index
:
coreboot
2560p
820g2
autoport-hsw
broadwell_refcode
e6230
e7240_bdw
haswell-mrc
hp820g1
hp9480m
mec1322
Some coreboot project code with my work
vimacs
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
src
/
mainboard
/
google
/
kahlee
Age
Commit message (
Expand
)
Author
2018-05-23
mb/google/kahlee/dsdt.asl: Add method _SWS
Richard Spiegel
2018-05-22
mainboard/google/kahlee: Update RW_LEGACY size in fmap
Martin Roth
2018-05-22
google/kahlee: Swap UNIFIED_MRC_CACHE and RW_SECTION_A in fwmap
Daniel Kurtz
2018-05-21
google/kahlee: Reduce UMA memory to 32MB
Marshall Dawson
2018-05-21
google/grunt: Reduce UMA memory to 32MB
Marshall Dawson
2018-05-08
mb/google: Get rid of device_t
Elyes HAOUAS
2018-05-08
src/mainboard: Set ACPI OEM ID values to 6 characters long
Martin Roth
2018-05-04
mainboard/google/kahlee: Pass oscout system clk to da7219
Akshu Agrawal
2018-05-04
google/kahlee: Revert "Resume on AC insertion"
Martin Roth
2018-05-04
mainboard/google: Comment variant names in Kconfig
Martin Roth
2018-05-03
mainboard/google/kahlee: Update grunt touchscreen in devicetree
Martin Roth
2018-05-02
google/kahlee: Set SPI 100 MHz and SPI Dual Read IO mode
Marc Jones
2018-05-02
mb/google/kahlee/variants/grunt: Enable BayHub720 driver
Simon Glass
2018-04-27
google/kahlee: Remove VBOOT_VBNV_CMOS
Marc Jones
2018-04-27
google/kahlee: Add RW_NVRAM to FMAP
Marc Jones
2018-04-26
mainboard/google/kahlee: Set SPI speed in bootblock
Marc Jones
2018-04-26
mb/google/grunt: Add grunt touchpad wake GPE to devicestree
Daniel Kurtz
2018-04-26
mainboard/google/kahlee: Enable EC wake on GPIO24
Daniel Kurtz
2018-04-26
mainboard/google/kahlee: Fix EC_SMI_GPI
Daniel Kurtz
2018-04-24
mb/google/kahlee/variants/baseboard/gpio.c: move all non-critical gpios
Richard Spiegel
2018-04-24
compiler.h: add __weak macro
Aaron Durbin
2018-04-20
soc/amd/stoneyridge/include/soc/southbridge.c: Rename gpio structure
Richard Spiegel
2018-04-18
soc/amd/stoneyridge/include/soc/gpio.h: Remove vendor code reference
Richard Spiegel
2018-04-18
mb/google/kahlee/variants/kahlee/gpio.c: Convert GPIO to new format
Richard Spiegel
2018-04-17
mainboard/google/kahlee: Add EC back into grunt devicetree
Martin Roth
2018-04-17
mainboard/google/kahlee: Update EC pins from GPIOs to GPEs
Martin Roth
2018-04-16
google/kahlee: Resume on AC insertion
Marshall Dawson
2018-04-16
mb/google/kahlee: Select BT I2S PAD on ACP_BT_UART mux
Akshu Agrawal
2018-04-13
src/mainboard/kahlee: Turn on keyboard backlight on grunt
Martin Roth
2018-04-13
mb/google/kahlee: Fix IRQ routing
Richard Spiegel
2018-04-11
src/amd/stoneyridge: Fix a typo (EDGEL_TRIG -> EDGE_TRIG)
Jonathan Neuschäfer
2018-04-11
mainboard/google/kahlee: Enable Keyboard backlight for Grunt
Martin Roth
2018-04-10
mainboard: Make OemCustomize.c available at romstage
Richard Spiegel
2018-04-05
mainboard/google/kahlee: Update WP to active low
Martin Roth
2018-03-21
mainboard/google/kahlee: Update GPIOs based on board ID
Martin Roth
2018-03-21
mb/google/kahlee: Add register address mapping for FCH MISC
Akshu Agrawal
2018-03-20
mainboard/google/kahlee: Initialize EC earlier in the bootblock
Martin Roth
2018-03-19
soc/amd/stoneyridge/southbridge.c: Remove configure_stoneyridge_uart
Richard Spiegel
2018-03-09
mainboard/google/kahlee: Set GPIO 40 to input
Martin Roth
2018-03-09
mainboard/google/kahlee: Disable Bayhub part on board_id 0
Martin Roth
2018-03-08
mb/google/kahlee: Do not define SIO_EC_ENABLE_COM1
Daniel Kurtz
2018-03-08
mb/google/kahlee: Add SKU support
Simon Glass
2018-03-01
mb/{amd/gardenia,google/kahlee}: Initialize GPIOs earlier
Justin TerAvest
2018-02-22
mb/google/kahlee/mainboard.c: Fix mainboard_picr_data
Richard Spiegel
2018-02-22
mb/google/kahlee: Use GPIO macros for baseboard
Justin TerAvest
2018-02-22
mb/google/kahlee: Correct bad gpio entry
Justin TerAvest
2018-02-21
mainboard/google/kahlee: Add tis_plat_irq_status
Chris Ching
2018-02-20
mb/google/kahlee/OemCustomize.c: Disable bank interleave
Richard Spiegel
2018-02-17
soc/amd/stoneyridge: Normalize GPIO init
Justin TerAvest
2018-02-14
mb/*/spd: Use normal binary numbers (0b0010) instead of special format (2b0010)
Jonathan Neuschäfer
[next]