Age | Commit message (Collapse) | Author |
|
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal Shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device (B0: D20: F2) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Sarien.
Change-Id: Ibc336be0523ff4e65a818474907faf20fc417ff4
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device(B0: D18: F0) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Arcada.
Change-Id: I1915b974b10638b0f6ab97c6fb9b7a58d2cabc59
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There was the potential for misuse of the override early GPIO table,
because if the override early GPIO table did not have a corresponding
entry in the base table, it would not get overridden, and there was
no way to know except manual inspection (this has already happened
here), so now all hatch mainboards are required to explicitly list out
all of their required early GPIOs.
TEST=booted several hatch boards, verified that they can communicate
with TPM and successfully train memory
Change-Id: I0552b08a284fd6fb41a09fef431a0d006b0cf0bd
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
The pinctrl driver in the linux kernel automatically turns off SCI
routing for all GPIOs exported via ACPI, so this patch sets up
dual-routing of the EMR_GARAGE_DET signal so that one can be used
for IRQs and one for the SCI wake.
Change-Id: Iadeb4502c5a98a72ba651bdcad626609656c196f
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34780
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The touchscreen controller was never added to the device tree, and the
next board rev will have this IC connected. Set it up in the device tree
with conservative power resource timings from the datasheet.
BUG=b:138869702
BRANCH=none
TEST=compiles; current board rev does not have touch IC
Change-Id: I759fb32f31c8eee0e6bd664c6a82308354ef5d08
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enabling stylus pen device and pen_eject event.
- Adding enable_gpio for power sequencing
- Configuring GPP_H4 and GPP_H5 as native function
- Adding PENH device node for pen ejection event
BUG=b:137326841
BRANCH=none
TEST=Verified pen input operation and pen_eject event (pop-up and wake
from s0ix on pen ejection)
Change-Id: Ic252a1f90c0fc6cb9b1e426d75a8b503824681f3
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Vortininja needs different SAR values than meep. Use sku-id to load SAR values.
BUG=b:138261454
BRANCH=octopus
TEST=build and verified SAR values by sku id
Change-Id: I7b3ab51e1d6cada4faaba1b9d72bd9eacf6b04dd
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
This patch makes SPKR_PA_EN PIN output and high for boot beep
to work in pre-os environment.
BUG=b:135104721
BRANCH=NONE
TEST=Boot Beep is working with required ALC1011 depthcharge code
changes.
Change-Id: I012462f93e9e2bcafe5f18ce7d04e3fcd1db9ffa
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
|
|
The device Vortininja uses the variant meep, and supports WACOM/EMRIGHT
digitizer.
BUG=b:138276179
BRANCH=octopus
TEST=verified that WACOM/EMRIGHT digitizer can works.
Change-Id: I2bed4edb0261953f122f1d9ccca1fe4fa9406b33
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Drallion is a new mainboard using Intel Comet Lake SOC. As a starting
point, I took mainboard/sarien as the reference code and modified WHL
to Comet Lake.
BUG=b:138098572
Test=compiles
Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com>
Change-Id: I541952a4ef337e7277a85f02d25979f12ec075c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34497
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Increase reset delay to 120ms of touchscreen to meet wacom touchscreen
T4 specification and resolve re-bind hid over i2c driver failed after
touchscreen firmware auto update.
BUG=b:132211627
TEST=Stress touchscreen firmware auto update 200 times and not found
re-bind driver failed.
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I488660aefdc6df27077efc7fec2f3b99adbaef9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Hsieh <mike_hsieh@wistron.corp-partner.google.com>
Reviewed-by: Nick Crews <ncrews@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
After adjustment
Touch Pad CLK: 383.4 KHz
Touch Screen CLK: 381.6 KHz
Audio codec CLK: 386.0 KHz
TouchPad SDA hold time: 0.325ns
BUG=b:137722634
BRANCH=none
TEST=emerge-hatch coreboot chromeos-bootimage
Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I27dec2f3e00eb6618cc429aff3dae7a5d937d638
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
droid/blorb needs to use different SAR values than bobba. Use sku-id to load the SAR values.
