summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2015-04-15veyron: Turn off SD card power in romstageJulius Werner
The only way to reliably reset an SD card in an unknown state is by power-cycling. Since a kernel may crash and reboot at any point, SD cards may be left in one of them fancy high-throughput modes that depthcharge (or, in fact, a newly booting kernel without prior knowledge) doesn't support, so we need to reset the card on every boot. This patch adds support to turn off an RK808 regulator completely and uses that to turn off SD card power rails in early romstage. The time until configure_sdmmc() in ramstage turns them back on should be more than enough to drain the power rail for an effective power-cycle. BRANCH=None BUG=chrome-os-partner:34289 TEST=Booted a Pinky from SD card, noticed that it works before and after this patch. Change-Id: Iaa5f7adaa59da69a964785c5e369ad73c6620224 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 95fba21907f1f3f686cb5a95b993736247db8f96 Original-Change-Id: I904b2d23ca35f765c000f9bee7637044f674eff9 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/233713 Original-Reviewed-by: Alexandru Stan <amstan@chromium.org> Original-Tested-by: Alexandru Stan <amstan@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9626 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-14storm: do not enable the ethernet switch by defaultVadim Bendebury
The ethernet switch, as soon as it is taken out of reset comes up in default (bridging) mode, which allows traffic to flow freely across the ports. Let's keep it in reset such that there is no cross port traffic happening while the device boots up. BRANCH=storm BUG=chrome-os-partner:32646 TEST=verified that the switch is held in reset during boot. Change-Id: Ia1dbb47d892d564145da17425a596bf9bad40d29 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 50551d8c9a44d1b63e0948070f6573adf7729d37 Original-Change-Id: I6bf698beddc98ce18fee6b3b39622e356c8cfbad Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/224989 Original-Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Reviewed-on: http://review.coreboot.org/9465 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14samus: Declare TPM in devicetree.cb and include ACPI deviceDuncan Laurie
This adds the TPM device to the devicetree and configures an active high edge triggered interrupt at IRQ10 and adds the ACPI Device for the TPM into the DSDT. It also cleans up the EC PNP ID to use the EISAID for an EC since there are now two PNP devices declared, and removes the unused ENABLE_TPM define at the top of the DSDT. BUG=chrome-os-partner:33385 BRANCH=samus TEST=build and boot on samus, ensure TPM is functional at IRQ10 CQ-DEPEND=CL:226661 Change-Id: I4b9b016014d136fbf9a37003003632821ae93a53 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 0420e27b05d0f1568efa9beb849e0e8ff5995c86 Original-Change-Id: I2660cb30ac535da0b255603a619b9c09681ca947 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/226663 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14wtm2/samus: fix coreboot compilation error with tpmp removedHarry Pan
Since CL:226662, all TPMP accessing should be removed as well, else it will cause wtm2 coreboot failed on build. BUG=none BRANCH=none TEST=./setup_board --board=fox_wtm2 && emerge-fox_wtm2 coreboot CQ-DEPEND=CL:226662 Change-Id: Ib25f2d32997ef82b0ebf049803f2c5002a0a3abf Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: c99456bf42544518e2a36b6e0bbfe7f4ee1b4aff Original-Change-Id: Ia0eebb1924bbb23979c880f7d05600a0cf1e4ca3 Original-Signed-off-by: Harry Pan <harry.pan@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/232165 Original-Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/9477 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: increase drive strength for SPIM1 MFIOsIonela Voinescu
This change is made only to make sure there is a good signal strength on the SPIM lines. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: I5b9427b14a407746fb5b707fa3b07a1a6774bfb1 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: e9d953283a5b43bf967128ca73db0e90c2df32df Original-Change-Id: Ia589134cf0557613697d49fb0bdb1848af66f0e8 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/249732 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9675 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: setup I2C0 clock and MFIOsIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: Ic805311d3aaf40da601c88cd05a73254088374bd Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: ad9427c069ed34ab91e93df59ec3361499b54982 Original-Change-Id: If8e142273afd2d591a975f4e7e34aa73e8d71b0c Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/250451 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9674 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: Reduce MIPS PLL jitterIonela Voinescu
