summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2016-08-08skylake/devicetree: Add PIRQ Routing programmingBarnali Sarkar
Program PIRQ Routing with correct values, as done by FSP, and also in 'soc/intel/skylake/romstage/pch.c' file. If not done, these values get overridden by "0" during PxRC -> PIRQ programming in ramstage, in 'soc/intel/skylake/lpc.c' file pch_pirq_init()function. BUG=none BRANCH=none TEST=Build and boot kunimitsu Change-Id: Ibeb9a64824a71c253e45d6a1c6088abd737cf046 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16044 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2016-08-08google/reef: Configure SDIO D1 to enable SCS Power GatingJagadish Krishnamoorthy
SDIO D1 pin needs to be configured as Native mode to enable SCS Power Gating. BUG=chrome-os-partner:54251 TEST=Verify SCS Power Gating Change-Id: Ic33b26443203217678e11d195eb965a7e628ad82 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/16062 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-06google/reef: Enable I2C2 for use in bootblockDuncan Laurie
Enable I2C bus 2 for early init so it can be used by vboot for TPM communication for verifying the memory init code. BUG=chrome-os-partner:53336 BRANCH=none TEST=build and boot on reef Change-Id: Id4940ab01d8ccf288ab0a7a9a2f19867ed464e8d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16059 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-05google/reef: Correct SD card pins configChiranjeevi Rapolu
SD CLK and CLK_FB needs to be pulled down by 20K. SD CD_N is active LOW, needs to be pulled up by 20K SD WP pin is not connected for uSD cards, enable writes by default by pulling low by 20K. BUG=chrome-os-partner:54866 BRANCH=None TEST=Test with uSD cards. Change-Id: Ia4bbd966ffb21e276dfc31a74f4ea54718900d66 Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Reviewed-on: https://review.coreboot.org/16057 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-04chromeec: Chrome EC firmware source selection for EC and PD firmwaresPaul Kocialkowski
In some cases, we don't want the Chrome EC firmwares (both EC and PD) built directly by the coreboot build system or included in images at all. This is already supported with EC_EXTERNAL_FIRMWARE but it does implement a binary (build and include) or (neither build nor include) policy. Some cases require the ability to separately control whether the EC and PD firmwares should be built and included by the coreboot build system, only included from externally-built images or not included at all. This introduces config changes implementing that behaviour, renaming options to make it clear that they are specific to the Chrome EC. Change-Id: I44ccee715419360eb7d83863f4f134fcda14a8e4 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/16033 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-04google/reef: Add GPIO changes to assert SLP_S0/Reset signalShankar, Vaibhav
PMIC/PMU: Set the iosstates for PMIC to assert the reset signal, PMU to assert SLP_S0 signal. Change-Id: If5a6a1cb8f065a8c3a6a19d9441a21d60b39e579 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Signed-off-by: Shankar, Vaibhav <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16031 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-03google/gale: Add more board ID variantsKan Yan
EVT1 has two board IDs. Use binary first mode of base3 encoding for board ID. BUG=chrome-os-partner:55320 TEST=None. BRANCH=None Change-Id: I1cac1f74207f42616111d39db5c0494b7d1a0fb2 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 2b16cc74c4c147315b7db345678bbaf536ab4a7b Original-Change-Id: I6e95c7be4a6d28a0aae38b0838bd2ab71d288ba1 Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/364623 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org> Reviewed-on: https://review.coreboot.org/16030 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-08-03google/gru: Add code to support I2C TPM for KevinJulius Werner
Coming Kevin revisions will switch back to an I2C TPM. This patch adds the required configuration options and code to support that. Since the TPM type can currently only be changed at compile time, we can no longer support older Kevins with the same image. In order to build for Kevin revisions < 5, you have to explicitly override the CONFIG_GRU_HAS_TPM2. BRANCH=None BUG=chrome-os-partner:55523 TEST=Compiled both Kevin and Gru, confirmed that bootblock and verstage binary had the appropriate code differences. Change-Id: I1b2abe0f331eb103eb0a84f773ee7521d31ae5d8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3245bff937154f0f9f39894de9c98a75631d59d9 Original-Change-Id: I81a15c9fb037a7ca2d69818e46cbb4f9a5ae1989 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/364222 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16029 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-08-03google/gru: Add support for Gru rev1Julius Werner
