summaryrefslogtreecommitdiff
path: root/src/mainboard/google/glados/variants
AgeCommit message (Collapse)Author
2019-06-06mb/google: Add GPU panel settings for SKL/KBL boardsNico Huber
The values are generated from the respective VBTs. Change-Id: Ic74e9dac898c17ce64a94b06682997a39daeff69 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30247 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-07mb/google/glados: Refactor to get rid of `pei_data`Nico Huber
The SoC specific `struct pei_data` was filled with values that were later only consumed by the mainboard code again. Avoid jumping through this hoop and fill FSP UPDs directly. Change-Id: I040f4a55b4f4bad3f6072920e5e2eceded4cb9bb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-04-06{mb,soc/intel/skylake}: remove unused InternalGfxMaxim Polyakov
The InternalGfx option in devicetree.cb is not used to enable iGPU. The patch removes this option from chip.h and mb/*/devicetree.cb files for all boards with skl/kbl processor. Change-Id: I41ecca3fdfb1d4b20ee634a13263ff481dcf440e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-01soc/intel/skylake: Unify serial IRQ optionsNico Huber
We had two ways to configure the serial IRQ mode. One time in the devicetree for FSP and one time through Kconfig for coreboot. We'll use `enum serirq_mode` from soc/intel/common/ as a devicetree option instead. As the default is `quiet mode` here and that is the most common mode, this saves us a lot of lines. In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting settings in devicetree and Kconfig. We'll maintain the `continuous` selection, although it might be that coreboot overrode this earlier on the kblrvps. Note: A lot of Google boards have serial IRQ enabled, while the pin seems to be unconnected? Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-18soc/intel/skylake: Use real common code for VMX initNico Huber
Use the common VMX implementation, and set IA32_FEATURE_CONTROL lock bit per Kconfig *after* SGX is configured (as SGX also sets bits on the IA32_FEATURE_CONTROL register). As it is now correctly based on a Kconfig, the `VmxEnable` devicetree setting vanishes. Test: build/boot google/[chell,fizz], observe Virtualization enabled under Windows 10 when VMX enabled and lock bit set. Change-Id: Iea598cf74ba542a650433719f29cb5c9df700c0f Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/29682 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-03mb/google/{glados & variants}: Remove duplicated HAVE_SMI_HANDLERElyes HAOUAS
HAVE_SMI_HANDLER is already selected in soc/intel/skylake/Kconfig Use "smm-$(CONFIG_HAVE_SMI_HANDLER)" in Makefile.inc files. Change-Id: Ia60e34ee03958b05f2ac0c326632b6dd9f02a2e0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-29mb/google/glados/variants/caroline/devicetree.cb: Remove unneeded white spacesElyes HAOUAS
Change-Id: I7fdf8934187d2786fdac23ed4460147867c25044 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30460 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-11-15ec/google/chromeec/acpi: Rename EC_ENABLE_TABLET_EVENT configKarthikeyan Ramasubramanian
Rename EC_ENABLE_TABLET_EVENT config as EC_ENABLE_MULTIPLE_DPTF_PROFILES since it aligns with the use-case. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes (base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: If147f1c79ceaaed00e17ec80ec6c912a8f7a8c2e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-10-23src: Remove unneeded whitespaceElyes HAOUAS
Change-Id: I6c77f4289b46646872731ef9c20dc115f0cf876d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-18mb/google/glados/variants/sentry: Remove unnneded whitespaceElyes HAOUAS
Change-Id: Ibc928dc66e00dbb40d25420fd92f6c5f8049dec1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28703 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-30google/caroline: Change debounce time for jack insertion and ejectionMatt DeVillier
Adapted from chromium commit 7633daa [caroline: Change debounce time for jack insertion and ejection] We are using max debounce time. During this time line, MICBIAS will be zero because of jack chasis. At the moment we got 0 button (PLAY/PAUSE) We need to reduce this time to below 100ms for caroline device. BUG=b:79559096 TEST=see there is no more irq before jack insertion/ejection irq complete Original-Change-Id: Ib6abdb4ff041823ca89f74cf59e2bfa644bb0d6a Original-Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Original-Reviewed-on: https://chromium-review.googlesource.com/1143109 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Wonjoon Lee <woojoo.lee@samsung.com> Change-Id: I8f605989d6ffc8a75127ed6722e7a37db95029ed Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27659 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26google/caroline: Add missing audio codec infoMatt DeVillier
Add audio codec definitions in devicetree, which were accidentally dropped when upstreaming Test: build/boot Caroline with GalliumOS 3.0a2, verify working audio. Change-Id: I707b93c83f773cde2108b75ec550a15e5566d974 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27626 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26google/caroline: Fix I2C2 ACPI device definitionMatt DeVillier
