summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2018-07-18mb/google/octopus/variants/baseboard: Udpate CPU critical tempSumeet Pawnikar
Observed thermal shutdown initiated by DPTF due to CPU temperature reaching critical temperature trip value. During stress testing with busty workloads like Octane, Aquarium on open yorp board with heat sink, sometime CPU temperature spikes till 99 degree Celsius and DPTF initiates system shutdown. With reference to previous APL/reef/coral platforms, this updates 105 degree Celsius for the CPU critical temperature trip value to avoid shutdown. This patch also updates power limit1 value to avoid the abrupt thermal shutdown by DPTF. BUG=b:79779737 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: Icd786d3c9b5f7c733dac3fd3e22579e2434058a6 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-18mainboard/google/Kahlee: Select low-power mode for WiFiSimon Glass
Put the PCIe clock pins in power-saving mode for the WiFi module to save power. Note: This currently does not appear to have any effect on grunt. BUG=b:110041917 BRANCH=none TEST=boot without this patch: $ iotools mem_read32 0xfed80e00 0x0046f3ff With this patch: $ iotools mem_read32 0xfed80e00 0x0046f3f1 Change-Id: I389815bc36b8610a30b0cbb9d73262ad392e0181 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/27465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-18mainboard/google/kahlee: Enable ASPM on PCI expressSimon Glass
We should use active-state power management where possible to reduce power consumption during normal operation. Enable these options. Linux does not seem to enable this for AMD, and the Intel code in coreboot does enable these options. PCIEXP_COMMON_CLOCK is enabled also, to follow how Intel does it. BUG=b:110041917 TEST=boot on grunt, see that WiFi and eMMC still run OK Change-Id: Ia7c711304ffe460a9fb0d4f654a51485958239ea Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/27464 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-18mb/google/octopus: Create meep variantJustin TerAvest
This creates a meep variant for octopus. The devicetree overrides are copied from yorp, otherwise everything just defaults to baseboard settings. BUG=b:111543000 TEST=None Change-Id: I791f8d1589d7323fbe884dddf0f9d7362a41b9ac Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27516 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17mb/google/atlas: Add MIPI camera ASL filesChen, Ping-chung
Atlas has one sensor, create a single endpoint to CIO2. Create power resource for enabling/disabling camera. BUG=b:111141128 Branch=None TEST=Testing on Atlas board Change-Id: Ide0e923bbc34f869dd0227c0a29977645bc5d58d Signed-off-by: Ping-Chung Chen <ping-chung.chen@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/27350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andy Yeh <andy.yeh@intel.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
2018-07-17mainboard/google/kahlee: Don't default backlight onMarc Jones
Keep the backlight off until it is needed. BUG=b:72694972 TEST=Backlight turns on at ChromeOS splash screen, not prior. Change-Id: Ia1aba787734e2976146ecd305dd821f0b326f0db Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-17mainboard/google/kahlee: Enable backlight on resumeMarc Jones
BUG=b:72694972 TEST=Backlight turns on ChromeOS resume Change-Id: I452e2ea94b508b137cf52301df5d2d1ad5c9ab70 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-17mainboard/google/kahlee: Enable backlight in SMI APMCMarc Jones
Enable the backlight in the OS callback to SMI for APMC. This keeps the backlight off until the OS is ready to display something. BUG=b:72694972 TEST=Backlight turns on at ChromeOS splash screen Change-Id: Idf32b1a3d45971883571a829a5c0c1f8563bb1f7 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-17mainboard/google/kahlee: Add mainboard resume functionMarc Jones
Add the mainboard resume function and __weak variant override. Change-Id: I808734208bd1ce81428771ea203709b53db56cd3 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-16google/grunt: fix thermal zone CPU temperature reportKevin Chiu
there are 3 thermal sensors and index is: 0: 1 Charger 1: 1 SOC 2: 0 CPU it needs to adjust sensor to index 2 to have correct CPU temperature. BUG=b:111284412 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I27afb6c5b64b0c39d6db15e6c61ea16a1fda1ca3 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-16mainboard/google/kahlee: Add support for Dediprog em100Simon Glass
This device claims to run at 75MHz with dual read, but it is not always reliable. Add an option to change the SPI flash speed to 16MHz, to avoid any problems. BUG=b:111363976 TEST=manually try to get my em100 running (it doesn't yet) Change-Id: I78d3d32c467aac82c72d31c773bfb0f69808aed4 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/27466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-16Kconfig: Make the EM100 config option commonSimon Glass
