summaryrefslogtreecommitdiff
path: root/src/mainboard/asus
AgeCommit message (Collapse)Author
2018-12-19mb/asus/maximus_iv_gene-z: Select NO_UART_ON_SUPERIOTristan Corrick
This board doesn't have a UART on the super I/O. Selecting this option speeds up boot time from ~493 ms to ~416 ms. Change-Id: I1d84f373831381da79022638e1082adf68f47aad Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-19mainboard: Remove useless include <device/pci_ids.h>Elyes HAOUAS
Change-Id: I4ee3cc42302c44dc80ae1f285579a4d1775aec16 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-12-18mb/asus/kgpe-d16: Set ASpeed GPIO SPD mux lines during bootTimothy Pearson
When the BMC firmware module is installed on the KGPE-D16, the RAM SPD multiplexer lines are disconnected by hardware from the SP5100 GPIOs and attached to BMC GPIO lines instead. Set the BMC GPIOs to match the state of the SP5100 GPIOs during RAM setup. Change-Id: Ia251334ae44668c2260d8d2e816f85f1f62faac5 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/19820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-03mb/asus/am1i-a: add missing GPIO IO portsKevin Cody-Little
This makes the mainboard able to boot again. Change-Id: Id96fbfd5c815431dba2f030fca62a5ea16b97393 Signed-off-by: Kevin Cody-Little <kcodyjr@gmail.com> Reviewed-on: https://review.coreboot.org/c/29994 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30cpu/intel/common: Use a common acpi/cpu.asl fileArthur Heymans
Change-Id: Ifa5a3a22771ff2e0efa14fb765603fd5e0440d59 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian
2018-11-28mb/*/*/Kconfig: Remove useless commentElyes HAOUAS
Change-Id: Ibdff50761a205d936b0ebe067f418be0a2051798 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hellsenberg <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: David Guckian Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-23mb: Set coreboot as DSDT's manufacturer model IDElyes HAOUAS
Field 'OEMID' & "OEM Table ID" are related to DSDT table not to mainboard. So use macro to set them respectvely to "COREv4" and "COREBOOT". Change-Id: I060e07a730e721df4a86128ee89bfe168c69f31e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian
2018-11-21ACPI: Fix DSDT's revision fieldElyes HAOUAS
DSDT revision is =1 for ACPI v1 and =2 for greater ACPI version. This will cause the AML interpreter to use 32-bit integers and math if the version is 1, and 64-bit if the version is >=2. Current spec version is 2 for ACPI 6.2-a. Change-Id: I77372882d5c77b7ed52dcdd88028403df6f6fa7f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29626 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-18mb/asus/p5qc: Add p5ql_pro mainboard as variantAngel Pons
Working: - SATA on southbridge ports - SATA on Marvell IDE controller ports - USB - COM1 - PS/2 keyboard - DDR2 DIMMs - PCIe x16 PEG port - PCIe x1 ports - PCI ports - NIC (MAC address needs to be set in Kconfig or in a CBFS file) - S3 resume - Green audio line out connector (the rest is untested) Not working: - Floppy port. Does not seem to be mainboard-specific, though. Untested: - EHCI debug TODO: - Add documentation Change-Id: I6ed434a691e8ef2a61e0acb1f986a59b8e1ad818 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/25691 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-17src/mb/asus/p5qc/gpio.c: Allow specifying a gpio.c in KconfigAngel Pons
Even though these two mainboards use the same gpio.c file, other boards such as the p5ql_pro do not. Change-Id: I2f7c8c12cb1bdcf47f3b4d4cef0b11e44a5b8863 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/29447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-16src: Remove unneeded include <cbfs.h>Elyes HAOUAS
Change-Id: Iab0bd1c5482331a0c048a05ab806bf5c4dbda780 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29303 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src/mainboard: Remove unused "HW_MEM_HOLE_SIZE_AUTO_INC"Elyes HAOUAS
Change-Id: I10e89de270a20dbd28647e8b0f8a2425c515b350 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-16src: Remove unneeded include <lib.h>Elyes HAOUAS
Change-Id: I801849fb31fe6958e3d9510da50e2e2dd351a98d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src: Get rid of duplicated includesElyes HAOUAS
Change-Id: I252a1cd77bf647477edb7dddadb7e527de872439 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetreePeter Lemenkov
