summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2015-01-04ipq806x: Add USB supportJulius Werner
This patch adds code to initialize the two DWC3 USB host controllers and their associated PHYs to the IPQ806x SoC (closely imitating the existing DWC3 implementation for Exynos5), and uses them to initialize USB on the Storm mainboard. BUG=chrome-os-partner:29375 TEST=Hack up netboot to get around missing SPI flash, load a file over TFTP. Hack a storage read into the storage attach function, dump the data and confirm that it looks right. Enable USB debugging and confirm 3.0 devices get enumerated at SuperSpeed (mostly). Original-Change-Id: Iaf7b96bef994081ca222b7de9d8e8c49751d3f1d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202157 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> (cherry picked from commit 6349e7281d5accb1247acb0537a48fa3a5e1bf97) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I749d265d45c6a807a7559bd4df2490a6eb8067af Reviewed-on: http://review.coreboot.org/8056 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04nyan_big: Update Hynix BCTs and add Kingston 2GB BCT.Tom Warren
Hynix 2GB/4GB configs have been fine-tuned. Kingston 2GB config is new, uses RAMCODE 0x6. BUG=none TEST=emerge-nyan_big coreboot-nyan_big OK. Flashed to my Big 2GB system (PVT1/SKU1) and it booted OK. BRANCH=nyan_big Original-Change-Id: I8a23a5568ef84d5befc13623f78bce664130f314 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/203305 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit e47d18d8cff50f46d0a14715b6750f7aa6d0da82) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I363db37d6a63d9f5c578e68a0149259657e1ebfd Reviewed-on: http://review.coreboot.org/8045 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04nyan: Ignore the recovery GPIO.Todd Broch
CrOS devices with Chromeos EC need only use hostevent to communicate recovery assertion to the BIOS. This CL removes wired GPIO from determining recovery as it appears under certain conditions (cold reset) the internal PU on the AP isn't strong enough and therefore the value is sometimes seen as asserted. BRANCH=none BUG=chrome-os-partner:29333 TEST=compiles & BIOS no longer responds to rec_mode GPIO during boot. Original-Change-Id: Ib220cfa5f5bfe7193d555bfd32c0444b063d00f2 Original-Signed-off-by: Todd Broch <tbroch@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202996 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit d9927bcd67b0fb069fde231314e654d727092282) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6e086cbabc884f18deb2791a0f897e332b31032f Reviewed-on: http://review.coreboot.org/8042 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04samus: Minor fixes for P1.9 boardsDuncan Laurie
- Put SSD into reset on transition to S3/S5 to prevent leakage - Fix GPIO number for wlan disable used in smihandler - Enable generic hub driver in libpayload - Fix comment in devicetree about S0ix BUG=chrome-os-partner:28502 BRANCH=None TEST=Build and boot on samus Original-Change-Id: Idce566d0f22622d36697be54ab51cacb576c5d6d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/203185 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit c0dd822babee3d766eff1735687d14e63380f702) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Idc2da99fce817aaf893f031ffbb4ac4a2ade31b0 Reviewed-on: http://review.coreboot.org/8048 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04samus: Enable DDI2 hotplugDuncan Laurie
Both DDI ports may be used on this board so it needs to be able to detect a device on either port. BUG=chrome-os-partner:28234 TEST=None (needs hardware) Original-Change-Id: I5fc5ec3fe887fb51e7bdeae43c8297580e0ba6d6 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202358 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 574bb6ac5d33c98f0214d6c738af24172164f4a1) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I57613fcea10af0fecaf0f2ad6a83ca011c650099 Reviewed-on: http://review.coreboot.org/8046 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-01-04samus: Update for board revision 1.9Duncan Laurie
- Update GPIO map - Update SPD for new memory and 4-bit table decode - Enable USB3 port 3 and 4 (shared with PCIe port 1) - Enable PCIe port 3 and disable port 1 - Enable SerialIO ACPI mode for devices - Disable S0ix for now to prevent use of C10 - Special handling for memory with broadwell CPU BUG=chrome-os-partner:28234 TEST=Boot on P1.9 Original-Change-Id: If6adcc2ea76f1af7613b715133483d7661e94dd8 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/201083 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 35835eaed3e098597e46f602fbd646cfbb899355) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Icb03808da6d92705bbc411d155c25de57c4409c6 Reviewed-on: http://review.coreboot.org/8007 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-04samus: Move SPD related information to spd directoryDuncan Laurie
Put all the SPD related information in one place including the onboard SPD sources and the board specific parsing. BUG=chrome-os-partner:28234 TEST=Build and boot on samus Original-Change-Id: If5cd826ecc9cc856008b7c29aa3cfade5ae7f685 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/201082 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit f40e447cee84ebd04ab8a57250d0f56f508d52f2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I9c10b08c3e640642e3c75696a233051bb34a2123 Reviewed-on: http://review.coreboot.org/8006 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-03mainboard/storm: setup mmu in storm mainboard_initDeepa Dinamani
