summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2016-10-08google/gru: Add USB 2.0 PHY tuning for Kevin PHY0 and PHY1William wu
We found that Kevin board PHY0 and PHY1 eye-diagram margin is not enough to make compliance test pass, and the PHY0 USB SI is worse than PHY1, because of the higher PCB impedance. For PHY0, we can't improve the eye-diagram by SW PHY tuning, so we need to reduce the RBIAS resistance from 133 ohm to 115 ohm, it can help to increase the eye-height. For PHY1, we can improve the eye-diagram by setting the max pre-emphasis level. And after the above change, the USB2 signal amplitude will become larger at the test point near to SOC USB2 PHY, in order to avoid mis-trigger the disconnect detection (650mV), we need to disable pre-emphasize in eop state. BRANCH=None BUG=chrome-os-partner:53863 TEST=do USB 2.0 compliance test for Kevin C0 and C1 port. Change-Id: I95c0acd79623aeca9a0ae077b1dd3836d91fe561 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: de3cdef128966d76e7d8e2ebd641763b911c3ad5 Original-Change-Id: I00cb325b9938e4276cc77b5d6f5faa7023379608 Original-Signed-off-by: William wu <wulf@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/390615 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16911 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07google/reef/variants/pyro: Add support for GPIO output polarityMartin Roth
commit 028200f7 - x86/acpi_device: Add support for GPIO output polarity updated ACPI_GPIO_OUTPUT to ACPI_GPIO_OUTPUT_ACTIVE_HIGH for the other boards that needed it, but pyro wasn't in the tree when it was initially pushed. Now that pyro is in the tree, it needs to be updated as well. Change-Id: I617999b06ee584e0543d7ae3232bb2be2ff7429c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16930 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-10-07src/mainboard: Remove whitespace after sizeofElyes HAOUAS
Change-Id: Ie2a047d35e69182812c349daedc5b3b5fde20122 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16860 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07src/mainboard: Remove unnecessary whitespaceElyes HAOUAS
Change-Id: I35cb7e08d5233aa5a3dbb4631ab2ee4dc9596f98 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16849 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07x86/acpi_device: Add support for GPIO output polarityFurquan Shaikh
Instead of hard-coding the polarity of the GPIO to active high/low, accept it as a parameter in devicetree. This polarity can then be used while calling into acpi_dp_add_gpio to determine the active low status correctly. BUG=chrome-os-partner:55988 BRANCH=None TEST=Verified that correct polarity is set for reset-gpio on reef. Change-Id: I4aba4bb8bd61799962deaaa11307c0c5be112919 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/16877 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-07google/gru: drive WLAN_MODULE_RST# low as early as possibleBrian Norris
GPIO1_B3 (WLAN_MODULE_RST#) defaults as a pull-up input, but it is also "pulled up" by 1.8V_WLAN. However, 1.8V_WLAN remains low for some time during early boot. This leaves the signal floating somewhere in the middle. This has two potential issues: (1) we're leaking some power for some (hopefully) short period of time (2) we are possibly screwing with the Wifi power sequence; we aren't supposed to deassert PDn (i.e., MODULE_RST#) until all the rails have fully ramped for some period of time Neither of the above issues are likely to be significant, but it is nice to fix, I expect. BRANCH=gru BUG=chrome-os-partner:54026 TEST=measure WLAN_MODULE_RST# on scope at boot time Change-Id: Ia6af9ad6954ad8feeda33015e3f205842380939e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0e890a2787bf034d3358a33fc88c2dd8078593ab Original-Change-Id: I120e26ad0ca486a326874986e142dcaee965b62d Original-Signed-off-by: Brian Norris <briannorris@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/388009 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16882 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07google/gru: set W2W_DIFFCS_DLY to 5Lin Huang
PHY_PER_CS_TRAINING is being enabled when DDR frequency >= 666. For per cs training, the controller should consider the PHY delay line switch time and there should be more cycles to switch the delay line, so update the W2W_DIFFCS_DLY_ value from 0x1 to 0x5. BRANCH=none BUG=chrome-os-partner:56940 TEST=do memtester on kevin board, and pass Change-Id: I00df2d4724b0b77f3e7565809fb35bbd2ff01ea5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c135ea3e33d810ed322d947eb8d512d1ac119cfc Original-Change-Id: I81b99cbc085769b7028e770509d79bd8d550820b Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/387506 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16721 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07google/gru: pass apio number to arm-trust-firmwareLin Huang
