summaryrefslogtreecommitdiff
path: root/src/mainboard/gigabyte
AgeCommit message (Collapse)Author
2017-04-07nb/intel/i945: Move INTEL_EDIDPatrick Rudolph
All boards select INTEL_EDID, move it to nb folder. Change-Id: I35f075a87f2d841856b208f9440cf41af6a3c8e6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19086 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-21southbridge/nvidia/mcp55: Get rid of #include early_smbus.cArthur Heymans
Using linker instead of '#include *.c'. Change-Id: I74dfa99c8bb3f4ca7ef3d774be2197897022f52c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18484 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-02-17nb/intel/x4x: Implement resume from S3 suspendArthur Heymans
It rewrites the results of receive enable stored in the upper nvram region, to avoid running receive enable again. Some debug info is also printed about the self-refresh registers. (Not enforcing a reset here, since 0 does not necessarily mean it's not in self-refresh). Change-Id: Ib54bc5c7b0fed6d975ffc31f037b5179d9e5600b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17998 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-17nb/intel/x4x: Fix raminit on reset pathArthur Heymans
Previously the raminit failed on hot reset and to work around this issue it unconditionally did a cold reset. This has the following issues: * it's slow; * when the OS issues a hot reset some disk drives expect their 5V power supply to remain on, which gets cut off by a cold reset, causing data corruption. To fix this some steps in raminit must be ommited on the reset path. This includes receive enable calibration. To achieve this it stores receive enable results in RTC nvram for them to be rewritten on the resume path. Note: The same thing needs to be done on the S3 resume path. Calling a hot reset after raminit "outb(0x6, 0cf9)" works. Change-Id: I6601dd90aebd071a0de7cec070487b0f9845bc30 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18009 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-06sb/ich7: Use common/gpio.h to set up GPIOsArthur Heymans
This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-05mb/ga-m57sli-s4: Fix early uart outputArthur Heymans
The console output is garbled until it is fixed in ramstage by devicetree which sets the uart clock predivider correctly. Change-Id: I6d6ec0febfec98a8d4a71e1476036c804cf5f08d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17969 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-01-04amdfam10: Perform major include ".c" cleanupDamien Zammit
Previously, all romstages for this northbridge family would compile via 1 single C file with everything included into the romstage.c file (!) This patch separates the build into separate .o modules and links them accordingly. Currently compiles and links all fam10 roms without breaking other roms. Both DDR2 and DDR3 have been completed TESTED on REACTS: passes all boot tests for 2 boards ASUS KGPE-D16 ASUS KFSN4-DRE Some extra changes were required to make it compile otherwise there were unused functions in included "c" files. This is because I needed to exchange CIMX for the native southbridge routines. See in particular: advansus/a785e-i asus/m5a88-v avalue/eax-785e A followup patch may be required to fix the above boards. See FIXME, XXX tags Change-Id: Id0f9849578fd0f8b1eab83aed910902c27354426 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/17625 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
2017-01-04intel/i945 boards: Add romstage time stampsPaul Menzel
Currently, some Intel 945 boards miss some or all of the time stamps *1:start of rom stage*, *2:before ram initialization*, and *3:after ram initialization*, so add them. Use the same formatting as used for the board Lenovo X60, which already has code for all the time stamps. Change-Id: Ie25747d02fadd74b7d7b7cab234a7a88b2cc0c42 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17993 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-01-03mb/ga-m57sli: Add cmos.defaultArthur Heymans
If the cmos checksum is incorrect it should fall back to sane defaults. Change-Id: If16cfc73effd4a825d0cefcd30bfd0e48b2d9132 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17968 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-26amd-based mainboards: Fix whitespace in _PTS commentsMarshall Dawson
Correct tabs that were intended as spaces. Change-Id: Idcf33d829f87a866b5ed880527102918d5b93842 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17905 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-12-15mb/ga-945gcm-s2l: Fix resume from suspendArthur Heymans
