summaryrefslogtreecommitdiff
path: root/src/mainboard/bcom
AgeCommit message (Collapse)Author
2008-10-16* Add a new board, the BCom WinNET P680Alex Mauer
* Add a function to change the 24/48Mhz clock input selector on the Winbond W83697 superio to 48Mhz, used by the WinNET P680 Signed-off-by: Alex Mauer <hawke@hawkesnest.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3661 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-04This changes the python generated makefilesCarl-Daniel Hailfinger
targets/*/*/Makefile targets/*/*/normal/Makefile targets/*/*/fallback/Makefile to use a common copy of romcc, and to leave this compiler untouched by 'make clean' in targets/*/*/fallback/ and targets/*/*/normal/ . 'make clean' in targets/*/*/ will clean romcc. Thanks to Mats for the initial idea and implementation of a tool to do this. This patch has almost the same behaviour as the original tool without having to run the tool each time. Tested for abuild-friendliness. The patch saves ~10-12 seconds for every target using romcc. For a full abuild run, this is ~20% time saved. For the first 38 abuild targets, total build time is down to 13m24s instead of 16m22s on my machine. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Mats Erik Andersson <mats.andersson@gisladisker.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3564 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-29Now coreboot performs IRQ routing for some boards.Nikolay Petukhov
You can see this by executing commands like this: grep -r pci_assign_irqs coreboot/src/* This basically AMD/LX based boards: pcengines/alix1c, digitallogic/msm800sev, artecgroup/dbe61, amd/norwich, amd/db800. Also for AMD/GX1 based boards need a patch [http://www.pengutronix.de/software/ptxdist/temporary-src/references/geode-5530.patch] for the right IRQ setup. AMD/GX1 based boards is: advantech/pcm-5820, asi/mb_5blmp, axus/tc320, bcom/winnet100, eaglelion/5bcm, iei/nova4899r, iei/juki-511p. I have two ideas. 1. Delete duplicate code from AMD/LX based boards. 2. Add IRQ routing for AMD/GX1 boards in coreboot. The pirq.patch for IRQ routing logically consist from of two parts: First part of pirq.patch independent from type chipsets and assign IRQ for ever PCI device. It part based on AMD/LX write_pirq_routing_table() function. Second part of pirq.patch depends of type chipset and set PIRQx lines in interrupt router. This part supports only CS5530/5536 interrupt routers. IRQ routing functionality is included through PIRQ_ROUTE in Config.lb. Tested on iei/juki-511p(cs5530a), iei/pcisa-lx(cs5536) and also on TeleVideo TC7020, see http://www.coreboot.org/pipermail/coreboot/2007-December/027973.html. Signed-off-by: Nikolay Petukhov <nikolay.petukhov@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3196 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18Rename almost all occurences of LinuxBIOS to coreboot. Stefan Reinauer
Due to the automatic nature of this update, I am self-acking. It worked in abuild. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3053 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18Please bear with me - another rename checkin. This qualifies as trivial, noStefan Reinauer
code is changed. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3052 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-24Some fixes for the BCOM WinNET100, mostly in Config.lb:Uwe Hermann
- Add missing entry for the NIC: device pci 0f.0 on end # Ethernet (onboard) - Drop the following lines: register "com1" = "{115200}" register "com2" = "{38400}" Those entries hardcode the BAUD rate (as far as I can tell, please correct me if I'm wrong). We don't want that -- instead the config option TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those lines will not break serial output (COM1, 115200, 8n1). - Enable IDE (PCI device 00:12.2) and add the following register lines to tell the CS5530 code to actually enable IDE channel 0: register "ide0_enable" = "1" register "ide1_enable" = "0" # Not available/needed on this board Tested with a 2.5" hard drive and FILO, works fine. - Enable USB (PCI device 00:13.0), not sure why it was commented. - Enable COM2 as it's used by the smartcard reader. - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix abuild for this board. - Add some more comments. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2896 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-09Minor cosmetic changes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2844 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-09Add support for the BCOM WinNET100 (used in the IGEL-316 thin client).Juergen Beisert
See http://www.linuxbios.org/BCOM_WINNET100_Build_Tutorial for hardware description and build tutorials. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2843 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1