coreboot - Some coreboot project code with my work

Age	Commit message (Expand)	Author
2019-07-08	mb/google/hatch: Set GPP_D9 as enable pin for Goodix Touch Screen and	Frank Wu
2019-07-07	mb/google/hatch: Update GPIO settings for SD card and SPI1 Chip select	Krishna Prasad Bhat
2019-07-07	mb/google/hatch/var/kindred: Add Raydium touchscreen support	David Wu
2019-07-07	mb/google/hatch/var/kindred: Update ELAN GPIO/IRQ and add Synaptics Touchpad	David Wu
2019-07-07	mb/google/hatch/variants/kindred: Enable eMMC support	David Wu
2019-07-07	soc/intel/cannonlake, mb/google/sarien: Get rid of unused dev param	Furquan Shaikh
2019-07-03	mb/google/octopus: Override DDI1 DDC SDA/SCL for Garg HDMI	Kevin Chiu
2019-07-03	mb/google/octopus/variants/fleex: Enable EMR function for Grob360S	Chris Zhou
2019-07-03	mb/google/octopus: Add custom SAR values for Blooguard	Tony Huang
2019-07-02	mb/google/hatch: Set trackpad irq and wake to GPP_A21	Shelley Chen
2019-07-02	mb/google/hatch: Add INVERT to all IOAPIC pads	Shelley Chen
2019-07-02	mb/google/reef/variants/: fix Samsung K4F6E3S4HM-MGCJ density	Kevin Chiu
2019-06-28	mb/google/kohaku: Correct trackpad i2c address	Seunghwan Kim
2019-06-26	mb/google/hatch: Add a GPIO to enable/disable FPMCU power	Philip Chen
2019-06-26	mb/google/hatch: Remove pulls on NC pads	Furquan Shaikh
2019-06-26	mb/google/hatch/variants/baseboard: Update PL2 power limit value	Sumeet Pawnikar
2019-06-25	atlas: enable GEO_SAR	Caveh Jalali
2019-06-21	mediatek/mt8183: support SAMSUNG and MICRON EMCP LPDDR4X DDR bootup	Huayang Duan
2019-06-21	mb/google/octopus: Override VBT selection for Garg	Kevin Chiu
2019-06-21	mb/google/octopus: expose get_board_sku as global	Kevin Chiu
2019-06-21	mb/google/hatch/variants/kindred: Update memory strap GPIOs	David Wu
2019-06-21	sb/intel/bd82x6x: Set up io_gen_dec in romstage based on devicetree	Arthur Heymans
2019-06-21	soc/intel/skylake: Clean up Kconfig	Arthur Heymans
2019-06-21	qcs405: Update bootblock size	Nitheesh Sekar
2019-06-21	mb/google/hatch: Do not pull down GPP_F2 internally	Philip Chen
2019-06-21	google/kukui: Increase SPI flash speed to boot faster	Mengqi Zhang
2019-06-21	mediatek: Add SPI tick_dly setting	Mengqi Zhang
2019-06-21	mediatek/mt8183: Add SPI GPIO driving setting	Mengqi Zhang
2019-06-21	google/kukui: Enable RTC	You-Cheng Syu
2019-06-21	google/kukui: Revise FMAP firmware layout	Hung-Te Lin
2019-06-21	mb/google/snappy: Remove unneeded 'else'	Elyes HAOUAS
2019-06-21	mediatek/mt8183: Calibrate vsim2 to 2.7 V	Hsin-Hsiung Wang
2019-06-20	mb/google/hatch: Remove unused USB2 port5 from baseboard devicetree	Aamir Bohra
2019-06-19	grunt: Change Bayhub eMMC base clock to 200MHz	Raul E Rangel
2019-06-19	src/mainboard: Remove unused include <arch/byteorder.h>	Elyes HAOUAS
2019-06-19	mb/google/hatch/variants/hatch: Adjust all I2C CLK to meet spec	John Su
2019-06-17	mb/google/poppy/variants/atlas: Update DPTF parameter	Puthikorn Voravootivat
2019-06-16	mb/google/hatch: Move memory strap GPIOs under variant gpio header	Aamir Bohra
2019-06-15	mainboard/google/hatch: Scrub Helios GPIOs	Tim Wawrzynczak
2019-06-15	mb/google/octopus/variants/bloog: Set tcc offset for bloog	Tony Huang
2019-06-14	mb/google/poppy/var/nami: Ensure SPD index is non-zero	Jacob Garber
2019-06-14	hatch: Fix pen eject wake polarity	Tim Wawrzynczak
2019-06-14	mainboard/google/hatch: Update Helios device tree	Tim Wawrzynczak
2019-06-13	mb/google/hatch/variants/helios: Use LPDDR3 memory	Paul Fagerburg
2019-06-13	mb/google/sarien: Disable unused GPIOs	Duncan Laurie
2019-06-13	mb/google/{hatch, sarien, arcada}: Make HECI1 chip config disable	Subrata Banik
2019-06-12	mb/google/octopus: make new targets have DRAM part in CBI by default	Aaron Durbin
2019-06-12	{drivers,soc/intel/braswell}: Implement C_ENVIRONMENT_BOOTBLOCK support	Frans Hendriks
2019-06-12	mb/google/hatch: Disable dynamic clock gating for cr50's GPIO	Subrata Banik
2019-06-12	Revert "mb/google/poppy/variants/atlas: enable NVMe"	caveh jalali