This applied to AMD devices as well as Intel, although the mechanism is different. Move the option to a common place. BUG=b:111363976 TEST=USE=em100-mode emerge-reef coreboot See that a message appears: * Enabling em100 mode (slow SPI flash) Change-Id: Iea437bdf42e7bc49b1d28c812bfc6128e3eb68bd Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/27467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-13mb/google/poppy/variants/nami: Use Pantheon VBTIvy Jian
Add new Pantheon sku-id for loading vbt-pantheon.bin BUG=b:78663963 BRANCH=firmware-nami-10775.B TEST=Boots to OS and display comes up. Check the board specific vbt binary loaded. Change-Id: I1ee156372754ac0e77caae5959a9ca9884de95f4 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27432 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-13mainboard/google/kahlee: Add more 3 SPD filesMartin Roth
BUG=b:111195311 TEST=Build grunt, verify SPDs are present Change-Id: Ief5ed5c3ca1d96b36926f1fc84c344a8d66dcda5 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/27437 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-12mainboard/google/nocturne: Update GPIO_FCAM_PWR_ENRicky Liang
The FCAM_PWR_EN gpio should be GPP_B4 according to the latest board schematics. Change-Id: Id926bd224b3392d8a61b6d8ae0509053afaa5b9e Signed-off-by: Ricky Liang <jcliang@chromium.org> Reviewed-on: https://review.coreboot.org/27433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tomasz Figa <tfiga@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-07-12soc/intel/braswell/acpi/dptf/thermal.asl: Make Thermal event optionalFrans Hendriks
Currently thermal event support can not be disabled at board level. Define and dependent code are placed in same file. Move define of HAVE_THERM_EVENT_HANDLER to mainboard file. Change-Id: Icb532e5bc7fd171ee2921f9a4b9b2150ba9f05c5 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/27415 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-12mb/google/octopus/variants/yorp: Enable TBMC deviceFurquan Shaikh
This change enables tablet mode ACPI device for yorp. BUG=b:111264961 CQ-DEPEND=CL:1132686 Change-Id: I81140b84a1adb5b21f1656fd89d953331e538f01 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-07-12mb/google/octopus: Enable TBMC device only for phaserFurquan Shaikh
Enabling of TBMC device on AP side requires corresponding support on the EC side as well. Since not all octopus variants have tablet mode support enabled, this change enables TBMC device only for phaser. BUG=b:111264961 Change-Id: I1ce181baa8ebaff0a9d767e97ddc256eef9789e8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-07-12mb/google/octopus/variants/bip: Enable EC SW syncFurquan Shaikh
This change enables EC SW sync for bip by removing GBB flag selection for disabling SW sync. BUG=b:110523189 TEST=Verified that EC SW sync works fine on bip. Change-Id: Iff8ee67fd682530a4fa82643cd1d00a645b347a3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-07-11skylake: Remove "IshEnable"li feng
Remove "IshEnable" from soc_intel_skylake_config since it's not used anymore. Enable/disable ISH by checking if ISH device is turned on or not. Refer to https://review.coreboot.org/#/c/coreboot/+/26485/. BUG=b:79244403 BRANCH=none TEST=Built. Change-Id: I4d2889af118659852431c87cb516fd19b577efc5 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-11mainboard/google/poppy/variants/atlas: config ISH in mainboard sideli feng
To enable ISH device on atlas board, change "device pci 13.0 off end" to "device pci 13.0 on end" in file mainboard/google/poppy/variants/atlas/devicetree.cb. "IshEnable" is not needed. Config atlas board specific ISH setting in devicetree.cb. Dynamically load gpio setting for ISH enabled/disabled cases. BUG=b:79244403 BRANCH=none TEST=Verified on Atlas board with ISH rework. ISH log showed on console. Change-Id: I8269a85cd2ab7917bfc0e7d63d988e0e678d0bf2 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-11google/kukui: Update MMU table in romstage and ramstageTristan Shieh
In order to get better performance, map dram as cached after dram ready in romstage. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui. Need a futher check after dram calibration code ready. Change-Id: Ie541fe08ee1d5b260abbabc0a5c18fb04e602b9c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27304 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11mediatek: Share MMU operation code among similar SOCsTristan Shieh
Refactor MMU operation code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: Id8173da0a02e57e863263fcd89c91a9c089e8a0f Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-11mainboard/google/kahlee: Update existing SPD filesMartin Roth
Add an extra space after 8th value on each line to make it easier to count the values. Update the empty spd to remove two random 0x80 values. BUG=None TEST=None Change-Id: If330dbf0c133f65aedddc58ecb351a80b0e45a05 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/27423 Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11mainboard/google/kahlee: Add additional SPDs for variantsMartin Roth
BUG=b:111079089, b:80375243 TEST=Build grunt, verify that SPDs are included. Change-Id: Idb03a3fa0842f7f89bb8c66dedbb8a0b293569be Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/27422 Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-06google/grunt: Update Raydium TS device ACPI nodesKevin Chiu