This patch adds support for the Gru rev1 board. This board differs from rev0 by no longer relying on the I2C backlight booster and requiring the same ODT SDRAM settings as newer Kevin boards. BRANCH=None BUG=chrome-os-partner:55087 TEST=None Change-Id: I1428760540a0aaaa0c02c6cb5b0981294ba4df33 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8de7bcc78c6c48c251c85185e238cea7812f7a28 Original-Change-Id: I3cb49bc644190f35300e6c618b2934956fa88e5b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/364624 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16028 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-02google/lars & intel/kunimitsu: Disable EC buildMartin Roth
The Chrome EC codebase no longer supports the google/lars and intel/kunimitsu boards. Disable the build in those platforms. Change-Id: Ic4f5a1a34bb19ee31632c1ad8430c30f7154f138 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15869 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-02google/reef: Add pull up 20K for LPC SERIRQKane Chen
per hw team's check and info from EDS, this pin needs to be pu 20K. Otherwise SoC may not notice interrupt request from EC over LPC because SERIRQ line is floating. BUG=chrome-os-partner:55586 BRANCH=none TEST=boot ok and Quanta factory verified the keyboard issue is gone Signed-off-by: Kane Chen <kane.chen@intel.com> Change-Id: I5b0213514ce152d4e2cecdda8786925495a0f24a Reviewed-on: https://review.coreboot.org/15951 Tested-by: build bot (Jenkins) Reviewed-by: Freddy Paul <freddy.paul@intel.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31google/reef: Update chromeos.fmd RO_SECTIONFurquan Shaikh
Update RO_SECTION to match the changes in depthcharge: https://chromium-review.googlesource.com/#/c/364261 BUG=chrome-os-partner:55713 Change-Id: I7238856cf73a62345778ea87e191a11190b7fb38 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15966 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31google/reef: Enable DPTF in mainboardShaunak Saha
This patch enables DPTF support for Google Reef platform, adds the ASL settings specific to Reef boards. BUG=chrome-os-partner:53096 TEST=Verify that the thermal zones are enumerated under /sys/class/thermal in Reef boards. Navigate to /sys/class/thermal, and verify that a thermal zone of type TCPU exists there. Change-Id: Ib43e4e9dd0d92fffc1b2c8459c552acd04ca0150 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15640 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-31google/gale: Change board ID definition.Kan Yan
Change EVT3 board id to 5. BUG=chrome-os-partner:55320 TEST=None. BRANCH=None Change-Id: I020be47e1fdbf886c7c471d7fdcace1537875b6d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 63bd6541055172765c31a9b1220a24d4e3604cdc Original-Change-Id: I21a8764ff95892430944778f4898d2f1d4c97fd7 Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/362391 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/15949 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31intel/wifi: Include conditionally in the buildKyösti Mälkki
Keep this enabled by default as most x86 platforms could have PCI-e slots equipped with one of these Intel WiFi adapters. The Kconfig entries under google boards had no function previously, the variable was never referenced. Change-Id: I728ce3fd83d51d4e5e32b848a2079c5fcee29349 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15931 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-30chromeos mainboards: remove chromeos.aslAaron Durbin
Use the ACPI generator for creating the Chrome OS gpio package. Each mainboard has its own list of Chrome OS gpios that are fed into a helper to generate the ACPI external OIPG package. Additionally, the common chromeos.asl is now conditionally included based on CONFIG_CHROMEOS. Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-30google/reef: Use GPE0_DW1_15 as wake signal for touchpadFurquan Shaikh
Due to GPE routing, raw GPIO cannot be used for indicating the wake signal for touchpad. Instead we need to reference GPE pins. BUG=chrome-os-partner:55670 Change-Id: Ie5d8473df4301c7beef0cae8fe84e71b2838261b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15947 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-28google/gru & kevin: Update DRAM configurationLin Huang
We need to enable DRAM ODT on kevin/gru board to improve the DRAM signal. Note, if the DRAM ODT is enabled and set to 120ohms, the sdram VREF need to adjust to 840mv. This patch also makes following changes: 1. For compatiblity with the old board, add the "sdram-lpddr3-hynix-4GB-666-no-odt.inc" and "sdram-lpddr3-hynix-4GB-800-no-odt.inc" files which do not enable sdram ODT. 2. Delete the 300MHz dram inc file. The 300MHz sdram config just reduced 666MHz to 300MHz based on the 666MHz config file, and it is not stable, so delete it. 3. Delete the 928MHz dram inc file, 928MHz sdram config still in debuging, delete it for now. BRANCH=none BUG=chrome-os-partner:54871 TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass Change-Id: If0248e1bc4cef2c298762080f1ca018653af0521 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 78d8a28e2d3489c99c9bba2c1c9aa76812e2e33f Original-Change-Id: I35f0685782d6fb178a95780ec77c45f565dd2194 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/358763 Original-Commit-Ready: Dan Shi <dshi@chromium.org> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15813 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-28google/reef: Write protect GPIO relative to bank offsetSusendra Selvaraj