enable protection of zero page access, provide for uncached device memory range, and protect against access outside of DRAM except to device registers. BUG=chrome-os-partner:28467 TEST=verified mmu.pagetable.list output: _______address___________|_physical________________|sec|_d_|_size____|_permissions____________________|_glb|_shr|_pageflags______________________| C:00000000--000FFFFF| | | | | | | | | C:00100000--3FFFFFFF| A:00:00100000--3FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:40000000--428FFFFF| A:00:40000000--428FFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc | C:42900000--43CFFFFF| A:00:42900000--43CFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered | C:43D00000--5FFFFFFF| A:00:43D00000--5FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc | Original-Change-Id: If9beb10938841aead5105d662f0aef741995d708 Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/200341 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> (cherry picked from commit 09dd137453d8c6f1b60692b01226498e22f34fb2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Conflicts: src/mainboard/google/storm/mainboard.c Change-Id: Idff7e3f0bc5903933e9f1b980f595666380696d1 Reviewed-on: http://review.coreboot.org/8010 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-03storm: enable early consoleVadim Bendebury
Include the required modules in romstage and enable early console. BUG=chrome-os-partner:27784 TEST=observe the romstage prompt in the console output: coreboot-4.0 romstage Tue May 13 17:08:58 PDT 2014 starting... Original-Change-Id: Ie3853b9afc53246e6eb997f279ccd4dbb08f748b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199673 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 6e643d3425ee226b3ebfbf329b35e7017f83d0c3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ibdc695da634356988b3e551b0a9e4be2e129ccb4 Reviewed-on: http://review.coreboot.org/7997 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-03storm/ipq8064: add dynamic CBMEM supportVadim Bendebury
Squashed the correction patch with the original to avoid confusion in coreboot.org review. All what's needed apart from configuring the feature is to provide a function which would report the top of DRAM address. BUG=chrome-os-partner:27784 TEST=manual . with all other patches applied, the image proceeds all the way to trying to download 'fallback/payload'. Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Change-Id: Ifa586964c931976df1dff354066670463f8e9ee3 Original-Reviewed-on: https://chromium-review.googlesource.com/197897 (cherry picked from commit 54fed275fe80dee66d423ddd78a071d3f063464a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> storm: initialize dynamic cbmem properly Dynamic cbmem support has been enabled on storm, but the proper initialization at romstage is missing. Proper DRAM base address definition is also necessary so that CBMEM is placed in the correct address range (presently at the top of DRAM). BUG=chrome-os-partner:27784 TEST=build boot coreboot on ap148, observe the following in the console output: Wrote coreboot table at: 5fffd000, 0xe8 bytes, checksum 44a5 coreboot table: 256 bytes. CBMEM ROOT 0. 5ffff000 00001000 COREBOOT 1. 5fffd000 00002000 Original-Change-Id: I74ccd252ddfdeaa0a5bcc929be72be174f310730 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199674 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit e2aeb2f4e7f3959d5f5336f42a29909134a7ddb7) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I45f7016dd510fe0e924b63eb85da607c1652af74 Reviewed-on: http://review.coreboot.org/7996 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-03blaze: change ramcode 1000/1001/1010 to use 792MHz bctNeil Chen
This change updates the cfg file for Hynix/Micron/Samsung 4GB, 792MHz DRAM based on the data generated by t124_emc_reg_tool. BUG=none BRANCH=blaze TEST=emerged coreboot, booted successfully into kernel. Original-Change-Id: I7621e60d8dcc568e0bb400a6c96b7f8909a15aa6 Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/202059 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit 04e74d2fb0fefa6a1786225638380c8831bd9481) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6615e34a17bb372eda9dd0844ecddbcde902ad7c Reviewed-on: http://review.coreboot.org/8008 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2015-01-03storm: ipq8064: enable CBFS SPI wrapperVadim Bendebury
This change forces storm platform to use the common CBFS SPI wrapper, which makes the SOC specific CBFS code unnecessary and requires including SPI controller support in all coreboot stages. BUG=chrome-os-partner:27784 TEST=manual . with this change and the rest of the patches coreboot on AP148 comes up all the way to attempting to boot the payload (reading earlier stages from the SPI flash along the way). Original-Change-Id: Ib468096f8e844deca11909293d90fc327aa99787 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197932 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 794418a132b5be5a2c049f28202da3cec7ce478d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I751c51c91f29da4f54fcfe05e7b9a2e8f956c4f2 Reviewed-on: http://review.coreboot.org/7994 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-31samus: Combine mainboard patches to build soc/intel/broadwellDuncan Laurie