To save power when entering suspend, gpios 2 to 4 need to be set to input and 'pull none' mode. Pass the APIO configuration to ATF so it can do a proper job here. BRANCH=None BUG=chrome-os-partner:56423 TEST=run suspend_stress_test on kevin board Change-Id: Id57fe8f622ae3f9c2bc7e58be89518b2b846cd37 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c42082d1ca9a6baa735821382d3e83c1f8dc9ad Original-Change-Id: Iaf441e8e34c5591ffe7c65f6533fcf0b733ff5ac Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/378475 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16720 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07google/gru: pass the gpio power supply enable pin to bl31Lin Huang
We need to disable some regulators when the device goes into suspend. This means that we need to pass some gpios to bl31, and disable these gpios when bl31 runs the suspend function. BRANCH=None BUG=chrome-os-partner:56423 TEST=enter suspend, measure suspend gpio go to low [pg: also update arm-trusted-firmware to match] Change-Id: Ia0835e16f7e65de6dd24a892241f0af542ec5b4b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0f3332ef2136fd93f7faad579386ba5af003cf70 Original-Change-Id: I03d0407e0ef035823519a997534dcfea078a7ccd Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/374046 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16719 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07mainboard/google/reef: add pyro variant.Kevin Chiu
Create the initial Pyro variant which refers to the Reef. Pyro is APL Chrome board that deviate from reference board Reef. BRANCH=master BUG=None TEST=Build Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Change-Id: I9beed1f6895e8891d3d51b563edfe172f566718b Reviewed-on: https://review.coreboot.org/16855 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-06rockchip: rk3399: improve write leveling flowJianqun Xu
To improve sdram 800MHz and 933MHz stability, we need to modify write leveling flow to get the proper write leveling value. BUG=chrome-os-partner:56940 BRANCH=none TEST=Boot from kevin on 933MHz, and do stressapptest Change-Id: I5b24c93d4a57917fb9af7e5e2a95d8423ccbaa7e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d84bf25b3e5de373c7913e6d534a810cb984b3fd Original-Change-Id: I87efddf628c3683fcb85d6875e029cf3cbc482be Original-Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/384292 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16716 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06google/gru: Shrink RW_ELOG region to 4KBJulius Werner
Since there's currently a limitation in coreboot's code that prevents more than 4KB to be used by the eventlog anyway, this patch shrinks the available RW_ELOG area in the FMAP for Gru down to 4KB. This may prove prudent later if we ever resolve that limitation, so that tools can rely on the area in the FMAP being the same as the area actually used by the read-only firmware code on these boards. BRANCH=gru BUG=chrome-os-partner:55593 TEST=Booted Kevin, confirmed that eventlog got written normally. Ran a reboot loop to exhaust eventlog space, confirmed that the shrink code kicks in as expected before reaching 4KB. Change-Id: I3c55d836c72486665a19783fe98ce9e0df174b6d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 05efb82ca00703fd92d925ebf717738e37295c18 Original-Change-Id: Ia2617681f9394e953f5beb4abf419fe8d97e6d3e Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/384585 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Simon Glass <sjg@google.com> Reviewed-on: https://review.coreboot.org/16715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip: rk3399: improve sdram noc timingLin Huang
sdram noc timing will affect ddr latency, this patch improves rk3399 sdram noc timing so improve memory performance. BRANCH=gru BUG=chrome-os-partner:57248 TEST=Boot from kevin board Change-Id: I09e984490a7ad747ef8abfc6542d0e2c95ec19bc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 43dfe55d713d371e39d21312772fd353614b7642 Original-Change-Id: I393e74ecdeb72930ac38ae9bcf311e5654f65162 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/382725 Original-Reviewed-by: Sonny Rao <sonnyrao@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Tested-by: Sonny Rao <sonnyrao@chromium.org> Original-Commit-Queue: Sonny Rao <sonnyrao@chromium.org> Reviewed-on: https://review.coreboot.org/16713 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06rockchip/rk3399: lower kevin board sdram frequency to 800MHzLin Huang
We found some boards are not stable when sdram is run at 933Mhz. Before we can fix it, we need to lower the sdram frequency to 800MHz. In this patch we modify the DQS delay from 0x280 to 0x260 and extend the DQS window. BRANCH=None BUG=chrome-os-partner:56940 TEST=Booted Kevin. Change-Id: I68561c4aa4d9ab66acfa3515a42d696157aff759 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 877a7f6ad22a5bde9f9e458bcb65f133f2f001bd Original-Change-Id: I5eab6bbe96f0dae095c5353403292022e7a25421 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/382724 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16709 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06google/veyron_rialto: Add lpddr3-K4E6E304EB-2GB-1CH memory configurationJeffy Chen