Change-Id: Ic9620cfa1630c7c085b6c244ca80dc023a181e30 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-12mb/*/*: Harmonise FD and devicetree on boards featuring ICH7Arthur Heymans
On some boards the devicetree and Function Disable register did not match. In this case the FD values are put in the devicetree as these were the values that were actually used in practice. A complete devicetree will make it easier to automatically disable devices in ramstage. Change-Id: I1692ca5f490ea84e2fc520d3f66044ad7514f76e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-11-12intel/i945: Factor out ram init time stampsPaul Menzel
Instead of having the code for the RAM init time stamps in each mainboard’s `romstage.c`, factor it out to the northbridge code, done in commit 771328f7 (intel/i945: add timestamps in romstage). Change-Id: Ibb699a1fea2f0b1f3c6564d401542d2fb3249f5a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17994 Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-12src: Remove unneeded include "{arch,cpu}/cpu.h"Elyes HAOUAS
Change-Id: I17c4fc4e3e2eeef7c720c6a020b37d8f7a0f57a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-05mb/asus/p5qc: Fix spelling of MarvellJonathan Neuschäfer
Marvell is the chip company, Marvel makes comic books. Change-Id: I437ac0d4fc706fbb62a0a74ca74a197dba4499fb Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/29347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-11-05mainboard: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: Ib3aafcc586b1631a75f214cfd19706108ad8ca93 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29285 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-05amd: Fix non-local header treated as localElyes HAOUAS
Change-Id: I0668b73cd3a5bf5220af55c29785220b77eb5259 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29103 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-05src/mainboard: Remove irrelevant conditional statementElyes HAOUAS
Using a conditional statement to return 0 or 1 depending on a logic value is unnecessarily complex. Change-Id: I449ce2b71b72374de5ec4986f9cc9f91a67856ee Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29265 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-04src/mb/asus/p5qc: Fix some mistakesAngel Pons
There are some small mistakes in these recently-added mainboards: - board_info.txt: Lists board socket incorrectly. - cmos.default: Loglevel was decreased some time ago. - devicetree.cb: Spelling mistake. - Kconfig: Mainboard name does not have a hyphen. Change-Id: I08d9b06e79683acd3994b84647bce401ed6741e2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/29446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-10-31reset: Finalize move to new APINico Huber
Move soft_reset() to `southbridge/amd/common/` it's only used for amdfam10 now. Drop hard_reset() for good. Change-Id: Ifdc5791160653c5578007f6c1b96015efe2b3e1e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-23src: Remove unneeded whitespaceElyes HAOUAS
Change-Id: I6c77f4289b46646872731ef9c20dc115f0cf876d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-22amdfam10: Convert to `board_reset()`Nico Huber
And here comes the mess... This just renames do_hard_reset() to do_board_reset() and keeps current behaviour. As these are never called from chipset or board code but only from common code, it's likely that their implementations are untested and not what we actually want. Also note, that sometimes implementations for rom- and ramstage differ considerably. Change-Id: Icdf55ed1a0e0294933f61749a37da2ced01da61c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29058 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-18mb: Fix non-local header treated as localElyes HAOUAS
Change-Id: Ib39305effdb00e032ca07e6d0e0d84cdf3dcf916 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-18mb: Replace MSR addresses with macrosElyes HAOUAS
Change-Id: I020431ba8eb61f5ce256088b919c049985331d64 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-18cpu/amd: Use common AMD's MSRElyes HAOUAS
Phase 1. Due to the size of the effort, this CL is broken into several phases. Change-Id: I0236e0960cd1e79558ea50c814e1de2830aa0550 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-15mb/asus/p5q_pro: Add mainboardArthur Heymans
