summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2014-05-15rambi: Add ACPI devices and interrupts for codec and ALSDuncan Laurie
2014-05-15rambi: Add ACPI table support for I2C devicesDuncan Laurie
2014-05-15rambi: disable SERIRQ native functionalityAaron Durbin
2014-05-13rambi: dptf: Set critical thresholdsDuncan Laurie
2014-05-13rambi: Update the DPTF configurationDuncan Laurie
2014-05-13rambi: Move KBD_IRQ pin for Rambi 2.0 boardShawn Nematbakhsh
2014-05-12Rambi: Enable 32k SUSCLK signalKyösti Mälkki
2014-05-12rambi: Make eMMC CLK pull-down and change pull strengths to 20KShawn Nematbakhsh
2014-05-12rambi: specify reference code index in vboot areaAaron Durbin
2014-05-12rambi: Disable HSUART2 and SPI interfacesDuncan Laurie
2014-05-12rambi: Enable SCC devices in ACPI modeDuncan Laurie
2014-05-09rambi: Enable DPTFDuncan Laurie
2014-05-09rambi: Set panel power timingsDuncan Laurie
2014-05-09rambi: change SD card pulls to 20KAaron Durbin
2014-05-09rambi: limit SD card controller to 2.0 specAaron Durbin
2014-05-09rambi: export SPI write-protect GPIO correctlyAaron Durbin
2014-05-08ChromeOS boards: Always build code for bootmode strapsKyösti Mälkki
2014-05-08ChromeOS boards: Fix includesKyösti Mälkki
2014-05-08Declare get_write_protect_state() without ChromeOSKyösti Mälkki
2014-05-08rambi: Make ec_in_rw a legacy GPIOShawn Nematbakhsh
2014-05-08rambi: Change eMMC pin PUs to 2KShawn Nematbakhsh
2014-05-08rambi: configure SD card signalsAaron Durbin
2014-05-08rambi: configure the LPE audio codec clockAaron Durbin
2014-05-07rambi: Remove outdated commentPatrick Georgi
2014-05-07rambi: handle single channel configsAaron Durbin
2014-05-07rambi: use SERIRQ pad as keyboard irq in gpio modeAaron Durbin
2014-05-07rambi: make ramids non-legacy gpio inputsAaron Durbin
2014-05-07rambi: distribute IRQs away from PIRQA on pci devicesAaron Durbin
2014-05-07rambi: fixup settings so trackpad can be found in kernelAaron Durbin
2014-05-07rambi: Add DIRQs for trackpad and touchscreenShawn Nematbakhsh
2014-05-06rambi: disable HDA deviceAaron Durbin
2014-05-06rambi: enable SCI and SMI gpiosAaron Durbin
2014-05-06rambi: mainboard EC - SCI and SMI fixesAaron Durbin
2014-05-06rambi: include the EC devices normally on superioAaron Durbin
2014-05-06rambi: update EC supportAaron Durbin
2014-05-06baytrail: configure acpi SCI irqAaron Durbin
2014-05-06rambi: mirror bayleybay's eMMC gpio setupAaron Durbin
2014-05-06rambi: Fix eDP panel functionalityDuncan Laurie
2014-05-05baytrail: fix up FADTAaron Durbin
2014-05-05baytrail: interrupt routing supportAaron Durbin
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
2014-05-01ChromeOS: Use common fill_lb_gpio()Kyösti Mälkki
2014-05-01ChromeOS: Remove oprom_is_loadedKyösti Mälkki
2014-05-01google/stout: Fix build without ChromeOSKyösti Mälkki
2014-04-30baytrail: Clean up NVS regionDuncan Laurie
2014-04-30baytrail: Add reserved MMIO regions to ACPIDuncan Laurie
2014-04-30baytrail: Fix XHCI problems and re-enableDuncan Laurie
2014-04-30console: Move UART port defaults to mainboardKyösti Mälkki
2014-04-26Rename coreboot_ram stage to ramstageFurquan Shaikh
2014-04-26Get rid of HAVE_INIT_TIMER config optionFurquan Shaikh
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 13:33:20 +0000