summaryrefslogtreecommitdiff
path: root/src/mainboard/google/volteer/variants
AgeCommit message (Collapse)Author
2021-05-18mb/google/volteer: Update mainboard propertiesJohn Zhao
This changes updates mainboard properties by adding DFP number, PLD and power_gpio for each DFP. BUG=b:186521258 TEST=Validated Retimer firmware upgrade along with upstream kernel under no device attached scenario. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I18f29ce5f8450a8b0f8208a60b8b607f9f0d8817 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52714 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/google/volteer: Remove power_gpio from baseboardJohn Zhao
Along with upstream kernel for Retimer firmware update, coreboot defines power control for each DFP respectively under host router. This change removes the power_gpio from baseboard. Individual DFPx power_gpio will be added once the dependent definition is complete. BUG=b:186521258 TEST=Build image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Iec2437ab20d283d080752a80aa4514aa9af6897e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52711 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14mb/google/volteer: Configure TCSS OC pinsNick Vaccaro
TCSS OC pins have not been correctly configured for volteer. This patch fills the value from devicetree to correct the OC pins mapping. BUG=b:184660529 BRANCH=None TEST="emerge-volteer coreboot chromeos-bootimage", flash volteer2 and verify CpuUsb3OverCurrentPin UPDs get set correctly. Change-Id: I12da755a1d3b9ec3ed0a2dbfb0782313dd49c7e9 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-14mb/google/volteer/var/volteer: add specific wifi SAR for voltaSheng-Liang Pan
volta will use different wifi SAR from voxel. Using clamshell mode of fw config to decide to load volta wifi sar. BUG=b:184820057 TEST=build and verify wifi power as expect. Cq-Depend: chrome-internal:3824093 Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I000aefca63346c70556688f232ca54360b3badef Reviewed-on: https://review.coreboot.org/c/coreboot/+/54051 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13mb/google/volteer/variants/copano: Redefine GPIO_EC_IN_RW to GPP_F17Hao Chou
Redefine GPIO_EC_IN_RW to GPP_F17 Signed-off-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I428eb8db34c80d38899a2b823ec7193de4a8f5e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-12mb/google/volteer: Create chronicler variantSheng-Liang Pan
Create the chronicler variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:187318819 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_CHRONICLER Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Iebfea87b7c4cfc2a83e88a6c479a0842774ae018 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com>
2021-05-07mb/google/volteer: Create volet variantSheng-Liang Pan
Create the volet variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:186334008 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_VOLET Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ic6ca9a78494e3819b0fb39c0bcc70fed95c2c589 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2021-05-07mb/google/volteer/var/elemi: Add spd for K4AAG165WB-BCWEWisley Chen
Add SPD support to elemi for K4AAG165WB-BCWE BUG=b:187379245 TEST=FW_NAME=elemi emerge-volteer coreboot chromeos-wqbootimage Change-Id: I839447a9e7c7b6558b2d0877c67dc9cf89ee792a Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-05-06soc/intel/tgl,mb/google/volteer: Add API for Type-C aux bias padsTim Wawrzynczak
TGL boards using the Type-C subsystem for USB Type-C ports without a retimer attached may require a DC bias on the aux lines for certain modes to work. This patch adds native coreboot support for programming the IOM to handle this DC bias via a simple devicetree setting. Previously a UPD was required to tell the FSP which GPIOs were used for the pullup and pulldown biases, but the API for this UPD was effectively undocumented. BUG=b:174116646 TEST=Verified on volteer2 that a Type-C flash drive is enumerated succesfully on all ports. Verified all major power flows (boot, reboot, powerdown and S0ix/suspend) still work as expected. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I70e36a41e760f4a435511c147cc5744a77dbccc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-29mb/google/volteer/variants/copano: Modify touchpad I2C sequenceHao Chou
Modify touchpad I2C sequence to meet requirement. BUG=b:186372071 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot chromeos-bootimage build Pass And check the touchpad I2C5 sequence by EE. Change-Id: I9d4dcc764edfbdc14eef5ad82db20e40b31de295 Signed-off-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52690 Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-29mb/google/volteer/variant/lindar: Modify ELAN touch screen IRQ trigger methodKevin Chang