The current MIPS PLL is configured in such a way that there is excessive jitter. Correct this by applying new PLL settings. The resultant frequency is 546MHz instead of 550MHz. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board as part of the JTAG loading script; BRANCH=none Change-Id: Ica1bfff29e01819b86cd2bb8b18d8adc9dfa3260 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 0c04354b49b73d234492521d81b6600d487175b0 Original-Change-Id: I28b41b1e82dbdf9da21bf0ab74f9722cdad923f1 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/245620 Original-Reviewed-by: James Hartley <james.hartley@imgtec.com> Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-on: http://review.coreboot.org/9671 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: add clock setup for MIPS CPU, ROM and EthernetIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: Ie386d6af9eeba7a72b1b88d515e6cb1821569c6b Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: d4b8d8b6f965296f9ecf62da8e5f383c3667b077 Original-Change-Id: I9eb464340b0475ae735ba5573ab0841dac0d74eb Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243215 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9669 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: remove call to printk before UART is initializedIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested in Pistachio bring up board; previous delay at the beginning of bootblock is fixed. BRANCH=none Change-Id: I30335677c96bfd651bc49e36b562c48588009d67 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 3d1eb117644af1323dd940e0a82a2ef44025d5b9 Original-Change-Id: I122df1f985163836bb2ddd027ef6ab2ce265d5dd Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243223 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9668 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: Configure clocks and MFIOsIonela Voinescu
Set elements: - UART1 clock dividers and MFIOs - SPIM1 clock dividers and MFIOs - USB clock dividers - System clock divider - System PLL - MIPS CPU PLL BUG=chrome-os-partner:31438 TEST=tested on Pisachio bring up board; UART, SPI NOR, SPI NAND, and USB have proper functionality. BRANCH=none Change-Id: Ib01186a652fd59295a4cafc3ca99b94aa9564f74 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 65e68d82f34bb40ef3cfb397ecf5df0c83201151 Original-Change-Id: Ia2c31bbbfc020dc4fd71c72b877414adfdfc42a8 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241423 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9662 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14rush: Configure display related clock, pad, and powerJimmy Zhang
BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush Change-Id: I9c2235ccc5571f1919dc013c62488390fe31dcbc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7468c14842c680be81620ad3fd2ea9ae056d525f Original-Change-Id: Iaf7f70727fc914b9bb2d063c9a30ece4451d40da Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238942 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14rush: devicetree: Define default dp panel parametersJimmy Zhang
DP panel parameters generally can be retrieved thru edid. The parameters specified here will be used when edid fetching failed. BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush and ryu Change-Id: I39e25c873561f75394408f6635aaa2e88b67d846 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c02facb9753de08f66f3ae40d7dca1eba50febc5 Original-Change-Id: I4785eca3ec03b48e8780ebf02389e9b46317e96d Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238941 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9612 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14timer: Reestablish init_timer(), consolidate timer initialization callsJulius Werner
We have known for a while that the old x86 model of calling init_timer() in ramstage doesn't make sense on other archs (and is questionable in general), and finally removed it with CL:219719. However, now timer initialization is completely buried in the platform code, and it's hard to ensure it is done in time to set up timestamps. For three out of four non-x86 SoC vendors we have brought up for now, the timers need some kind of SoC-specific initialization. This patch reintroduces init_timer() as a weak function that can be overridden by platform code. The call in ramstage is restricted to x86 (and should probably eventually be removed from there as well), and other archs should call them at the earliest reasonable point in their bootblock. (Only changing arm for now since arm64 and mips bootblocks are still in very early state and should sync up to features in arm once their requirements are better understood.) This allows us to move timestamp_init() into arch code, so that we can rely on timestamps being available at a well-defined point and initialize our base value as early as possible. (Platforms who know that their timers start at zero can still safely call timestamp_init(0) again from platform code.) BRANCH=None BUG=None TEST=Booted Pinky, Blaze and Storm, compiled Daisy and Pit. Change-Id: I1b064ba3831c0c5b7965b1d88a6f4a590789c891 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ffaebcd3785c4ce998ac1536e9fdd46ce3f52bfa Original-Change-Id: Iece1614b7442d4fa9ca981010e1c8497bdea308d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234062 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9606 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstoolJulius Werner