Add lpddr3-K4E6E304EB-2GB-1CH memory configuration for rialto. BUG=chrome-os-partner:56759 BRANCH=none TEST=Build Change-Id: I698fe450d48b64a06232aa44ecf91d688d9dc17a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d3edecdb135939c3264ab1b831e7821d3a3e0149 Original-Change-Id: I7dae9fd822abeff5b08de0ab9262e1817ac58531 Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/380443 Original-Commit-Ready: Alexandru Stan <amstan@chromium.org> Original-Tested-by: Alexandru Stan <amstan@chromium.org> Original-Reviewed-by: Alexandru Stan <amstan@chromium.org> Original-Reviewed-by: Jonathan Dixon <joth@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16699 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-10-06rockchip/rk3399: Move big CPU cluster initialization into ramstageJulius Werner
This patch moves the big CPU cluster initialization on the RK3399 from the clock init bootblock function into ramstage. We're only really doing this to put the cluster into a sane state for the OS, we're never actually taking it out of reset ourselves... so there's no reason to do this so early. Also cleaned up the interface for rkclk_configure_cpu() a bit to make it more readable. BRANCH=None BUG=chrome-os-partner:54906 TEST=Booted Kevin. Change-Id: I568b891da0abb404760d120cef847737c1f9e3ec Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bd7aa7ec3e6d211b17ed61419f80a818cee78919 Original-Change-Id: Ic3d01a51531683b53e17addf1942441663a8ea40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/377541 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16698 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04google/gru: Ensure correct pull resistors for special-function pinsJulius Werner
Several of the special function pins we're using in firmware have a pre-assigned pull-up or pull-down on power-on reset. We don't want those to interfere with any of the signaling we're trying to do on those pins, so this patch disables them. Also do some house-cleaning to group the bootblock code better, and change the setup code for all SPI and I2C buses to first initialize the controller and then mux the pins... I assume this might be a little safer (in case the controller peripheral has some pins in a weird state before it gets fully initialized, we don't want to mux it through too early). BRANCH=None BUG=chrome-os-partner:52526 TEST=Booted Kevin. Change-Id: I4d5bd3f7657b8113d90b65d9571583142ba10a27 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f8f7fd56e945987eb0b1124b699f676bc68d0560 Original-Change-Id: I6bcf2b9a5dc686f2b6f82bd80fc9a1a245661c47 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/382532 Reviewed-on: https://review.coreboot.org/16711 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04gru: Increase SPI speed to 33MHzSimon Glass
Increase the SPI bus speed to speed up boot time. The maximum supported speed at 1.8V is 37.5MHz, and 33MHz is the next lowest convenient speed, given the clock parents. BUG=chrome-os-partner:56556 BRANCH=none TEST=boot on gru and see that things still work correctly. Total time spent on reading from SPI reduces from 185ms to 141ms. Change-Id: I71436c9e343b18360fa63d528dea5cfcfbc831e6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d7576f6e53e407af61160be142c3d589e864a8cf Original-Change-Id: I55a19f523817862e081d23469e94fd795456dd67 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381313 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16708 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-04google/gru: Init the PWM pinmux after setting up the PWMDouglas Anderson
If we setup the PWM _after_ the pinmux then there's a period of time when we're driving the PWM incorrectly. Let's setup the regulator and _then_ configure the pinmux. This fixes no known bugs, but it is more correct and probably makes the signals look better at bootup. BRANCH=None BUG=None TEST=scope Change-Id: I311c0eded873b65e0489373e87b88bcdd8e4b806 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fcf4d0ba29d82cce779c0b25ead36de4a95d97a1 Original-Change-Id: I5124f48d04a18c07bbd2d54bc08ee001c9c7e8d1 Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/381592 Original-Reviewed-by: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16700 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-04src/mainboard: Remove unnecessary semicolonElyes HAOUAS
Change-Id: Iab0c7c470a3105b5df7b6b74aebdd1329e7f93ba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16859 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2016-10-03google/gale: Remove #ifdef of Kconfig bool symbolMartin Roth
Kconfig symbols of type bool are ALWAYS defined, so this code was always being included and run, which isn't what the author wanted. Change to use IS_ENABLED(), and a regular if() instead of an #ifdef. Change-Id: I72623fa27e47980c602135f4b73f371c7f50139b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16837 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-03google/gale/Kconfig: Change wording of Kconfig optionMartin Roth
