coreboot - Some coreboot project code with my work

Age	Commit message (Collapse)	Author
2017-09-23	mb//: Remove rtc nvram configurable baud rate	Arthur Heymans
	There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-12	mb/foxconn/g41s-k: add new mainboard	Samuel Holland
	Based on the Intel G41 chipset, ICH7 southbridge, and IT8720F Super I/O. Tested, working: * Booting Linux 4.11.3 and Windows 8.1 from USB and HDD * Resume from S3 (Linux and Windows) * Native raminit (DDR2-800) * Native graphics init (SeaBIOS, Linux) * Graphics init with VGA BIOS (SeaBIOS, Windows) * PCI-E x16 PEG slot, PCI-E x1 slot from southbridge * Realtek ALC888 HD Audio (including front panel and jack detection) * Realtek R8168 Gigabit LAN * Both SATA ports * USB 1.1 and 2.0 devices (keyboard, mass storage) * PC speaker beep * COM header * Super I/O Environment controller (temps, voltage, fans) * PS/2 keyboard and mouse * Flashing with `flashrom -p internal` * 1MiB and 2MiB SPI flash chips * CMOS gfx_uma_size Appears, OS driver loads, but otherwise untested: * IrDA header * CIR header * TPM header Untested: * S/PDIF digital audio Tested, known broken: * CMOS power_on_after_fail * USB keyboard in secondary payloads Change-Id: Ifc4c8935b1a11e55f4bf6cfa484a8a8d09b1adda Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/20027 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>