According to SED team provided ELAN touch screen SPEC. IRQ trigger method need set with level trigger, that modify IRQ trigger to level from edge. BUG=b:174972088 TEST=Build FW and boot to OS and check with test result. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I9237d9aad6166a5754afe464ce8453129a58d283 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-04-28mb/google/volteer: Add EC_HOST_EVENT_USB_MUXJohn Zhao
This changes adds the EC_HOST_EVENT_USB_MUX to be dark resume source. BUG=b:183140386 TEST=In S0ix, remove DP dongle, system does dark resume. AP and EC synchronized. AP got port partner disconnection. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I53bd4fee21e2e2d1f16f558ab0341a50ef9a0e14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52716 Reviewed-by: Tanu Malhotra <tanu.malhotra@intel.com> Reviewed-by: Abe Levkoy <alevkoy@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-26mb/google/volteer/variant/lindar: Disable acoustic mitigationKevin Chang
Roll back CPU slow slew rate setting to Intel default "SLEW_FAST_2" Because baseboard modify slow slew rate setting to "SLEW_FASE_8" for all project, but Lindar and Lillipup is using "SLEW_FAST_2", so this setting need to roll back. BUG=b:186140230 TEST=Build FW and boot to OS checking with CPU log. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I7de252b26c75f8dad218f3eb79a0988e60964f4c Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52620 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-26mb/google/volteer/variant/lindar: Create dynamic fan table mechanismKevin Chang
Add dynamic fan table mechanism for Lindar and Lillipup. Create different fan tables that provided from thermal team. BUG=b:185308432 TEST=Build FW and boot to OS modify CBI test with DPTF tool. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I1b79dbe1ae6ee7aa41cef832b4ee305cc8f4b753 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-04-21mb/google/volteer/variants/drobit: Update DPTF parametersWayne3 Wang
Update the DPTF parameters. Modify TDP, Critical Policy and Active Policy setting. BUG=b:177777472 BRANCH=firmware-volteer-13672.B TEST=build test firmware and verified by thermal team. Change-Id: Ib57de5535f3d37765ac7051c17445c311c098927 Signed-off-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ariel Chang <ariel_chang@pegatron.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-04-21mb/google/volteer/variants/copano: Modify touch controller power sequenceHao Chou
Based on the measurement, adjust the delay time between the main power rail and reset signal to 7ms in order to match the spec. of touch controller, eKTH7918U. BUG=b:184126265 BRANCH=firmware-volteer-13672.B TEST=build test firmware and verified by EE team. Change-Id: Iea84046c1b1f3fe6ab8bb89d86d00b1e89325f71 Signed-off-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-04-21mb/google/volteer/variants/copano: Fix pen ejection eventHao Chou
Modify PENH device GPIO GPP_E17 for pen ejection event. BUG=b:182867209 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot, check evtest if SW_PEN_INSERTED event (value:1/0) when insert/eject pen, and eject pen to wake system from s0ix Change-Id: I1b13d09ed6d065779de9441f2137dcf6559b8f27 Signed-off-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52494 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul2 Huang <paul2_huang@pegatron.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14mb/google/volteer: Update collis device treeFrankChu
Update device tree override to match schematics. BUG=b:182227204 TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ib1698504cc0b377659fa60b4fae25227b5823753 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-04-14mb/google/volteer: Add GPIO to collis supportFrankChu
Add support for gpio driver for collis BUG=b:182227204 TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ief225093bf93137384b64327a1c66576c9a5193a Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-04-14lillipup: provide additional VBT for lillipup OLED skuKevin Chang
Lillipup add two sku for OLED panel. Additional VBT is necessary to modify PWM source from VESA eDP AUX interface BUG=b:183630802 TEST=emerge-volteer coreboot-private-files-baseboard-volteer check vbt_oled.bin is under build folder and check in CPU log. Cq-Depend: chrome-internal:3744227 Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I576297b8296def3c37a01ae0223fa332aa9f02b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52150 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-09mb/google/volteer/var/lindar: Configure unused GPIOs as NCKevin Chang
Configure unused GPIOs as NC BUG=b:180830117 TEST=Build and boot lindar to OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I0ba51dc262ccbf22b45d3be4b65e006f92587fd8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-04-06intel/tigerlake: Add Acoustic featuresShaunak Saha
