summaryrefslogtreecommitdiff
path: root/src/mainboard/google/dedede/variants
AgeCommit message (Collapse)Author
2020-07-23mb/google/dedede/var/waddledoo: Configure stop delay for SiS TSKarthikeyan Ramasubramanian
Reset the Touchscreen (TS) and disable the stop GPIO (report switch) at the same time. Add a delay of 100 ms after disabling the stop GPIO. This will ensure the required delay is inserted for both reset and stop disable GPIOs simultaneously. BUG=b:152936541 TEST=Build and boot the waddledoo mainboard. Ensure that the SiS Touchscreen is functional. Change-Id: Icbfb5e07a28ab72b1ff696ad1183a6c2173dcaac Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43453 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23mb/google/dedede/var/drawcia: Generate SPD ID for supported partsKarthikeyan Ramasubramanian
Add supported memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: H9HCNNNBKMMLXR-NEE K4U6E3S4AA-MGCR BUG=None TEST=Build the drawcia board. Change-Id: Id05c0b2a87b64bfedc761949cbc8ad6cf7dd73a5 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43505 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23mb/google/dedede: Skip the CPU replacement check for dededeV Sowmya
This patches enables the SkipCpuReplacementCheck config for the dedede baseboard to avoid the forced MRC training for all its variants with the soldered down SOC. BUG=b:160201335 TEST=Build and verify CSE Lite SKU on Waddledoo. Cq-Depend: chrome-internal:3142530 Change-Id: I611e66f74a3b9b090ab5e0d836231643d3f919dc Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-07-21mb/google/dedede: Create madoo variantIan Feng
Create the madoo variant of the waddledoo reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:161191394 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_MADOO Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I6d3f611606f86036d67be9c8b0fda833ab61ecc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-20mb/google/dedede: Update link frequency and end point structure for OV9734Pandya, Varshit B
1. Update Link frequency to 180 Mhz 2. Set data-lanes to 1 and 3. Update the clock-lane used by sensor BUG=b:155285666 BRANCH=None TEST=Build and able to capture image using user facing camera. Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: I164cb6af1003de561be8ce640e7653b7bcb3a22f Reviewed-on: https://review.coreboot.org/c/coreboot/+/42679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-07-18mb/google/dedede: Convert static DPTF ASL into devicetree entriesTim Wawrzynczak
Since there is now a mechanism to generate DPTF ACPI tables and methods at runtime, dedede should switch to using that instead of raw ASL files. This patch converts the existing .asl files into devicetree entries. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6bb6e6e15f50a1e510080e16bbca09dfc5f16b1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43422 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15mb/google/dedede: Enable SIS touchscreen for WaddledeeKarthikeyan Ramasubramanian
Add SiS9813 USI touchscreen support. BUG=b:160129126 TEST="emerge-dedede coreboot chromeos-bootimage", build successful. Change-Id: I42fdc5e8243d2c70c953b2f516c10f84a041c035 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43304 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/google/dedede: Add ability to provide override GPIO tableKarthikeyan Ramasubramanian
For variants with slightly different GPIO configuration, add support to pass an override GPIO configuration table. BUG=None TEST=Build and boot the waddledee mainboard. Change-Id: I2f1c6dc2ea5499bff96a471c4461339ef01ee19a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-12mb/google/dedede/var/drawcia: support internal usb cameraWisley Chen
BUG=b:160741778 TEST=build drawcia, and check camera can be regconized Change-Id: I67bee9773b53451653abd76088d1d4062fe3da8f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42929 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/google/dedede/var/drawcia:Add audio support (ALC5682 codec, MX98360A spk amp)Wisley Chen
Select the drivers for ALC5682 codec and MX98360A spk amp BUG=b:158202026 TEST=FW_NAME=drawcia emerge-dedede coreboot chromeos-bootimage Change-Id: If271f11f10a85ade6f61ff8c25bfafeb67a69af6 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-08mb/google/waddledee: Enable AudioMaulik V Vaghela
1. Enable HDA Pci device in devicetree 2. Enable I2C4 in devicetree and fill ACPI information 3. Pass correct IRQ GPIO for headset jack BUG=None BRANCH=None TEST=Audio playback and recording works on Waddledee. Change-Id: I77aaa27bb29460ef834c3dd090ced868f2e99616 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Yong Zhi <yong.zhi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41765 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08mb/google/dedede/var/drawcia: add elan touchscreenWisley Chen
BUG=b:155002684 TEST=build drawcia, and check touchscreen can work Change-Id: Ib6a190d2f6fc5132af0e58c6df9919381e88f699 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-08mb/google/dedede/var/drawcia: Support Elan touchpadWisley Chen
BUG=b:155002811 TEST=build drawcia, and check touchpad can work. Change-Id: I674236aa6937a0444a85e6b8e2fb9a7925b56f5c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42922 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01mb/google/dedede: set tcc_offset value to 10Sumeet R Pawnikar