BUG=b:138091179
BRANCH=octopus
TEST=build and verify SAR load by sku-id
Change-Id: I71b5d69ffbba82018a682202df73b604332dd9e7
Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34542
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BRANCH=none
BUG=b:138152075
TEST=Build for cometlake board with the PmTimerDisabled policy in
devicetree set to 1.
With PmTimerDisabled = 0
>> iotools mmio_read8 0xfe0018fc
0x00
With PmTimerDisabled = 1
>> iotools mmio_read8 0xfe0018fc
0x02
Bit 1: ACPI Timer Disable (ACPI_TIM_DIS): This bit determines
whether the ACPI Timer is enabled to run.
- 0: ACPI Timer is enabled
- 1: ACPI Timer is disabled
Change-Id: I83f49505a804c99d7978e5d541ea9fe8ead9b88f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Add rise time / fall time to I2C config in device tree to ensure I2C
CLK runs accurately at I2C_SPEED_FAST (400 kHz).
BUG=b:138258384
BRANCH=none
TEST=probe I2C0/I2C2/I2C3 SCL on Kohaku board, verify all of them run
at 395-399 kHz.
Change-Id: Id98079e717f0db3fdcb88f85e45693925d11d7fd
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34559
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ports CB:34522 and CB:33147 changes from CNL to ICL.
TEST=Build and boot dragonegg
Change-Id: I0b983005f16fe182e634eac63fef4f6b22197a85
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34649
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures skylake soc is using common thermal code
from intel common block.
TEST=Build and boot soraka
Change-Id: I0812daa3536051918ccac973fde8d7f4f949609d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34648
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Moving these to bootblock as we are seeing some instances where
devices are rebooting into the recovery broken screen with the 0x5a error (no
bootable storage device in system). This needed to be done for KBL
platforms and never got transferred to hatch.
Please reference https://review.coreboot.org/c/coreboot/+/23647
BUG=b:137681648
BRANCH=None
TEST=Run autotest faft_bios and faft_ec suites
Change-Id: I8cf09c26d77d890f5d0490709504e9edf485a93f
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34484
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Applying first tuned DPTF parameters and TDP PL1/PL2 values for kohaku.
More fine-tuning will happen later.
BUG=b:1704071
BRANCH=none
TEST=build
Change-Id: I8a87ff88e8e14ada473f9da59c15cdc779cbb108
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34397
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal Shutdown
when S0ix is enabled.
BUG=133345634
BRANCH=None
TEST=Verified Thermal Device (B0: D20: F2) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Hatch.
Change-Id: Ib20fae04080b28c6105e5a187cc5d7a55b48d709
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33147
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:80501386,b:117254947
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: I478e06686158dd77b075bcef8a41763ae26c79f9
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31521
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The device Dorp uses the variant Meep, and supports HDMI.
-sku33 (HDMI)
-sku34 (HDMI + keyboard backlight)
-sku35 (HDMI + Touchscreen)
-sku36 (HDMI + keyboard backlight + Touchscreen)
BUG=b:136522841
BRANCH=octopus
TEST=emerge-octopus coreboot
Change-Id: I59ba2e56cf2f83ca9d533454570bcdd39c0a2e7c
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34509
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For dorp HDMI sku, select VBT which enables HDMI output.
-sku33 (HDMI)
-sku34 (HDMI + keyboard backlight)
-sku35 (HDMI + Touchscreen)
-sku36 (HDMI + keyboard backlight + Touchscreen)
Cq-Depend: chrome-internal:1502253
BUG=b:136522841
BRANCH=octopus
TEST=emerge-octopus coreboot
Change-Id: I62262378f85bb899073ffac7804be876e649e429
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
This patch enables lockdown configuration for hatch family (hatch,
kindred, helios and kohaku)
BUG=b:138200201
Change-Id: Ia6dc90156dc76fde490b25cf833da3cf80f664f2
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change adds a user selectable option to enable all WiFi SAR
configs that apply to hatch.
