summaryrefslogtreecommitdiff
path: root/src/mainboard/bcom
AgeCommit message (Collapse)Author
2009-10-26Add kconfig menus for most chipset VIDEO_MB values.Uwe Hermann
VIDEO_MB is a variable that defines how many MB of RAM will be used for onboard graphics frame buffer. It's northbridge-dependent which values for CONFIG_MB are valid (but not board-dependent). This patch adds choices for menuconfig to select the VIDEO_MB value for: - Intel 82810 - Intel 82830 - VIA CN400 - VIA CN700 Note: CN400 and CN700 are based on the CX700 datasheet, not sure if they're correct. If somebody has CN400 and CN700 datasheets, please verify. We drop all per-board VIDEO_MB variables in per-board Kconfig files as there's a northbridge-specific option/default now (plus the user can override the value if needed in menuconfig). As CONFIG_MB is chipset-specific but not board-specific (and never was), filter it in util/compareboard/compareboard, we don't need to match those values. Finally, put "CPU", "Northbridge", "Southbridge", "Super I/O", and "Devices" sections into the "Chipset" menu, where NB-specific options will appear if you select a board using a certain NB, SB-specific options would appear in the "Southbridge" section etc. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4866 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/Peter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4803 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop"Peter Stuge
abuild tested Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4791 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
with the respective board. Of course, the user can still override the size in menuconfig. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4790 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16Drop unused and useless CONFIG_MAX_PCI_BUSES.Uwe Hermann
It was added by rsmith in r2273 on 20060424, when pci_locate_device() in src/arch/i386/include/arch/romcc_io.h in fact scanned all busses: - for(; dev <= PCI_DEV(255, 31, 7); dev += PCI_DEV(0,0,1)) { + for(; dev <= PCI_DEV(CONFIG_MAX_PCI_BUSES, 31, 7); dev += PCI_DEV(0,0,1)) { Today this looks like: for(; dev <= PCI_DEV(255|(((1<<CONFIG_PCI_BUS_SEGN_BITS)-1)<<8), 31, 7); dev += PCI_DEV(0,0,1)) { and CONFIG_MAX_PCI_BUSES is never used anywhere. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4789 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
to build, but by default all the tables that are available are built. Make PIRQ table build for qemu. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-07Enable full ROM access on AMD CS5530(A) (needed for CBFS).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4731 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-07More boards in kconfig, and moved -O2 flag for romcc intoPatrick Georgi
ROMCCFLAGS, so boards can override it where necessary. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4730 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-04This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi
Both were only really used in pre-cbfs, as the payload's size isn't relevant for the build process anymore. Various calculations in {no,}failovercalculation.lb are adapted accordingly. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4720 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-04Add initial kconfig support for all AMD GX1 boards.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4719 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-03Remove:Patrick Georgi
- CONFIG_CBFS - anything that's conditional on CONFIG_CBFS == 0 - files that were only included for CONFIG_CBFS == 0 In particular: - elfboot - stream boot code - mini-filo and filesystems (depends on stream boot code) After this commit, there is no way to build an image that is not using CBFS anymore. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4712 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-23simplify source tree hierarchy: move files from sdram/ and ram/ to lib/Stefan Reinauer
It's only three files. Also fix up all the paths (Gotta love included C files) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4661 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12Kconfig!Patrick Georgi
Works on Kontron, qemu, and serengeti. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> tested on abuild only. Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-11Enable CBFS everywhere. All boards compiled for me (abuild tested),Patrick Georgi
and we will fix issues as they appear. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30the tool chain settings should not be in renamed (as they will never live inStefan Reinauer
Kconfig) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30This patch unifies the use of config options in v2 to all start with CONFIG_Stefan Reinauer
It's basically done with the following script and some manual fixup: VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC` for VAR in $VARS; do find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \; done Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-19Undo my ugly commit that added uses clauses in lots of places instead of one.Myles Watson
Fix configuration of all boards. (Abuild tested) Hopefully fix compilation of PPC boards (they've never compiled for me.) Apologize profusely. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4367 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-17Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial.Myles Watson
Abuild tested with -C. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4360 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-06When I started refactoring mainboard Config.lb, I added two differentCarl-Daniel Hailfinger
files for targets without failover: src/config/nofailovercalculation.lb (64 kB XIP) src/config/nofailovercalculation128.lb (128 kB XIP) Targets with other XIP sizes were ignored. This patch moves XIP size back into mainboard code. Benefits from this patch: - src/config/nofailovercalculation128.lb is no longer needed - Targets with XIP sizes besides 64k and 128k benefit from refactoring - Conceptually, this makes the include files pure calculation files without settings. Abuild tested. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4348 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-21Thanks to Myles' patch adding support for include statements,Carl-Daniel Hailfinger