Update the write protect GPIO reported in ACPI to GPIO_75. Also update the controller ID to "INT3452:01" which will point at the goldmont device and includes write protect GPIO. BUG=chrome-os-partner:55604 BRANCH=none TEST=verify crossystem output for wpsw_cur. Change-Id: Ibe6a013aaab18bfa2436698298177218ca934fab Signed-off-by: Susendra Selvaraj <susendra.selvaraj@intel.com> Reviewed-on: https://coreboot.intel.com/7929 Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com> Tested-by: Petrov, Andrey <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15691 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28skylake/devicetree: Add LPC EC decode rangeSubrata Banik
Define LPC decode ranges for EC communication. BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and boot kunimitsu to ensure no EC timeout error Change-Id: Idefdd79e67e89a794195c6821fee16550d1eda53 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15898 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28skylake/mainboard: Define mainboard hook in bootblockSubrata Banik
Move mainboard post console init functionality (google_chrome_ec_init & early_gpio programming) from verstage to bootblock. Add chromeos-ec support in bootblock BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and boot kunimitsu till POST code 0x34 Change-Id: I1b912985a0234d103dcf025b1a88094e639d197d Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15786 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28chromeos: Clean up elog handlingFurquan Shaikh
1. Currenty, boot reason is being added to elog only for some ARM32/ARM64 platforms. Change this so that boot reason is logged by default in elog for all devices which have CHROMEOS selected. 2. Add a new option to select ELOG_WATCHDOG_RESET for the devices that want to add details about watchdog reset in elog. This requires a special region WATCHDOG to be present in the memlayout. 3. Remove calls to elog add boot reason and watchdog reset from mainboards. BUG=chrome-os-partner:55639 Change-Id: I91ff5b158cfd2a0749e7fefc498d8659f7e6aa91 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28google/urara: Provide dummy implementations of rec/dev functionsFurquan Shaikh
This is required to enable elog support in ChromeOS by default. BUG=chrome-os-partner:55639 Change-Id: I9c97143d794de4bf220ddf67c0ca2eac2f7a326d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15896 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28qualcomm/gale: Add required files to enable elog in ramstageFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: Idbad4f8763be18002907a62be755b2fdf7e479ec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15895 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28qualcomm/storm: Add required files to enable elog in ramstageFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: Ie859ec3ff682e91a4d7d38d3c3cd6badf7385431 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15894 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28bootmode: Get rid of CONFIG_BOOTMODE_STRAPSFurquan Shaikh
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and developer mode check functions to vboot. Thus, get rid of the BOOTMODE_STRAPS option which controlled these functions under src/lib. BUG=chrome-os-partner:55639 Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15868 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28vboot: Separate vboot from chromeosFurquan Shaikh
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use of verified boot library without having to stick to CHROMEOS. BUG=chrome-os-partner:55639 Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15867 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-27mainboard/google/slippy: remove unobtainable mainboardAaron Durbin
The slippy board was a proof of concept device that has never made it out in the wild. Moreover, I don't think any of these boards exist any longer. Change-Id: I24fb08d9be35b2367e7aa64520ce5778ab861535 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15902 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-27mainboard/google/bolt: remove unobtainable mainboardAaron Durbin
The bolt board was a proof of concept device that has never made it out in the wild. Moreover, I don't think any of these boards exist any longer. Change-Id: I5ca055d448659a2b8e2eafcfc2114a6b8f8a56a4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15901 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-27soc/nvidia/tegra124: remove cache_policiy optionAaron Durbin
All mainboards (nyans) utilizing the cache_policy option has it set to DCACHE_WRITETHROUGH. This option is for setting the framebuffer's cache attribute. However, this option is reliant on an architecture-specific enumeration. Just remove the option and use DCACHE_WRITETHROUGH across the board. If someone wants to reconfigure it at a later date one can introduce a non-architecture specific option. Change-Id: I6a0848231f5e28d36ec2d56b239bed67619fe5a7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15838 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-07-26google/oak: dsi: set mipi pin driving control onMartin Roth