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit (TCC) activation feature. BUG=None BRANCH=None TEST=Built for dedede platform and verified the MSR value Change-Id: I53d1bd413c64643cf8bdaef266bde25a2f3a97ee Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42906 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24jasperlake: enable DPTF functionality for dededeSumeet R Pawnikar
Enable DPTF functionality on jasperlake based dedede platform BRANCH=None BUG=None TEST=Built for dedede system Change-Id: I17b6e4e96abee6181b0d1f94c356a32aa82c19b9 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41668 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/dedede: Re-configure the USB ACPI objectsKarthikeyan Ramasubramanian
In waddledee and waddledoo, discrete & integrated BT signals are routed to different USB ports. In all the other variant boards, discrete & integrated BT signals are routed to the same USB port (port 8 - index 7). Re-configure the USB devices accordingly. Also device configuration in override tree are applied only if there is a matching device in base devicetree. So configure all the USB devices in base devicetree and turn them off. BUG=b:154064148 TEST=Ensure that the SSDT contains the ACPI objects for enabled USB devices. Change-Id: I1b8bf7f4db1d2661f310bf4874428a6d1de222c6 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42554 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/google/dedede: Add VCM and NVM entry for OV8856 sensorPandya, Varshit B
Add DW9768 VCM device and add its entry in the OV8856's _DSD to allow the V4L2 driver to use the VCM functionality. Also add ACPI entries for AT24 NVM device, this will enumerated as a generic NVM device and not part of the V4L2 framework. BUG=b:155285666 BRANCH=None TEST=Build and able to see DW9768 and AT24 getting listed I2C3 lanes and able to capture image using world facing camera. Change-Id: I19e4a4107c5bc9d96f718d654df50e2705b98c03 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-12mb/google/dedede: Add new variant botenPeichao Wang
Add initial support for boten variant board. BUG=b:158023819 BRANCH=None TEST=build Change-Id: I56fe901c6aec781fac217ab08f7583cc25788688 Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-06-11mb/google/dedede: Add new variant drawciaWisley Chen
Add initial support for drawcia BUG=b:158540280 BRANCH=None TEST=build Change-Id: Ic775bb2a93581e422379ca90127e3581bbf3c89e Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-06-10mb/google/dedede/variants/waddledoo: Adjust I2Cs CLK to meet specJohn Su
After adjustment on waddledoo Touch Pad CLK: 392.9 KHz Touch Screen CLK: 387.4 KHz Audio CLK: 350.9 KHz BUG=b:151302522 BRANCH=master TEST=emerge-dedede coreboot chromeos-bootimage measure by scope with waddledoo. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Iec02a751f1effdbefbb2969db2fd57f27ecdd033 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42187 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-10mb/google/dedede: Enable S0ix supportAamir Bohra
Change-Id: I4cadfe69e36f959b54e374800c32629a7481ea94 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-08mb/google/dedede: Default spk_en gpio to lowUsha P
The max98357a_platform_driver will turn on/off the speaker enable gpio based on use, so configure it low to save power. BUG=None TEST=Built dedede and tested speaker playback working. We are seeing a power saving of ~10mW. Change-Id: I070679457b06cb82633c1197b893a5d89c8b2cf0 Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-06-08mb/google/dedede: source soc_common_config from variants overridetreeMaulik V Vaghela
All variants are overriding soc_common_config, so source it from overridetree and remove entry from baseboard devicetree. Only keeping chipset lockdown config in baseboard which will be common across all the variants. BUG=None BRANCH=None TEST=Checked code compilation and lockdown config is applied to all variants Change-Id: I23714b721a6bb0bac785f046586790a98dc5b646 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-06-07soc/intel/jasperlake: Add JSL PMC as 'hidden' PCI deviceTim Wawrzynczak
This change allows treating the PMC as a 'hidden' PCI device on Jasper Lake, so that the MMIO & I/O resources can be exposed as belonging to this device, instead of the system agent and LPC/eSPI. Change-Id: Ie07987c68388d03359c43f64a849dc6e3f94676e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-06mb/google/dedede/var/wheelie: Add memory parts and generate DRAM IDsFurquan Shaikh
This change adds memory parts used by variant wheelie to mem_list_variant.txt and generates DRAM IDs allocated to these parts. BUG=b:157862308 Change-Id: I53f6f5c832cd40068a6d4379ace849f6e8ad7a91 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41990 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/dedede: Switch to using auto-generated SPDsFurquan Shaikh
