summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2020-04-05mb/google/eve: Use ACPI backlight controlsMatt DeVillier
Enables backlight control under Windows. Test: build/boot eve, verify screen backlight controls available and functional under Windows 10. Change-Id: Id4477d2ec71aefb4c9d2ead31cd5fd3bfad51981 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-05mb/google/glados: Use ACPI brightness controlsMatt DeVillier
Enables ACPI backlight controls under Windows. Test: build/boot chell variant, verify screen backlight controls available and functional under Windows 10. Change-Id: Ida0102ac828254ae195528a8f1de078abed4a491 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-05mb/google/cyan: Use ACPI backlight contrlsMatt DeVillier
Enables ACPI backlight controls under Windows. Test: boot Win 10 on cyan and edgar variants, verify screen backlight controls available and functional. Change-Id: I8976291b5bafaec934d0bfd91fcdab50b381beec Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-05mb/google/rambi: use ACPI backlight controlsMatt DeVillier
All variants except NINJA have a built-in display. Enables ACPI brightness controls under Windows. Change-Id: I8dd026608de606fa33f28ccb2967f3beb83b3470 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-03mb/google/auron: Add support for ACPI backlight controlsMatt DeVillier
Test: build/boot lulu and samus variants, verify backlight control functional under Windows 10. Change-Id: I4725fdea5206ae03df14a8b07e51fdf09f1edebd Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-03mb/google/rambi: Disable console output by defaultMatt DeVillier
Disable SoC serial output by default, since no production devices have this exposed, but leave it as a user option so it can be selected as needed (eg, for use with a Google debug servo). Same change as made for google/cyan in CB:39872 Change-Id: Id6b2c28658aca03d8c5042d719a0f6f504c29288 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-03mb/google/rambi: Convert to use override devicetreeMatt DeVillier
Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Change-Id: I52b71cf12a4e0b67135cfb106c3e89b00205d3bc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39996 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-03mb/google/cyan: Adjust ACPI interrupt triggering for audio codecsMatt DeVillier
The jack detect GPIOs are initialized as dual edge-triggered GPIs, and Linux doesn't care if they are set to ActiveLow, ActiveHigh, or ActiveBoth -- a single interrupt is detected on jack insertion or removal. The Windows drivers on the other hand, will not function unless the codec and LPE ACPI interrupts entries are set as in the Intel Cherry Trail Tianocore platform reference code. So adjust the ACPI interrupt triggers to make Windows happy, since Linux doesn't care either way. Test: boot Linux (GalliumOS 3.1) and Windows 10 on google/edgar, observe functional audio output for both built-in speakers and headphones. Change-Id: Ic1dd8ece610d761791c060ece2d0aa51addf97ad Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/24989 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-03mb/google/cyan: Adjust CID for realtek audio codecMatt DeVillier
Adjust CID to allow for Realtek's Windows drivers to attach without breaking functionality under Linux. Both Linux and Windows use ACPI HID/CID matching for driver attachment. Since the Realtek 5650 isn't used in standard Windows laptops, the '10EC5650' HID/CID isn't contained in the Windows drivers' lookup file (.inf), but a catch-all 'INTCCFFD' entry does exist, so concatenate that to the existing CID to allow the drivers to attach. Test: build/boot google/edgar, verify working audio under both Windows 10 (with Realtek drivers 10.0.10586.4393) and Linux (GalliumOS 3.1 / kernel 4.16.18, Manjaro 18.1 / kernel 5.1.x) Change-Id: Idca5cc86ba1f5ef3978cfba291a0c06e56ef5958 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40003 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-03mb/google/cyan: Switch eMMC and SD from ACPI to PCI modeMatt DeVillier
Braswell boards don't work well with the eMMC and SD controller in ACPI in payloads other than depthcharge - SeaBIOS requires an onerous workaround (manually determining the PCI BAR0 address for each eMMC and SD controller, then adding adding etc/sdcard entries to the CBFS), and Tianocore can't see the devices at all. To make the common use-case work better, switch to PCI mode. Test: build/boot cyan variants with SeaBIOS and Tianocore payloads, verify eMMC and SD card visible and bootable to both payloads and OSes. Change-Id: I71947603e22a37fe2c8ef4eaac8a3aa0d0ed1cec Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40002 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-03mb/google/cyan: convert to overridetreeMatt DeVillier
