summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2018-10-06mb/google/octopus: Disable I2C3 in devicetreeFurquan Shaikh
I2C3 is connected to the debug header and won't be required unless connecting the debugger. This change disables I2C3 device (16.3) in devicetree. Change-Id: I650fa040075119a21864c83d8470dd2155c9edb9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2018-10-06mb/google/poppy/variants/nocturne: Add DMIC properties to ACPI DSDFurquan Shaikh
This change uses the generic device driver to provide DMIC properties in ACPI table to the OS driver. BUG=b:112888584 Change-Id: I239f571bc29f02793f017a4713b5af03b23cfa3e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28797 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: HARSHAPRIYA N <harshapriya.n@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-05mb/google/octopus: adjust Bobba I2C CLK under 400KHzPan Sheng-Liang
Need to tune I2C bus 0/6/7 clock frequency under the 400KHz for digitizer, touchpad, and touchscreen. Bug=b:117126484 TEST=flash coreboot to the DUT and measure I2C bus 0/6/7 clock frequency whether can <400KHz Change-Id: Icb9592c688b864a21efd4963a4463845dfaa06fb Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28907 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-05mb/google/poppy/variants/nautilus: Change SlowSlewRate settings for LTE skuSeunghwan Kim
Nautilus-LTE sku shows abnormal reset symptom at high temperature chamber test, but the root cause is unclear. Experimentally, setting SlowSlewRate IA/GT/SA to 1/2 improves this abnormal reset issue, so we would apply it until find root cause of this issue. BUG=b:117130599 BRANCH=poppy TEST=Built and passed on reliability test with modified coreboot Change-Id: I7fa0041989113097e3b283dbcf4ca2a73629fe54 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/28785 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-05atlas: control touchscreen power using ACPICaveh Jalali
This adds the ACPI controls for power sequencing the touchscreen. The initial setting is to keep the touchscreen powered off and in reset. When linux is ready to talk to the touchscreen, it powers it on and releases reset via ACPI. BUG=b:110286344 TEST=verified touchscreen is functional in chromeos Change-Id: I58c42a8f09342cfe54f82ef0e6cd8ea72a5140dc Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28869 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04mb/google/kahlee: Don't set stapm parametersMartin Roth
Setting the stapm parameters is causing S3 resume failures and performance issues. Removing these settings until more testing is done and the issues are solved. BUG=b:117252463, b:116870267 TEST=boot grunt Change-Id: I2299ab81fcc2af0529bfac3be562b05116c64a49 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-04google/grunt: Correctly extract OEM string from CBFSKevin Chiu
In CBFS layout: oem.bin size is 10 bytes. In cbfs_boot_load_file, buffer size will need to be larger than decompressed_size, otherwise CBFS data can not be extracted into buffer. Then we need to check buffer whether it's empty string separately. BUG=b:79874904 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I4f1bbb690ecca515ac920f5058ee19b5bfd8fa5e Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/28889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-04mb/google/poppy/variant/nocturne: update GPIO configurationNick Vaccaro
GPP_C19 is not being set as the code is incorrectly setting GPP_C16 instead, causing SAR sensor not to work, so this change sets GPP_C19 to NF1. GPP_E3 is not being initialized in the code. Initialize GPP_E3 to a no connect as documented in the board schematic. BUG=b:117124878 TEST: 'emerge-coreboot chromeos-bootimage', flash nocturne and verify that i2c transactions work for the left SAR sensor. Change-Id: I9e972dbe4214cdd15d80d63dfa058e7755f7ecbb Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28867 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04mb/google/poppy/variant/nocturne: increase touchscreen reset delayNick Vaccaro
Increase the reset delay for the touchscreen to 10 ms. BUG=b:116857433 TEST='emerge-nocturne coreboot chromeos-bootimage', flash and boot nocturne to kernel, log in and execute the following two commands: echo "i2c-WCOM50C1:00" > /sys/bus/i2c/drivers/i2c_hid/unbind echo "i2c-WCOM50C1:00" > /sys/bus/i2c/drivers/i2c_hid/bind and verify the bind command does not echo back a "-bash: echo: write error: No such device" error. Change-Id: I102b57ea5a10d22bee6d4f7c6f114b380a5d586b Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28803 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Caveh Jalali <caveh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04mb/google/poppy/variants/rammus: Shorten oem_table_id to RAMMUSmarxwang