Checking for memory self refresh can generate false positives, as explained in faa6beb: "northbridge/intel/i945: CHECK_SLFRCS_ON_RESUME Kconfig option". This seems to be the case for this motherboard. TESTED on ga-945gcm-s2l. Change-Id: Iadf0a73b054470b652e1dc02557fb1715131f823 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17617 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-11nb/intel/i945: Make pci_mmio_size a devicetree parameterArthur Heymans
Instead of hardcoding pci_mmio_size in the raminit code, this makes it a parameter in the devicetree. A safe minimum of 768M is also defined since using anything less causes problems (if 4G of ram is used). Change-Id: If004c861464162d5dbbc61836a3a205d1619dfd5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16856 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-06cpu/amd/mtrr.h: Drop excessive includesKyösti Mälkki
Change-Id: Id404bdab1f2361f1e7d20f7ee72111971863dddf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17736 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06cpu/x86/msr.h: Drop excessive includesKyösti Mälkki
Change-Id: Ic22beaa47476d8c600e4081fc5ad7bc171e0f903 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17735 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06cpu/cpu.h: Drop excessive includesKyösti Mälkki
Change-Id: Ifeef04b68760522ce7f230a51f5df354e6da6607 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17734 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. Change-Id: I943e354af0403e61263f1c780f02c7b463b3fe11 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17529 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30mb/gigabyte/ga-945gcm-s2c: Add mainboard using variantsArthur Heymans
This mainboard is identical to ga-945gcm-s2l except for NIC which is a Realtek RTL 8101E chip (10/100 Mbit). The schematics of ga-945gcm-s2l mention multiple NICs and ga-945gcm-s2c and ga-945gcm-s2l have a common manual further indicating that those boards are close to identical. Change-Id: Iba3d401efcf208154e639c3237b201830a5151aa Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17416 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28mb/gigabyte/ga-945gcm-s2l: Configure SuperIO ECArthur Heymans
Change-Id: Id7c2b656f500c14f39d4492667ea461b9ca353b0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17613 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28mb/gigabyte/ga-g41m-es2l: Tie in configuration for SuperIO ECDamien Zammit
Change-Id: Ifba821a7e355a0d6689f21c7f307e3901903a3fd Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17602 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-24mb/ga-945gcm-s2l: Enable EC I/O decode range.Arthur Heymans
Change-Id: I021aae6130c475cb370b891ffaec6f1ad267540b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17580 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-22mb/gigabyte/ga-g41m-es2l: Add MAX_CPU = 4 in KconfigArthur Heymans
This motherboard support Intel core 2 quads. Before this change SeaBIOS was not usable, due to it crashing before it got to load anything. Change-Id: Ifdaaceace04f9ba0753aab2d3b05c0519367f91f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17537 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-21mb/ga-g41m-es2l: Correctly configure PCI IRQ in ACPIArthur Heymans
Obtained from vendor bios DSDT, under "Device (HUB0), Name (_ADR, 0x001E0000)". The schematics also indicate that the INTA-D are hardwired to these PIRQ lines. Change-Id: I8e1c6cb986a2b345a5e1fddd454c7fb12fb8256a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17099 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-20intel sandy/ivy: Improve DIMM replacement detectionKyösti Mälkki
When MRC cache is available, first read only the SPD unique identifier bytes required to detect possible DIMM replacement. As this is 11 vs 256 bytes with slow SMBus operations, we save about 70ms for every installed DIMM on normal boot path. In the DIMM replacement case this adds some 10ms per installed DIMM as some SPD gets read twice, but we are on slow RAM training boot path anyways. Change-Id: I294a56e7b7562c3dea322c644b21a15abb033870 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17491 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-11-16mb/ga-945gcm-s2l: Clean up SuperioArthur Heymans
GPIO register at offset 0xfc (VID Input Register) is read-only but writing 1 to bit 0 will update initial VID input. Change-Id: Ie372e98f8e497eede382975262a63d58c16227b9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17412 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-08mb/gigabyte/ga-945gcm-s2l: add mainboardArthur Heymans