Simply cyan variants by converting to overridetree format. A few differences were ignored as there appears to be no reason behind them: - cyan had PCIe RP2 enabled, but nothing is attached to it - kefka had the SPI 1 device disabled - reks, relm, and ultima had HSUART 1 disabled - edgar had I2C1 UPD disabled Test: build/boot cyan and edgar variants, verify everything still works Change-Id: I9928cc59adcfda4661ddfdfa95f53a7820053b4a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39964 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-03mb/google/glados: convert to overridetreeMatt DeVillier
Simplify glados variants by converting to overridetree format. Change-Id: I6dd7a4b1ae7f1d3ce9fadb06ea95e021a1c880a5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39983 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-03mb/google/glados: drop VR configs from devicetreeMatt DeVillier
The VR config values used in the variants' devicetrees is identical to the domain defaults in vr_config.c, with the exception of the icc_max value, which is calculated dynamically based on SKU, and again matches the default values for each domain and each varaint. Test: add a print function to dump the VR config values for each domain from the UPDs after setting, verify same output before/after. Change-Id: I4307f6e19ae6f99d4f5e475b181fd66c5b92f28c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39982 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-03mb/google/glados: clean up variant devicetreesMatt DeVillier
In preparation for conversion to overridetree format, clean up the variant devicetrees in order to minimize the differences across glados variants. This entails: - minor reformatting and reordering of devicetree entries - addition of setting default values on boards which skipped them - disabling unused I2C2 on boards which left it enabled - ensuring TCC offset set for all SKL-Y boards - setting VR mailbox command 1 for caroline - skipping init for UART2 on cave and glados - dropping unused PCIe RP5 for sentry Change-Id: I628b20a69fab187e67901c9eb98c0e2ddcb76b0d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39981 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-03mb/google/auron: Convert variants to use override devicetreeMatt DeVillier
Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. As part of the cleanup, drop unused PCIe RP5 for buddy as well. Test: build all auron variants, compare generated static.c to ensure resulting generated contents unchanged (although layout will) Change-Id: I290e7243335a64afdcfc629db7b8ce18f5aa993c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-02mb/google/beltino: drop ACPI brightness control stubMatt DeVillier
beltino variants are Chromeboxes without built-in displays, so now that default_brightness_levels.asl is no longer required for all boards in a platform, drop it. Change-Id: Ie8147763fc9fdf4f184d3d000bffd6794e134d9e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-02mb/google/poppy: Add support for ACPI brightness controlsMatt DeVillier
Change-Id: Ie7eb4c43178acff2dc5ff7c685e71990d8f353c9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-02Trim `.acpi_fill_ssdt_generator` and `.acpi_inject_dsdt_generator`Nico Huber
These two identifiers were always very confusing. We're not filling and injecting generators. We are filling SSDTs and injecting into the DSDT. So drop the `_generator` suffix. Hopefully, this also makes ACPI look a little less scary. Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: David Guckian Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-02soc/intel/tigerlake: Reorganize memory initialization supportFurquan Shaikh
This change reorganizes memory initialization code for LPDDR4x on TGL to allow sharing of code when adding support for other memory types. In follow-up changes, support for DDR4 will be added. 1. It adds configuration for memory topology which is currently only MEMORY_DOWN, however DDR4 requires more topologies to be supported. 2. spd_info structure is organized to allow mixed topologies as well. 3. DQ/DQS maps are organized to reflect hardware configuration. TEST=Verified that volteer still boots and memory initialization is successful. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib625f2ab30a6e1362a310d9abb3f2051f85c3013 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-04-02mb/google/volteer: Create Malefor variantWilliam Wei
This commit creates a malefor variant for Volteer. The initial settings override the baseboard was copied from variant ripto. Fine tune GPIO and memory DQ based on malefor schematics. BUG=b:150653745 BRANCH=volteer TEST=emerge-volteer coreboot Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: Idbeebb13e537287686344740211143df35b7863a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39857 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-02google/trogdor: Add 'Lazor' derivativeJulius Werner