Combine four patches dependencies. These will not build individually, so combine them for coreboot.org upstream. samus: Move SPD handling to separate file The code to find the SPD data for the mainboard based on GPIOs is moved from romstage.c into spd.c. It relies on the updated pei_data structure from broadwell instead of the haswell interface. BUG=chrome-os-partner:28234 TEST=Build and boot on samus CQ-DEPEND=CL:199921 CQ-DEPEND=CL:199922 CQ-DEPEND=CL:199923 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: I5bd56f81884dae117b35a1ffa5fb6e804fd3cb9c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199920 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 0bd2de4ba5eb8ba5e9d43f8e82ce9ff7587eab62) Signed-off-by: Marc Jones <marc.jones@se-eng.com> samus: Move PEI data structure init to separate file This needs to be executed in both romstage and ramstage for the different PEI binary stages. It uses the broadwell interface now instead of haswell. BUG=chrome-os-partner:28234 TEST=Build and boot on samus CQ-DEPEND=CL:199920 CQ-DEPEND=CL:199922 CQ-DEPEND=CL:199923 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: Ida05bd17b9e54f08ed0e2767361c9301a2e97709 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199921 (cherry picked from commit 89f98a27ea561ec63e716b1f6446d92822a6a5de) Signed-off-by: Marc Jones <marc.jones@se-eng.com> samus: Convert mainboard to use soc/intel/broadwell Switch from the haswell cpu/northbridge/southbridge interface to the soc/intel/broadwell interface. - Use new headers where appropriate - Remove code that is now done by the SOC generic code - Update GPIO map to drop LP specific handling - Update INT15 handlers, drop all but the boot display hook BUG=chrome-os-partner:28234 TEST=Build and boot on samus CQ-DEPEND=CL:199920 CQ-DEPEND=CL:199921 CQ-DEPEND=CL:199923 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: I56f3543612e89e2cdb4256b1bcd4279f5546b918 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199922 (cherry picked from commit 715dbb06e9f79d1ec3647330311c45aa29362375) Signed-off-by: Marc Jones <marc.jones@se-eng.com> samus: Add some code to print basic info from SPD The handling of LPDDR is a bit messy in Intel platforms. There is no traditional SPD so instead one is created by hand from the provided datasheets. These have varying (and sometimes unexpected) geometry and it can be important during bringup to know what configuration is being passed to the memory training code. This could in theory be put in a more generic location, but for now this is the only board with LPDDR3 where I have found it valuable. BUG=chrome-os-partner:28234 TEST=Build and boot on samus, look for SPD details on the console. CQ-DEPEND=CL:199920 CQ-DEPEND=CL:199921 CQ-DEPEND=CL:199922 CQ-DEPEND=CL:199943 CQ-DEPEND=CL:*163751 Original-Change-Id: Ibce0187ceb77d37552ffa1b4a5935061d7019259 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/199923 (cherry picked from commit 3f36348dd7abc67048407f181065f1a99b3d0dab) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1d19dffbd0b2e838d1946670a0bee9f8e121869d Reviewed-on: http://review.coreboot.org/7943 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-31ipq8064/storm: UART enable and various fixesVadim Bendebury
The original patch from chromium was a bit of a mishmash. Between that, rebasing and using the coreboot.org UART infrastructure, the patch has changed a bit from the original. It seems reasonable to keep these changes together. - build in the ipq UART and turn on bootblock console - sets LPAE and ROM header address - adds cpd.c to storm The original commit: ipq8064: make UART driver work in bootblock This patch it the last one in the chain adapting the ipq9064 UART driver for use in coreboot. A new config option (CONSOLE_SERIAL_IPQ806X) is being introduced to control inclusion of the driver. The previously introduced uart_wrapper.c is now included in the build to provide the console driver structure used by ramstage. Necessary configuration options are added to allow use of UART in the bootblock. BUG=chrome-os-partner:27784 TEST=with this change the coreboot image on AP148 prints a banner on start up: coreboot-4.0 Wed Apr 23 16:24:51 PDT 2014 starting... Original-Change-Id: I129ee30ba17a5061b30cfee56c135df31eba98b5 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196663 (cherry picked from commit 42ca8994361327c24e7a611505b21534dd231f30) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1175e74ed639cdc27a1a677fba65de2dd2b13a91 Reviewed-on: http://review.coreboot.org/7875 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-31nyan*: Set GEN2 I2C pads to open-drain modeKen Chang
The VDDIO to GEN2 I2C SCL/SDA pins is 1.8V and the external pull-up voltage is 3.3V (the external 3.3V > I/O 1.8V) thus the pinmux E_OD bit of these two pins needs to be set to ensure GEN2 I2C pads work fine on 3.3V. BRANCH=nyan BUG=none TEST=observed voltage drop from 3.3V to 2.36V on gen2 i2c on blaze w/o this change. the waveform looks good on both scl/sda pins w/ this change. Original-Change-Id: I1b97f0c9c7580d1e532c3bdf7ac8690241ee7ee3 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/200996 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 2db39166ec525e56a19746f38a867305a2687365) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I0c84eade89311baf0a6f180cb5cc9e2145f6b7ea Reviewed-on: http://review.coreboot.org/7952 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-31rambi: Add _PRW for LID0 ACPI DeviceShawn Nematbakhsh
The kernel will not track wakeup events for devices unless they have a defined _PRW. There is no EC output of the lid signal coming to a GPIO and instead it pulses PCH_WAKE#. BUG=chrome-os-partner:27631 TEST=Manual on Rambi. - Run lidclose + lidopen on EC console, verify that wakeup_count increments. - Run lidclose + lidopen in rapid succession, verify that suspend request is aborted. BRANCH=Rambi. Original-Change-Id: I8d4c58a7bb37d7e474ec094fe96e46e1bfd980de Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/200289 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> (cherry picked from commit 08c6b42f1ed1af7fff6217e6b71469edd7ff4b2e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Iee813ed6f39cd3d5e0a2bdd395c740f82a1cf01a Reviewed-on: http://review.coreboot.org/7945 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-31rambi: Unconditionally clear the EC recovery requestSheng-Liang Song
