summaryrefslogtreecommitdiff
path: root/src/mainboard/gigabyte
AgeCommit message (Collapse)Author
2010-11-21Convert boards to use mptable_write_buses.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6105 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Move MCP55_PCI_E_X_* to Kconfig. Any useless values in romstage.cs werePatrick Georgi
not brought over to Kconfig (this applies to all #defines to 4, as that's the default anyway) Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6104 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Use DIMM0 et al in lots more places instead of hardocding values.Uwe Hermann
The (0xa << 3) expression equals 0x50, i.e. DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6103 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Some more DIMM0 related cleanups and deduplication.Uwe Hermann
- VIA VT8235: Do the shift in smbus_read_byte() as all other chipsets do. - spd.h: Move RC00-RC63 #defines here, they were duplicated in lots of romstage.c files and lots of spd_addr.h files. Don't even bother for those spd_addr.h which aren't even actually used, drop them right away. - Replace various 0x50 hardcoded numbers with DIMM0, 0x51 with DIMM1, and 0xa0 with (DIMM0 << 1) where appropriate. - Various debug.c files: Replace SMBUS_MEM_DEVICE_START with DIMM0, SMBUS_MEM_DEVICE_END with DIMM7, and drop useless SMBUS_MEM_DEVICE_INC. - VIA VX800: Drop unused SMBUS_ADDR_CH* #defines. - VIA VT8623: Do the shift in smbus_read_byte() as all other chipsets do. Then, replace 0xa0 (which now becomes 0x50) with DIMM0. - alix1c/romstage.c, alix2d/romstage.c: Adapt to recent bit shift changes. - Various files: Drop DIMM_SPD_BASE and/or replace it with DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6100 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
addressing scheme to match the rest of the tree (0x50 instead of 0xa0). abuild tested. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18Eliminate SET_NB_CFG_54 option. There was no board thatPatrick Georgi
deselected it, and very likely there won't ever be any hardware that requires it deselected. Keep the "selected" code path around, leading to no functional change. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6086 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-17This problem was introduced withTobias Diedrich
http://tracker.coreboot.org/trac/coreboot/changeset/3953 Note that all corresponding DSDTs only ever check TOM2 against 0. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Move the SET_FIDVID* family of configuration options to Kconfig andPatrick Georgi
make their defaults more obvious. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6077 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14CK804/MCP55 devicetree.cb cosmetic and indentation fixes.Uwe Hermann
Add a few more comments for the entries, and also change the devicetree.cb files to the more compact and better readable variant with indentation level of 2 spaces (instead of random mix of tabs and spaces). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6071 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07DSDT.asl should not report the AMD SB600/SB700 RTC as Intel PIIX4Scott Duplichan
compatible. The extended cmos is accessed differently for AMD and Intel RTCs. Not sure what if any OS cares about this distinction, but non-Intel compatible seems like a safer way to report the AMD RTC. Tested with Win7 on Mahogany_fam10 and kino-780am2-fam10. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6046 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07Move K8_ALLOCATE_IO_RANGE to Kconfig.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6036 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07Fix a few incorrect GIGABYTE board names (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6033 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-06Remove comments that are obsolete since r6028.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6029 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.cPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6028 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05Various PIRQ/MPTABLE/ACPI Kconfig fixes.Uwe Hermann
- Use HAVE_ACPI_TABLES, HAVE_MP_TABLE, and HAVE_PIRQ_TABLE (instead of GENERATE_*) in the board's Kconfig file, as all other boards do. - Add missing HAVE_ACPI_TABLES/HAVE_MP_TABLE/HAVE_PIRQ_TABLE to boards which have the respective files. The only exception: EPIA-M700 doesn't select ACPI, as it doesn't have dsdt.asl. Added a comment that the user is supposed to run the 'get_dsdt' script and edit Kconfig afterwards. - Fix minor warning/error in src/mainboard/msi/ms9652_fam10/acpi_tables.c, now that the file is actually used. - msi/ms9652_fam10: use #include instead of Include() as we usually do now. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6027 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-31Remove definitions of ACPI_SSDTX_NUM to 0, that's the default anyway.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6007 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-26We need to call smp_write_lintsrc() instead of smp_write_intsrc() forTobias Diedrich
local ints. This is wrong in most coreboot mptables, probably all generated by util/mptable/mptable.c. After fixing this now XP can boot in MPS mode on my M2V. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5992 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-25Factor out common mptable code to mptable_init().Uwe Hermann