Remove duplicate FMCN package for I2C2, since already generated by the devicetree-linked generic i2c driver. This fixes an ACPI parsing error which resulted in the touchpad and touchscreen being non-functional. Test: build/boot Caroline with GalliumOS 3.0a2, verify touchpad and touchscreen functioning properly, no ACPI errors in dmesg. Change-Id: I68315daf087aef0fc51411605b054e6322d5d7f8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-24google/glados: use level trigger for touchpad interruptMatt DeVillier
Coolstar's custom touchpad drivers for Windows require level triggering, and the Linux drivers don't care/perform identically either way. Set touchpad interrupt to level trigger, matching change made to other Chromebooks. Test: boot Windows 10 on google/chell, verify touchpad functional Change-Id: Id5f145b8b24c04f9c6661710a0cda95f135293e9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24google/glados: enable VMX for all variantsMatt DeVillier
Explicitly enable VMX, as some OSes (eg, Windows) need VMX feature enabled and locked in order to fully support virtualization Test: boot Windows 10 on google/chell, verify OS reports virtualization enabled Change-Id: I53ff575755a9ca376dbf953db96191c17bf57f5f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24google/asuka: Add as a variant of gladosMatt DeVillier
Add google/asuka (Dell Chromebook 13 3380) as a variant of glados Skylake reference board: - add asuka-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/asuka, verify correct functionality Change-Id: I591578fea2514a28c75177835807c3f250904577 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27421 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-24google/cave: Add as a variant of gladosMatt DeVillier
Add google/cave (Asus Chromebook Flip C302SA) as a variant of glados Skylake reference board: - add cave-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/cave, verify correct functionality Change-Id: I5c5181ce68f7a24ccd49f53ecd9d48c081fd085a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24google/caroline: Add as a variant of gladosMatt DeVillier
Add google/caroline (Samsung Chromebook Pro) as a variant of glados Skylake reference board: - add caroline-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree - add caroline-specific memory-init param to romstage - adjust mainboard EC SCI events for boards with tablet function Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/caroline, verify correct functionality Change-Id: I611a4e76581ba2e5b42e1bc48b0a5b8c70f3598e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24google/sentry: Add as a variant of gladosMatt DeVillier
Add google/sentry (Lenovo Thinkpad 13 Chromebook) as a variant of glados Skylake reference board: - add sentry-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree - add sentry-specific GPIO determination of which audio codec is present Adapted from Chromium branch firmware-glados-7820.B, commit b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX] Test: build/boot google/sentry, verify correct functionality Change-Id: I783422aedac8b7fc52098eebd05b2061a1011b60 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27418 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-21google/lars: Convert to a variant of gladosMatt DeVillier
Convert lars to a variant of glados Skylake reference board: - add lars-specific DPTF, EC config, GPIO config, Kconfig, NHLT config, PEI data, VBT, SPD data, and devicetree - add conditional generation of NHLT ACPI data for Maxim codec, including override of OEM ID and OEM table ID - remove existing lars board/directory Test: build/boot google/lars, verify functionality unchanged from pre-variant configuration Change-Id: Iab37f1b92b0f3a5d99796f916a6fdcc14ce4eef4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27413 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-21google/chell: Convert to a variant of gladosMatt DeVillier
Convert chell to a variant of glados Skylake reference board: - add chell-specific DPTF, EC config, USB port defs, GPIO config, NHLT config, PEI data, VBT, SPD data, and devicetree - add romstage handler to turn on keyboard backlight for boards so equipped - remove existing chell board/directory Test: build/boot google/chell, verify functionality unchanged from pre-variant configuration Change-Id: I7dfbafe3afcab7cee7bcb2bf91c6733c07b409c4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-21google/glados: Convert to variant setupMatt DeVillier
Convert Skylake reference board glados to variant setup in preparation for merge with existing Skylake boards chell and lars, and upstreaming of new boards asuka, caroline, cave, and sentry. The following changes have been made: - move DPTF to variant subdir - move non-common EC defs to variant subdir - adjust Kconfig for variant setup - move non-common NHLT config to variant Kconfig - make non-common NHLT ACPI code conditional - move devicetree to variant subdir - move board GPIO defs to variant subdir - move board PEI data to variant subdir - move SPD index calculation to romstage so available for dual-channel determination during PEI for boards which need it - move SPD compilation to variant makefile - add weak function for determination of dual-channel RAM - add weak function for mainboard_gpio_smi_sleep() so SKL-Y variants can override and power down rails as needed Test: build google/glados Change-Id: I41615979dc11b5a10e32d6b5f477a256735cde53 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-16 21:34:13 +0000