summaryrefslogtreecommitdiff
path: root/src/mainboard/google/zork/variants/trembyle
AgeCommit message (Collapse)Author
2020-08-28mb/google/zork: Switch zork to use spd_toolsRob Barnes
Switch all zork boards to use generated generic SPDs from spd_tools. HMAA1GS6CMR6N-VK is unused by Ezkinil, and all other boards, so it was removed. picasso/Makefile.inc was updated to populate the 2nd APCB channel based on APCB_POPULATE_2ND_CHANNEL. This removes the need to suffix spd entires with _x1/_x2. Command to generate files: $ find src/mainboard/google/zork/variants/ -maxdepth 1 -type d | grep -v '/$' | while read b; do n=$(basename ${b}); if [ "${n}" = "baseboard" ]; then continue fi go run util/spd_tools/ddr4/gen_part_id.go src/mainboard/google/zork/spd \ src/mainboard/google/zork/variants/${n}/spd \ src/mainboard/google/zork/variants/${n}/spd/mem_parts_used.txt done BUG=b:162939176 TEST=Boot ezkinil and dalboz check dmidecod -t17 Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I0553858f83d3d1e90cf35bece108768f004a29a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44480 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-26Reland "mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OS"Furquan Shaikh
This reverts commit 81066b7ce7192432389578fc0f15b3a46da84bad. Reason for revert: The hang observed when not exposing the reset GPIOs was root caused to zork sharing the same I2C bus between touchscreen and touchpad and interleaving of messages during probe which resulted in incorrect information returned back by touchscreen firmware. Exposing the reset GPIO changed the timing of probe and hence helped workaround the hang issue. The touchscreen driver is now fixed to perform I2C transactions in a single transfer and so the hang is no longer observed when reset GPIO isn't exposed. BUG=b:162596241 BRANCH=zork Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ica11c33d542dd2324bb0b8905c5de06047cee301 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-12mb/google/zork: expose stop gpio for trembyleAaron Durbin
In CB:43701 the trembyle touchscreen parameters were not updated to expose the stop gpio properly. BUG=b:162973325 Change-Id: I6f5da1c556ba1c6ccabf699491d3b635aa79f7c0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-11mb/google/zork: move USB OC pin mapping to trembyle base boardFelix Held
The USB OC pin mapping is similar enough to move it to the base board and just have two overrides for trembyle, which is based on an older version of the schematics, and one override for woomax, which doesn't use one USB port. BUG=b:163081097 Change-Id: I7e305d7e6f51d7ef7a4c699e3bacc6bcd699d2f2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-08-08mb/google/zork/trembyle: comment why USB OC pin mapping is differentFelix Held
Change-Id: I68b7529733e604ac45919a54e094be7eeb044458 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-07mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OSMartin Roth
This reverts the code from commit 728c0787f2 that removes the reset GPIO from the touchscreen ACPI interface. That patch exposes a bug which leads to an invalid opcode trap in the touchscreen code. Reverting this gets the system working again, but is not a long-term solution. BUG=b:162596241 TEST=System boots to login screen. Change-Id: I57a070d94f961cec43834c8bedd5dafc8a54171a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43078 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Configure GPIO_89 as PAD_NCFurquan Shaikh
GPIO_89 was marked as EN_DEV_BEEP_L in pre-v3.6 schematics, but it was never really used on any of the zork variants. Starting with v3.6, GPIO_89 is left unused in schematics. This change configures GPIO_89 as PAD_NC in baseboard GPIO table. Since EN_DEV_BEEP_L still needs to be driven high to allow speakers to work, GPIO_89 is configured as PAD_GPO driven high on pre-v3.6 schematics. BUG=b:62108046 Change-Id: I026cd6cb598667ce6e115c3ec9357a6a56051d39 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44190 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06mb/google/zork: Switch USI_RESET to active low polarity for v3.6+Furquan Shaikh
v3.6 of reference schematics have switched the polarity of reset signal to touchscreen controller from active high to active low. This change updates the default configuration in baseboard gpio tables to set the reset GPIO to output low and override tables in variants to set the reset GPIO to output high. Additionally, devicetree by default exposes ACTIVE_LOW configuration for reset GPIO. In order to support pre-v3.6 boards, reset GPIO is updated to ACTIVE_HIGH based on board version. BUG=b:161937506 Change-Id: I092f274d8eb1920a1cd6d3eccbe8f26b0b28928a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-30mb/google/zork: add USB over-current pin mapping to devicetreeFelix Held
BUG=b:162010077 Change-Id: Iba3e3ec62cdfd818077017abd28fa754c2ae7797 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/zork: Don't expose reset GPIO for touchscreen to OSRaul E Rangel
The Raydium ACPI entry currently provides a reset GPIO and an _ON/_OFF method to the kernel. These are contradictory. The ownership of the GPIO should be mutually exclusive between either the OS or the FW. Since we have two methods exposed this causes the OS to reset the TS twice. Once using the _ON method, and once using the GPIO. Additionally the _ON method is waiting for 20ms after reset while the OS driver uses a 50ms delay. The Raydium TS datasheet specifies 20ms for FW ready time, so the OS driver is adding additional padding. The reference design has a 32ms rise time on the reset line. So without this patch, the OS tries to reset the TS using the _ON method and it waits for 20ms. This is not enough time for the reset line to reach high, let alone account for the FW ready time. The OS driver then tries to reset the device by toggling the GPIO. It waits 50ms which is still 2ms less than required. This CL removes the GPIO from being exported in the _CRS so the OS driver won't try and reset the device. It also increases the reset delay by 32ms to account for the rise time. This isn't a complete fix. I think that the slow rise time is causing some kind of metastability in the TS reset hardware. Using a script to bind and unbind the TS driver, the TS device becomes unresponsive after ~200 iterations. The only way to reset the device is to power cycle. The TS power is also not currently controlled by the power resource. This means that we have no guarantee over when the reset line is toggled. This will lead to issues while spending and resuming. BUG=b:160854397 TEST=Boot trembyle and make sure TS works. Suspend/Resume trembyle 300+ times. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I23131be5d7109eed660a8bd6e2c156c015aa3c4e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-23mb/google/zork: Configure all pads in ramstage for trembyle referenceFurquan Shaikh
