coreboot - Some coreboot project code with my work

Age	Commit message (Expand)	Author
2013-12-23	Coding style: punctuation cleanup [1/2].	Idwer Vollering
2013-12-21	exynos5420: Configure the UART pins unconditionally	Gabe Black
2013-12-21	exynos5250: Implement support to boot with USB A-A firmware upload	Julius Werner
2013-12-21	snow: Set up the i2s0 pins during boot	Gabe Black
2013-12-21	armv7/exynos: Fix and remove memory reset workarounds	Hung-Te Lin
2013-12-21	Pit: graphics	Ronald G. Minnich
2013-12-21	kirby is dead. long live the arm pit.	Stefan Reinauer
2013-12-21	pit: update PMIC write sequence in romstage	David Hendricks
2013-12-21	snow: TPS69050 -> TPS65090	David Hendricks
2013-12-21	kirby: pit: Fix up wakeup_need_reset	Gabe Black
2013-12-21	pit: Get rid of the mostly unnecessary exynos5420.h	Gabe Black
2013-12-21	kirby: Clean some cruft from mainboard.c	Gabe Black
2013-12-21	kirby: Neutralize wakeup.c and delete the mostly unused exynos5420.h	Gabe Black
2013-12-21	Add a kirby board which is mostly a copy of pit	Gabe Black
2013-12-21	Exynos 5420: Enable dynamic CBMEM	Stefan Reinauer
2013-12-21	Exynos 5250: Enable dynamic CBMEM	Stefan Reinauer
2013-12-21	google/pit: disable SYSMMU for graphics	Ronald G. Minnich
2013-12-21	Refactor code containing aux calls	Furquan Shaikh
2013-12-21	Slippy/Falco: Fill in right values for PHSYNC and PVSYNC in transcoder flags	Furquan Shaikh
2013-12-21	Add cpu transcoder attribute to intel dp	Furquan Shaikh
2013-12-21	Calculate transcoder flags based on pipe config	Furquan Shaikh
2013-12-21	peppy: Set optimal DTLE register values	Shawn Nematbakhsh
2013-12-21	slippy/falco/peppy: Fix EC wake events in S5	Duncan Laurie
2013-12-21	falco: Force enable ASPM on PCIe Root Port 1	Duncan Laurie
2013-12-21	falco: Disable unused clocks	Duncan Laurie
2013-12-21	falco: Enable EC controlled throttling	Duncan Laurie
2013-12-21	falco: Drive GPIO59/LTE_DISABLE_L low on S3/S5	Duncan Laurie
2013-12-21	pit: Add missing elements to the edid data structure	Gabe Black
2013-12-21	pit: Bump the EC SPI bus speed up to 5 MHz	Gabe Black
2013-12-21	falco: add rtd2132 settings to device tree	Aaron Durbin
2013-12-21	Pit: set PWM to external on Parade	Ronald G. Minnich
2013-12-21	Pit: move parade writes to mainboard.c	Ronald G. Minnich
2013-12-21	peppy: Drive WLAN_DISABLE_L / BT_ON low in S3 and S5.	Shawn Nematbakhsh
2013-12-21	FUI: Fill in link_m and link_n values	Furquan Shaikh
2013-12-21	Slippy: remove unneeded code in i915io.c	Ronald G. Minnich
2013-12-21	slippy/falco/peppy: Route USB to XHCI on resume	Duncan Laurie
2013-12-21	haswell boards: fix SATA interrupt in ACPI	Duncan Laurie
2013-12-21	slippy/falco/peppy: update ACPI C-state settings	Duncan Laurie
2013-12-21	lynxpoint me: add support for mbp clear wait in finalize step	Duncan Laurie
2013-12-21	Revert "lynxpoint: Move ME lock down to ramstage"	Duncan Laurie
2013-12-21	SLIPPY: final changes for FUI	Ronald G. Minnich
2013-12-21	peppy: Duplicate SPD data for 2GB configurations.	Shawn Nematbakhsh
2013-12-21	haswell boards: Use PECI temp sensor id 0	Duncan Laurie
2013-12-21	falco: Enable RTD2132 spread spectrum at 1.0%	Duncan Laurie
2013-12-21	bolt: make the gpio interrupts edge sensitive	Aaron Durbin
2013-12-12	bolt: Initial mainboard commit	Duncan Laurie
2013-12-12	HDA: Enable Mini-HDA and fix up PCH-HDA init	Duncan Laurie
2013-12-12	slippy/falco/peppy: make GPIO interrupts be edge triggered	Duncan Laurie
2013-12-12	falco: drive WLAN_DISABLE_L low in S3 and S5	Aaron Durbin
2013-12-12	exynos5420: Setup clocks for MMC bus controller.	Hung-Te Lin