We set this driving control to prevent signal attenuation caused by LVDS DRV termination. When DA_LVDSTX_PWR_ON is not set, LVSH has no power and LVDS DRV termination status is unknown(floating). This creates a chance that MIPI output would be influenced. The DSI's LP signal will be half voltage attenuation. There will be no display on panel. When DA_LVDSTX_PWR_ON is set, LVSH and LVDS DRV termination are effective and termination is fixed OFF. The DSI won't be influenced. We only need to set this register once, so we set it here to prevent repeat setting in the kernel when the system goes to recovery mode. BUG=chrome-os-partner:55296 BRANCH=none TEST=build pass elm and show ui The original commit in the cros repo combined the chipset and mainboard code changes. This has been split for the push to coreboot.org Change-Id: I733bdd115950b71493856220414ac0dd75d28122 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0d25a27f300acc4b65a894110d3ee0cc9676cd12 Original-Change-Id: Ie71f9cc41924787be8539c576392034320b57a49 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/360850 Original-Commit-Ready: jitao shi <jitao.shi@mediatek.com> Original-Tested-by: jitao shi <jitao.shi@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15808 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-25google/gru: Change UART _Static_assert() condition to #ifJulius Werner
_Static_assert() gets evaluated even when the code path it's in is unreachable (e.g. inside an if (0) block). Unfortunately, Kconfigs that depend on a disabled Kconfig are always 0, meaning that CONFIG_CONSOLE_SERIAL_UART_ADDRESS on Gru cannot evaluate to UART2 when CONFIG_CONSOLE_SERIAL (which it depends on) is disabled. Switch the condition it is wrapped in to a preprocessor #if so that the _Static_assert() is not evaluated when building without serial support. BRANCH=None BUG=None TEST=Built and booted Kevin without serial Change-Id: I391325fcc4b7d64b4866a7fce4444e2f28365b7d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f5e5cf0644154eca5b347ea381df3f6b28287524 Original-Change-Id: I33d51d4ef09b218c14173d39a12795f0cef6bb40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/361581 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15810 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-25google/gale: Fix board ID and GPIO config.Kan Yan
Fix the board ID handling. Recovery switch and WP status GPIO has been reassigned in board rev3. Configure related GPIOs based on Board ID. BUG=chrome-os-partner:55320 TEST=Verified GPIO assignment for Rev.1 board. BRANCH=None Change-Id: Id8e1ba1c039f8b5b503f0da038e5cfc84b72678f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: d295ab514e31d9ebd1b77e0af9b769e64cbf567e Original-Change-Id: I6d3d5df2e9017f7845edc3cd0b2c19ad7c58a97c Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/361393 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/15809 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-25vboot: Clean up vboot codeFurquan Shaikh
1. Remove unused functions/structures. 2. Add checks for NULL return values. 3. Change prefixes to vb2 instead of vboot for functions used internally within vboot2/ 4. Get rid of vboot_handoff.h file and move the structure definition to vboot_common.h 5. Rename all functions using handoff structure to have prefix vboot_handoff_*. All the handoff functions can be run _only_ after cbmem is online. 6. Organize vboot_common.h content according to different functionalities. BUG=chrome-os-partner:55431 Change-Id: I4c07d50327d88cddbdfbb0b6f82c264e2b8620eb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15799 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25skylake: Move CHROMEOS config to SoCFurquan Shaikh
All the mainboards share the same config options for CHROMEOS. Instead of duplicating those in every mainboard, move the CHROMEOS config to SoC and make it dependent on MAINBOARD_HAS_CHROMEOS. BUG=chrome-os-partner:55431 Change-Id: Iafabb6373dfe16aaf0fe2cbc4e978952adeb403e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15822 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25apollolake: Move CHROMEOS config to SoCFurquan Shaikh
All the mainboards share the same config options for CHROMEOS. Instead of duplicating those in every mainboard, move the CHROMEOS config to SoC and make it dependent on MAINBOARD_HAS_CHROMEOS. BUG=chrome-os-partner:55431 Change-Id: I2d54ff6beac9fca7596a8f104e3c1447cada5c05 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15821 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25google/jecht: Increase RO coreboot size on flashDaisuke Nojiri
Bitmap images have been moved to CBFS from GBB. This patch adjusts the flash size accordingly for jecht. BUG=chromium:622501,chromium:628494 BRANCH=none TEST=emerge-jecht chromeos-bootimage CQ-DEPEND=CL:361380 Change-Id: I941df04b4999d35bd652e4ee1664c032cb550b29 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c859ce04d2df5f21c47a164cabbc9ef6dec61818 Original-Change-Id: I50a9ade2e90237b0a7c277bffd7b540132415f13 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/361370 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15806 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-24google/reef: Enable PS/2 keyboard driver by defaultDuncan Laurie
