coreboot - Some coreboot project code with my work

Age	Commit message (Expand)	Author
2017-03-16	google/poppy: Use rt5663 interrupt as GpioInt instead of PIRQ	Rizwan Qureshi
2017-03-16	google/eve: Use rt5663 interrupt as GpioInt instead of PIRQ	Duncan Laurie
2017-03-16	mainboard/google/reef: Increase PL2 Max to 15W	Tim Chen
2017-03-15	google/eve: Update MCU GPIOs configuration	Vincent Palatin
2017-03-15	google/eve: Apply default AC/DC loadline settings	Duncan Laurie
2017-03-15	intel/skylake: Fix bug in VR configuration with FSP 2.0	Duncan Laurie
2017-03-15	google/eve: Use rt5514 instead of 4ch DMIC	Duncan Laurie
2017-03-15	mainboard/google/reef: Add FPF_STATUS FMAP region	Andrey Petrov
2017-03-14	google/sand: Remove support for tablet mode switch	Katherine Hsieh
2017-03-12	google/poppy: Enable internal pull-up on PWRBTN#	Shobhit Srivastava
2017-03-10	google/sand: Add devicetree.cb file for sand	Katherine Hsieh
2017-03-10	mainboard/google/reef: Modify TCPU, TSR2 and TRT table	Tim Chen
2017-03-10	mainboard/google/reef: Configure SDCARD card detect pin	Venkateswarlu Vinjamuri
2017-03-09	drivers/spi/tpm: provide Kconfig to indicate CR50 usage	Aaron Durbin
2017-03-09	mainboard/google/reef: increase pre cbmem console size for Chrome OS	Aaron Durbin
2017-03-09	google/poppy: Configure SRCCLKREQ4 as No Connect	Naresh G Solanki
2017-03-09	google/pyro: Update DPTF settings	Kevin Chiu
2017-03-09	mainboard/google/poppy: Enable cros_ec_keyb device	Furquan Shaikh
2017-03-08	mainboard/google/poppy: Add EC_HOST_EVENT_MODE_CHANGE to wakeup source	Furquan Shaikh
2017-03-08	google/eve: Configure GPIOs for new board	Duncan Laurie
2017-03-08	mainboard/google/snappy: Override USB2 phy setting	Wisley Chen
2017-03-07	google/gru: add MAX_SDRAM_FREQ config to choose max ddr freq	Shunqian Zheng
2017-03-07	google/veyron: add K4B4G1646E-BYK0 ddr with ramid 000Z	Shunqian Zheng
2017-03-07	google/veyron_*: Add new Micron and Hynix modules	David Hendricks
2017-03-07	google/poppy: fix finger print sensor interrupt gpio configuration	Rizwan Qureshi
2017-03-02	mainboard/google/poppy: Disable deep S3 on poppy	Furquan Shaikh
2017-02-25	mainboard/google/reef: keep LPSS_UART2_TXD high in suspend state	Aaron Durbin
2017-02-25	google/eve: Add rise/fall times for I2C buses	Duncan Laurie
2017-02-24	mainboard/google/poppy: Change touchscreen IRQ to level-triggered	Furquan Shaikh
2017-02-23	google/gru: whitespace fix	Patrick Georgi
2017-02-23	google/gru: Tuning USB 2.0 PHY0 and PHY1 squelch detection threshold	William wu
2017-02-23	google/gru: update the pwm regulator	Caesar Wang
2017-02-23	mb/google/poppy: Enable support for DPTF	Sumeet Pawnikar
2017-02-23	google/oak: Add initial support for Rowan	Yidi Lin
2017-02-23	google/gru: improve eye diagram for passing the test	Caesar Wang
2017-02-22	acpi: Add ACPI_ prefix to IRQ enum and struct names	Furquan Shaikh
2017-02-22	google/gru: Fix whitespace	Patrick Georgi
2017-02-21	mainboard/google/poppy: Enable Realtek 5663 support	Rizwan Qureshi
2017-02-21	mainboard/google/poppy: Enable Maxim MAX98927 codec	Rizwan Qureshi
2017-02-21	mainboard/google/poppy: Generate required nhlt table	Rizwan Qureshi
2017-02-20	drivers/i2c: Use I2C HID driver for wacom devices	Furquan Shaikh
2017-02-20	google/eve: Set touchscreen I2C bus speed to 1MHz	Duncan Laurie
2017-02-20	google/eve: Add audio devices	Duncan Laurie
2017-02-20	mainboard/{google,intel}: Change config option selection	Furquan Shaikh
2017-02-20	mainboard/google/reef: Remove config DRIVERS_GENERIC_GPIO_REGULATOR	Furquan Shaikh
2017-02-20	google/slippy: consolidate variants' common mainboard.asl code	Matt DeVillier
2017-02-20	google/eve: Set rise/fall timing values for I2C bus 1	Duncan Laurie
2017-02-20	google/eve: Fix FPC support	Duncan Laurie
2017-02-17	mainboard/eve: select SOC_INTEL_KABYLAKE	Rizwan Qureshi
2017-02-17	mainboard/poppy: select SOC_INTEL_KABYLAKE	Rizwan Qureshi