This change switches dedede and family to using auto-generated SPDs obtained using gen_spd.go and gen_part_id.go. Change-Id: I6fadae0abcfb6e50d3cc502098ace9b668667a51 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41881 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/dedede/var/waddledoo: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by waddledoo and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all dedede variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: MT53E512M32D2NP-046 WT:E Byte# Current New Explanation 4 0x15 0x16 This part has only 1 die. Hence, density per die is 16Gb. 6 0x90 0x04 1 die in package and 2 channels per die. 9 0x40 0x00 Unused by MRC. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xFF as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. Additionally, manufacturer name bytes are set to 0. Part: NT6AP256T32AV-J2 Waddledoo started assigning DRAM part IDs from 1. So, this change fills in Nanya part as ID 0 (though it is currently unused). Change-Id: I3879c4f3ad942eb349b52aad397333f576599bbd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06mb/google/dedede/var/wheelie: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by wheelie and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all dedede variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: MT53E512M32D2NP-046 WT:E Byte# Current New Explanation 4 0x15 0x16 This part has only 1 die. Hence, density per die is 16Gb. 6 0x90 0x04 1 die in package and 2 channels per die. 9 0x40 0x00 Unused by MRC. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xFF as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. Additionally, manufacturer name bytes are set to 0. Change-Id: If307bfb1d376e32af08af4f020f9e125f6a415dd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06mb/google/dedede/var/waddledee: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by waddledee and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all dedede variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: MT53E512M32D2NP-046 WT:E Byte# Current New Explanation 4 0x15 0x16 This part has only 1 die. Hence, density per die is 16Gb. 6 0x90 0x04 1 die in package and 2 channels per die. 9 0x40 0x00 Unused by MRC. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xFF as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. Additionally, manufacturer name bytes are set to 0. Part: NT6AP256T32AV-J2 Byte# Current New Explanation 4 0x14 0x15 This part has only 1 die. Hence, density per die is 8Gb. 6 0x90 0x04 1 die in package and 2 channels per die. Manufacturer name bytes are set to 0. Change-Id: I7a68a29ca3632e22f3960c9fc44acf3ce4f87c9c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-02mb/google/dedede: Add SD card supportAamir Bohra
1. Configure SD card GPIOs. 2. Set SD card power polarity and card detect configs. SD card CMD. DATA and CLK GPIOs are set for native pad termination as per recommendation in EDS vol1 section 10.4.10 BUG=b:150872580 TEST=Verify SD card enumeration and read/write transactions. Change-Id: I90c8ceb85ada23718ff7b6fd7013317c818dd532 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-02mb/google/dedede: Enable coreboot lock down configAamir Bohra
TEST=Build and boot waddledoo board Change-Id: Ic10af9a0d50946a98a5c4a77b492d242cef171ca Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41535 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-29mb/google/dedede: Enable Heci1 deviceAamir Bohra
Enable heci1 device from devicetree for PCI enumeration. This is required for ME status dump using HFSTSx resgisters in PCI config space. Heci1 device is later disabled through heci disable flow. TEST=Build, boot waddledoo. ME status dump is seen in console logs. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: Icb77db3f0666c2d14ebef2c3214564346d1fd3c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-29mb/google/dedede: add new SPD SPD_LPDDR4X_200b_4Gb_3733_DDP_1x16Marco Chen
The first DRAM part supported by SPD_LPDDR4X_200b_4Gb_3733_DDP_1x16 is NT6AP256T32AV-J2 so the SPD content is generally extracted from it's SPD. On the other hand, SPD bytes 4 / 6 / 13 were amended to follow SoC's requirement. BUG=b:152277273 BRANCH=None TEST=build the image successfully. Change-Id: If6fb0855a961d1c68315a727466bf45569cf2597 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41813 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28mb/google/dedede: Enable Intel Speed Shift TechnologyKarthikeyan Ramasubramanian
Enable Intel Speed Shift Technology (ISST) by default. Disable ISST in waddledee and waddledoo variants on early phases. BUG=b:151281860 TEST=Build and boot the mainboard. Ensure that cpufreq driver to configure P-states is enabled in kernel on boards where board version is provisioned. Change-Id: Id65d7981501c2f282e564bfc140f8d499d5713e8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-05-18mb/google/dedede: update SPD name based on DRAM characteristicMarco Chen
The index of DRAM_STRAPS indicates to a specific DRAM characteristic instead of a DRAM part number therefore update the existing DRAM SPD binary to the naming by DRAM characteristic. BUG=b:152019429 BRANCH=None TEST=build the image and verify that coreboot log shows the correct SPD info Change-Id: I8ffcf156f37a465209740c5e2a34effb5f1f5d5c Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mb/google/dedede/variants/waddledoo: Modify ELAN touchscreen slave addressIan Feng