This patch adds GOOGLE_LAZOR which is just a copy of GOOGLE_TROGDOR for now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I0dca8e1c29bdd91625d58b3cb583b530ed925e9f Reviewed-on: https://review.coreboot.org/c/coreboot/+/39784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-04-01soc/intel/tigerlake: Remove Jasper Lake SoC referencesAamir Bohra
This implementation removes all JSL references from the TGL SoC code. Additionally, mainboard code changes are done to support build. BUG=b:150217037 TEST=build tglrvp and volteer Change-Id: I18853aba8b1e6ff7d37c03e8dae2521719c7c727 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-04-01soc/intel/{tgl,jsl}: Use soc/intel/jasperlake for Jasper Lake SoCAamir Bohra
Switch to using Jasper Lake SoC code from soc/intel/jasperlake and stop referring from soc/intel/tigerlake. Addtionally mainboard changes are done to support build. BUG=b:150217037 TEST=Build and boot waddledoo. Build jasperlake_rvp and volteer board. Change-Id: I39f117bd66cb610a305bcdb8ea65332fd0ff4814 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-31mb/google/slippy: Convert variants to use override devicetreeMatt DeVillier
Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Test: build all slippy variants, compare generated static.c to ensure resulting generated contents unchanged (although layout will) Change-Id: If237fad38a1bccfb8e51edfae3ecb75d05ade240 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-31mb/google/link: Use GENERIC_SPD_BINMatt DeVillier
Clean up Link's mainboard dir by putting the SPD files in a spd subdirectory like all other/newer boards use, and selecting GENERIC_SPD_BIN to include them in the build. Test: build google/link and verify spd.bin unchanged Change-Id: I9c2f9f77dbdd6552c5ae1e7a0df2051b9b85badc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-31mb/google/link: use default GMA display profileMatt DeVillier
Link's DID data makes no sense, and ACPI backlight controls don't work as a result. Replace them with the default profile used by most/all other boards. Test: build/boot google/link, verify ACPI backlight controls functional Change-Id: Ia7cb3f10bd3c05ebaf414c17a8f94d2e9b40ae26 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-30mb/google/kohaku: Add enable_delay_ms for wacom penEvan Green
Add an enable reset delay to avoid messages like this in the kernel: i2c_hid i2c-WCOM50C1:00: failed to change power setting. This gets rid of all the warnings except one on reboot/shutdown. That last case likely isn't fixed because the sleep command is being sent directly from i2c_hid_shutdown(), so no ACPI routines get to run and provide the delay. Since the machine is going down for shutdown/reboot anyway, fixing that last case is a lower priority. BUG=b:145094539 TEST=Run on kohaku, switch to guest mode and log out, no errors Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: I8fadf497dd09e5b95b1d74443fb0543d3555dbb8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-30mb/google/deltaur: Provide initial devicetreeTim Wawrzynczak
This initial devicetree attempts to correctly configure the status of each PCI device. Not all required drivers are instantiated, nor are all of the SoC options fully selected yet. PCIe root ports are enabled and clocks are assigned. USB ports are assigned. BUG=b:150165131 BRANCH=none TEST=util/abuild/abuild -p none -t google/deltaur -x -a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I911ec08b0db3647d131113a138fb74a55612fd62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-30mb/google/deltaur: Add initial GPIO configurationTim Wawrzynczak
This configuration sets up all of the GPIO pads for the first rev of the board. BUG=b:150165131 BRANCH=none TEST=util/abuild/abuild -p none -t google/deltaur -x -a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4f6398808809492dcb345ccaa09e199fa35e40cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/39674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-30mb/google/deltaur: add deltaur mainboard initial supportBora Guvendik
Created a new Google baseboard using Tiger Lake named deltaur, taking volteer as a starting point. BUG=b:151102807 TEST=make build successful Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Ib98f328df22f39e7d9d625a3292954881ee15b15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-30tgl boards: Configure retimer Aux orientationBrandon Breitenstein