This patch modifies "oem_table_id" from "RAMMUSMAX" to "RAMMUS" so that the audio topology file can be loaded properly by the operating system. BUG=b:112945714 BRANCH=master TEST=There is no error message like "failed to load topology firmware" in kernel v4.4 log. Change-Id: I66a38ea38791dd3d9606a05b7b696236c350237f Signed-off-by: Marx Wang <marx.wang@intel.com> Reviewed-on: https://review.coreboot.org/28870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-04mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for FleexIvy Jian
Enable DRAM_PART_NUM_IN_CBI feature to get DRAM part number from CBI and set DRAM_PART_IN_CBI_BOARD_ID_MIN to 2 for DVT. BUG=b:116721822 TEST=Verified it in Fleex EVT board which rework ram id. Change-Id: I0f191c950aa6a70069bffa1f1802386ab263a310 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-04mb/google/nocturne: Define GPP_D17 as EC_SYNC_IRQDuncan Laurie
Use GPIO GPP_D17 pin as the EC sync interrupt and provide this value to the embedded controller to be exported to the OS. This interface was tested on a reworked Nocturne board with modified EC and a modified kernel driver to ensure that the interrupt asserts as expected and can be used by the kernel driver. Change-Id: Ie2b33692367b5d9ecc2b128180d8cfe4f6b347b1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/28759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-03mb/google/kahlee: Update careena Audio/TP i2c timingKevin Chiu
After adjustment on Careena Audio: 402.805 kHz -> 396.8 kHz TP: 406.1 kHz -> 399.5 kHz BUG=b:110984023 BRANCH=master TEST=emerge-grunt coreboot Change-Id: Ia3eb91ca3772d5f122498e3989ec03838fce06a5 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/28868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-03google/kahlee: Enable IOMMU deviceMarc Jones
Enable the IOMMU device on all kahlee based mainboards. BUG=b:116196614 TEST=Check dmesg for AMD-Vi messages. Change-Id: I18b9ba1a970c6973226e736d72f82fd53010f31c Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/28754 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-01mb/google/octopus: Operate touchpad I2C CLK in specChris Zhou
Need to tune I2C bus 6 clock frequency under the 400K Hz Bug=b:115600671 TEST=flash coreboot to the DUT and measure I2C bus 6 clock frequency whether arrive to 398.07K Hz Change-Id: I5cc1f67f0db0553cb8424f81408ed4686cddb2fb Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-01google/kahlee: Run FCH PTS and WAK methodsMarshall Dawson
The FCH ASL is now capable of controlling the D-states of most AOAC devices, as well as properly reinitializing the xHCI firmware on a resume. Call the FPTS and FWAK methods. BUG=b:77602074 TEST=On Grunt, go to S3 and wake with a USB keyboard Change-Id: I4df8523569dc3dfbd87f79e780c18d39f0d9a37f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28773 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-28mainboard/google/poppy/variants/rammus: Modify VR settingstatham_chu
We refer to Intel Doc#594883. The recommended Ac/Dc loadline values are as below: # VR Settings Configuration for 4 Domains #+----------------+-------+-------+-------+-------+ #| Domain/Setting | SA | IA | GTUS | GTS | #+----------------+-------+-------+-------+-------+ #| Psi1Threshold | 20A | 20A | 20A | 20A | #| Psi2Threshold | 2A | 2A | 2A | 2A | #| Psi3Threshold | 1A | 1A | 1A | 1A | #| Psi3Enable | 1 | 1 | 1 | 1 | #| Psi4Enable | 1 | 1 | 1 | 1 | #| ImonSlope | 0 | 0 | 0 | 0 | #| ImonOffset | 0 | 0 | 0 | 0 | #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | #| AcLoadline | 14.4 | 4.2 | 5.7 | 4.47 | #| DcLoadline | 14.0 | 4.17 | 4.2 | 4.3 | #+----------------+-------+-------+-------+-------+ BUG=b:112167318 BRANCH=master TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure system boots up. Change-Id: I2d83d835ec841ac4cc811a0a69f74d203d5ea173 Signed-off-by: statham_chu <statham_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-28soc/intel/cannonlake: Update UPD from device switchLijian Zhao
Some of the FSP silicon UPD entry can be updated base on device switch in pci device tree, have both static config setting and device tree "on" and "off" will be redundant. BUG=N/A TEST=Build and boot up fine with Whiskey Lake RVP platform. Change-Id: Ia36cfab03c4613786e5580a039d89007b630adf9 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27766 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-28src/*: normalize Google copyright headersPatrick Georgi
As per internal discussion, there's no "ChromiumOS Authors" that's meaningful outside the Chromium OS project, so change everything to the contemporary "Google LLC." While at it, also ensure consistency in the LLC variants (exactly one trailing period). "Google Inc" does not need to be touched, so leave them alone. Change-Id: Ia0780e31cdab879d2aaef62a2f0403e3db0a4ac8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2018-09-26mb/google/poppy/variants/nocturne: Update PowerLimit1 maximum valueSumeet Pawnikar