Startpoint was Intel d945gclf, which has same chipset and Gigabyte ga-g41m-es2l which has same Superio. What works and is tested: * PCI slot; * PCIe x16 slot with GPU (RADEON HD 2600 XT) and ADD2 DVI card; * onboard VGA output (only textmode implemented) with native graphic init; * 533, 800, 1067MHz FSB CPU (1333MHz is unsupported by the chipset); * serial output during and after boot. What does not work: * resume from suspend (does not work for d945gclf either). Quirks: * The Realtek ethernet card requires a reset which currently also hardcodes a MAC adress. This board was only tested with the SeaBIOS payload due to flash size constraints (512KB) and with GNU/Linux. Change-Id: I0ff9f193105facc1b276a791790e27eb4c275085 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17033 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-25mb/ga-g41m-es2l: remove unneeded IGD IRQ setting in ACPIArthur Heymans
According to: "Intel ® 4 Series Chipset Family datasheet" the IGD only has 1 IRQ pin. Change-Id: I974f002f5a213056f4593a1eab10772527bb241d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17098 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-10gigabyte/ga-g41m-es2l: add VESA mode to KconfigArthur Heymans
This patch adds MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG to the gigabyte/ga-g41m-es2l Kconfig to allow selecting between textmode and vesamode in menuconfig. Change-Id: I84b61118fa0419d49d2498b66029711cdce97576 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16501 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-01mainboard/*/*/*/usb.asl: Use tabs for indentsElyes HAOUAS
Change-Id: Id46a0c4ca59dc7224c2eedd674ea3a5486509de1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16824 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-01mainboard/gigabyte/m57sli/romstage.c: Use tabs for indentsElyes HAOUAS
Change-Id: Ib439e5d96543790d17934bd477af62d39a5958b6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16815 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-01mainboard/gigabyte/ga-b75m-d3v: Use tabs for indentsElyes HAOUAS
Change-Id: I36011719f79da4a9ab2aaeb92ffb0506b4373143 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16816 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-01mainboard/gigabyte/ga-b75m-d3h: Use tabs for indentsElyes HAOUAS
Change-Id: I038e5cea654d1760ddb2c403c651d8f75e021251 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16819 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-29mainboard/gigabyte/ga_2761gxdk: Use tabs for indentsElyes HAOUAS
Change-Id: Ie752fe0a74acd4b79711596e56fc5ebf83884a0d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16779 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-26mainboard/*/*/dsdt.asl: Use tabs for indentsElyes HAOUAS
Change-Id: Idef587d8261784e916e8d50f4336cbcfca39b9b0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16730 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-26mainboard/*/*/mptable.c: Improve code formattingElyes HAOUAS
Change-Id: I341293cd334d6d465636db7e81400230d61bc693 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16723 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-26mainboard/*/*/irq_tables.c: Use tabs for indentsElyes HAOUAS
Change-Id: Idc29373cb01f4304d22ae315812bd40f0aaa94c9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16729 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20src/mainboard/getac - kontron: Add space around operatorsElyes HAOUAS
Change-Id: If3cdfdff60c92e3427f1b285e2bca92e2bb2a1cb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16640 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-13mainboard/gigabyte/*: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/gigabyte/*. Change-Id: Ied62d6234a4f6ea5f851e98a098b2c8f4e3db144 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-09mb/gigabyte/ga-g41m-es2l: Remove PCI disable on PEG bridgeDamien Zammit
Although the goal was to hide the ME device by disabling the PCI bridge, the original comment that this bridge was ME related was a mistake, this bridge is for PEG not for ME. We still need this PCI bridge "on" to enable pci express graphics add-on cards. Change-Id: Ibf322136097d77a8e7c05dcb14f72da938187a0a Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/16496 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-07mb/gigabyte/ga-g41m-es2l: Add IRQs for PCI express graphics in ACPIDamien Zammit