Some projects (like ChromeOS) put more content than described by CBFS onto their image. For top-aligned images (read: x86), this has traditionally been achieved with a CBFS_SIZE Kconfig (which denotes the area actually managed by CBFS, as opposed to ROM_SIZE) that is used to calculate the CBFS entry start offset. On bottom-aligned boards, many define a fake (smaller) ROM_SIZE for only the CBFS part, which is not consistently done and can be an issue because ROM_SIZE is expected to be a power of two. This patch changes all non-x86 boards to describe their actual (physical) ROM size via one of the BOARD_ROMSIZE_KB_xxx options as a mainboard Kconfig select (which is the correct place to declare unchangeable physical properties of the board). It also changes the cbfstool create invocation to use CBFS_SIZE as the -s parameter for those architectures, which defaults to ROM_SIZE but gets overridden for special use cases like ChromeOS. This has the advantage that cbfstool has a consistent idea of where the area it is responsible for ends, which offers better bounds-checking and is needed for a subsequent fix. Also change the FMAP offset to default to right behind the (now consistently known) CBFS region for non-x86 boards, which has emerged as a de-facto standard on those architectures and allows us to reduce the amount of custom configuration. In the future, the nightmare that is ChromeOS's image build system could be redesigned to enforce this automatically, and also confirm that it doesn't overwrite any space used by CBFS (which is now consistently defined as the file size of coreboot.rom on non-x86). CQ-DEPEND=CL:231576,CL:231475 BRANCH=None BUG=chromium:422501 TEST=Built and booted on Veyron_Pinky. Change-Id: I89aa5b30e25679e074d4cb5eee4c08178892ada6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e707c67c69599274b890d0686522880aa2e16d71 Original-Change-Id: I4fce5a56a8d72f4c4dd3a08c129025f1565351cc Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229974 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9619 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13storm: Fix timer init order problemJulius Werner
Commit 257aaee9e3a (arm: Add bootblock_mainboard_early_init() for pre-console initialization) inadvertently moved the timer initialization after console initialization for IPQ806x, which is apparently not a good idea for this platform. This patch solves the issue by moving init_timer() to bootblock_mainboard_early_init(), which is the new hook explicitly provided to perform pre-console tasks. BRANCH=None BUG=None TEST=Built and booted Storm with 257aaee9e reverted. Noticed that it was already broken. Bisected coreboot and tracked down breakage to commit a126a62f (ipq8064: use the new utility to build bootblock). Built and booted successfully with this patch and a revert of a126a62f to confirm that the bug in question here is fixed. Change-Id: I4a3faa2aec8ff1fbbe6c389f1d048475aa944418 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 752d1f879f9bd841f18bd84842491f747458cf52 Original-Change-Id: Ie4aa2d06cb6fda6d5ff8dd5ea052257fb7b8a24b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/233290 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9574 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13storm: add hard_reset templateDaisuke Nojiri
this is required to do early firmware selection using vboot2. actual implementation can be done later. BUG=chrome-os-partner:33755 BRANCH=ToT TEST=Booted storm. Change-Id: I8e9e168ea6fa3af149d5ad4ca51c5c9bba4d986d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 611c24773478c8c212d567bb4f2cb9a09898ddc8 Original-Change-Id: Idd1a1de4991a19902ffe45f01be89d47f4413779 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229425 Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13rk3288: Move UART initialization to bootblock_mainboard_early_init()Julius Werner