Implement Rambi clear_recovery_mode_switch() BUG=chromium:279607 BRANCH=TOT TEST=Verified recovery sequences on Rambi. Original-Change-Id: I481329d0f49584ad0314bd982b80bbc86112c2c0 Original-Signed-off-by: Sheng-Liang Song <ssl@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197781 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> Original-Commit-Queue: Sheng-liang Song <ssl@google.com> Original-Tested-by: Sheng-liang Song <ssl@google.com> (cherry picked from commit 77e60a039f3d8328694a743e7cd15cce71b02f5d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I837151551b8aa68cf86b6fa1dd39b7b673d6a4d9 Reviewed-on: http://review.coreboot.org/7896 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2014-12-30Rambi: Set SOC_DISP_ON as GPIO to avoid LCD_VCC glitchKein Yuan
To avoid LCD_VCC glitch on cold reset, set SOC_DISP_ON as GPIO output high. After gfx initialize is done, set it to native function 2. BUG=chrome-os-partner:25159 BRANCH=firmware-rambi-5216.B TEST=Tested on Rambi and squawks, no LCD_VCC glitch anymore. Original-Change-Id: If16af498e910a8da1d77a9a66456eb767286a61a Original-Change-Id: Icf62588fa0338f89fafb3fe9246c26f16bcdaa60 Original-Signed-off-by: Kein Yuan <kein.yuan@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197985 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Original-Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit 6f7d621678f22133c9825565fedc77d19198b08c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ibaf547b8d1c27811a1bec9fa3254d559c505a361 Reviewed-on: http://review.coreboot.org/7893 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-30nyan_blaze: Enable USB port2Neil Chen
There is a hub in USB port2 downstream. BUG=chrome-os-partner:28964 BRANCH=None TEST=emerge-nyan_blaze coreboot depthcharge chromeos-bootimage and verify usb port2 is workable Original-Change-Id: I0e698970729911f401f89594232f9d49e4da93cc Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/200417 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 9316acfe8791585f778eecead95943e6422ca419) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I76e4331ea6e803bfbbddefab449310421c0c1d9c Reviewed-on: http://review.coreboot.org/7949 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-30nyan*: Log boot reason in eventlogDavid Hendricks
BUG=none BRANCH=nyan TEST=built and booted on Big under various modes, verified that expected boot mode showed up using "mosys eventlog list" Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I8d98487a2cb910874c8d741008ae59a6c89102e7 Original-Reviewed-on: https://chromium-review.googlesource.com/199691 Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 9f4b2574c1af23dcdc01706e9a118441f46a0f97) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ibbf264a1e05323dfddb7cdb270ee6f2d49e83eff Reviewed-on: http://review.coreboot.org/7946 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-30ipq8064: prepare uart driver for use in corebootVadim Bendebury
The IO accessor wrappers are used to allow integer register addresses. A structure defining UART interface configuration is declared and defined. A few long lines are wrapped. Interface functions are renamed to match the wrapper API. cdp.c is edited to fit into coreboot compilation environment, and the only function required by the UART driver if exposed, the rest are compiled out for now. BUG=chrome-os-partner:27784 TEST=after all patches are applied the serial console on AP148 becomes operational. Original-Change-Id: I80c824d085036c0f90c52aad77843e87976dbe49 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196662 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 5e9af53a069cd048334a3a28f0a4ce9df7c96992) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I80c824d085036c0f90c52aad77843e87976dbe49 Reviewed-on: http://review.coreboot.org/7874 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-26blaze: change ramcode 0001/0010 to use 792MHz bctJerry Wang
This change updates the cfg file for Micron/Samsung 2GB, 792MHz DRAM based on the data generated by t124_emc_reg_tool. BUG=none BRANCH=blaze TEST=emerged coreboot, booted successfully into kernel. Original-Change-Id: I840cdd967c3b38479946a497a91da89bef5a98ad Original-Signed-off-by: Jerry Wang <jerryw@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/199296 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> (cherry picked from commit cb70674c6551c8c36d2fd2d220e0f677ed2c6b24) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I11222bc1453a76cc27c2be169be5d3481ed7cfe7 Reviewed-on: http://review.coreboot.org/7902 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-26nyan*: Detect watchdog resets and reset the whole machine.Gabe Black
When a watchdog reset happens, the SOC will reset but other parts of the system might not. That puts the machine in a funny state and may prevent it from booting properly. BUG=chrome-os-partner:28559 TEST=Built for nyan, nyan_big and nyan_blaze. Booted normally, through EC reset, software reset ("reboot" command from the terminal), and through watch dog reset. Verified that the new code only triggered during the watchdog reset and that the system rebooted and was able to boot without going into recovery mode unnecessarily. BRANCH=nyan Change-Id: Id92411c928344547fcd97e45063e4aff52d2e9e8 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/198582 Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit b298be41c0959c58aeb8be5bf15141549da2504c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7900 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-26blaze: change ramcode 0000 to use 792MHz bctKen Chang