change I2C irq to EDGE trigger BUG=b:110962003 BRANCH=master TEST=emerge-grunt coreboot Raydium TS is working. Change-Id: Iff3acf4199d23b29dff209ec1c03a731679c6cbe Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27327 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-06mb/google/octopus: Enable tablet modeJustin TerAvest
This change configures ACPI to properly route notifications from the EC for tablet mode events to userspace. Relevant EC config changes are at: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1125261 BUG=b:111078678 TEST=With EC change, tablet mode detected by evtest and powerd Change-Id: Ifbc318186b195534f647f062544de4968aa87401 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-06mb/google/poppy/variants/nocturne: fix FPMCU IRQ sensitivityVincent Palatin
the FPMCU_INT_L on GPP_C11 is active low but the kernel irq handler is defined as IRQF_TRIGGER_LOW, so do not invert it twice. BRANCH=poppy BUG=b:78613978 TEST=On Nocturne, the 'cros_ec' IRQ count in /proc/interrupts does not increment wildly. Change-Id: I56c13c797b133dd22669a2299bcd16ef14eed335 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/27221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-06google: Use proper ACPI ID for Semtech chips: STHGwendal Grignou
Change-Id: I85cd567a923cccd2504f351aae276b5f0d9db4de Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Delco <delco@google.com> Reviewed-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-03mb/google/*: Remove selection of DRIVERS_PS2_KEYBOARDFurquan Shaikh
Until now, chromeec was doing keyboard initialization for the boards that have DRIVERS_PS2_KEYBOARD selected. However, coreboot does not leave the keyboard controller in a default reset state. This could result in payloads or OS failing to probe the controller as there could be stale data buffered in the controller during the handoff. Since the boards using chromeec already perform keyboard initialization in payload, there is no need to initialize the keyboard in coreboot too. This change gets rid of DRIVERS_PS2_KEYBOARD selection from all google mainboards using chromeec. BUG=b:110024487 TEST=Keyboard works fine after booting to OS even if user hits keys during BIOS to OS handoff. Change-Id: I1f49b060eb005c0f2b86f9d68d6758954eeb3cf0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27291 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02mainboard/google/nocturne: Enable IPU3Lijian Zhao
Enable Image Processing Unit and CIO2 device that constitute IPU3. BUG=None TEST=Build and boot up into Nocturne platform and check with lspci. Change-Id: Ic2edf5ec7bde5c55ce1b13cf7b680094a9fffc6a Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/27124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02mainboard/google/nocturne: Set camera power sequenceLijian Zhao
To make image sensor working, the intended power sequence need to applied. BUG=NONE TEST=NONE Change-Id: I4833c0e303174b297c1d193495e08e55d294a717 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/27094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02mainboard/google/nocturne: Enable camera sensorsLijian Zhao
Sensors and CSI2 receiver configuration for Nocturne platform. IMX355 module has VCM, NVM and is on the second port of receiver. IMX319 module has NVM and is on the first port of receiver. Change-Id: I37c877df8062d5c79e25ed27775ab58e977555db Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/26283 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02nocturne: Do not set 4 LSB of SX9310 CRTL0Gwendal Grignou
These bits start the acquisition process. They should only be set by the driver. BUG=b:74363445 TEST=compile Change-Id: I9e10f5570ac82124f7f4b5cc7aaad27da0c578be Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02nocturne: Fix casing for register definitionGwendal Grignou
Use lower case for hex values. BUG=b:74363445 TEST=compile Change-Id: I24afea58b1a791fac3c87ad397a696f7f6e0d127 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27264 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02mb/google/poppy/variants/nami: Perform PL2 setting for sonaJohn Su
According to sona thermal table, PL2 need to check cpu id. And then set PL2 value. BUG=b:110867809 TEST=The thermal team verify OK Change-Id: I5759fb3c685e3d4eef1be054541f950843d19874 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-06-29mb/google/poppy: Fix bytes 145-146 in nayna_dimm_NT6CL256T32CM SPDT.H. Lin
nayna/NT6CL256T32CM-H1 file change byte 145/146 to be"20" for JEDEC spec BUG=b:79443146,b:109708239 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test on R69.10825 with mosys Change-Id: Iadc820111f0aed34e5b46d7e23dff44cb5bb811d Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27275 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28nocturne: Fix uid and desc for sx9310Enrico Granata
This commit changes the uid and desc fields for the sx9310 entries in the devicetree to be unique, and correctly identify the position of the respective sensors. Change-Id: I501df7d3349fdebc9673c9815f5b1b2458abac6e Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