In order to create a working baseline all ports are being set to have retimers. Setting the TcssAuxOri UPD to 0 in order for the SoC to not misconfigure the ports. Volteer will need some additional changes after this is implemented to account for ports that do not have a retimer. This setting is in the process of being documented in the TGL EDS and we can update once it is fully understood what this setting is changing on the SOC side. BUG=b:145943811 BRANCH=none TEST=Boot to OS and check Type-C port1 Display on Volteer, Connecting Type-c display should work regardless of Type-c cable orientation. Change-Id: I29eb0513299126ad8d1ee11ded2c771f28ad13f3 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39460 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-30volteer: Create halvor variantFrank Wu
Create the halvor variant of the volteer reference board by copying the template files to a new directory named for the variant. BUG=b:151399850 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_HALVOR Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: If4d3417ba55d56af441c99d949a196328d7a1951 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-30mb/google/hatch/var/kindred: set wifi sar for kledDavid Wu
Enable wifi sar feature and set wifi sar name for kled sku. BUG=b:152277272 TEST=emerge-hatch coreboot chromeos-bootimage and verify wifi SAR load by sku-id Change-Id: I9ee242773fd05cc2bcd7bde07da8176022827677 Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-03-29mb/google/glados: disable serial console by defaultMatt DeVillier
Glados boards do not have an exposed serial port outside of the servo interface. Set board Kconfig so that a default built image with Tianocore payload is bootable and doesn't hang due to trying to send data over a non-existant serial port. Test: build/boot google/chell with board defaults Change-Id: Ifad6f805e66438e2c436d9fa235d9be2ecf69179 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-29drivers/intel/gma/acpi: Provide default definition for displaysNico Huber
Use it wherever the standard numbers were copied to. Bit 31 is set at runtime unconditionally, so we don't need it here. Change-Id: I0d853c3b8250a2c7b2d1a91985a555e4b17ad76c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39731 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-29nb/intel/haswell: Implement proper backlight PWM configNico Huber
Further backport the backlight-PWM handling from Skylake. Beside configuring the PWM frequency in Hz, we also use the PCH's logic for the brightness setting via BLM_PCH_OVERRIDE_ENABLE. Linux would toggle it anyway and that might confuse our ASL code. We assume that the 183Hz value that was set before for Slippy variants was overridden by Linux with the 200Hz VBT value, like it was for the Broadwell Chromebooks. So we set 200Hz for them in the devicetrees. The calculated value for the T440p of 220Hz seems sane and also matches the VBT. Change-Id: I17dfe1a3610d5e2918c617cf5d10896692fdccb3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-29mb/google/cyan: Clean up KconfigMatt DeVillier
Cyan has no VGA BIOS available (at least not publicly), so remove related options. Disable SoC serial output by default, since no production devices have this exposed, but leave it as a user option so it can be selected as needed (eg, for use with a Google debug servo). Change-Id: Ic079a39ca5ad0ac653b52248244b94d4bfbd08a4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39872 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-29mb/google/glados: remove Chrome-EC defaultsMatt DeVillier
Chrome-EC/PD images for all glados variants need to be built from the board-specific branch, not master. Including the default board names serves no purpose and requires users to deselect the "use built-in EC firmware" in order for the board to build. Test: build google/chell with defaults Change-Id: Ic10f11337b85035068cdc4fe8147413e6b7f57ac Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-29hatch: Create sushi variantPaul Fagerburg
Create the sushi variant of the hatch reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 3.0.0). BUG=None BRANCH=None TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_SUSHI Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: Ie900d09ff55e695527eafe68a5a75cd4a0b6d340 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-03-26mb/google/dedede: Query the EC for board versionDtrain Hsu
The board version is part of EC's EEPROM, select Kconfig item to enable requesting the EC for board version. BUG=b:152374066 TEST=Verified the mainboard version is from EC's EEPROM. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Idd8aceed83439cb500e2b03153e9f8ba93979ee8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-26mb/google/hatch/variants/nightfury: Replace unneeded white spaces by tabsElyes HAOUAS
Change-Id: Icda241cfac7b428176515d7996a48cb01b1dc976 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39815 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26mb/google/volteer: Use tabs for indentsElyes HAOUAS