The original sdram-hynix-2GB-792.inc was just copied from nyan bct file. This change updates the cfg file for Hynix 2GB, 792MHz DRAM based on the data generated by t124_emc_reg_tool. BUG=none BRANCH=blaze TEST=emerged coreboot, booted successfully into kernel. Original-Change-Id: I9534b4df6d35193179de124309df12ed830098a0 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197660 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 797dabe54f2679bb5717961dda1947df453eb0f1) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie67bedb29d5d9c3a3b58d949ddf9600716c385ec Reviewed-on: http://review.coreboot.org/7898 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-26nyan*: I2C: Implement bus clear when 'ARB_LOST' error occursTom Warren
This is a fix for the 'Lost arb' we're seeing on Nyan* during reboot stress testing. It occurs when we are slamming the default PMIC registers with pmic_write_reg(). Currently, I've only captured this a few times, and the bus clear seemed to work, as the PMIC writes continued (where they'd hang the system before bus clear) for a couple of regs, then it hangs hard, no messages, no 2nd lost arb, etc. So I've added code to the PMIC write function that will reset the SoC if any I2C error occurs. That seems to recover OK, i.e. on the next reboot the PMIC writes all go thru, boot is OK, kernel loads, etc. BUG=chrome-os-partner:28323 BRANCH=nyan TEST=Tested on nyan. Built for nyan and nyan_big. Original-Change-Id: I1ac5e3023ae22c015105b7f0fb7849663b4aa982 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197732 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> (cherry picked from commit f445127e2d9e223a5ef9117008a7ac7631a7980c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I584d55b99d65f1e278961db6bdde1845cb01f3bc Reviewed-on: http://review.coreboot.org/7897 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-19nyan*: Clear VDDIO_SDMMC3 to reset SD card reader.Hung-Te Lin
When across warm reset, if VDD_3V3_SD_CARD gets power-cycled but VDDIO_SDMMC3 does not, we will get ~1.5V leakage on VDD. To fix that, we reset VDDIO_SDMMC3 to 0 along with VDD_3V3_SD_CARD in Coreboot. Payloads must turn on VDDIO_SDMMC3 explicitly before accessing SD card. Note the warnings of "VDD_SDMMC must set early" in comment seems only happens on U-Boot and can be removed. BUG=chrome-os-partner:27053 BRNACH=nyan TEST=Ctrl-U to boot from SD card, login and type "reboot", then Ctrl-U to boot again. Without this patch, system will fail in loading kernel. Original-Change-Id: I7f85995317d18587d514ea3afcff3bfea0a33e93 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196961 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Andrew Bresticker <abrestic@chromium.org> (cherry picked from commit 2cfdb78d9dc229a3c06f19bbe137d59d923908a4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie7d814e0424478c35a56fbc959437ee6a555684a Reviewed-on: http://review.coreboot.org/7866 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-19nyan*: Disable SD card reader power gpio.Hung-Te Lin
When warm booting, SD card reader on Tegra 124 needs to be reset by setting power GPIO to zero. Since we don't really access SD card in Coreboot, set it to zero and let payloads enable power when they need to access SD cards. CQ-DEPEND=CL:196783 BRANCH=nyan BUG=chrome-os-partner:27053 TEST=emerge-nyan coreboot depthcharge chromeos-bootimage # With related changes in depthcharge, boots SD card successfully. Original-Change-Id: I2d368eb9480c978e9e343648b58a729028c94622 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196774 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Tested-by: Andrew Bresticker <abrestic@chromium.org> (cherry picked from commit 62bb7d04dff1a87474a8557f144b24e6b7d006ae) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3429535d0d032f9db89d8e70a525a6281102537a Reviewed-on: http://review.coreboot.org/7865 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-19nyan*: Add fast link training functionsJimmy Zhang
Some panels (including those on Big DVT) cannot work fine without link training before sending the video signals, especially multi-lane Full HD panels. We need to use the fast link training functions from kernel to support them. BRANCH=Nyan BUG=chrome-os-partner:28128, chrome-os-partner:28129 TEST=tested on nyan, nyan_big dvt. Vince verified on Full HD panels. Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Change-Id: Ifde8daf0ebdc6fb407610d3563f3311b2a72dbc4 Original-Reviewed-on: https://chromium-review.googlesource.com/196162 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 992132ff3431fc7abba10cc8e910e36d4f3a3f7a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I5ed091ae7a872fd674ab21f9f80267052fcd24b1 Reviewed-on: http://review.coreboot.org/7864 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17rambi: align gpu pipea settings with the VBIOSAaron Durbin