BUG=b:138177048
Change-Id: I4b72f90896841e7c556d4a1b8cdad8ca89d01021
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Dorp device support keyboard backlight, so enable it.
BUG=b:138413969
BRANCH=octopus
TEST=emerge-octopus coreboot
Change-Id: If0c7b22b4be2a5d5216404a6944ac887883e9a47
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Marco Chen <marcochen@google.com>
|
|
Based on updated schematics, change polarity of USI_INT, and add
the reset and enable GPIOs to the touchscreen ACPI node. The stop
GPIO can't be used with the current implementation of _ON, as the
way it's wired will cause power sequencing to fail.
BUG=b:137133194, b:138240502
BRANCH=none
TEST=Compiles, don't have next board rev to test with
Change-Id: I1dfb8e649418e4c5e9b897fb4bc11393adc21ea2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
add two sku ids of bard:
0x1009CE0
0x1009CE2
BUG=b:137892804
TEST=emerge-nami coreboot
Change-Id: I299ccb36739d83e38f37e0b2cbba44c34343c975
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use explicit simple PCI config accessors here.
Change-Id: Ifa3814fdd7795479ca5fdbfc4deb3fe8db9805f3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable I2C0 in fleex then verify EMR function successfully
BUG=b:135968368
BRANCH=octopus
TEST=EMR function working normally with I2C0 in Grob360S.
Change-Id: I784ff32418bc839bcec14fbfd7236f708828690e
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=b:136606255
Change-Id: I8fa29dc96e7a066f6708ede6b7bee2382c7008cb
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Support SANDISK SDADA4CR-128G, SAMSUNG KMDP6001DA-B425, KMDV6001DA-B620
EMCP LPDDR4X DDR bootup.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on EMCP DRAM
Change-Id: I7de4c9a27282d3d00f51adf46dcb3d2f3984bfff
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
The 'Jacuzzi' is a different base board that will share most of Kukui
design. For AP firmware, there will be only a few changes expected,
mostly in display (for MIPI bridge) and EC/keyboard so we want to create
it as variants inside Kukui folder, not forking a new directory.
BUG=b:137517228
TEST=make menuconfig; select 'krane' and build; select 'jacuzzi' and build.
Change-Id: Ic2b04e01628dc3db40f79f9bbdd5cc77d9466753
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34344
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We do not want to disguise somewhat complex function
calls as simple macros.
Change-Id: I298f7f9a1c6a64cfba454e919eeaedc7bb2d4801
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Hatch_whl variant is deprecated.
BUG=b:137180390
Change-Id: I88fa201398ad5fb70da48d022f1ae86fecafa660
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34432
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is based on the grunt variant.
BUG=b:135551210
BRANCH=none
TEST=emerge-grunt coreboot chromeos-bootimage
Ensure that image-treeya.*.bin are created
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I40f3c9de87350777b02dd91d8c5b9dbe2eb9f6b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change provides an implementation of variant_devtree_update() for
kindred that disable eMMC controller when SKU ID = 1 or 3
BUG=b:132918661
TEST=Verify eMMC is disabled when SKU ID = 1 or 3
Change-Id: I8ccb4dae54f223881e0ced9e034bf45b994cc6f2
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=None
TEST=emerge-hatch coreboot chromeos-bootimage
Change-Id: I217e13acd337034554ff055e8bf5011558d1f8bf
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change adds support for variant_devtree_update()
that allows variant to update device tree.
BUG=None
TEST=emerge-hatch coreboot chromeos-bootimage
Change-Id: I0e9ad360b6c02c83fe49387ce7bc66d56448ffb9
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
We would like to wake eve up in suspend from an MKBP event. This commit
simply enables MKBP events to wake the system in suspend using the
existing host event interface. There is an accompanying series of
patches in the EC firmware for eve that will allow a MKBP wake mask to
be configured.