This change configures all missing pads in ramstage for trembyle reference. This ensures that the state of all pads is set correctly for the payload/OS. Also, all the pads for the platform are configured in baseboard gpio table in ramstage to ensure that variants can override any pads if required. BUG=b:154351731 Change-Id: Idd827b6a4f995546493596f22249f8699bdf526b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-21mb/googlz/zork: Drop unnecessary PULL_UPs in variant overridesFurquan Shaikh
This change drops the pulls configured on override GPIOs as they already have external pull-ups. Also, pads which are unused are configured as PAD_NC. BUG=b:154351731 Change-Id: I8da5d51af25bbe2694c21ecb0868c9cc387243cb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-07-20mb/google/zork: Delete sleep.aslRaul E Rangel
These methods are empty and the kernel treats these as optional. BUG=b:153001807, b:154756391 TEST=Suspend and resume trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5f2b375c1186951f95b7ac44dc7158a0299013a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43465 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: Drop mainboard.aslFurquan Shaikh
This change drops mainboard.asl from zork because none of the objects defined in it are used. BUG=b:153879530 Change-Id: If5440bcbce39b4461b44acaec69561663b1ea329 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43519 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: correct wake gpe value for gpio 9Aaron Durbin
GPIO_9 is associated with gevent 22. Correct all the misconfigurations and use macros for clarity as to what bit offset is being used instead of open coding things. BUG=b:161205804 Change-Id: Ic4cfd62763d72d12a55f89585f24e07df6af0f4f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43516 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Remove redundant PCI info from overridetreesRob Barnes
This information is redundant since it's already specified in baseboard/devicetree_trembyle.cb or baseboard/devicetree_dalboz.cb domain 0 is still required because sconfig uses it as an identity anchor to match devicetree and overridetree. BUG=b:157580724 TEST=Boot zork, usb functional Change-Id: I3c3c1c2410166b99599d7343fae3ee756f4da321 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43437 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-05mb/google/zork: Use SSDT generator for Chrome EC audio codec deviceFurquan Shaikh
This change drops the inclusion of codec.asl in DSDT for `GOOG0013` device and instead uses the newly added Chrome EC audio codec driver for filling in the device node in SSDT. TEST=Verified that following node gets generated: Scope (\_SB.PCI0.LPCB.EC0.CREC) { Device (ECA0) { Name (_HID, "GOOG0013") // _HID: Hardware ID Name (_UID, One) // _UID: Unique ID Name (_DDN, "Cros EC audio codec") // _DDN: DOS Device Name Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } } Change-Id: I3e626ce01a3735ac2c966c0e95310be4c828b241 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43042 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Update ramstage GPIOs for v3 schematics for trembyle referenceFurquan Shaikh
This change updates the baseboard GPIO table in ramstage to match v3 version of trembyle reference schematics. All variants using this reference are accordingly updated to configure the GPIOs that changed as part of v3 schematics. BUG=b:157088093, b:154676993, b:157098434 TEST=Compiles Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib1d6ee2e995c1fca229c20ea63da9a45fb89f64a Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251393 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42724 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-23mb/google/zork: Add support for fingerprint deviceFurquan Shaikh
This change adds support for fingerprint device in overridetree for the following variants: 1. berknip 2. morphius 3. trembyle Generates the following node in SSDT1: Scope (\_SB.FUR1) { Device (CRFP) { Name (_HID, "PRP0001") // _HID: Hardware ID Name (_UID, Zero) // _UID: Unique ID Name (_DDN, "Fingerprint Reader") // _DDN: DOS Device Name Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { UartSerialBusV2 (0x002DC6C0, DataBitsEight, StopBitsOne, 0x00, LittleEndian, ParityTypeNone, FlowControlNone, 0x0040, 0x0040, "\\_SB.FUR1", 0x00, ResourceConsumer, , Exclusive, ) GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000, "\\_SB.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x0006 } }) Name (_S0W, 0x04) // _S0W: S0 Device Wake State Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x0A, 0x03 }) Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "compatible", "google,cros-ec-uart" } } }) } } BUG=b:147853944 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7ccb3633332ce3e388293872af7b22f1867c8465 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-27mb/google/zork: Add Picasso based Zork mainboard and variantsRaul E Rangel
This is a copy of the mb/google/zork directory from the chromiumos coreboot-zork branch. This was from commit 29308ac8606. See https://chromium.googlesource.com/chromiumos/third_party/coreboot/+/29308ac8606/src/mainboard/google/zork Changes: * Minor changes to make the board build. * Add bootblock.c. * Modify romstage.c * Removed the FSP_X configs from zork/Kconfig since they should be set in picasso/Kconfig. picasso/Kconfig doesn't currently define the binaries since they haven't been published. To get a working build a custom config that sets FSP_X_FILE is required. BUG=b:157140753 TEST=Build trembyle and boot to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3933fa54e3f603985a0818852a1c77d8e248484f Reviewed-on: https://review.coreboot.org/c/coreboot/+/41581 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-02 20:35:29 +0000