This patch uses the new bootblock_mainboard_early_init() hook to run the UART pinmuxing on rk3288-based boards before initializing the console. This allows us to get rid of the hacky second console_init() call in bootblock_soc_init(). We can also simplify the pinmux selection a bit since we know that a given board always uses the same UART (still keep an assert around to be sure, though). BRANCH=None BUG=chrome-os-partner:32123 TEST=Booted on Pinky. Change-Id: I3da8b0e4bd609f33cedd934ce51cb20b1190024b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: caabda8fc1ddb4805d86fd9a0d5d2f3cf738bfaf Original-Change-Id: Ia56c0599a15f966d087ca39181bfe23abd262e72 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231942 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9604 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13arm: Add bootblock_mainboard_early_init() for pre-console initializationJulius Werner
On most platforms, enabling the console and exception handlers are amongst the very first things you want to do, as they help you see what's going on and debug errors in other early init code. However, most ARM boards require some small amount of board-specific initialization (pinmuxing, maybe clocks) to get the UART running, which is why bootblock_mainboard_init() (and with it almost all of the actual bootblock code) always had to run before console initialization for now. This patch introduces an explicit bootblock_mainboard_early_init() hook for only that part of initialization that absolutely needs to run before console output. The other two hooks for SoC and mainboard are moved below console_init(). This model has already proven its worth before in the tegra124 and tegra132 custom bootblocks. BRANCH=None BUG=chrome-os-partner:32123 TEST=Booted on Pinky. Compiled for Daisy, Storm and Ryu. Change-Id: I510c58189faf0c08c740bcc3b5a654f81f892464 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f58e84a2fc1c9951e9c4c65cdec1dbeb6a20d597 Original-Change-Id: I4257b5a8807595140e8c973ca04e68ea8630bf9a Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231941 Reviewed-on: http://review.coreboot.org/9603 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13rush: Add and select DO_SOR_INIT config optionJimmy Zhang
Select DO_SOR_INIT to enable dp display api BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Change-Id: Iddf19195722856865a7c06ce96492012ab729184 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 31492f51c030aeb7a3ac792a02665642ec999405 Original-Change-Id: I4daca43239235ca6d233c4457096d3b98fcaf65c Original-Reviewed-on: https://chromium-review.googlesource.com/234274 Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com> Reviewed-on: http://review.coreboot.org/9586 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13ryu: Add and select DO_DSI_INIT config optionJimmy Zhang
Enable display supporting functions by select DO_DSI_INIT BUG=chrome-os-partner:34336 BRANCH=none TEST=build ryu and rush Change-Id: Ie0e03506702ddab03d7f3fd2528c67c02126c7be Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 7133dfcd1afa221be92c6398221cf210d9eddf17 Original-Change-Id: I3a9f93107333ebf83ff235eb1b1e02fc747df3c6 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234272 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9585 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13ryu: display: Move display api to mainboardJimmy Zhang
Display configuration is board specific. The change here is preparing for supporting other than dsi interface. BUG=chrome-os-partner:34336 BRANCH=none TEST=build ryu and test dev/rec mode, also build rush ok Change-Id: Ied39d5d539d2be4983ab70976bffbe51fccba276 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 36be6b2e35c6246d5384d71b9ab9d4ddbf17764a Original-Change-Id: I494a04f7d6c0dbad2d472f4c2cd0aabfb23b8c97 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234271 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9584 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13ryu: display: Split dc functions from dsi display codeJimmy Zhang
dc supporting functions can be used for other than dsi display interfaces. This change is preparing for supporting sor display interface. BUG=chrome-os-partner:34336 BRANCH=none TEST=build ryu and test dev/rec mode, also build rush ok Change-Id: I8a310e188fae70d7726c4360894b392c4546e105 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: a7ab7225e3419a0fd93894dbb9a959390f29945b Original-Change-Id: Id14cbd89457cb91c23526927a432f4eb7cc6291b Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234270 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9583 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13ryu: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
This configures I2S1 and the codec MCLK muxes to pass the PCM audio data to the RT5677 codec. Once depthcharge RT5677 codec driver changes are in, audio 'beeps' should be heard on boot (Ctrl-U / devmode/recmode). BUG=chrome-os-partner:32582 BRANCH=none TEST=Built and booted Ryu/A44. Change-Id: I2143d544c75ee7e03ffc809561171920650e8d7d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 600c12ddf3543d2dcb47fd3e2f0704803dac5957 Original-Change-Id: Ib071bcb41fba8f6d628a386ed233ec84a54b0323 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233945 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9580 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13rush: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