Modify ELAN EKTH6918 USI touchscreen slave address to 0x10. BUG=b:152936745 TEST="emerge-dedede coreboot chromeos-bootimage", build successful. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I999967b0f37c82ff7811e3b6117baab795a11195 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06mb/google/dedede: Enable PMC, P2SB and PCH SPI in the devicetreeKarthikeyan Ramasubramanian
BUG=None TEST=Build and boot the mainboard. Change-Id: I1aae4adf1c13fd4ff58aa38a877f34e142f320f1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41037 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/google/dedede: Fix crossystem wpsw_cur errorSubrata Banik
Add GPIO_PCH_WP (GPP_C11) to associate GPP_PCH_WP with community zero. TEST=Build coreboot, flash, boot to and log into kernel, execute "wp enable" in console, execute "crossystem" at kernel prompt and verify that "wpsw_cur" shows as being "1", Execute "wp disable" in console, execute "crossystem" at kernel prompt and verify "wpsw_cur" is 0. Change-Id: Ie4ae1365a7611b8be3e795798c171e3f7ea9e417 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40744 Reviewed-by: Usha P <usha.p@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/google/dedede: Enable USB port for camera supportIan Feng
Support USB Chicony user facing camera. BUG=b:155109736 BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using user facing camera. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I7580a58086977e239dca49c1def4f03583831662 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mb/google/dedede: Remove pad termination for RAM_STRAP_4Karthikeyan Ramasubramanian
The stuffed resistor straps are weaker compared to the internal pull-up. This can cause the GPIO to read '1' always. Remove the internal pull-up. Also read the GPIO only on the boards where the board version is populated. BUG=b:154301008 TEST=Build and boot the mainboard. Change-Id: Ib640211b9f50dfb0174a570eda1625bacbebb855 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01mb/google/dedede: Enable camera support for waddledooPandya, Varshit B
BUG=None BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using world facing camera. Change-Id: I51dcf96a82535fc1e0b9247fd52af919885575e5 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mb/google/dedede: Add ACPI support for cameraPandya, Varshit B
1. Add support as per the schematics 2. Add 2 Ports and 2 Endpoints 3. Add support for OTVI8856 and OTVI5676 4. Add ON and OFF logic as Power Rails are same for both sensor BUG=None BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using world facing camera. Change-Id: Ic8687bce4896d9fc17b2190b8d11618af3515cc1 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mb/google/dedede: add new variant for wheeliePeichao Wang
Add initial support for wheelie variant board. BUG=b:154664137 BRANCH=None TEST=build Change-Id: Id638e987f45c247dae824f221a38ccf32626572f Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-04-20mb/google/dedede: Disable dynamic clock gating for cr50's GPIOIan Feng
Disable dynamic clock gating for the community cr50's IRQ lives on. That IRQ is pulsed very quickly, and with clock gating enabled pulses tend to be missed. This is expecially true on the default 0.0.22 firmware that cr50 comes with out of the factory. BUG=b:154178408 b:154293730 BRANCH=None TEST=build waddledoo successful and Linux has no TPM IRQ timeout error. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I2b1b3ee59ebf6adce0653e7550b457e02d3c87df Reviewed-on: https://review.coreboot.org/c/coreboot/+/40480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-04-20mb/google/dedede: Read DRAM population strapKarthikeyan Ramasubramanian
Configure DRAM population strap GPIO according to the schematics. Configure an internal pull-up to support the boards in which the strap is not populated. Read the strap and pass that information to FSP for memory initialization. BUG=b:152275658, b:154301008 TEST=Build and boot the mainboard. Ensure that the strap information is read as expected and passed to FSP. Change-Id: I69583f35ffc219bae9ce06bd4ba9898ed0d4d21d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39812 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/google/dedede: remove samsung-K4U6E3S4AA-MGCL.spd.hexMarco Chen
The samsung-K4U6E3S4AA-MGCL.spd.hex is not used and planed by anyone yet. On the other hand, the spd content is not correct based on JSL spec as well. BUG=b:153426401 TEST=build waddledoo and waddledee successfully. Change-Id: If71e3ef2e3385378633549bf8709a1cd6ecc0dd3 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-04-14mb/google/dedede: Enable ELAN touchscreen for WaddledooDtrain Hsu
Add ELAN EKTH6918 USI touchscreen support. BUG=b:152936745 TEST="emerge-dedede coreboot chromeos-bootimage", build successful. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I030c7d7e76a9705be06fe907c4ac279e247cb163 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-04-14mb/google/dedede: Enable SIS touchscreen for WaddledooDtrain Hsu
Add SiS9813 USI touchscreen support. BUG=b:152936541 TEST="emerge-dedede coreboot chromeos-bootimage", build successful. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Id04c46c763fdf68418bf2e97be4c8bb6bb73c749 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40250 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-29 18:59:43 +0000