- Drop sig[], oem[], and productid[] fields in all mptable.c files, no longer needed. The sig[] is always the same ("PCMP"), the oem[] is currently also always the same ("COREBOOT"), and productid is being passed into mptable_init() directly as string now. - LAPIC_ADDR is passed in as parameter, too. While at the moment it's always the same value that is passed in, the LAPIC base address could also be relocated theoretically, so keep it as parameter for now. - Fix a few productid entries, they were (partially) incorrect: - DK8S2 (was "DK8X", copypaste) - 939A785GMH (was "MAHOGANY", copypaste) - X6DHE-G (was "X6DHE", incomplete board name) - H8DME-2 (was "H8DMR", copypaste) - H8QME-2+ (was "H8QME", incomplete board name) - X6DHE-G2 (was "X6DHE", incomplete board name) - X6DHR-iG2 (was "X6DHR-iG", incomplete board name) - GA-M57SLI-S4 (was "M57SLI", incomplete board name) - KINO-780AM2 (was "KINO", incomplete board name) - DL145 G1 (was "DL145G1", small fix as per vendor website) - DL145 G3 (was "TREX", wrong board name) - DL165 G6 (was "HP DL165 G6", drop vendor) - S2912 (was "S2895", copypaste) - VT8454c (was "VIA VT8454C", drop vendor, lower-case "c") - EPIA-N (was "P4DPE", copypaste) - pc2500e (was "PC2500", incorrect name) - S1850 (was "S2850", copy-paste) - MS-7135 (was "MS7135") - MS-9282 (was "MS9282") - MS-9185 (was "MS9185") - MS-9652 (was "K9ND MS-9652") - Ultra 40 (was "ultra40") - E326 (was "E325", copypaste) - M4A785-M (was "TILAPIA", copypaste) - P2B-D (was "ASUS P2B-D", drop vendor) - P2B-DS (was "ASUS P2B-DS", drop vendor) - Adapt the mptable utility to use mptable_init() too. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-24Running a checked build of Windows is needed for understanding its various ↵Scott Duplichan
BIOS related BSODs. Win7 checked build complains when running coreboot+seabios: FADT revision inconsistent with length. Revision: 0x1 Length: 0xf4 Expected Length: 0x74 Change the FADT revision from 1 to 3 to match its length and prevent the Windows checked build assert. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5985 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-12We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.Uwe Hermann
As both ioapic.h and acpi.h define a macro named "NMI", rename one of them (NMI -> NMIType in acpi.h). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-09Remove various .c #includes from Intel 440BX/82371EB boards.Uwe Hermann
- Use 'romstage-y' to turn i82371eb_early_pm.c and i82371eb_early_smbus.c into distinct compilation units, and don't #include the files anymore in romstage.c files. - Ditto for lib/debug.c, northbridge/intel/i440bx/raminit.c, and northbridge/intel/i440bx/debug.c. - Add various header files which are now needed. - Make functions that need to be visible non-static. - Drop a remaining "select ROMCC" from a 4440BX board. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Idwer Vollering <vidwer@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5929 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-07Remove duplicate line from pci_ids.h.Jonathan Kollasch
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Jonathan Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5920 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-07Convert all Intel 82371AB/EB/MB based boards to TINY_BOOTBLOCK.Uwe Hermann
Also: Unfortunately Intel 440BX + 82371AB/EB/MB boards can have their ISA device on various PCI bus:device.function locations. Examples we encountered: 00:07.0, 00:04.0, or 00:14.0. Thus, instead of hardcoding PCI bus:device.function numbers such as PCI_DEV(0, 7, 0), we now simply find the ISA device via PCI IDs, which works the same on all boards. As an additional benefit this patch also gets rid of one .c file include in romstage.c. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5918 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-06Convert all Intel 440BX boards to Cache-as-RAM (CAR).Uwe Hermann
- Add "select CACHE_AS_RAM" in src/cpu/intel/slot_1/Kconfig. - Add the following in src/cpu/intel/slot_1/Makefile.inc: cpu_incs += $(src)/cpu/intel/car/cache_as_ram.inc - Remove "select ROMCC" from all 440BX board Kconfig files. - Drop all early_mtrr_init() calls, that's done by CAR code now. Various small fixes were needed to make it build: - Drop do_smbus_recv_byte(), do_smbus_send_byte(), do_smbus_write_byte(), those were never called anyways. - Remove the "static" from the main() functions in romstage.c files. - Always call dump_spd_registers() from the 440BX debug.c, but use "#if CONFIG_DEBUG_RAM_SETUP" to only have that code if RAM debugging is enabled in menuconfig. - Drop all "lib/ramtest.c" #includes and ram_check() calls (even if commented out) from romstage.c's, as we've done for most other boards. - Add missing #includes or prototypes. Some of the prototypes will be removed later when we get rid of the #include'd .c files. Abuild-tested for all boards, and boot-tested on A-Trend ATC-6220. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5917 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05attached patch moves a couple more config flags out of romstage:Patrick Georgi
CK804_USE_NIC, CK804_USE_ACI, CK804_NUM. MCP55_USE_NIC, MCP55_USE_ACI, MCP55_NUM. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Pter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5912 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05- move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1Patrick Georgi
- move EHCI_BAR and EHCI_DEBUG_OFFSET to Kconfig to be set by USB debug port enabled southbridges - drop USB debug code includes from romstage.cs and use romstage-srcs in the build system instead Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5911 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05Remove lib/ramtest.c-include from all CAR boards.Patrick Georgi
Remove many more .c-includes from i945 based boards. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5910 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-02Allow selecting the physical USB Debug Port on AMD SB700.Uwe Hermann
The AMD SB700 allows changing the physical USB port to be used as USB Debug Port, implement support for this. Also, fix incorrect PCI device of the SB700 EHCI device. Actually, the SB700 has _two_ EHCI devices (D18:F2 and D19:F2), but for now we only use D18:F2. Our generic USBDEBUG code cannot handle multiple EHCI PCI devices currently, AFAICS. Hook up all SB700 boards to the CONFIG_USBDEBUG_DEFAULT_PORT facility. Untested, but should work. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5907 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-01Move CACHE_AS_RAM_ADDRESS_DEBUG out of romstage.c into Kconfig,Patrick Georgi