With this change, audio 'beeps' are heard on boot if Ctrl-U is pressed, or devmode/recmode is entered. I also tested via an explicit call to VbExBeep in the kernel boot path. Note that a couple of Rush CLs for depthcharge are needed for audio, too. BUG=chrome-os-partner:32582 BRANCH=none TEST=as above. Built and booted Rush/Norrin64. Change-Id: I43c65a4d11c5ab7b16289e19f3b42cfc0300ea7c Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 4a682fb2403f7c6d53e74bfa945481242577f6c3 Original-Change-Id: Ia37f077569afd806ce6574c4c58813fd7aca1644 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233671 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9579 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13rush: Add gpio config for PWR button and LID open switchJimmy Zhang
Due to CL https://chromium-review.googlesource.com/231250, depthcharge now detects gpio state based on gpio configurations done by coreboot instead of redoing configuration at depthcharge. However, PWR button and LID open pins have not been configured in coreboot. So, add the missing code here. Otherwise, TOT coreboot/depthcharge rush build can not load in kernel. BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush and test with pwr button press and lid switch Change-Id: I7acc5e021fa769f68d4cbfd7202df325d4ea73c2 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: a25dff24a2dcd33fcd15eb766432414af215c3ab Original-Change-Id: I6c322cd987967920f236aae653294db079678408 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233322 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9575 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13nyan/rush/veyron: Align ChromeOS GPIOs to new modelJulius Werner
This CL makes slight changes to the ChromeOS-specific GPIO definitions of Tegra and Rockchip boards to prepare them for new features in depthcharge. It adds descriptions for the EC in RW and reset GPIOs, changes the value Tegra writes into the (previously unused) 'port' field to describe the complete GPIO information, and removes code to sample some GPIOs that don't need to be sampled at coreboot time (to help depthcharge detect errors and avoid using a stale value for something that should always represent the current state). BRANCH=None BUG=None TEST=None (tested together with depthcharge patches) Change-Id: I3774979dbe7cacce4932c85810596d80e5664028 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: df295d0432fbf623597cf36ebb170bd4f63ee08d Original-Change-Id: I36bb16c8d931f862bf12a5b862b10cf18d738ddd Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231222 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9570 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13urara: add support for DMA coherent memory areaIonela Voinescu
The information about the DMA memory area is further passed through the coreboot table to the payload. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA; DMA memory area was used to test the functionality of the DWC2 USB controller driver; behavior was as expected. BRANCH=none Change-Id: I658e32352bd5fab493ffe15ad9340e19d02fd133 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 0debc105b072a37e2a8ae4098a9634d841191d0a Original-Change-Id: Icf69835dc6a385a59d30092be4ac69bc80245336 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/235910 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9593 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10Add google/veyron_mighty boardKatie Roberts-Hoffman
Essentially a copy of veyron_jerry for now. BUG=chrome-os-partner:33269 TEST=build Change-Id: Ie2d115d57fe4b6359fa6bb16a2e85e88ec99e991 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9ec25b9cf2985786e55f0b85c3849ccbd42bddd4 Original-Change-Id: Icc45c8f8bf9f6916ba7187dde277d15cc60df8a2 Original-Signed-off-by: Katie Roberts-Hoffman <katierh@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/230961 Original-Commit-Id: 407b8b74a068220d8051dd0d85d9c4ec3ea14d51 Original-Change-Id: I546dbc41ccd191159e96b851424fcb37902a57ec Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231691 Reviewed-on: http://review.coreboot.org/9554 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10rockchip: support displayhuang lin