This device has a built-in keyboard that should be enabled by default or it will not work in firmware. This was tested to ensure that TAB (display info) and Ctrl+D (enter developer mode) are functional at the Chrome OS recovery screen. BUG=chrome-os-partner:55549 Change-Id: I60156f1fc001b88deac69e03e02e9d8277fbc38d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15782 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-22google/reef: Update gpio config for audioSathyanarayana Nujella
This changelist updates gpio config for speaker SDMODE pin. It disables speaker by default. Audio kernel is expected to enable this when audio rendering starts. Change-Id: Id33ad29e637bf1fe6b02e8a4b0fd9e220e8983e7 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15433 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-22soc/intel/apollolake: clarify meaning of LPDDR4 density meaningAaron Durbin
The 'dram density' is a misnomer because the memory initialization code treats that input parameter as a per rank density. Therefore, update the variables to further clarify how it's actually being used. BUG=chrome-os-partner:55446 Change-Id: Ie4c944f35b531812205ac0bb1c70f39ac401495e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15773 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-22mainboard/google/reef: indicate dual rank LPDDR4 skusAaron Durbin
The 16Gb devices use two ranks per channel within the DRAM module. However, the density settings are really on a per rank basis so indicate dual rank with a device density of 8Gb. BUG=chrome-os-partner:55446 Change-Id: Ib5dba6f9ed248750d68b726996c71def9b75961e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15772 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-21mainboard/google/reef: handle eMMC power signal polarity changeAaron Durbin
The EVT board uses an active high power control signal while the previous board used an active low signal. Update the tables to reflect the differences. BUG=chrome-os-partner:55470 Change-Id: I198c0e4e019fcffe2cf748d382351ac965a81077 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15763 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-21mainboard/google/reef: reverse the memory config bitsAaron Durbin
I mistakenly assumed the order of the bits matched how one would assign values as they wrote them msb .. lsb. However, the gpio lib doesn't do that. Correct the order so that values are read out correctly. BUG=chrome-os-partner:54949t Change-Id: I5304dfe2ba6f8eb073acab3377327167573ec2cc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15753 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-20google/reef: Add wake signal for trackpadFurquan Shaikh
EVT has a wake signal for track pad which is routed to GP_15. BUG=chrome-os-partner:54960 Change-Id: I9a73a3dc74e3bbed63509a3c076ec17a6559da55 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15723 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-19mainboard/google/reef: explicitly set shipping Chrome OS optionsAaron Durbin
The Chrome OS options that will be shipped on this platform were being set in the chromium repo with an external config file. Set the options in the mainboard Kconfig file so there's no discrepancy as to what will be used. Change-Id: I05f0d1245611c16f54273728519a08e6edff3429 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15733 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-18google/oak & elm: initialize touchscreen reset gpioYH Huang
In order to save power in S3, we remove reset gpio setting in kernel. We still need to initialize touchscreen ic. Do it by pulling low reset gpio for 500us and then pulling high in firmware. BRANCH=none BUG=chrome-os-partner:55170 TEST=build on elm. Change-Id: Idbe0175a1fc1fa0b05e81706194c79d52c6101f6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f40cc9a22c2551c2c9455cb8b60f36353602bca6 Original-Change-Id: If2ac815c4fd5c5ae15443348a49eb31449b724b1 Original-Signed-off-by: YH Huang <yh.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/360312 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Johnny Chuang <johnny.chuang@emc.com.tw> Reviewed-on: https://review.coreboot.org/15719 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-07-18gru: implement hw reset functionVadim Bendebury
Asserting this GPIO will send a signal to the EC to trigger a reset for the AP and the CR50. BRANCH=none BUG=chrome-os-partner:55252 TEST=the device now reboots when it needs to switch between different boot modes instead of hanging with "failed to reboot" message. Change-Id: I8d168e313b6983c96c80f7ad6d70bb84c1ec1d9c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 83a4c8ff68ab24a103f2166e948eb23624ea97f7 Original-Change-Id: Idfd20977cf3682bd8933f89e8eec53005e55864e Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/360238 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15718 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-06 00:02:38 +0000