rename it slightly, make it visible only on relevant northbridges, drop it entirely from via boards (as they seem to have picked it up from AMD code without using it themselves), and make it default to false for all boards. Some romstages used to set this to "true" (ie. "print debug output"), but I didn't follow up on it in Kconfig - if you need it to debug CAR, enable it yourself. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5898 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-30Rename build system variables to be more intuitive, andPatrick Georgi
at the same time let the user specify sources instead of object files: - objs becomes ramstage-srcs - initobjs becomes romstage-srcs - driver becomes driver-srcs - smmobj becomes smm-srcs The user servicable parts are named accordingly: ramstage-y, romstage-y, driver-y, smm-y Also, the object file names are properly renamed now, using .ramstage.o, .romstage.o, .driver.o, .smm.o suffixes consistently. Remove stubbed out via/epia-m700 dsdt/ssdt files - they didn't easily fit in the build system and aren't useful anyway. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coreystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-28Remove redundant HW_MEM_HOLE_SIZEK and HW_MEM_HOLE_SIZE_AUTO_INC settings.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5875 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-27Add a kconfig option to allow the user to select a specific physicalUwe Hermann
USB port for use as Debug Port (on chipsets which support that). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5860 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-25Drop some useless "../../../" in #includes (trivial).Uwe Hermann
Build-tested using abuild. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5844 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-24Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.Uwe Hermann
Without a (currently) dummy set_debug_port() function the build fails, this may or may not be fixed differently in the future. Manually build-tested on all SB600/SB700 boards, and tested on hardware on one SB600 board I own, works fine. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5833 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-21Cut the crap.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5823 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-10Move memory type information out of some AMD sockets.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5800 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-07Remove unused ide0_enable and sata0_enable entries from SB7xx Rudolf Marek
and SB600. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5781 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5756 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
Kconfigs from within the choice/endchoice block. This makes it possible to define user visible board specific options. Moved all vendor names and PCI ids to the vendors' Kconfigs. Now all options in each file depend on the same symbol, so replaced all "depends on"s with a single "if". Sorted boards (sort -d), cleaned whitespace. This patch also introduces a dummy option BOARD_SPECIFIC_OPTIONS, which is always "y" and never used. It it simply needed to have something to attach the boards' "select" statements to. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5754 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-26Remove unused mainboard_config definitions. Trivial.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5744 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-17Another AMD 780/700 mainboard: Gigabyte MA78GM-US2HWang Qing Pei
http://www.gigabyte.cn/products/product-page.aspx?pid=3118#ov the simple config is AM2+DDR2+SB700+RS780, the superIO is IT8718F The patch has been tested with SeaBIOS + SUSE11.2 Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5715 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-17Add support for Gigabyte MA785GMT mainboard.Wang Qing Pei
Details of the hardware configuration can be found at http://www.gigabyte.com/products/product-page.aspx?pid=3478 Brief configuration is: 1. CPU:Support for AM3 processors: AMD PhenomTM II processor/ AMD Athlon™ II processor 2. North Bridge: AMD 785G 3. South Bridge: AMD SB710 4: Super IO : ITE8718F The mainboard has two bios flashchip. Coreboot ROM should be flashed into the M_BIOS (which means main bios). Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5713 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-14My old mcp55 azalia fix from May 2010. Was never checked in.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5695 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
board porter: printk should always be available in CAR mode. Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board but it's not been used there. Very odd. There is one usage of CONFIG_USE_INIT which was always off in src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with those few lines. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-26Make include paths more consistent. Fixes compilation errors for me.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5668 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-08Fix all warnings in the tree Stefan Reinauer
(does not fix the cmos.layout race yet) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5660 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5653 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25also rename the config option.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5588 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25fix most usbdebug warnings and fix function names.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5587 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25Long ago we agreed on kicking the _direct appendix because everything inStefan Reinauer
coreboot is direct. This patch does it. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5586 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 07:54:51 +0000