refactoring Config.lb became possible. Factor out ROM size calculation from Config.lb. This patch converts 87 boards (with and without USE_FAILOVER_IMAGE), but it has to work around a parser bug. 89 files changed, 209 insertions(+), 2415 deletions(-) A total of 2206 removed lines. Abuild works for all changed boards on khepri. Myles writes: I've tested serengeti for the failover portion and s2892 for the nofailover portion. ldoptions are exactly the same and they both boot the same. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-14v2/src romfs->cbfs renamePeter Stuge
This also has the config tool changes in v2/util. Rename romfs.[ch]->cbfs.[ch] and sed romfs->cbfs romtool->cbfstool ROMFS->CBFS Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4113 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-13I need to do uses HAVE_ACPI_RESUME for each board. Here we go.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Rudolf Marek <r.marek@assembler.cz> It should fix the build break introduced in r4101 git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4105 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-01Drop CONFIG_CHIP_NAME. Those config statements in Config.lb shouldStefan Reinauer
be used unconditionally, and the names don't hurt. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4042 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-31Add the CONFIG_ROMS config variable. Ronald G. Minnich
Tested under abuild, causes no trouble. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4035 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-02-18Carl-Daniel's part:Carl-Daniel Hailfinger
This patch converts mainboard_$VENDOR_$BOARD_ops to mainboard_ops and mainboard_$VENDOR_$BOARD_config to mainboard_config. Ron's part: The config change that makes the naming change not break every build. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3954 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-16* Add a new board, the BCom WinNET P680Alex Mauer
* Add a function to change the 24/48Mhz clock input selector on the Winbond W83697 superio to 48Mhz, used by the WinNET P680 Signed-off-by: Alex Mauer <hawke@hawkesnest.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3661 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-04This changes the python generated makefilesCarl-Daniel Hailfinger
targets/*/*/Makefile targets/*/*/normal/Makefile targets/*/*/fallback/Makefile to use a common copy of romcc, and to leave this compiler untouched by 'make clean' in targets/*/*/fallback/ and targets/*/*/normal/ . 'make clean' in targets/*/*/ will clean romcc. Thanks to Mats for the initial idea and implementation of a tool to do this. This patch has almost the same behaviour as the original tool without having to run the tool each time. Tested for abuild-friendliness. The patch saves ~10-12 seconds for every target using romcc. For a full abuild run, this is ~20% time saved. For the first 38 abuild targets, total build time is down to 13m24s instead of 16m22s on my machine. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Mats Erik Andersson <mats.andersson@gisladisker.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3564 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-29Now coreboot performs IRQ routing for some boards.Nikolay Petukhov
You can see this by executing commands like this: grep -r pci_assign_irqs coreboot/src/* This basically AMD/LX based boards: pcengines/alix1c, digitallogic/msm800sev, artecgroup/dbe61, amd/norwich, amd/db800. Also for AMD/GX1 based boards need a patch [http://www.pengutronix.de/software/ptxdist/temporary-src/references/geode-5530.patch] for the right IRQ setup. AMD/GX1 based boards is: advantech/pcm-5820, asi/mb_5blmp, axus/tc320, bcom/winnet100, eaglelion/5bcm, iei/nova4899r, iei/juki-511p. I have two ideas. 1. Delete duplicate code from AMD/LX based boards. 2. Add IRQ routing for AMD/GX1 boards in coreboot. The pirq.patch for IRQ routing logically consist from of two parts: First part of pirq.patch independent from type chipsets and assign IRQ for ever PCI device. It part based on AMD/LX write_pirq_routing_table() function. Second part of pirq.patch depends of type chipset and set PIRQx lines in interrupt router. This part supports only CS5530/5536 interrupt routers. IRQ routing functionality is included through PIRQ_ROUTE in Config.lb. Tested on iei/juki-511p(cs5530a), iei/pcisa-lx(cs5536) and also on TeleVideo TC7020, see http://www.coreboot.org/pipermail/coreboot/2007-December/027973.html. Signed-off-by: Nikolay Petukhov <nikolay.petukhov@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3196 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18Rename almost all occurences of LinuxBIOS to coreboot. Stefan Reinauer
Due to the automatic nature of this update, I am self-acking. It worked in abuild. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3053 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18Please bear with me - another rename checkin. This qualifies as trivial, noStefan Reinauer
code is changed. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3052 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-24Some fixes for the BCOM WinNET100, mostly in Config.lb:Uwe Hermann
- Add missing entry for the NIC: device pci 0f.0 on end # Ethernet (onboard) - Drop the following lines: register "com1" = "{115200}" register "com2" = "{38400}" Those entries hardcode the BAUD rate (as far as I can tell, please correct me if I'm wrong). We don't want that -- instead the config option TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those lines will not break serial output (COM1, 115200, 8n1). - Enable IDE (PCI device 00:12.2) and add the following register lines to tell the CS5530 code to actually enable IDE channel 0: register "ide0_enable" = "1" register "ide1_enable" = "0" # Not available/needed on this board Tested with a 2.5" hard drive and FILO, works fine. - Enable USB (PCI device 00:13.0), not sure why it was commented. - Enable COM2 as it's used by the smartcard reader. - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix abuild for this board. - Add some more comments. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2896 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-09Minor cosmetic changes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2844 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-09Add support for the BCOM WinNET100 (used in the IGEL-316 thin client).Juergen Beisert
See http://www.linuxbios.org/BCOM_WINNET100_Build_Tutorial for hardware description and build tutorials. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2843 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1