Age | Commit message (Collapse) | Author |
|
Remove acpi_update_thermal_table local function.
Change-Id: I4857348088feb8eaf1dd7f553c4efb29da8943cf
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36212
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We found the driver binding failure issue could be cleared with 100ms
of "reset_delay_ms". Needs further check with device vendor, anyway it
seems the IC need some time before communication after de-assertion of
reset.
BUG=b:129159369
BRANCH=firmware-hatch-12672.B
TEST=Verified driver bound successfully.
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Change-Id: Iccb33c13c9a390a2c971325c74c0c4ad4b08618e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add a new sku for dragonair
BUG=b:146504217
TEST=emerge-hatch coreboot
Change-Id: I4492d65f35d3583df1606c5f2901228b3ae14e4a
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Moving Enable/disable GPIO clock gating to soc level.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I9be77908b4e44e08a707812fd8b23b23bcb56671
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
related LTE GPIOs:
GPIO_67 - EN_PP3300
GPIO_117 - FULL_CARD_POWER_ON_OFF
GPIO_161 - PLT_RST_LTE_L
1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161
2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67
3. Power reset:
- keep GPIO_67 and GPIO_117 high and
- pull down GPIO_161 for 30ms then release it.
BUG=b:146843935
BRANCH=octopus
TEST=build and verify on the DUT with LTE
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: Ief6c993ede2bb4b3effbb05cfe22b7af4fcf7faf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
|
|
get_board_sku to smm stage.
fix Power_off section power sequence.
power_off_lte_module() should run in smm stage, add variant.c in smm stage.
also move get_board_sku() to mainboard_misc.c so that we can use it in smm stage
and ramstage.
BUG=b:144327240
BRANCH=octopus
TEST=build image and verify on the DUT with LTE DB.
Change-Id: I287ba1cb092a95b3a9dd1f960a3b84fd85b9b221
Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37649
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Declare these sku IDs:
-SKU: 1 Foob, 1-cam, no touch, no pen.
-SKU: 9 Foob360, 2-cam, touch, pen.
BUG=b:145837644
BRANCH=octopus
TEST=emerge-octopus coreboot
Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com>
Change-Id: Iffcbb3f6f945ea299ff687a383a82b88dcd11ea1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
|
|
300ns
According to SI team and vendor request, need to tune I2C bus
0 data hold time more than 300ns
BUG=b:146163044
TEST=build firmware and measure I2C bus 0 data hold time
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I75e33419cbaef746487de6ee8628d07cf08adaa9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37322
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
select SYSTEM_TYPE_CONVERTIBLE, which properly sets the
SMBIOS chassis type, and allows the OS driver to
recognize tablet mode capability
Change-Id: Ic61659e9fa6f7428afd1f018fb8cb25fe49e8747
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Adapted from Chromium commit 9522225e
[Kefka: Add memory SPD info for Hynix H9CCNNN8GTALAR-NUD]
Add current available ram_id to support Hynix H9CCNNN8GTALAR-NUD spd info.
RAM_ID: 0110 4GiB Hynix H9CCNNN8GTALAR-NUD
RAM_ID: 0111 2GiB Hynix H9CCNNN8GTALAR-NUD
Original-Change-Id: I48386ff3e5f80de94ea87359a09a5ec2577043b5
Original-Signed-off-by: Peggy Chuang <peggychuang@ami.corp-partner.google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/664517
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I0ae76c4d8313246927bbc3f71b21f3611c89a6e3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update Eve's VBT from v211 to v221, and change the backlight
control type from PWM to VESA eDP/AUX. This allows the OS to
select the proper backlight control type for the panel.
Test: Eve backlight control now functional under Windows 10
(Linux requires some pending patches to fix)
Change-Id: I8be2a719765891b3f2702c1869981009fa73ca05
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
In https://review.coreboot.org/c/coreboot/+/37459
(commit fcd8c9e99e7f70e2b9494f2fa28a08ba13126daa) which moves power/reset
pin control of FPMCU to var/board/ramstage, but does not implement it for
dratini/jinlon. So, add it in dratini/jinlon.
BUG=b:146366921
TEST=emerge-hatch coreboot
Change-Id: I1b6dbe4ba0a1242aa64346410beed4152b4f457f
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37833
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The change applies the DPTF parameters received from the thermal team.
BUG=b:146540028
TEST=build and verified by thermal team.
Change-Id: I222bac5f04ba5cdde1788c6d4ca8af80d323ca98
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
add new SKU ID below:
19 - Garg PVT (HDMI DB, Touch)
20 - Garg PVT (2A2C DB, Touch)
38 - Garg360 EVT (2A2C DB, touch, no stylues, rear camera)
BUG=b:146260545
BRANCH=octopus
TEST=emerge-octopus coreboot chromeos-bootimage
Change-Id: Ic74ce14db7060f3124c1a277eb3625ce0ff0b9f0
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
|
|
BUG=b:144809606,142094759
BRANCH=none
TEST=none
Change-Id: Iae20d2262c910044dde84f10d795f4aee3318532
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Signed-off-by: Kangheui Won <khwon@chromium.org>
Co-Author: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37925
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow MEM_STRAP_* comment style to be consistent with other boards.