In the normal mode case these settings aren't overwritten by the VBIOS because the VBIOS does not run. Therefore, the settings need to align with what the VBIOS programs so that there is a consistent panel power sequencing. BUG=chrome-os-partner:28267 BRANCH=baytrail TEST=Built and booted. Noted settings set by firmware for both dev and normal mode match. Original-Change-Id: Iccf65e2a6bce6859fd7cb0f466d4b44d654523ce Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196822 Original-Reviewed-by: Marc Jones <marc.jones@se-eng.com> (cherry picked from commit 12999018f2b08df0c3b9cdac1f16e9c4517ea803) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Idf1a701ffcb1c990cec2ca1ccca24cc0d26fabbf Reviewed-on: http://review.coreboot.org/7846 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-17nyan*: cbmem: Move the call to cbmemc_reinit.Gabe Black
The call was after the call to vboot_verify_firmware and so would only be called when falling back to RO, aka recovery mode. This change moves it to before vboot_verify_firmware so we'll always have the cbmem console. BUG=None TEST=Built and booted on nyan and verified that the cbmem console was the same as the serial output. Built for big and blaze. BRANCH=nyan Original-Change-Id: I02d01110659689b08d32777dae384ac3e01b3b9f Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/196158 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit d3e4a778e4a0f5ade7d633d8ce7e72ef06c44086) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id14a19a78bcb21cb0c4030c2e41195e491f690d5 Reviewed-on: http://review.coreboot.org/7777 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17tegra124: modify panel init sequenceKen Chang
Panel datasheet defines some delay between PWM signal out and backlight enable. This change fixes the current sequence and makes the delays adjustable by dt setting. BRANCH=none BUG=chrome-os-partner:28008 TEST=Verified on Big DVT and Nyan/Norrin panels. Panel works fine with dev mode, and the measurement of power on sequence meets panel requirements. Original-Change-Id: If6015bbb6015a3b203d425f5e90f676ad786b5e8 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/196183 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 2bbcaa7281222ffc0b4026e8b1eb4c210a8e308a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id6424f66eb8dc6adeb70eaa33df742f4e57983c3 Reviewed-on: http://review.coreboot.org/7776 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-17nyan*: enable CLAMP_INPUTSKen Chang
Enable pinmux clamp function to avoid pinmux conflict. For pins which are configured to tristate enabled, the inputs to the controller will be clamped to zero. This can be used to avoid pinmux conflicts since the tristate bit is set to 1 in the power-on-reset pinmux setting. With pinmux clamp enabled, we need to configure all the input pins to tristate disabled. BUG=chrome-os-partner:27091 BRANCH=None TEST=built and booted successfully, display worked fine. Original-Change-Id: Id79a717f2025c812908c7152d439351208aee8d2 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194060 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit c95d6fe79810612cfad721667657cdcb87068d23) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1b23df8b90f83ea2b2c08c4364d90fe71533a5a0 Reviewed-on: http://review.coreboot.org/7775 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-17nyan*: Add eventlog supportDavid Hendricks
This enables event logging support for Nyan platforms. Right now this doesn't do a whole lot. We can add events in later CLs. BUG=none BRANCH=none TEST=built and booted for Nyan Rev. 1, eventlog gets initialized if necessary and can be printed by "mosys eventlog list" Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Id77a78f55c8bff9ef0ffc7109c8b03c270e8b6b1 Original-Reviewed-on: https://chromium-review.googlesource.com/191200 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 1bb1a00863a63e53379b02f2b466d4d8ae3cef50) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3a5d896d97dfc66ec37114bd3bac3f34e1c22bf7 Reviewed-on: http://review.coreboot.org/7774 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-16blaze: Change samsung RAMCODE to samsung-2GB-204/samsung-4GB-204Neil Chen
hynix-2GB-204MHz/hynix-4GB-204MHz are not workable with Samsung RAMCODE. To replace them by samsung-2GB-204/samsung-4GB-204 for bring up purpose. BRANCH=none BUG=chrome-os-partner:27682 TEST=emerge-nyan_blaze coreboot builds OK; flash to blaze board and boot to kernel successfully with all the RAMCODE Original-Change-Id: I7c2a96e84e6988dd739a9621ff93edc01703306a Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/195396 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Katie Roberts-Hoffman <katierh@chromium.org> (cherry picked from commit dc028c408be58f036fe125abc2e49e2c0cde0aa8) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ieeb0250e42fb48c6089bc8dc95550c9b1694d7f8 Reviewed-on: http://review.coreboot.org/7772 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-16i2c: Replace the i2c API.Gabe Black
The new API is in use in depthcharge and is based around the "i2c_transfer" function instead of i2c_read and i2c_write. The new function takes an array of i2c_seg structures which represent each portion of the transfer after a start bit and before the stop bit. If there's more than one segment, they're seperated by repeated starts. Some wrapper functions have also been added which make certain common operations easy. These include reading or writing a byte from a register or reading or writing a blob of raw data. The i2c device drivers generally use these wrappers but can call the i2c_transfer function directly if the need something different. The tegra i2c driver was very similar to the one in depthcharge and was simple to convert. The Exynos 5250 and 5420 drivers were ported from depthcharge and replace the ones in coreboot. The Exynos 5420 driver was ported from the high speed portion of the one