Everybody knows WHAT they're supposed to do with options, so the text "Pick this" or "Select to" are redundant. Change-Id: I327c5be755373e99ca0738593bd78e1084d4d492 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16838 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-10-01mainboard/google/reef: Update DPTF policy temp. values for CPUSumeet Pawnikar
This patch increases the CPU specific passive temp. trip point and critical temp. trip point value for DPTF policy. BUG=chrome-os-partner:57903 TEST=Built, booted on reef and verified this passive and critical temp. trip points with heavy workload. Change-Id: I2a38d01a6539c1bd478f8716c4b543ebcd1f2080 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/16766 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
2016-10-01mainboard/google/reef: unconditionally set MAINBOARD_FAMILYAaron Durbin
For all mainboard variants use the "Google_Reef" family by default which is populated in SMBIOS tables. A variant can provide their own value if needed, but "Google_Reef" can reside as the family without having to add conditions for each variant when MAINBOARD_FAMILY have to be overridden. BUG=chrome-os-partner:56677 Change-Id: Ic214eae1e6473b32f4cb442c09c34355357e1257 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16813 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-09-30google/reef: Fix default values in KconfigMartin Roth
These default values weren't being set with the default keyword so were ending up with different values. from the default generated config file before this change: CONFIG_DRIVER_TPM_I2C_BUS=0x9 CONFIG_DRIVER_TPM_I2C_ADDR=0x2 CONFIG_DRIVER_TPM_I2C_IRQ=-1 Change-Id: I19514d0c9b2a9b7e479f003a4d3384e073f4d531 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16828 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30Kconfig: Prefix hex defaults with 0xMartin Roth
Because these variables had "non-hexidecimal" defaults, they were updated by kconfig when writing defconfig files. Change-Id: Ic1a070d340708f989157ad18ddc79de7bb92d873 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16827 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30mainboard/google/stout/romstage.c: Use tabs for indentsElyes HAOUAS
Change-Id: I2402648b8c0b9dcc730ce7f099e1e4ccef3b79fc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16814 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-28google/reef: Mark touchpad and touchscreen as probed devicesDuncan Laurie
Add the 'probed' flag to the touchpad and touchscreen devices so they are probed by the kernel before being loaded, in case they do not exist or are replaced with another vendor. BUG=chrome-os-partner:57686 Change-Id: I0a61964e6874cd99fab0c21fa404a43548fc8ab5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16743 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-26mainboards,ec: provide common declaration for mainboard_ec_init()Aaron Durbin
Add a header file to provide common declarations that the mainboards can use regarding EC init. BUG=chrome-os-partner:56677 Change-Id: Iaa0b37eff4de644e969a18364713b90b7f27fa1c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16734 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins)
2016-09-26mainboards/google/reef: use chromeec's ASL lid switch implementationAaron Durbin
Defer to the lid switch implementation provided by the chromeec. BUG=chrome-os-partner:56677 Change-Id: Ida451dc29c8cf55fb88015e48a9e0bca3740f645 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16733 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-09-26soc/intel/apollolake: provide power button ACPI deviceAaron Durbin
Instead of having each mainboard provide the power button, uncondtionally provide the power button ACPI device on behalf of each mainboard. BUG=chrome-os-partner:56677 Change-Id: I94c9e0353c8d829136f0d52a356286c6bedcddd5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16731 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-21google/enguarde: Adapt to current treePatrick Georgi
Some changes were made in upstream in the meantime that broke the build: - CHROMEOS_VBNV_CMOS was renamed to VBOOT_VBNV_CMOS - recovery_move_enabled() -> vboot_recovery_mode_enabled() - chromeos.asl was replaced by an acpi generator Change-Id: Icd4ed5111cce9db79e12efb0cb7e898bba725c20 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/16683 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-21google/enguarde: Upstream Lenovo N21 ChromebookMatt DeVillier
Migrate google/enguarde (Lenovo N21 Chromebook) from Chromium tree to upstream, using google/rambi as a reference. original source: branch firmware-enguarde-5216.201.B commit cf1f57b [Enguarde: Adjust rx delay for norm.] TEST=built and booted Linux on enguarde with full functionality blobs required for working image: VGA BIOS (vgabios.bin) firmware descriptor (ifd.bin) Intel ME firmware (me.bin) MRC (mrc.elf) external reference code (refcode.elf) Change-Id: I3ccda29d1e095d8b1b36766cda913172f72233a7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/15444 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-21mainboard/google/reef: Enable cr50 TPM interruptDuncan Laurie