Change-Id: I7304b06d7bf34fb7126acfdef811481dc5cba598 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-26drivers/net/r8168: Fix ethernet_mac[0-9] format for vpdEdward O'Callaghan
The format for VPD has changed s.t. the first NIC should always have a zero concat to the end. Adjust all the respective boards to shift back by one and adjust drivers/net friends to remove the 'special casing' of idx == 0. Background: https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn V.2: Fixup a code comment typo while we are here. V.3: Vary special casing semantics for idx==0 => default mac addr is set. V.4: Rework to still support the legacy path. BUG=b:152157720 BRANCH=none TEST=none Change-Id: Idf83cc621a9333186dabb668b22c4b78e211930a Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-25mb/google/dedede: Update EC_MKBP_INT_L configurationKarthikeyan Ramasubramanian
The concerned GPIO is configured as an open drain at the Embedded Controller side without an external pull-up. This causes leakage in the PP3300_A rail. So configure the GPIO to have a weak internal pull-up at the SoC side. BUG=b:151680590 TEST=Build the mainboard. Ensure that there are no leakages in the PP3300_A rail. Change-Id: I5553cf40adb92edc0fecab5c875ec8d72063ba7b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-25acpi: correct the processor devices scopeMichał Żygowski
The ACPI Spec 2.0 states, that Processor declarations should be made within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated and is removed here. Additionally add processor scope patching for P-State SSDT created by AGESA, becasue AGESA creates the tables with processors in \_PR scope. TEST=boot Debian Linux on PC Engines apu2, check dmesg that there are no errors, decompile ACPI tables with acpica to check whether the processor scope is correct and if IASL does not complain on wrong checksum, run FWTS Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I35f112e9f9f15f06ddb83b4192f082f9e51a969c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39698 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-24drivers/intel/gma: Ditch `link_frequency_270_mhz` settingNico Huber
The `link_frequency_270_mhz` setting was originally used by the native graphics init code for Sandy/Ivy Bridge, which is long gone. The value of this information (which board had it set) is questionable. The only board that had an LVDS panel and set it to 0 was the ThinkPad L520, where native graphics init was never reported to work. Also, the native graphics init only used it for calculations, but never confi- gured the hardware to use a specific frequency. A look into the docu- mentation also doesn't reveal any straps that could be used to confi- gure it. Change-Id: Ieceaa13e4529096a8ba9036479fd84969faebd14 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39763 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-24mb/google/hatch: Give first NIC in Puff idx 1 for vpdEdward O'Callaghan
The format for VPD has changed s.t. the first NIC should always have a zero concat to the end. drivers/net supports this with the workaround of setting the idx to 1. The longer term fix is to adjust all the respective boards to shift back by one and adjust drivers/net friends to remove the 'special casing' of idx == 0. Background: https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn BUG=b:152157720 BRANCH=none TEST=none Change-Id: I510428c555b92398a5199b346dffb85d38495d74 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-23acpi: Change Processor ACPI Name (Intel only)Christian Walter
The ACPI Spec 2.0 states, that Processor declarations should be made within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated and is removed here for Intel CPUs only. Tested on: * X11SSH (Kabylake) * CFL Platform * Asus P8Z77-V LX2 and Windows 10 FWTS does not return FAIL anymore on ACPI tests Tested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: Ib101ed718f90f9056d2ecbc31b13b749ed1fc438 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-23src/mb/google/volteer: Add camera ACPI configurationDaniel Kang
Add camera ACPI configuration for Ripto/Volteer BUG=None BRANCH=None TEST=Build and boot Ripto or Volteer. Start camera app and able to capture images. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I2b47ccd989192273a29f09bf097e12e357929334 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-23mb/google/volteer: Enable PD_MCU devicePrashant Malani
This is required for PD notifications on the cros_ec driver. BUG=b:150649744 TEST=Boot volteer with this patch and verify that PD notifier events are being generated. Signed-off-by: Prashant Malani <pmalani@chromium.org> Change-Id: I2e72320b025a3dfa7412181586cb142a4503eda5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-30 00:25:20 +0000