On VCCin there was an oscillation which occurred just as the kernel started (kernel starting... message). On some devices, this behavior seems even worse. In previous platforms VCCin toggled for a few ms and then was stable. For volteer, this happens at the same point in time for around 40ms. However, it starts oscillating again later in the boot sequence. Once at the root shell, it seems to oscillate indefinitely at around 100-200Hz (very variable though). To fix this we need to control the deep C-state voltage slew rate.We have options for controlling the deep C-state voltage slew rate through FSP UPDs. This patch expose the following FSP UPD interface into coreboot: - AcousticNoiseMitigation - FastPkgCRampDisable - SlowSlewRate We are setting SlowSlewRate for all volteer boards to 2 which is Fast/8. TGL has a single VR domain(Vccin). Hence, the chip config is updated to allow mainboards to set a single value instead of an array and FSP UPDs are accordingly set. BUG=b:153015585 BRANCH=firmware-volteer-13672.B TEST= Measure the change in noise level by changing the UPD values. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: Ica7f1f29995df33bdebb1fd55169cdb36f329ff8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-06mb/google/volteer/var/lindar: Increase Goodix touchscreen reset delay to 180 msKevin Chang
1. Follow GT7375P Programming Guide_Rev.0.6 to increase reset delay to 180ms. BUG=b:181711141 TEST=Build and boot lindar to OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I82222ca094eead7e9e691857e128243cfe7c310e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-25mb/google/volteer: Collis: Update SPD tableFrankChu
Add memory table to "mem_list_variant.txt", and command to generate files: go run ./util/spd_tools/lp4x/gen_part_id.go src/soc/intel/tigerlake/spd src/mainboard/google/volteer/variants/collis/memory/ src/mainboard/google/volteer/variants/collis/memory/mem_list_variant.txt DRAM Part Name ID to assign MT53D512M64D4NW-046 WT:F 0 (0000) H9HCNNNCRMBLPR-NEE 0 (0000) MT53D1G64D4NW-046 WT:A 1 (0001) H9HCNNNFBMBLPR-NEE 2 (0010) BUG=b:182227204 TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I773c65c0b6d5e868572530305ab8a61a0dd1532d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-03-24mb/google/volteer/variants/drobit: Modify touchpad power sequenceWayne3 Wang
Modify power sequence of touchpad to meet the definition in the spec. BUG=b:178353432 BRANCH=firmware-volteer-13672.B TEST=build test firmware and verified by EE team. Change-Id: I8b8e383223d017223c36044efdf21738fe26d2ea Signed-off-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51514 Reviewed-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-23mb/google/volteer/variants/delbin: Disable PmcUsb2PhySusPgEnableRavi Sarawadi
eDP panel flicker during system idle state is observed. Disabling USB2 SUS well power gating can remove flicker symptom. Please refer to doc#634894 for more details. BUG=b:182323059 BRANCH=None TEST=Boot and confirm no display flicker. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Icadf9c494fab82b219317c3ca3b04f633b543083 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2021-03-22mb/google/volteer/variants/eldrid: Include SPD for H4AAG165WB-BCWENick Vaccaro
Add SPD support to eldrid for DDR4 memory part H4AAG165WB-BCWE. Eldrid should use DRAM_ID strap ID 4 (0100) on SKUs populated with H4AAG165WB-BCWE DDR4 memory parts. BUG=b:181732562 TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds successfully. Change-Id: I38cfe3eb26b00563ce17df3a3ac2a0a846f2ae00 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51667 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-22mb/google/volteer/variants/copano: Configure specific DPTF parametershao_chou
Configure board specific DPTF parameters for copano BUG=b:176961219 BRANCH=firmware-volteer-13672.B TEST=build and verify by thermal team Change-Id: Ibce67f81503b84b58798bc198947e61907276ad3 Signed-off-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51561 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-19mb/google/volteer/var/elemi: Config GPP_B7/GPP_B8 as NCWisley Chen
elemi does not use the GPP_B7/GPP_B8, so config to NC. Currently, there is no functional impact. BUG=b:182981460 TEST=emerge-volteer coreboot, boot into OS, and suspend/resume successfully. Change-Id: I7b491fd595b0e77e6dcce08e3172dbe592f63c37 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-03-17sar: Fix semantics of `get_wifi_sar_cbfs_filename()`Furquan Shaikh
Currently, if `get_wifi_sar_cbfs_filename()` returns NULL, then `get_wifi_sar_limits()` assumes that the default filename is used for CBFS SAR file. This prevents a board from supporting different models using the same firmware -- some which require SAR support and some which don't. This change updates the logic in `get_wifi_sar_limits()` to return early if filename is not provided by the mainboard. In order to maintain the same logic as before, current mainboards are updated to return WIFI_SAR_CBFS_DEFAULT_FILENAME instead of NULL in default case. Change-Id: I68b5bdd213767a3cd81fe41ace66540acd68e26a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51485 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15mb/google/volteer/variant/lindar: Disable SA GV for Samsung memory with ↵Kevin Chang