in coreboot and was straightforward to port back. The low speed portion and the Exynos 5250 drivers had been transplanted from U-Boot and were replaced with the depthcharge implementation. BUG=None TEST=Built and booted on nyan with and without EFS. Built and booted on, pit and daisy. BRANCH=None Original-Change-Id: I1e98c3fa2560be25444ab3d0394bb214b9d56e93 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193561 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 00c423fb2c06c69d580ee3ec0a3892ebf164a5fe) This cherry-pick required additional changes to the following: src/cpu/allwinner/a10/twi.c src/drivers/xpowers/axp209/axp209.c Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I691959c66308eeeec219b1bec463b8b365a246d7 Reviewed-on: http://review.coreboot.org/7751 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-15tegra124: Setup clock PLLD by approximating display panel pixel clock.Hung-Te Lin
PLLD, the clock for display, was previously hard-coded to 306MHz. To support more different panels, we should calcualte PLLD by panel pixel clock configuration. Note existing pixel clock configurations for nyan* boards won't work (they used to rely on hard-coded approximated values) so the device trees are also modified. BRANCH=none BUG=chrome-os-partner:25933 TEST=emerge-nyan_big coreboot chromeos-bootimage See panel correctly initialized and got DEV screen. Original-Change-Id: I8d592f0cc044e7c4e4803c45955642e791210ad3 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193565 (cherry picked from commit 4f9b793633ebb2d104b0544e3b72fa0d105951c4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib2cabbad60af010e872505e888eab485ba8c2916 Reviewed-on: http://review.coreboot.org/7762 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan*: pinmux: fix PWM1/2 conflictsTom Warren
GPIO_PU4/PH1 and _PU5/PH2 were set to use the same PWM1/2 SFIO. Even though no problems were caused by this, correct it here so we get a conflict-free pinmux map. BUG=chrome-os-partner:27091 BRANCH=none TEST=Built and booted on Nyan, ran TegraShell "pinmux check" and saw no conflicts. Original-Change-Id: Ib16341aa0c92b9a078d7f3254d4151e9592f40b0 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194582 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit e06a5a62d381f803dd6574787795a51ce1f1fe74) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I055359dc80c0c878ba5f5faac17884a5506a826c Reviewed-on: http://review.coreboot.org/7759 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15tegra124: set safe values for href_to_sync and vref_to_syncJimmy Zhang
href_to_sync and vref_to_sync are chip specific settings. Currently they are set to 1/2 of hfront_porch and vfront_porch respectively. However, to support EDID (CL192730), per David Ung, the safe values for both are 1 (the same settings as in kernel). BUG=none BRANCH=none TEST=built and booted on nyan. Original-Change-Id: Ifb8898e720a160ba044e2b526de2a4d17bc63672 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193504 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit a7128a533ba6083ddfeeca3ba0828962cc2c8ab6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6954a5b49c798ebdffb20e3ebc9099cd17591b79 Reviewed-on: http://review.coreboot.org/7758 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan: Enable the cbmem console on nyan and allocate space for it in SRAM.Gabe Black
This change takes about 8K of space away from the cbfs cache and repurposes it for the cbmem console buffer. This is a little more than twice the space we currently need for the bootblock and ROM stage to give us some room to grow and for extra debug output if needed. BUG=None TEST=Built and booted on nyan. Checked the cbmem output. BRANCH=None Original-Change-Id: I6543bf5efddcf2377528a273f846b8090cd8be55 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193169 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 32e9ea6f9ecaa9b5441c91acab96514222f3af2c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia9e5cc7a4b561bd89137cdc8b594584b272d9fab Reviewed-on: http://review.coreboot.org/7757 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyans: prepare for vboot verification of ramstageAaron Durbin
Set the appropriate config options and make the appropriate calls to perform vboot verification. The flashmap offset as well as the TPM information needs to be properly set. Lastly, call into vboot_verify_firmware() to perform the vboot verification when it is enabled. BUG=chrome-os-partner:27094 BRANCH=None TEST=Built vboot verification on nyan. Original-Change-Id: I6113badd6143008ceb2b80f0ec0832e1addd03d7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/190928 Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 8c6c48c7823738bf9b029a467b077d2ee20d04e5) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2a442b1b0fff55e737df2e96740c05c1726502d5 Reviewed-on: http://review.coreboot.org/7743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15blaze: Change RAMCODE 0010 to hynix-2GB-792MHzNeil Chen
RAM module for RAMCODE 0010 (K4B4G1646Q) does not work with hynix-2GB-204MHz configuration. We need to replace it by hynix-2GB-792MHz. Also updated hynix-2GB-792MHz configuration from Nyan board folder. This commit is only for bring up stage. Once finish dram stress test, will update it again. BRANCH=none BUG=chrome-os-partner:27682 TEST=emerge-nyan_blaze coreboot builds OK; flash to blaze board and boot to kernel successfully Original-Change-Id: Idfc503c944ac6120c92a4cf329f3fbe63b2c2a1c Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193737 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 91f21aa0cf9251b825e42d946d8cd41849c57447) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6293fa638c5b2577e502ba34a3cc6e6d5b7f2fdb Reviewed-on: http://review.coreboot.org/7742 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan*: Fix unexpected symbol (CR) when converting DOS-formatted BCT config.Neil Chen