2018-06-28mb/*/*/cmos.layout: Fix coding styleElyes HAOUAS
Change-Id: I4f82482595b0e6c6159c6e1c66158bc18b061f04 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28mb/google/poppy/variants/nautilus: Use GPP_B20 to determine SKUSeunghwan Kim
We would use GPP_B20 instead of board id to determine nautilus SKU. BUG=b:80052672 BRANCH=poppy TEST=Verified the new coreboot could determine SKU correctly Change-Id: I1978b544eef7a184a3da191306ee32d862fa8c36 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27220 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28mb/google/octopus: Create bobba variantJustin TerAvest
This creates a bobba variant for octopus. The devicetree overrides are copied from fleex, otherwise everything just defaults to baseboard settings. BUG=b:110781720 TEST=None Change-Id: Ic30c6b0d955ce26f4a9f40cd7fef1c429ab950fc Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27223 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28mb/google/poppy/variants/nocturne: Update TSR sensor infoSumeet Pawnikar
This patch updates TSR sensor info with appropriate names. Also, updates Charger effect with correct TSR sensor mapping. BUG=None BRANCH=None TEST=Build coreboot for Nocturne board. Change-Id: Ia3bbc78f8d823e88a91265e0d55c5ac2a4ea31a9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-06-27mb/google/*: Add a few VBT filesMatt DeVillier
These files are directly extracted from the vendor firmware Change-Id: I1f05c913872c5d2d8c8279d89eac52fd4bf4e35e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-26cheza: Fix Kconfig TPM itemsT Michael Turney
TPM config items added upstream before ready SPI/TPM is not functional on Cheza yet Change-Id: I302e00014dc31279fe2574765763ecdbf326b449 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/27213 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-26mb/google/octopus: Enable logging of EC wake sources in S0ixFurquan Shaikh
This change adds GSMI callback elog_gsmi_cb_mainboard_log_wake_source to enable logging of EC wake events in S0ix. BUG=b:79449585 TEST=Verified that S0ix entry/exit events are added to eventlog: =========== Lid open ================ 62 | 2018-06-25 14:02:36 | S0ix Enter 63 | 2018-06-25 14:02:56 | S0ix Exit 64 | 2018-06-25 14:03:26 | Wake Source | GPE # | 15 65 | 2018-06-25 14:03:32 | Wake Source | GPE # | 65 66 | 2018-06-25 14:03:37 | EC Event | Lid Open Change-Id: Icc8cd3624966ff66d2cf189871e452cf650cec40 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27235 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25mb/google/kahlee/variants/grunt: Select low-power mode for BayHub720Simon Glass
Put the PCIe clock pins in power-saving mode for the BayHub eMMC bridge to save power. This requires use of an additional register (Misc control register 2) and another bit in the existing 'protect' register. The naming of bit 0 of that register is incorrect, based on the latest datasheet (14 June 2018) so fix that too. BUG=b:73726008 BRANCH=none TEST=boot without this patch: iotools mem_read32 0xfed80e00 0x0046ffff With this patch: $ iotools mem_read32 0xfed80e00 0x00463fff Also see that the PCIe clock stops when eMMC is idle and can be started by starting disk activity. Change-Id: I5ad1467b2e2e151215d2dfd2ce48cd4a451fe480 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/26515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-25mb/google/octopus: Use the newly added override devicetree featureFurquan Shaikh
Now that sconfig is able to support variant-specific override trees, this change updates octopus boards to use this feature. Following devices are moved from baseboard devicetree to variant specific devicetree: 1. Touchscreen 2. Trackpad 3. Digitizer 4. Audio codec BUG=b:80081934 TEST=Verified that the right devices show up in static.c for each variant. Change-Id: I8df0cdf4dbcd7613aa4ef4042c272eca2915da9e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27219 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25mb/google/poppy/variants/nami: Prevent leakage with touchscreen on PantheonCrystal Lin
We found GPP_C3 keeps high when system in S0ix mode. It caused 1.8V leakage. To fix this problem, add GPP_C3 into config for Pantheon Synaptics touchscreen. BUG=b:78436458 BRANCH=None TEST=Let DUT in S0ix mode and check GPP_C3 is normal. Change-Id: Idb2dab93178af1dae54265e49522b473b69a35af Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27177 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25mb/google/octopus/variants/baseboard: Update DPTF parametersSumeet Pawnikar
This patch updates DPTF parameters for Octopus baseboard. BUG=b:79779737 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I1456b7b9ee9e02491c66b0709c710e1a7ec08cc5 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-25mb/google/nami: Enable xDCIShelley Chen
This change enables xDCI controller on nami. BUG=b:110443736 BRANCH=None TEST=None Change-Id: Ieb63e0d65ac1a142c151a3f93afe306b80a5d99a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/27181 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-13 18:59:04 +0000