wrong date code MB Disable SA GV, because factory used Samsung memory with wrong date code. So we need to use board version to identify build MB phase to disable SA GV. Disable SA GV when board version equal one. BUG=b:179747696 BRANCH=firmware-volteer-13672.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I51f4adcf0dd8dbf1cf39d8aec6e4303565551e5f Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-15mb/google/volteer/variants: Disable non-existing BT PCI interface and add BT ↵Cliff Huang
flag Remove the CNVi BT PCI config and add BT flag. There is no PCI host interface in this version of CNVi. TEST: BT is checked using 'lsusb -d 8087:0026' from OS to make sure BT is enumerated. Change-Id: Ic700021d7a09be63ffc2715f31992257e2e893af Signed-off-by: Cliff Huang <cliff.huang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50898 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15mb/google/volteer: Create collis variantFrankChu
Create the collis variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:182227204 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_COLLIS Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ibcf8b59b38d02517cea0a3ee474ff82fc0a2a958 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2021-03-15mb/google/volteer/variants/copano: Add gpio-keys ACPI node for PENHhao_chou
Use gpio_keys driver to add ACPI node for pen eject event. Also setting gpio wake pin for wake events. BUG=b:175519097 BRANCH=firmware-volteer-13672.B TEST=build and verify on a Copano Change-Id: Id0a132aa398abde4983af123d00e355ac61839a8 Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51249 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15mb/google/volteer: Add WiFi SAR table support for Lindar/LillipupKevin Chang
Lindar/Lillipup uses the WIFI_SAR_ID field in FW_CONFIG to pick which SAR table to load. BUG=b:178302811 BRANCH=volteer TEST=build and test no lindar/lillipup Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Ibe829062033ba8246b9d9550cdcdc360f5f67dd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com>
2021-03-15mb/google/volteer/var/lindar: Add FW_CONFIG WIFI_SAR_ID fields in devicetreeKevin Chang
Add FW_CONFIG WIFI_SAR_ID fields in devicetree. BUG=b:178302811 BRANCH=volteer TEST=build and test on lindar/lillipup Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I7ec37b80ffca6924f1f0952dcfbc43c378a70923 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51386 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10drivers/i2c: sx9310: Replace register map with descriptive namesGwendal Grignou
The current driver is using chip registers map to configure the SAR sensor, which is opaque, especially when the datasheet is not published widely. Use more descriptive names, as defined in Linux kernel documentation at https://www.kernel.org/doc/Documentation/devicetree/bindings/iio/proximity/semtech%2Csx9310.yaml BUG=b:173341604 BRANCH=volteer TEST=Dump all tables, check semtech property: for i in $(find /sys/firmware/acpi/tables/ -type f) ; do f=$(basename $i); cat $i > /tmp/$f.dat ; iasl -d /tmp/$f.dat done In SSDT.dsl, we have: Package (0x06) { Package (0x02) { "semtech,cs0-ground", Zero }, Package (0x02) { "semtech,startup-sensor", Zero }, Package (0x02) { "semtech,proxraw-strength", Zero }, Package (0x02) { "semtech,avg-pos-strength", 0x0200 }, Package (0x02) { "semtech,combined-sensors", Package (0x03) { Zero, One, 0x02 } }, Package (0x02) { "semtech,resolution", "finest" } } Change-Id: I8d1c81b56eaeef1dbb0f73c1d74c3a20e8b2fd7b Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-05mb/google/volteer: Fix FPMCU pwr/rst gpio handlingNick Vaccaro
1. No gpio control in bootblock 2. Power on and then deassert reset at the end of ramstage gpio 3. Disable power and assert reset when entering S5 On "reboot", the amount of time the power is disabled for is equivalent to the amount of time between triggering #3 and wrapping around to #2. This change affects the following volteer variants that include an FPMCU: 1. Drobit 2. Eldrid 3. Elemi 4. Halvor 5. Malefor 6. Terrador 7. Trondo 8. Voema 9. Volteer2 10. Voxel BUG=b:178094376 TEST=none Change-Id: Ib51815349cea299907c10d6c56c27bd239e499e7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-04mb/google/volteer/variants/copano: Describe USB ports in devicetreehao_chou
Modify USB port to match schematics. And assigned USB2 port to type-c use. BUG=b:177481079 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Change-Id: I25412d16df8ad809c05635022c11bd8882d002c5 Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49980 Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-03soc/intel: Retype `CnviBtAudioOffload` devicetree optionAngel Pons
The `FORCE_ENABLE` and `FORCE_DISABLE` names do not match what FSP UPDs say, and can be confused with the `PchHdaTestPowerClockGating` UPD. Replace the enum with a bool, and drop the confusing names. Note that the enum for Ice Lake was incorrect, but no mainboards used the option. Change-Id: I2c9b4c6a2f210ffca946ca196299fa672a06ccc7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51154 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-26mb/google/volteer/var/elemi: Configure IRQ as level triggered for elan_tsWisley Chen