Increase power limit1 maximum value from 5W to 7W. This value as per recent measurement on closed system which shows better performance results. BUG=None TEST=Build and tested on Nocturne system. Performance tests show better results. Change-Id: I7485b1d2afde46ec28d548c13be35a43e7572918 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/28686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-26mb/google/poppy/variants/nocturne: Add tdp_pl1_override valueSumeet Pawnikar
Add tdp_pl1_override value as 7W. BUG=None BRANCH=None TEST=Build coreboot for Nocturne board Change-Id: I16d3894da68bc3be6eff526062f9a88ef2df60c7 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/28708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Puthikorn Voravootivat <puthik@chromium.org>
2018-09-26mb/google/poppy/variants/nocturne: Update DPTF settingsPuthikorn Voravootivat
The previous does not work well enough when testing with high ambient temperature. Update DPTF settings to make it work better. List of tweaks: 1. Raise DRAM Critical temperature from 48C to 55C Note that there are mechanisms in EC that complement this because of DPTF limitation that we can't have multiple passive temperatures. 2. Lower response time for DRAM temp sensor from 60s to 5s. 3. Increase throttle priority to the charger when DRAM hit passive temperature from 100 to 200. BUG=b:112550414 BRANCH=None TEST=Manually tested by thermal team. Change-Id: Idf7efa76b2c6085cf97aa9f65c6ce066e8cff99a Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/28738 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-26cheza: Wrap FMAP sections with calibration data in RO_PRESERVE sectionJulius Werner
The Cheza board contains a couple of non-standard FMAP sections that contain per-board calibration data. When flashing new firmware to the board, care should be taken to copy these sections over so that all features can still function correctly afterwards. This patch wraps a new RO_PRESERVE FMAP section around these sections to make them easier to preserve as a group. Change-Id: I77919336f609a1be399598736f46921c3da99e68 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/28728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: T Michael Turney <mturney@codeaurora.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-09-26mb/google/octopus: Touchpad I2C CLK (405.25KHz)over spec(＜400KHz)peichao.wang
Need to tune I2C bus 6 clock frequency under the 400KHz Bug=b:116543001 TEST=flash coreboot to the DUT and measure I2C bus 6 clock frequency whether arrive to 399.1KHz Change-Id: I95b535a6b429fc34961a4953004a1c51e53a9be6 Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28747 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-26Revert "mb/google/poppy/variants/nautilus: Set grip sensor threshold"Seunghwan Kim
This reverts commit aef592d9b66aa18d83b0a211ead26013ff1f7d98. Reason for revert: Use values from driver instead of hardcoding in firmware (b:113303916) Change-Id: I02d21803f38da227f1d85b00cb6b5274d81dbbb4 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/28690 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Enrico Granata <egranata@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-26mb/google/octopus: Close unused I2C bus 7 include SCL and SDA for PhaserPeichao Wang
Since I2C bus 7 attached the touchscreen device however Phaser units that haven't it. So for avoiding side effects, we need close I2C bus 7 SCL and SDA respectively. BUG=none TEST=according to sku_id (Phaser: 0x1, Phaser360: 0x2, Phaser360s: 0x3) distinguish whether close these gpios. Change-Id: I8ad17761f2a053dc329bbec0a0a3284d47289666 Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28669 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Jett Rink <jettrink@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-25mainboard/google/kahlee: Only read a single vendor from oem.binMartin Roth
Since each variant has a separate build, we don't need to support multiple manufacturers in a single file. BUG=b:79874904 TEST=Build, boot, see updated mainboard manufacturer Change-Id: I0ccf207ba8d5e5200aa4b19c46784bbda82f7b6e Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/28729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-09-25mb/google/kahlee/variants/liara: Disable NbP-state on LiaraAmanda Huang
To disable NB-Pstate, the system wouldn't auto restart on EVT board when idling. BUG=b:116082728 Change-Id: Iec4f0355cb6eb1c2b0372e3d131cc5e6ba36635e Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-24soc/amd/stoneyridge/romstage.c: Move STAPM code to SOC specificRichard Spiegel
STAPM programming was created inside function OemCustomizeInitEarly(). It should be SOC specific, and called by agesawrapper just before the call to OemCustomizeInitEarly(). BUG=b:116196626 TEST=build and boot grunt Change-Id: I8a2e51abda11a9d60a9057b38f2a484e1c8c9047 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28705 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21mb/google/octopus: Create ampton variantJustin TerAvest
