coreboot - Some coreboot project code with my work

Age	Commit message (Expand)	Author
2019-10-11	mb/google/hatch: Add new touchscreen option for Kohaku	Tim Wawrzynczak
2019-10-10	mb/google/octopus/variants/fleex: Update GPIOs to fix EMR	John Su
2019-10-09	soc/mediatek/mt8183: Run DRAM full calibration	Huayang Duan
2019-10-09	soc/mediatek/mt8183: Use cached calibration result for faster bootup	Huayang Duan
2019-10-09	mb/google/drallion: Enable UART console for arcada_cml and sarien_cml	Bernardo Perez Priego
2019-10-09	mb/google/hatch: Remove pen device for dratini/dragonair	Wisley Chen
2019-10-09	mb/[google/intel/lenovo]/*: fix posix shell bug with SPD files	Greg V
2019-10-09	mb/google/hatch: Set FPS as wake source	Shelley Chen
2019-10-08	mb/google/drallion: Add detect pin for Wacom touchscreen	Frank Wu
2019-10-08	mb/google/kohaku: Assign GPP_A19 as reset_gpio of stylus	Seunghwan Kim
2019-10-07	mb/google/hatch: Preserve MRC training data across FW update	Shelley Chen
2019-10-07	mb/google/octopus/variants/fleex: Adjust I2C0 CLK to meet spec	John Su
2019-10-04	mb/google/kukui: Extend FMAP to 8MB layout	Hung-Te Lin
2019-10-03	mb/[google/intel]/*: Specify Chrome EC bus - LPC or ESPI	Martin Roth
2019-10-02	mb/google/drallion: Disable GBE in firmware for drallion variants	Thejaswani Putta
2019-10-02	soc/intel: Replace config_of_path() with config_of_soc()	Kyösti Mälkki
2019-10-02	mb/google/drallion: Dynamicly disable memory channel	Eric Lai
2019-10-02	mediatek/mt8183: Rename fields of struct sdram_params	Yu-Ping Wu
2019-09-30	mb/google/drallion: Clean up devicetree config	Aamir Bohra
2019-09-30	mb/google/drallion: Configure LPSS controller parameters	Aamir Bohra
2019-09-30	mediatek/mt8183: Init SPM driver	Dawei Chien
2019-09-30	mb: remove test-only HWIDs	Hung-Te Lin
2019-09-30	mb/google/drallion: Adjust GPD3 pin termination	Bora Guvendik
2019-09-30	mb/google/drallion: De-assert WWAN reset signal	Aamir Bohra
2019-09-28	mb/google/variants/drallion: Update the spd index map	Aamir Bohra
2019-09-28	mb/google/drallion: Set UART for console to UART controller 0	Aamir Bohra
2019-09-26	mb/mainboard/hatch: support elan touchpad for Akemi	Peichao Wang
2019-09-26	google/grunt: add new two DDR source for Treeya	Peichao Wang
2019-09-25	mb/google/kukui: Add new build target 'Juniper'	Hung-Te Lin
2019-09-25	mb/google/hatch: Move SOC_INTEL_COMETLAKE selection to Kconfig	Furquan Shaikh
2019-09-24	mb/google/kohaku: Update DPTF parameters and TCC offset setting	Seunghwan Kim
2019-09-22	mb/mainboard/hatch: add spd: 8G_3200 for Akemi	Peichao Wang
2019-09-22	mb/google/hatch: Add G2Touch Touchscreen support	Wisley Chen
2019-09-20	mb/google/hatch: Remove GPIO_DRIVER from pen eject GPIO configuration	Tim Wawrzynczak
2019-09-20	mb/google/hatch: override smbios manufacturer name from CBI	Wisley Chen
2019-09-19	mb/google/drallion: add sku id base on sensor detection	Eric Lai
2019-09-19	mb/google/drallion: Add memory init setup for drallion	Thejaswani Putta
2019-09-18	mb/google/hatch/variants/helios: Add DPTF control for ambient sensor	Sumeet Pawnikar
2019-09-18	mb/google/hatch/variants/helios: Update DPTF parameters	Sumeet Pawnikar
2019-09-18	mb/google/octopus/variants/garg: add LTE sku to config power sequence	Kevin Chiu
2019-09-18	mb/google/drallion: Add SPD files for drallion	Amanda Huang
2019-09-18	mb/google/drallion: Enable 360 sensor detection	Bernardo Perez Priego
2019-09-18	mb/google/drallion: Update gpio config for drallion	Varun Joshi
2019-09-17	google/kukui: Pass reset gpio parameter to BL31	Tristan Shieh
2019-09-16	src/mainboard: Remove unused include <device/pci_ops.h>	Elyes HAOUAS
2019-09-16	mb/google/kohaku: Update USB port settings	Seunghwan Kim
2019-09-15	src/mainboard: Remove not used #include <elog.h>	Elyes HAOUAS
2019-09-14	arm64: Uprev Arm TF and adjust to BL31 parameter changes	Julius Werner
2019-09-13	mb/google/hatch: Merge emmc_sku_gpio_table and gpio_table to one table	Peichao Wang
2019-09-13	mb/google/drallion: Use arcada_ish.bin for arcada_cml	Selma BENSAID