (was "ASUS P2B-D", drop vendor) - P2B-DS (was "ASUS P2B-DS", drop vendor) - Adapt the mptable utility to use mptable_init() too. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-24Running a checked build of Windows is needed for understanding its various ↵Scott Duplichan
BIOS related BSODs. Win7 checked build complains when running coreboot+seabios: FADT revision inconsistent with length. Revision: 0x1 Length: 0xf4 Expected Length: 0x74 Change the FADT revision from 1 to 3 to match its length and prevent the Windows checked build assert. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5985 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Remove various .c #includes from Intel i810/i82801ax/i82801bx boards.Uwe Hermann
This is pretty much the same mechanism as in r5929. - Use 'romstage-y' to turn i82801ax_early_smbus.c and i82801bx_early_smbus.c into distinct compilation units, and don't #include the files anymore in romstage.c files. - Ditto for northbridge/intel/i82810/raminit.c, and northbridge/intel/i82810/debug.c. - Add various header files which are now needed, drop unused includes. - Make functions that need to be visible non-static. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5951 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Convert all Intel i810 boards to CAR.Uwe Hermann
- Drop "select ROMCC" from the boards, as well as early_mtrr stuff. - Add "select CACHE_AS_RAM" to socket_PGA370/Kconfig, as well as the usual DCACHE_RAM_BASE and DCACHE_RAM_SIZE variables. - In socket_PGA370/Makefile.inc add: cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc - Other smaller related fixes. Abuild-tested and boot-tested on MSI MS-6178. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5949 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-12We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.Uwe Hermann
As both ioapic.h and acpi.h define a macro named "NMI", rename one of them (NMI -> NMIType in acpi.h). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-09Remove various .c #includes from Intel 440BX/82371EB boards.Uwe Hermann
- Use 'romstage-y' to turn i82371eb_early_pm.c and i82371eb_early_smbus.c into distinct compilation units, and don't #include the files anymore in romstage.c files. - Ditto for lib/debug.c, northbridge/intel/i440bx/raminit.c, and northbridge/intel/i440bx/debug.c. - Add various header files which are now needed. - Make functions that need to be visible non-static. - Drop a remaining "select ROMCC" from a 4440BX board. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Idwer Vollering <vidwer@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5929 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-07Remove duplicate line from pci_ids.h.Jonathan Kollasch
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Jonathan Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5920 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-07Convert all Intel 82371AB/EB/MB based boards to TINY_BOOTBLOCK.Uwe Hermann
Also: Unfortunately Intel 440BX + 82371AB/EB/MB boards can have their ISA device on various PCI bus:device.function locations. Examples we encountered: 00:07.0, 00:04.0, or 00:14.0. Thus, instead of hardcoding PCI bus:device.function numbers such as PCI_DEV(0, 7, 0), we now simply find the ISA device via PCI IDs, which works the same on all boards. As an additional benefit this patch also gets rid of one .c file include in romstage.c. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5918 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-06Convert all Intel 440BX boards to Cache-as-RAM (CAR).Uwe Hermann
- Add "select CACHE_AS_RAM" in src/cpu/intel/slot_1/Kconfig. - Add the following in src/cpu/intel/slot_1/Makefile.inc: cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc - Remove "select ROMCC" from all 440BX board Kconfig files. - Drop all early_mtrr_init() calls, that's done by CAR code now. Various small fixes were needed to make it build: - Drop do_smbus_recv_byte(), do_smbus_send_byte(), do_smbus_write_byte(), those were never called anyways. - Remove the "static" from the main() functions in romstage.c files. - Always call dump_spd_registers() from the 440BX debug.c, but use "#if CONFIG_DEBUG_RAM_SETUP" to only have that code if RAM debugging is enabled in menuconfig. - Drop all "lib/ramtest.c" #includes and ram_check() calls (even if commented out) from romstage.c's, as we've done for most other boards. - Add missing #includes or prototypes. Some of the prototypes will be removed later when we get rid of the #include'd .c files. Abuild-tested for all boards, and boot-tested on A-Trend ATC-6220. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5917 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05attached patch moves a couple more config flags out of romstage:Patrick Georgi
CK804_USE_NIC, CK804_USE_ACI, CK804_NUM. MCP55_USE_NIC, MCP55_USE_ACI, MCP55_NUM. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Pter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5912 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05- move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1Patrick Georgi
- move EHCI_BAR and EHCI_DEBUG_OFFSET to Kconfig to be set by USB debug port enabled southbridges - drop USB debug code includes from romstage.cs and use romstage-srcs in the build system instead Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5911 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05Remove lib/ramtest.c-include from all CAR boards.Patrick Georgi
Remove many more .c-includes from i945 based boards. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5910 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-02Allow selecting the physical USB Debug Port on AMD SB700.Uwe Hermann
The AMD SB700 allows changing the physical USB port to be used as USB Debug Port, implement support for this. Also, fix incorrect PCI device of the SB700 EHCI device. Actually, the SB700 has _two_ EHCI devices (D18:F2 and D19:F2), but for now we only use D18:F2. Our generic USBDEBUG code cannot handle multiple EHCI PCI devices currently, AFAICS. Hook up all SB700 boards to the CONFIG_USBDEBUG_DEFAULT_PORT facility. Untested, but should work. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5907 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-02Don't define K8_4RANK_DIMM_SUPPORT, nothing uses it.Jonathan Kollasch
All these boards define QRANK_DIMM_SUPPORT anyway, which is probably what was meant. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5905 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-01Move CACHE_AS_RAM_ADDRESS_DEBUG out of romstage.c into Kconfig,Patrick Georgi
rename it slightly, make it visible only on relevant northbridges, drop it entirely from via boards (as they seem to have picked it up from AMD code without using it themselves), and make it default to false for all boards. Some romstages used to set this to "true" (ie. "print debug output"), but I didn't follow up on it in Kconfig - if you need it to debug CAR, enable it yourself. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5898 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-28Remove redundant HW_MEM_HOLE_SIZEK and HW_MEM_HOLE_SIZE_AUTO_INC settings.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5875 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-25Drop some useless "../../../" in #includes (trivial).Uwe Hermann
Build-tested using abuild. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5844 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-24Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.Uwe Hermann
Without a (currently) dummy set_debug_port() function the build fails, this may or may not be fixed differently in the future. Manually build-tested on all SB600/SB700 boards, and tested on hardware on one SB600 board I own, works fine. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5833 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-21Cut the crap.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5823 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-19Make ASUS P3B-F RAM init actually work by enabling SPD access.Uwe Hermann
On this board all reads from SPD return 0xff by default, there's a custom GPIO fiddling needed to enable access to the SPD SMBus offsets at 0x50-0x53. While coreboot actually sort of booted sometimes before r5193, that was just sheer luck as the RAM init was hardcoded in certain ways. Since the proper, more heavily SPD-based RAM init the brokenness of the ASUS P3B-F RAM init was becoming visible. This patch uses GPIOs to enable access to the SPD SMBus offsets, and resets the GPIOs again after RAM init (this is needed to allow for lm-sensors to work, for example). Tested successfully on hardware. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Idwer Vollering <vidwer@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5819 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-23 10:20:56 +0000