This commit creates an ampton variant for Octopus. The initial settings are copied from Bip, but the following changes are made to support hardware differences: * GPIO_66 is not connected (LTE). * GPIO_67 is not connected (LTE). * Updated comment for GPIO_134 (EC_AP_INT_ODL), but not configured yet. * GPIO_143 is not connected. * GPIO_144, GPIO_145 mapped to PEN_EJECT are not connected. * EN_PP3300_TOUCHSCREEN moved from GPIO_213 to GPIO_146. * GPIO_213 is not connected. * GPIO_214 is not connected. BUG=b:111498206 TEST=None Change-Id: I7d6cf19c906df19115b1101e3d91c62f5f3f61e3 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/28663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-21mb/google/poppy/variants/rammus: Disable command TriState for rammusmarxwang
This patch sets the MRC UPD "CmdTriStateDis" to disable TriState for the rammus boards. Rammus is LPDDR3 design without RTT for CMD/CTRL. BUG=none TEST=Run memtester app and also webgl fishtank on the LPDDR3 kabylake boards and also check the margin data is proper in FSP. Change-Id: Iee115f49ba5b36dc5b0425e9da02b58cd19b2236 Signed-off-by: Marx Wang <marx.wang@intel.com> Reviewed-on: https://review.coreboot.org/28568 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21google/kukui: Set up EC_IN_RW GPIO for ChromeOSTristan Shieh
Set up EC_IN_RW GPIO to boot depthcharge. Without this patch, depthcharge will fail to tell if the EC firmware is RW. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui and see in logs, that depthcharge detects EC_IN_RW GPIO. Change-Id: Icb39d663f65b72e0ad54059c9590d9693106ee25 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28670 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21mb/google/poppy/variant/nocturne: set DMIC1 to NCNick Vaccaro
Change GPP_D17 and GPP_D18 to no connects as DMIC was moved to DMIC0. BUG=b:113744731,b:111106010 TEST=none Change-Id: I8ef42627e542182707c81389af9da33a114bc184 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28689 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21mainboard/google/kahlee: allow oem.bin file to update smbiosMartin Roth
Grunt variants need a way to customize the mainboard vendor based on the platform. For future boards, this can probably be done via CBI, but grunt doesn't support that method. BUG=b:79874904 TEST=Build, boot, see updated mainboard vendor Change-Id: I997dc39c7f36f70cf4320ef335831245889eb475 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/28651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@google.com>
2018-09-21mb/google/octopus/variants/fleex: Update DPTF parametersSumeet Pawnikar
Update Power Limit1 and Power Limit2 values along with stepsize. Correct the charger effect for Temperature sensor2. BUG=b:112448519 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I01e0a94fe694537d9eebe3b92c11d0c83137d716 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/28530 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20mb/google/zoombini: Use Chrome EC BOARDID definitionKarthikeyan Ramasubramanian
The board_id() definition is the duplicate of chrome EC board_id definition. Remove the duplicate definition and select EC_GOOGLE_CHROMEEC_BOARDID Kconfig item. BUG=b:114001972,b:114677884,b:114677887 Change-Id: Id8b7027d653649e8e5791e455652c4e893a746c2 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Tested-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Reviewed-on: https://review.coreboot.org/28609 Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20ec/google/chromeec: Update google_chromeec_get_board_version prototypeKarthikeyan Ramasubramanian
The helper function to get the board version from EC returns 0 on failure. But 0 is also a valid board version. Update the helper function to return -1 on failure and update the use-cases. BUG=b:114001972,b:114677884,b:114677887 Change-Id: I93e8dbce2ff26e76504b132055985f53cbf07d31 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Tested-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/28576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com>
2018-09-20mb/google/poppy/variants/nocturne: Update DPTF settingsPuthikorn Voravootivat
Update DPTF settings based on recommendation from thermal team. BUG=b:112550414 BRANCH=None TEST=Manually tested by thermal team. Change-Id: I26f09392a3293ce4b3481f2be341a667d606bc10 Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/28666 Reviewed-by: Todd Broch <tbroch@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for meepWisley Chen
Enable DRAM_PART_NUM_IN_CBI feature to get DRAM part number from CBI and set DRAM_PART_IN_CBI_BOARD_ID_MIN to 1 for EVT. BUG=b:115965629 TEST=verified it in meep proto board which rework ram id. Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I962b099d5b9fbe0ca29708be1e9c6ed60b10d363 Reviewed-on: https://review.coreboot.org/28658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-09-18mb/google/kahlee/variants/careena/devicetree.cb: Set STAPM valuesRichard Spiegel