Follow elan's suggestion to configure IRQ as level trigger to prevent touchscreen lost BUG=b:180778934 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I3aca0ad20791c989dec9e70d69d637b28c9cc043 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50417 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-26mb/google/volteer: add variant_ramstage_init()Nick Vaccaro
Add a weak variant routine to allow variants to perform any needed initialization in ramstage. BUG=b:178094376 TEST=none Change-Id: I65dc1cdf15b68d9f2239e02fcb4b2c902d749378 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50827 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-25mb/google/volteer: Fix eldrid DPTF's passive and critical policiesTim Wawrzynczak
Because the entries were formatted differently to the baseboard, the devicetree overrides didn't work as intended, and all 5 entries from the baseboard were included, and then the overrides were applied, but the baseboard's entries were kept, so there were duplicate ACPI entries, which causes errors when parsing the table. Fixes: 5f30ae3714d ("mb/google/volteer: update thermal table for Eldrid") BUG=b:181034399 TEST=compile, verify static.c is correct now Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I32fe2eae591ed4d3c08378977c463327f7ee1100 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51044 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-25mb/google/volteer/variants/drobit: Update DPTF parametersWayne3 Wang
Update the first version DPTF parameters. The TDP is down to 13w for acoustic concern. BUG=b:177777472 BRANCH=firmware-volteer-13672.B TEST=build test image and verified by thermal team. Change-Id: I36f016530a61e3660938ce8d2948bb3b0f275d88 Signed-off-by: Wayne3 Wang <Wayne3_Wang@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51030 Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-by: Ariel Chang <ariel_chang@pegatron.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mb/google/volteer: Correct AT24 NVM address sizeDaniel Kang
Currently, the address size field of AT24 NVM is incorrect, and Linux v5.4 kernel logs the message below: at24 i2c-PRP0001:02: Bad "address-width" property: 13 The valid size of the AT24 NVM is 16 bits so modify the value from 0x0D to 0x10. BUG=b:177655681 BRANCH=none TEST=Boot volteer and check the kernel log and see "Bad address-width" error message is not shown. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: Ice6c3eac1e023b981217e1d7dc06587fc46b1a02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Bingbu Cao <bingbu.cao@linux.intel.com>
2021-02-11mb/google/volteer/variants: Remove unneeded whitespace before tabElyes HAOUAS
Change-Id: I4c991e6119f14d949a2e103024132d70674f29a1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-10mb/google: order matters in mem_parts_used.txtPaul Fagerburg
* Add comments to mem_parts_used.txt to point out that the order of the entries matters when assigning IDs, so always add a new part to the end of the file. * Update existing mem_parts_used.txt to add the same comment. * No updates to Zork variants, because they use an optional ID, so the order actually doesn't matter there. BUG=b:175898902 TEST=create a new variant of dalboz, trembyle, volteer, waddledee, or waddledoo, and observe that mem_parts_used.txt has the new verbiage. Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: Iffbd8e69a89b1b7c810c5d25c7a6148d459d8b02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-02-10mb/google/volteer/var/voxel: Add settings for noise mitgationSheng-Liang Pan
Enable acoustic noise mitgation for volteer platforms. BUG=b:179328166 BRANCH=none TEST= Measure the change in noise level by changing the values in devicetree. Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I279a85c7741094bb7ddf0c1fde74b31189b12171 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-02-10mb/google/volteer: Enable external bypass, clkgate & phygateShreesh Chhabbi
This change sets the soc config options for external_bypass, external_clk_gate and external_phy_gate. BUG=b:177821896 TEST=Build coreboot for volteer Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Change-Id: I9e5218cda79d7453bf830639ccea4e5be019b070 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50290 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-07mb/google/volteer/var/voxel: Add gpio-keys ACPI node for PENHSheng-Liang Pan
Use gpio_keys driver to add ACPI node for pen eject event. Also setting gpio wake pin for wake events. BUG=b:176213181 TEST=emerge-volteer coreboot chromeos-bootimage Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: If0959df5d0f069048777df81b0d4092ea90314eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/49967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 20:45:44 +0000