Enable the cr50 TPM and interrupt as GPE0_DW1_28 for use during verstage. The interrupt is left in APIC mode as the GPE is still latched when the GPIO is pulled low. BUG=chrome-os-partner:53336 Change-Id: Ib0247653bdcbaccb645cd16b81d7ec3c38f669af Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16673 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21Makefiles: update cbfs types from bare numbers to valuesMartin Roth
These values are found in util/cbfstool/cbfs.h. Change-Id: Iea4807b272c0309ac3283e5a3f5e135da6c5eb66 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16646 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20src/mainboard/getac - kontron: Add space around operatorsElyes HAOUAS
Change-Id: If3cdfdff60c92e3427f1b285e2bca92e2bb2a1cb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16640 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20gru/kevin: Decrease voltage for little cpu 1.5G to 1.15vShunqian Zheng
In kernel side we set 1.1v for 1.5G, even for coreboot RO, a higher voltage could be safer, 1.2v now seems too high. BRANCH=none BUG=chrome-os-partner:56948 TEST=bootup Change-Id: I852e0d532369aad51b12770e2efb01aacf6662ce Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 000b5c099373be2a1f83c020ba23a0e79ea78fab Original-Change-Id: Iecc620deee553c61a330353ac160aa3a36f516df Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/380896 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16583 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20Veyron: Increase bit-per-pixel to 32Daisuke Nojiri
This enhances gradation of some icons on vboot screens. BUG=chrome-os-partner:56056 BRANCH=none TEST=Booted Jerry Change-Id: Ia19d585b69e7701040209e8bf0b8a6990a166c95 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4e7a42c999673ebd89c5b30845a4a5ec93852166 Original-Change-Id: I126cb7077c834e1a8b0a625a592dce8789b5876c Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376884 Reviewed-on: https://review.coreboot.org/16581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20google/gru: Fix up PWM regulator rangesJulius Werner
We did yet another small adjustment to the PWM regulator ranges for Kevin rev6... this patch reflects that in code. Also rewrite code and descriptions to indicate that these new ranges are not just for Kevin, but also planned to be used on Gru rev2 and any future Gru derivatives (which as I understand it is the plan, right?). BRANCH=None BUG=chrome-os-partner:54888 TEST=Booted my rev5, for whatever that's worth... Change-Id: Id78501453814d0257ee86a05f6dbd6118b719309 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4e8be3f09ac16c1c9782dee634e5704e0bd6c7f9 Original-Change-Id: I723dc09b9711c7c6d2b3402d012198438309a8ff Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/379921 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16580 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20Gru: Increase bit-per-pixel to 32Daisuke Nojiri
This enhances gradation of some icons on vboot screens. BUG=chrome-os-partner:56056 BRANCH=none TEST=Booted kevin-tpm2 Change-Id: I2fc943f89386ccc6cd9293f5811182a5a51d99b0 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: bb1f0fb00d023c045305edc6c9fc655b764a4e8c Original-Change-Id: Ieb61830b9555da232936087cdcf7c61a1e55bab4 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376883 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16579 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20gru: Add watchdog reset supportJulius Werner
This patch adds support to reboot the whole board after a hardware watchdog reset, to avoid the usual TPM issues. Work 100% equivalent to Veyron. From my tests it looks like both SRAM and PMUSRAM get preserved across warm reboots. I'm putting the WATCHDOG_TOMBSTONE into PMUSRAM since that makes it easier to deal with in coreboot (PMUSRAM is currently not mapped as cached, so we don't need to worry about flushing the results back before reboot). BRANCH=None BUG=chrome-os-partner:56600 TEST='stop daisydog; cat > /dev/watchdog', press CTRL+D, wait 30 seconds. Confirm that system reboots correctly without entering recovery and we get a HW watchdog event in the eventlog. Change-Id: I317266df40bbb221910017d1a6bdec6a1660a511 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3b8f3d064ad56d181191c1e1c98a73196cb8d098 Original-Change-Id: I17c5a801bef200d7592a315a955234bca11cf7a3 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/375562 Original-Commit-Queue: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16578 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-19Revert "mainboard/google/reef: Enable cr50 TPM interrupt"Duncan Laurie
This reverts commit 24de342438208d9b843e87627f15b9a272285b0f.