This mainboard is quite similar to the p5qc. The main differences being a second PEG slot, the IDE slot and being DDR2 only. The following was tested: - both PEG slots populated (coreboot sets legacy VGA decoding on the GPU in the black slot) - USB - Ethernet NIC - PS2 Keyboard - COM1 - S3 resume Change-Id: I49a4bca4256e2a905aff3252eca76387c81152c1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/29102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-15drivers/net/atl1e: Add driverArthur Heymans
A shortcoming of this driver is that if multiple devices with the same PCI ID are present and don't have an eeprom, they would all get the same macadress set. The r8168 driver deals with such cases so it should be easy to implement if needed. Change-Id: I5c32df00e25453c350a45e7f1ee6834b89c4289f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-15mb/asus/p5qc: Add mainboardArthur Heymans
SeaBIOS does not seem to like the Marvel IDE controller, so disabled SeaBIOS support for ATA. It works fine in Linux afterwards. Working: - SATA on southbridge port - SATA on marvel IDE controller ports (only in Linux) - USB - COM1 - PS2 Keyboard - DDR2 DIMMs - PCIe x16 PEG port - PCI port - NIC (needs a driver to set macaddress) - S3 resume Not working: - SeaBIOS with ATA support (long timeout marvel controller so disabled) - DDR3 fails because the proper clock signal does not get enabled. Even when fixing this it fails later or during memtest, so it should be considered unsupported for now Untested: - PCIe x1 ports (expected to work) - sound (expected to work) TODO: add documentation Change-Id: I4a81940707566776bd048904ca1387fea741fece Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-09-25mb: Use 'unsigned int' to bare use of 'unsigned'Elyes HAOUAS
Change-Id: I3a8e077656df02912b4e67c3947bd5af054a18bf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-20mb/asus/kfsn4-dre: Use common pnp_{enter,exit} functionsElyes HAOUAS
Change-Id: I4b0577bf3c00307733a1096749c1835d86764f29 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-16mb/*/*/cmos.default: Harmonise CMOS files syntaxElyes HAOUAS
These files are being updated to match the prevailing style of cmos.default files. Change-Id: I47d31d6fec8c9eb856aed0c63824d9556b7705e4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15mb/*/*/cmos.default: Decrease debug_level to 'Debug'Elyes HAOUAS
Used default console log level is 7 in src/console/Kconfig. So let cmos.default use the same level as default. Change-Id: Ia39ee457a8985142f6e7a674532995b11cb52198 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-13src: Get rid of non-local header treated as localElyes HAOUAS
Change-Id: I2c5edadfd035c9af08af9ee326a5a2dc8b840faa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13src/mb: Remove some unneeded includesElyes HAOUAS
Change-Id: I3108193c0e0b644cecb74ae0c7a7b54e24a75b58 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13mb: Get rid of unneeded include <cbmem.h>Elyes HAOUAS
Change-Id: I80dd65484fd52e9048635091fb20a123e959e999 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27869 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-12mb/asus/maximus_iv_gene-z: Add VBTTristan Corrick
The file `data.vbt` matches the VBT in the latest version of the vendor firmware (version 3603). Tested with Linux 4.9 and everything works as expected. Change-Id: I8e3b1d274ac0df63989d966f477013e780611fa1 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/28050 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09src/mainboard: Fix typoElyes HAOUAS
Change-Id: Ief6a04ccb63658b5fb03cd1d298bf00948cf7410 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-05southbridge/intel/bd82x6x/Kconfig: Do not include any IFD by defaultAngel Pons
Since only a handful of boards have descriptor blobs in the tree, it makes no sense to have `HAVE_IFD_BIN` enabled by default then disabled on each mainboard. This patch flips the default value of said variable, rendering all current overrides unnecessary. The few boards which have an IFD in the blobs repo use `select HAVE_IFD_BIN` to enable adding the IFD by default. Since `HAVE_ME_BIN` depends on `HAVE_IFD_BIN`, the former has been removed alongside the latter, and has been added to the boards with a ME blob as `select HAVE_ME_BIN`. Both `HAVE_IFD_BIN` and `HAVE_ME_BIN` have been removed from autoport as well. Change-Id: I330c4886f8bea4b1a8ecad6505a0e5cc381654d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-03mainboard: Add ASUS P8H61-M LXTristan Corrick