BUG=b:144809606
BRANCH=hatch
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: I4945f676f307af9b8c0baa1fbcaf33113de647c3
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37592
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The baseboard GPIO table definitions are too straineous to the extend
that variants need to redefine assumptions back to NC. Invert this so
that baseboard by default assumes the safer NC and move the specific
board configurations to their respective places.
This patch handles the GPP_H3 gpio config for easier review. This
toggles the MAX amp which not all boards have. Move the pin
configuration to boards with the respective devicetree configuration
following on from the theme of commit b417786525.
BUG=b:142094759
BRANCH=none
TEST=builds
Change-Id: Iefd2223af79a13c8a42d07bc10b2772dbff6d3e5
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The baseboard GPIO table definitions are too straineous to the extend
that variants need to redefine assumptions back to NC. Invert this so
that baseboard by default assumes the safer NC and move the specific
board configurations to their respective places.
This patch handles the GPP_C15 group for easier review.
BUG=b:142094759
BRANCH=none
TEST=builds
Change-Id: I578245e24895d361d80ad016a4f18204e2b6e1ca
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The baseboard GPIO table definitions are too straineous to the extend
that variants need to redefine assumptions back to NC. Invert this so
that baseboard by default assumes the safer NC and move the specific
board configurations to their respective places.
This patch handles the GPP_A* group for easier review.
BUG=b:142094759
BRANCH=none
TEST=builds
Change-Id: I29b4323ac80b1288b2562846217c4f377714fc2c
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
To be safe for now, don't differentiate between SKUs and use lower
values to ensure board won't be browned out.
BUG=b:143246320
TEST=none
BRANCH=none
Change-Id: I041ebaa33bf2582386198290e625099ba8e2f3c9
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37651
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Generally work towards a more loose baseboard definition by moving out
some original assumptions to be board specifics. Specifically Puff does
not have the MAX98357A speaker amp and enabling the driver winds up
generating incorrect SSDT tables that confuse the kernel. Since
devicetree inherits the chip from device node in base and an override
will also inherit the chip and thus dispatch the unwanted fill_ssdt fn
call.
V.2: lean on linker to drop max98357a driver when not in dt.
BRANCH=none
BUG=b:146519004
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: I8e7fed69a4c6d9610ac100da6bae147828ebfa81
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37909
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable PCH HDA and configure dmic+ssp registers.
BRANCH=none
BUG=b:146519004
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: If9495261201ca256cdb35352338c0b3a82a50196
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
|
|
Two things here:
i. ) FSP requires that function 0 be enabled whenever any non-zero
functions hang under the same bus:device.
ii.) FSP reorders function 6 RP to be function 0 if function 0 is
indeed unused.
BUG=b:146437819
BRANCH=none
TEST=none
Change-Id: I0f499a23495e18cfcc712c7c96024433a6181a4c
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
It provides no useful information, so it might as well vanish.
Change-Id: I0df6f4639a16058486c2e2d40fe4067d65670731
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: I5791fddec8b2387df5979adbb1a0fa64c5dd23ea
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Before tuning i2c frequency,
I2C0: 479.4 KHz
I2C1: 491.4 KHz
I2C4: 476.4 KHz
After tuning i2c frequency,
I2C0: 391.8 KHz
I2C1: 396.4 KHz
I2C4: 388.8 KHz
BUG=b:146535585
BRANCH=hatch
TEST=emerge-hatch coreboot chromeos-bootimage
Change-Id: I55d095efb60eba4e860b54bb90e8e0df62d88419
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37831
Reviewed-by: Philip Chen <philipchen@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
jinlon supports LTE, so remove WWAN_RESET NC configuration
BUG=none
TEST=emerge-hatch coreboot
Change-Id: Ibc5d21f0a33952f519265a5ce2df559a79346d9e
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37837
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adding extra USB configuration since Puff has different USB ports compared to hatch
BRANCH=none
BUG=b:146437609
TEST=none
Change-Id: I42ef6b6b718274953711c84ebe90971f108501fa
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Missing bus init for RTL8111H ethernet chip hanging on bus.
V.2: Include admendments from Kangheui.
BRANCH=none
BUG=b:146437819
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: I22aba312f183ea05eeb81d326ca0c05ce340a2e8
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Seems nothing special is needed here from coreboot.
V.2: Fix typo as well in speed map.
BRANCH=none
BUG=b:143047058
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: Ief750f98677b2017af78fb0b5bc98e1492dedbe4
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Drallion only supports on board dimm. Remove the spd read from
SMBus. Since CB:37678 remove the Wilco 1.0 CML variants, weak function
is not needed.
BUG=b:140068267
TEST=boot into OS without issue
BRANCH=none
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I662f87ccf48ba470998fa28fb14c9985673cb37d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37780
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drallion supports D3 hot not D3 cold. Remove the code which used
for Wilco 1.0 CML.