2016-09-19mainboard/google/reef: Enable cr50 TPM interruptDuncan Laurie
Enable the cr50 TPM and interrupt as GPE0_DW1_28 for use during verstage. The interrupt is left in APIC mode as the GPE is still latched when the GPIO is pulled low. BUG=chrome-os-partner:53336 Change-Id: I28ade5ee3bf08fa17d8cabf16287319480f03921 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-20gru: Add USB 2.0 PHY tuning for KevinJulius Werner
This patch sets some magic number in magic undocumented registers that are rumored to make USB 2.0 signal integrity better on Kevin. I don't see any difference (unfortunately it doesn't solve the problems with long cables on my board), but I guess it doesn't hurt either way. BRANCH=None BUG=chrome-os-partner:56108,chrome-os-partner:54788 TEST=Booted Kevin with USB connected through Servo. Seems to have roughly the same failure rate as before. Change-Id: If31fb49f1ed7218b50f24e251e54c9400db72720 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c5c8f0f80ea1ebb042bcb91506a6100833e7e84 Original-Change-Id: Ifbd47bf6adb63a2ca5371c0b05c5ec27a0fe3195 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/370900 Original-Reviewed-by: Guenter Roeck <groeck@chromium.org> Original-Reviewed-by: David Schneider <dnschneid@chromium.org> Reviewed-on: https://review.coreboot.org/16265 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-19mainboard/google/reef: Configure WLAN as wake sourceVaibhav Shankar
This implements PRW method for WLAN and configures PCIe wake pin to generate SCI. BUG=chrome-os-partner:56483 TEST=Suspend the system into S3 or S0ix. System should resume through wake event from wifi. Change-Id: I9bd078c2de19ebcc652b5d981997d2a5b5f0b1b7 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16611 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-15mainboard/reef: add variant support to ASL codeAaron Durbin
There are certain board-specific options for reef variants. The big one is the DPTF settings. Rearrange the ASL files such that dsdt.asl is the main landing area. The ACPI options for Chrome EC are contained in the variant/ec.h header so the actual code #includes can just reside in dstd.asl. Since most of the mainboard specific peripherals are auto generated by the acpigen from devicetree there's no real separate need for mainboard.asl. The one thing not addressed in this CL is the notion of a variant having the Chrome EC or not (along with lid, etc). Future indirection can be provided when needed to address that requirement. BUG=chrome-os-partner:56677 Change-Id: I5c888f5fc64913dcff010c28f87e69ac5449e6b6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16604 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-15google/reef: Remove setting of GPIO_TIER1_SCI enable bitShaunak Saha
This patch removes setting of gpio_tier1_sci_en from mainboard smihandler code. Gpio_tier1_sci enable bit is set from gpio.asl now. BUG=chrome-os-partner:56483 TEST=System resumes from S3 on lidopen, powerbutton and USB wake. Also from S0iX system is resuming for WIFI wake. Change-Id: I26fd3fd9fcc83c988bcff1bda4da7a2e3da98ce6 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16566 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-14mainboards/apollolake: Set RAPL power limit PL1 value to 12W.Sumeet Pawnikar
This patch sets tuned RAPL power limit PL1 value to 12W in acpi/dptf.asl for RAPL MSR register. With PL1 as 12W for WebGL and stream case, we measured SoC power reaching upto 6W. Above 12W PL1 value, we observed that Soc power going above 6W. With PL1 as 12W, system is able to leverage full TDP capacity. BUG=chrome-os-partner:56524 TEST=Built, booted on reef and verifed the package power with heavy workload. Change-Id: I8185ce890f27e29bc138ea568af536bc274fe7b8 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/16596 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14mainboard/google/reef: Configure PERST_0 pinVaibhav Shankar
This configures PERST_0 in devicetree. For boards without PERST_0, the pin should be disabled. For boards with PERST_0 the correct GPIO needs to be assigned. BUG=chrome-os-partner:55877 Change-Id: I705009b480e02b4c9b2070bb4f82cb4d552e9a46 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16603 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 22:15:58 +0000