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with kernel 4.9. This code is based on the output of autoport. The file `data.vbt` matches the VBT in the latest version of the vendor firmware (version 4601). This board works well under coreboot. A list of what works and what doesn't can be found in the documentation part of this commit. To summarise: the only known issues are that S3 suspend/resume doesn't work, and that there is no automatic fan control via the super I/O. Change-Id: I2a0579f486d3a44de2dd927fa1e76b90c3b48f62 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-25drivers/tpm: Add TPM ramstage driver for devices without vboot.Philipp Deppenwiese
Logic: If vboot is not used and the tpm is not initialized in the romstage makes use of the ramstage driver to initialize the TPM globally without having setup calls in lower SoC level implementations. * Add TPM driver in ramstage chip init which calls the tpm_setup function. * Purge all occurrences of TPM init code and headers. * Only compile TIS drivers into ramstage except for vboot usage. * Remove Google Urara/Rotor TPM support because of missing i2c driver in ramstage. Change-Id: I7536c9734732aeaa85ccc7916c12eecb9ca26b2e Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24905 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-09src/mb: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Iedc2e48349e40e94863c8080d11e11dbe6084c9d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-02src/mb: Fix non-local header treated as localElyes HAOUAS
Also remove some unnedded includes. Change-Id: I036208a111d009620d8354fa9c97688eb4e872ad Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-29sb/intel/i82801{g,j}x: Automatically generate ACPI PIRQ tablesArthur Heymans
Both southbridges need to be done at once since this southbridge code is used for different northbridges, which fails to compile when done separately. This needs an acpi_name functions in the northbridge code to be defined. TESTED on Intel DG43GT: show correct PIRQ ACPI entries in /sys/firmware/acpi/tables/SSDT. Change-Id: I286d251ddf8fcae27dd07011a1cd62d8f4847683 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-23mb/asus/p8h61-m_pro: Add new mainboardAngel Pons
Tested with GRUB 2.02 as a payload, booting Arch Linux as well as Debian. This code is based on the output of autoport as well as other mainboards supported in coreboot already. Working: - Serial port I/O - S3 suspend/resume. Untested with SeaBIOS since it failed to resume on a similar board. It is likely to be due to low memory corruption, but I have not worked on it. - USB ports and headers - USB3 ports attached to the ASM1042 controller. SeaBIOS can boot from them, and it is likely GRUB can detect devices on those ports as well. The chip has a small SPI flash nearby, which seems to hold an Option ROM. - Gigabit Ethernet - Integrated graphics (libgfxinit) - VGA BIOS for integrated graphics init - PCIe x16 graphics - PCIe x1 - SATA controller - Hardware Monitor - Fan Control (fancontrol on linux works well) - Native raminit - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. - NVRAM settings. Only debug_level has been tested. Untested: - DVI port. It can detect a "fake" display, that is, an EEPROM connected to the DVI port. Thus, gma-mainboard.ads has been setup accordingly. - PS/2 port. - Audio: Only rear output (green) has been tested. - EHCI debug. - Parallel port header. - Non-Linux OSes - ACPI thermal zone and fan control (probably not working) Not working: - Booting from devices attached to the ASM1061 controller. Devices on ports work fine once Linux has loaded. - Any SATA devices with Tianocore (payload issue) Change-Id: I7e89ebe43a2e1ff0308f4876e98bbf2f5a0d85f2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/26419 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14src: Get rid of unneeded whitespaceElyes HAOUAS
Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-12drivers/intel/gma: Unify VBT related Kconfig namesNico Huber
Shuffle words and drop the _DATA_FILE suffix. Change-Id: I0b0d50ea729e5580c0bc7b43f250ff387ce59cfc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>