index
:
coreboot
2560p
820g2
autoport-hsw
broadwell_refcode
e6230
e7240_bdw
haswell-mrc
hp820g1
hp9480m
mec1322
Some coreboot project code with my work
vimacs
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
src
/
mainboard
/
google
/
reef
/
variants
Age
Commit message (
Expand
)
Author
2017-03-20
mainboard/google/snappy: Update _hid name for weida touchscreen
Wisley Chen
2017-03-19
mb/google/reef: Remove CPU throttling effect of the charger sensor
Sumeet Pawnikar
2017-03-16
mainboard/google/reef: Increase PL2 Max to 15W
Tim Chen
2017-03-14
google/sand: Remove support for tablet mode switch
Katherine Hsieh
2017-03-10
google/sand: Add devicetree.cb file for sand
Katherine Hsieh
2017-03-10
mainboard/google/reef: Modify TCPU, TSR2 and TRT table
Tim Chen
2017-03-10
mainboard/google/reef: Configure SDCARD card detect pin
Venkateswarlu Vinjamuri
2017-03-09
google/pyro: Update DPTF settings
Kevin Chiu
2017-03-08
mainboard/google/snappy: Override USB2 phy setting
Wisley Chen
2017-02-25
mainboard/google/reef: keep LPSS_UART2_TXD high in suspend state
Aaron Durbin
2017-02-22
acpi: Add ACPI_ prefix to IRQ enum and struct names
Furquan Shaikh
2017-02-20
drivers/i2c: Use I2C HID driver for wacom devices
Furquan Shaikh
2017-02-15
mainboard/google/reef: add sand variant
YH Lin
2017-02-13
mainboard/google/snappy: Update DPTF settings
Wisley Chen
2017-02-11
mainboard/google/reef: Increase PL1 sampling period
Sumeet Pawnikar
2017-02-07
mainboards/google/reef: Add support for tablet mode switch.
Gwendal Grignou
2017-02-04
Revert "google/pyro: remove Wacom touchscreen probed flag"
Kevin Chiu
2017-02-03
mainboard/google/snappy: Set PL2 override to 15000mW
Harry Pan
2017-01-31
mainboard/google/reef: remove NHLT DMIC 1ch and 2ch configuration
Sathyanarayana Nujella
2017-01-31
mainboard/google/reef: Set edge triggered interrupt for GPIO_22
Vaibhav Shankar
2017-01-29
mainboard/google/snappy: Update WDT touchscreen device
Furquan Shaikh
2017-01-29
mainboard/google/pryo: Update touchscreen device ACPI nodes
Furquan Shaikh
2017-01-29
i2c/generic: Allow GPIOs to be put in _CRS and PowerResource in ACPI
Furquan Shaikh
2017-01-29
mainboard/google/reef: Set IOSSTATE for trackpad I2C GPIOs
Vaibhav Shankar
2017-01-26
google/pyro: Add USB2 phy setting override
Kevin Chiu
2017-01-26
google/pyro: Disable Wacom touchscreen probed
Kevin Chiu
2017-01-25
google/pyro: Modify Wacom touchscreen IRQ type to level-triggered
Kevin Chiu
2017-01-23
google/pyro: Update DPTF settings
Kevin Chiu
2017-01-22
mainboard/google/reef: Increase TSR1 trigger point
Tim Chen
2017-01-21
mainboard/google/reef: remove internal pullups on PP1800_S rail
Aaron Durbin
2017-01-20
google/snappy: Add weida touchscreen support
Wisley Chen
2017-01-20
google/snappy: Use exported GPIOs and ACPI regulator for touchscreen
Wisley Chen
2017-01-19
mainboard/google/snappy: Disable unused devices
Wisley Chen
2017-01-19
mainboard/google/reef: Ignore Audio DMIC IOSSTATE
Vaibhav Shankar
2017-01-17
Revert "mainboard/google/snappy: Add PowerResource for ELAN touchscreen"
Martin Roth
2017-01-17
mainboard/google/reef: Ignore SPI IOSTANDBY
Lijian Zhao
2017-01-17
mainboard/google/snappy: Add PowerResource for ELAN touchscreen
Wisley Chen
2017-01-13
google/pyro: Add ELAN touch screen support
Kevin Chiu
2017-01-03
google/snappy: Update DPTF settings
Wisley Chen
2017-01-03
mainboard/google/reef: Update DPTF parameters EVT1_v0.3
Tim Chen
2016-12-17
google/reef: Use exported GPIOs and ACPI regulator for touchscreen
Furquan Shaikh
2016-12-16
drivers/i2c/generic: Allow mainboards to export reset and enable GPIOs
Furquan Shaikh
2016-12-13
mainboard/google/reef: implement phase enforcement pin
Aaron Durbin
2016-12-12
google/pyro: Set PL2 override to 15000mW
Kevin Chiu
2016-12-08
mainboard/google/reef: Set PL2 override to 15000mW
Sumeet Pawnikar
2016-12-02
google/pyro: set i2c bus timings by rise/fall times
Kevin Chiu
2016-12-02
mainboard/google/reef: Add all DMIC endpoints
Sathyanarayana Nujella
2016-12-01
mainboard/google/reef: allow variants to modify nhlt oem revision
Aaron Durbin
2016-11-30
mainboard/google/snappy: Tune i2c frequency to 400 Khz
Wisley Chen
2016-11-29
google/pyro: disable unused devices
Kevin Chiu
[next]