With this patch and the previous ones in this set, PCI express graphics is now working. 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller]) Change-Id: Ife691fb381e90e7744fe2ac4e20977be53419a14 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/16497 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-02Fix newlines at the end of filesMartin Roth
All but ga-g41m-es2l/cmos.default had multiple final newlines. ga-g41m-es2l/cmos.default had no final newline. Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16361 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io>
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector code) the reboot counter stored in `reboot_bits` isn't reset on a reboot with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR enabled, later stages (e.g. payload, OS) have to clear the counter too, when they want to switch to normal boot. So change the bits to (h)ex instead of (r)eserved. To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also remove all occurences of the obsolete `last_boot` bit that have sneaked in again since 24391321 (mainboard: Remove last_boot NVRAM option). Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16157 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-15mb/gigabyte/ga-b75m-d3v: Add missing board URLJonathan Neuschäfer
Change-Id: I990038c09f5805c8e670fd316808dde767e8671b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16159 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-14src/mainboard: Capitalize ROM, RAM, CPU and APICElyes HAOUAS
Change-Id: Ia1f24d328a065a54975adde067df36c5751bff2d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15987 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-09gigbyte/ga-g41m-es2l: add cmos.layout and cmos.defaultArthur Heymans
This adds a cmos.layout and a cmos.default to ga-g41m-es2l. This allows to set things like baud_rate, debug_level, etc. from cmos. Change-Id: I25df7a1f3a0ce486b96cfe05bda628f604b0baec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15493 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-31gigabyte/ga_2761gxdk: Remove comment *endif*Paul Menzel
After the indentation is fixed in commit *mainboard: Format irq_tables.c* [1], the comment is redundant. So remove it. [1] Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a Change-Id: Iebbcf10ee3cef1b4cf60ea34a6b3ad51e2208671 Reviewed-on: https://review.coreboot.org/15933 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31mainboard: Format irq_tables.cPaul Menzel
Run the command below to format the files `irq_tables.c` of (mostly AMD) mainboards correctly with GNU indent 2.2.10. ``` $ git grep -l 'if (sum != pirq->checksum) {' | xargs indent -l ``` Fix up the following two checkpatch.pl errors manually. ``` ERROR: that open brace { should be on the previous line #1219: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:129: + uint8_t reg[8] = + { 0x41, 0x42, 0x43, 0x44, 0x60, 0x61, 0x62, 0x63 }; ERROR: that open brace { should be on the previous line #1221: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:131: + uint8_t irq[8] = + { 0x0A, 0X0B, 0X0, 0X0a, 0X0B, 0X05, 0X0, 0X07 }; ``` This is needed, so that follow-up commits, fixing checkpatch.pl errors and warnings, won’t run into conflicts with the git commit hooks, when for example, spaces instead of tabs are used for indentation. Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/15932 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-21intel/car/cache_as_ram_ht.inc: Prepare for dynamic CONFIG_RAMTOPKyösti Mälkki
Change-Id: Idb0f621553e76e771a5d6f2d492675ccd989d947 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15228 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-21intel/car/cache_as_ram.inc: Prepare for dynamic CONFIG_RAMTOPKyösti Mälkki
Change-Id: I02881ce465cb3835a6fa7c06b718aa42d0d327ec Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15227 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-12nb/intel/raminit (native): Read PCI mmio size from devicetreePatrick Rudolph
Instead of hardcoding the PCI mmio size read it from devicetree. Set a default value of 2048 MiB and 1024MiB for laptops without discrete graphics. Tested on Sandybridge Lenovo T520. Change-Id: I791ebd6897c5ba4e2e18bd307d320568b1378a13 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/15140 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31mb/gigabyte/ga-g41m-es2l: Update board_info.txt and add item to KconfigDamien Zammit
This adds the website URL to the board info and also enables the realtek nic reset function as per a previous patch. Change-Id: I2cda120c59b55f0dd2ffa78d397b16beb13d6843 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14954 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-12 21:11:00 +0000