AMD has tested careena, and for the time being is recommending a scalar of 68%, power limit of 7.8 W and time constant of 2500. Using new STAPM configuration code, set the desired values. BUG=b:111561217 TEST=none, code was tested with grunt. Change-Id: I42671ab0e66b21dc4f8c8c326c1fa33328b1390e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-09-18mainboard/google/kahlee: Set EMMC reset pin to output lowMartin Roth
While the pin was set to a pull-down, with the external pull-up, this wasn't enough to keep the pin low. Set to output low to drive to 0V. TEST=Boot grunt, verify EMMC_BRIDGE_RST is 0V. BUG=b:115661061 Change-Id: Ife014b8a879274df5d892c1de386976808de1df0 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-18mainboard/google/kahlee: Don't set global subsystem IDsMartin Roth
These values override the default subsystem IDs, and aren't needed. BUG=b:113253260 TEST=Boot grunt Change-Id: I3c56534b094ede8d8200b72f4433a891d0094064 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/28652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-17mb/google/kahlee/variants/baseboard: Set STAPM percentageRichard Spiegel
Default STAPM percentage causes a lot of thermal throttling on grunt. AMD experimented with 80%, it works for grunt. This is initial code to provide easy change path for other grunt based platforms. BUG=b:111608748 TEST=build and boot grunt. Change-Id: I22863f6ed76152bf872fce3e275f8a7fd8077504 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-17google/buddy: Add board as variant of google/auronMatt DeVillier
Add google/buddy (Acer Chromeboase 24) as a variant of google/auron, with the following changes: - add buddy-specific variant code - add handling to auron for buddy's lan init, which no other variants have - add handling to auron's mainboard ACPI due buddy having different PCIe port assigments than all other variants Ported from Chromium branch firmware-buddy-6301.202.B, commit ebb82ce [Buddy: Lock management engine + SPI descriptor] Test: build/boot Linux on google/buddy using SeaBIOS and Tianocore payloads Change-Id: Ib76eef47677b72ddaef81a2decef189a5f20c20a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/28613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-17google/auron: Clean up variant-specific romstage codeMatt DeVillier
Use an empty weak function for variant_romstage_entry(), rather than having separate empty functions for boards which don't utilize it. Change-Id: I7a278ed716484bea377a5dd98d4a534502c8bab6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/28612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-16google/kukui: Configure EMMCTristan Shieh
Set up EMMC gpios for payloads. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1e7ee9bfe3a26ed04374e8c74243f48552a1d254 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/28546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-09-16mb/google/poppy/variants/rammus: fix S0ix entering issueZhuohao Lee
As we don't use the MIPI camera on Rammus, disable SA Imaging Unit and CIO2 devices to avoid the system failed to enter S0ix. BUG=b:114502527 BRANCH=master TEST=On DUT, echo freeze > /sys/power/state 1. check the S0ix status on EC console 2. check the value of /sys/kernel/debug/pmc_core/slp_s0_residency_usec Change-Id: I91629732db01ee534f0ddb67a2b358d725ef810e Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/28543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-16google/kukui: Notify EC that AP is in S0Hung-Te Lin
We have a pin from AP to EC, called AP_IN_SLEEP_L (SRCLKENA0 on AP side, pad R23) that is supposed to be high in S0, and low in S3 (and X/don't care in S5). This should be set as early as possible in bootblock. BUG=b:113367227 TEST=make; boots and verified AP_IN_SLEEP_L GPIO is high. BRANCH=None Change-Id: Icd59fa366c162e7443b8932a851e65f110f551ab Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/28585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@google.com>
2018-09-16mb/google/poppy: Set UPD CmdTriStateDis for AtlasCaveh Jalali
This patch sets the MRC UPD CmdTriStateDis for the atlas boards. Atlas is a LPDDR3 design without RTT for CMD/CTRL. The original change for nocturne is I0f593761dcbd121e7e758421af178931b9d78295 mb/google/poppy: Set UPD CmdTriStateDis for Nocturne BUG=b:111812662 Change-Id: I45b6dd22412c689c8db64f4650e9fa9e87dec2ec Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-09-14mb/google/octopus: Query the EC for board versionKarthikeyan Ramasubramanian
The board version is part of EC's EEPROM, but is not being populated from EEPROM. Instead a default Kconfig parameter is returned as board version. Select GOOGLE_SMBIOS_MAINBOARD_VERSION Kconfig item to enable requesting the EC for board version. BUG=b:114001972,b:114677884,b:114677887 Change-Id: Ib404a9da35156e197d232088fd7ca69432effbca Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Tested-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/28539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 10:31:50 +0000