BUG=chromium:786721
BRANCH=firmware-eve-9584.B
TEST=Build and flash eve, generate MKBP events on the EC and verify
that the system wakes up in suspend.
Change-Id: I75b05c83a4204d55df11589299a7488d04bbd073
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34454
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable unused USB devices in the device tree so that the concerned ACPI
objects do not get exported to the OS.
BUG=b:133513961
BRANCH=octopus
TEST=Boot to ChromeOS. Ensure that the USB devices are disabled based
on port status and the concerned ACPI objects are not exported.
Change-Id: I0faccdfb8a9df9ec52130437433b15973e3d6f1a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add devicetree configuration for USB devices so that USB Port
Capabilities (_UPC) and Physical Location of Device (_PLD) ACPI objects
can be exported to the OS.
BUG=b:133513961
BRANCH=octopus
TEST=Boot to ChromeOS. Ensure that the _UPC & _PLD ACPI objects are
exported for the configured USB devices in the SSDT table.
Change-Id: I832ffe305d256296b7447035c5e5dcafb7c296d9
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
We would like to wake nocturne up in suspend from an MKBP event. On
Nocturne, MKBP events are notified to the host via a GPIO from the EC,
EC_INT_L. However, the AP cannot wake from suspend from this GPIO.
Therefore, we'll use the host event interface to wake the system
instead.
This commit simply enables MKBP events to wake the system in suspend.
BUG=chromium:786721
BRANCH=firmware-nocturne-10984.B
TEST=Build and flash nocturne, generate MKBP events on the EC and verify
that the system wakes up in suspend.
Change-Id: I6aff4d38051c939257533229fd0085e42c01d02f
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The processor P_BLK doesn't support throttling. This behaviour could be
emulated with SMM, but instead just update the FADT to indicate no support
for legacy I/O based throttling using P_CNT.
We have _PTC defined in SSDT, which should be used in favour of P_CNT by
ACPI aware OS, so this change has no effect on modern OS.
Drop all occurences of p_cnt_throttling_supported and update autoport
to not generate it any more.
Change-Id: Iaf82518d5114d6de7cef01dca2d3087eea8ff927
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch configures GPIO pin GPP_G7 as NF1 with internal pull down.
As per schematics SD host controller SD_WP pin is not connected to
uSD card connector. Configured gpio pin as NF1 with internal pull down
in order to overcome gpio default state in hatch which makes SoC
SD_WP pin is enable.
BUG=b:137729527
BRANCH=None
TEST=Able to write/read data to/from sd card after mounting card device.
Change-Id: I0187267670e1dea3e1d5e83d0b29967714d6065e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34396
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Following changes are done to enable ALC1011 codec on Helios
1. ACL1011 4 devices to I2C4
2. GPIO H13 is set to GPO as per schematics
Verified SSDT table and i2cdetect from kernel.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Change-Id: I0d71e3bd2d4493d059a33023c1afe1b630181d4f
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
We do not want to disguise somewhat complex function
calls as simple macros.
Change-Id: I53324603c9ece1334c6e09d51338084166f7a585
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34299
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Guckian
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change provides an implementation of variant_memory_sku() for
helios that overrides memory ID 3 and 4 to 0 and 1 to workaround the
incorrect memory straps in hardware for board id 0 and unknown.
BUG=b:133455595
Change-Id: I38fab1f91decac5d0a146e5a6c74e88f677af305
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
This change adds support for variant_memory_sku() that allows variant
to return memory SKU ID. Current implementation of memory_sku() is
renamed to weak implementation of variant_memory_sku(). Functionally
this change should be the same as before for all hatch variants. This
function will be overriden by helios in a follow-up CL.
BUG=b:133455595
Change-Id: I509c263ec08e0060c12ef1ea9fed673f1e3f3a41
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Autoport generates these structures as static so let's make it consistent.
See also commit 128205fd with Change-Id
I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 ("autoport/bd82x6x.go: Improve
gpio.c generation").
Change-Id: I4e07bd755ca4a65b76c69625d235a879fe7b43cb
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33524
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|