There are some unexpected symbol at the end of each line in the generated .inc file when the config file is in DOS format (CR+LF). Modify cfg2inc to support DOS format cfg file by removing carriage return symbols from the end of each line. BUG=chrome-os-partner:27614 TEST=sudo cfg2inc.sh XXX.cfg # make a expected inc file BRANCH=nyan Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Change-Id: I68b0f4b3805fcb5a6b633653c95afbafcb880a93 Original-Reviewed-on: https://chromium-review.googlesource.com/192697 Original-Tested-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Neil Chen <neilc@nvidia.com> (cherry picked from commit 38e90ab0d9110d3ede39c70e27961b833813a7d4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I30737600fa8ac12a45ad0fbc6086a624993794e7 Reviewed-on: http://review.coreboot.org/7741 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-15blaze: set 8 default BCT as hynix-2GB-204MHzNeil Chen
To set the 8 different BCT as hynix-2GB-204 first. Once the corresponding BCT release from AE, change it. BRANCH=none BUG=None TEST=emerge-nyan_blaze coreboot builds OK Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Change-Id: Ia42a4a5b85c561421ab8ae9aaf21c46a3c0a3513 Original-Reviewed-on: https://chromium-review.googlesource.com/191682 Original-Tested-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-by: Artiste Hsu <chhsu@nvidia.com> Original-Reviewed-by: Katie Roberts-Hoffman <katierh@chromium.org> Original-Commit-Queue: Neil Chen <neilc@nvidia.com> (cherry picked from commit 27792db4a90ae00e066bb0b88968cf5f187edb1d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia648c8bdbbbc82bbc8508bead6ab24d8d0aa3fb2 Reviewed-on: http://review.coreboot.org/7740 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan*: Reduce the EC SPI bus frequency to 3 MHz.Gabe Black
The EC doesn't seem to be able to handle its bus running at 4 MHz or higher. To avoid it not being able to keep up, we reduce the frequency of that bus on all nyan derivatives to 3 MHz. Because PLLP can't be divided that low, we switch the clock source to CLKM. BUG=chrome-os-partner:22849 TEST=Built and booted on nyan. BRANCH=None Original-Change-Id: I8f31b41098d64634427b4686f5333012f643fada Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193349 Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit c215c50a5bb982b0e671c951e2fe8df06db85db2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia60513d118aed8881927e9d52f170e27655ea8e7 Reviewed-on: http://review.coreboot.org/7739 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-09spi: Factor EC protocol details out of the SPI drivers.Gabe Black
The SPI drivers for tegra and exynos5420 have code in them which waits for a frame header and leaves filler data out. The SPI driver shouldn't have support for frame headers directly. If a device uses them, it should support them itself. That makes the SPI drivers simpler and easier to write. When moving the frame handling logic into the EC support code, EC communication continued to work on tegra but no longer worked on exynos5420. That suggested the SPI driver on the 5420 wasn't working correctly, so I replaced that with the implementation in depthcharge. Unfortunately that implementation doesn't support waiting for a frame header for the EC, so these changes are combined into one. BUG=None TEST=Built and booted on pit. Built and booted on nyan. In both cases, verified that there were no error messages from the SPI drivers or the EC code. BRANCH=None Original-Change-Id: I62a68820c632f154acece94f54276ddcd1442c09 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/191192 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 4fcfed280ad70f14a013d5353aa0bee0af540630) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id8824523abc7afcbc214845901628833e135d142 Reviewed-on: http://review.coreboot.org/7706 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-12-07mainboard/google/samus: Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: Id3b16872f62660393d938d6f95977a4e3842d0d1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7690 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-06Remove IRQ_SLOT_COUNT on all boards without PIRQ table.Vladimir Serbinenko
This config is used only to generate PIRQ table. If no such table is supplied there is no need for config. Change-Id: I537d440f53019a6bf7f190446074e75e7420545a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7566 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-01Mark non-executable files non-executablePatrick Georgi
No need to mark Makefiles, C files or devicetrees executable. Change-Id: Ide3a0efc5b14f2cbd7e2a65c541b52491575bb78 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7618 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-30Replace hlt() loops with halt()Patrick Georgi
Change-Id: I8486e70615f4c404a342cb86963b5357a934c41d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7606 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-26sandy/ivy: Remove explicit setting of HAVE_SMI_HANDLER.Vladimir Serbinenko
Southbridge already selects it, no need to repeat. Change-Id: I9a5ad553f48e30103371cc2d896168ae4abfb8ef Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7570 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 12:15:06 +0000