BUG=b:140068267
TEST=boot into OS without any issues
BRANCH=none
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ifc83fae7ac462d3e6595742d96952c2a2607c88b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Mike Wiitala <mwiitala@google.com>
|
|
Create initial overlays and build for mushu
Signed-off-by: Bob Moragues <moragues@chromium.org>
Change-Id: I81b5bf960ead0463159ac35f4f96e3ccc8c0364e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
enable eMMC in puff/overridetree.cb
BRANCH=none
BUG=b:146455177
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: I432f437e0c9a618bbbf76d22976ea757c8fbdb83
Signed-off-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Change-Id: I4dcdcb734e20830ac97d4a826de61017afc6ee67
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I4cd9d22d2105c270a3d1e8a0be40b594c7c8b226
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37687
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If99c8ea1aa437f261e8ab3c8a164d01be8bc58e9
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I9eedae837634beb5a545d97fdf9c1810faba5138
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37271
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ACPI method TEVT is reported as unused by iASL (20190509) when ChromeEC support is not
enabled. The message is “Method Argument is never used (Arg0)” on Method (TEVT, 1, NotSerialized),
which indicates the TEVT method is empty.
The solution is to only enable the TEVT code in mainboard or SoC when an EC is used that uses
this event. The TEVT code in the EC is only enabled if the mainboard or SoC code implements TEVT.
The TEVT method will be removed from the ASL code when the EC does not support TEVT.
BUG=N/A
TEST=Tested on facebook monolith.
Change-Id: I8d2e14407ae2338e58797cdc7eb7d0cadf3cc26e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Add VBTs for all rambi variants, extracted from VGA BIOS
from stock firmware images using intelvbttool.
Test: boot several rambi variants using MrChromebox edk2/master
branch with Baytrail GOP driver and extracted VBTs.
Change-Id: I401ae5accd852fc5211092a5944fc85871b642ae
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add VBTs for jecht variants, extracted from VGA BIOS
from stock firmware images using intelvbttool, zero-padded
to 0x11ff bytes to make the Intel BMP editor happy.
Use a common VBT for all except tidus, since it differs
from the others.
Change-Id: I570bdb749ef7d49f41539074220bb16c9c100342
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This impacts boards:
hatch (&variants) and drallion.
Some variants like Puff can have up to 12 cores. coreboot should take
the min() where MAX_CPU is the upper bound.
Further to that, boards themseleves shouldn't be setting the MAX_CPUS,
the chipset should be and so do that.
BRANCH=none
BUG=b:146255011
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: I284d027886f662ebb8414ea92540916ed19bc797
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
Add VBTs for beltino variants, extracted from VGA BIOS
from stock firmware images using intelvbttool, zero-padded
to 0x11ff bytes to make the Intel BMP editor happy. Use
a common VBT for all except monroe, since it differs as
it has a built-in display (being a Chromebase vs Chromebox).
Change-Id: I82afb20a5648695c2cd568384a26839ab28be3da
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update VBT using file extracted from VGA BIOS from stock
firmware image using intelvbttool, zero-padded to 0x11ff
bytes to make the Intel BMP editor happy.
Change-Id: I9f53e80305ec8de78a3d5c930224b394b5c8618a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37732
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add VBTs for all auron variants, extracted from VGA BIOS
from stock firmware images using intelvbttool, zero-padded
to 0x11ff bytes to make the Intel BMP editor happy.
Test: boot several auron variants with libgfxinit and Tianocore
payload, ensure both internal and external displays as well as
HDMI audio function properly under Linux (4.x/5.x).
Change-Id: Ibc4eabfa5d02b4c08755cf52835b5df8c1291fea
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove the sarien_cml and arcada_cml subdirectories from the
drallion/variants directory.
BUG=b:140068267
TEST=./build_packages --board=drallion
Confirm that drallion still builds successfully.
BRANCH=none
Change-Id: I9648965ca222d4d68bf73738716ad1c93739b03f
Signed-off-by: Mike Wiitala <mwiitala@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
BRANCH=none
BUG=b:146172098
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: Ib2da3baace9255ef25c0f03390a064fd77ef9ae5
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
On nocturne, the VBT specifies that the native panel resolution
(3000x2000) is to be used by FSP/GOP init, which makes payload
and grub menus extremely difficult to read. Change the default
POST resolution specified by the VBT to 1500x1000 instead
(200% scaling) which is much more legible.
Test: build/boot nocturne with GOP init and Tianocore payload,
observe menu text is actually readable.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: I767a2b8319c7673e3460acfad534140409bf1d57
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37621
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Confirmed with Goodix team, so increase reset delay time
from 120ms to 150ms.
BUG=b:144267684
TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec
chromeos-bootimage
Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I4ff95ac89314fc031620ca28e4f6e6e26cdef3f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37544
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. SKU ID 1 and 3 for eMMC
2. SKU ID 2 and 4 for SSD
BUG=b:144815890
BRANCH=firmware-hatch-12672.B
TEST=FW_NAME="akemi" emerge-hatch coreboot
chromeos-bootimage
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I25f0c4142be024ba55f671491601d1f6ec26d68a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37498
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|