Implement VOP and eDP drivers, vop and edp clock configuration, framebuffer allocation and display configuration logic. The eDP driver reads panel EDID to determine panel dimensions and the pixel clock used by the VOP. The pixel clock is generating using the NPLL. BUG=chrome-os-partner:31897 TEST=Booted Veyron Pinky and display normal BRANCH=None Change-Id: I01b5c347a3433a108806aec61aa3a875cab8c129 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e4f863b0b57f2f5293ea8015db86cf7f8acc5853 Original-Change-Id: I61214f55e96bc1dcda9b0f700e5db11e49e5e533 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/219050 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9553 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10veyron*: select VIRTUAL_DEV_SWITCHDavid Hendricks
Like most newer Chromebooks, Pinky and Jerry do not have physical dev switches. BUG=chrome-os-partner:33395 BRANCH=none TEST=built and booted on Pinky, crossystem prints a valid value for devsw_cur instead of an error. Change-Id: If97ffa6f99eb31c05915f3ee82aaf6bd252d29e4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: db302d7286d3e7df9442928dac1d611a2c103163 Original-Change-Id: I186518a59699d293c7938221b3ae45b27361c255 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229680 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9552 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10veyron: Adapt to new board revisionsJulius Werner
This patch adds support for Pinky rev3 (board ID 2) and Jerry rev2: the power button GPIO changed polarity to low, the 5V_DRV pin for USB power was moved to the AP again (welcome back!), and the EMMC_RST_L is now finally on a port with the right IO voltage so we don't need any weird pull-up tricks anymore. Since there are very few Jerry rev1s around, we'll just move it over to the new code directly without introducing board ID differences (also, because I have no idea how they stuffed it this time... is this one actually called rev2?). BRANCH=None BUG=None TEST=Still boots on my Pinky rev2, though that doesn't say much. Change-Id: Id11044cedcaac5a4ae07e696893823925107a6db Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 55344a9518ff04edcef01bcd40817e9e4b613717 Original-Change-Id: Iddee360fbda357ecde4ae5fbb5c3a01fe0c22474 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229010 Original-Reviewed-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9551 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10veyron_jerry: Port CPU overshoot preventionJulius Werner
This patch ports commit 567f616f (rk3288: slowly raise to max cpu voltage to prevent overshoot) to Veyron_Jerry. It also fixes include ordering and some comment grammar in the affected code. BRANCH=None BUG=chrome-os-partner:32716 TEST=None Change-Id: I4ac14a38e4b3acc4926d4f51f409ff12d9c841cf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 679014bc843788e8d4d5f5c7470ae76f8be5e942 Original-Change-Id: I9c0aba40ddd8a0852391df184034baa740d063df Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/228938 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9550 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10veyron*: sdram_get_ram_code() -> ram_code()David Hendricks
This enables RAM_CODE_SUPPORT for veyron* platforms and uses the generic gpio_get_binaries() function to read RAM_ID GPIOs. BUG=chrome-os-partner:31728 BRANCH=none TEST=built and booted on pinky Change-Id: I7a03e42a270bec7036004375d36734bfdfe6e528 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a325b204ff88131dfb0bdd3dfedb3c007cd98010 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Ibc4c61687f1c59311cbf6b48371f9a9125dbe115 Original-Reviewed-on: https://chromium-review.googlesource.com/227249 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9549 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10veyron*: use gpio_base2_value() in board_id()David Hendricks
This makes board_id() use the generic gpio_base2_value() function to obtain the value of the board ID straps. BUG=none BRANCH=none TEST=tested on pinky Change-Id: I15c1310889b989c34638fd342011aef5fe7bcec1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fcbb8a6998a66531326afe16b232395d49fee64d Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I5847bf1c5b26bcaf7d36103f31bb255b31ff8185 Original-Reviewed-on: https://chromium-review.googlesource.com/228370 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9548 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10veyron: Change VCC10_LCD_PWREN_H to allowed maximum of 2.5VJulius Werner
LDO7 (VCC10_LCD_PWREN_H) is essentially just a glorified GPIO that turns the real VCC10 regulator on or off. We tried setting it to 3.3V since it matches the VCC33_SYS voltage on the input of that regulator. However, we didn't notice that the LDO only supports going up to 2.5V. This patch changes the voltage to the allowed maximum, which should still work fine as an enable line (and is the same value used by the kernel). This removes an assertion error in the ramstage. Also change the PMIC driver to assert maximum VSEL values based on the LDO, because the lower-voltage ones support one more setting. (LDO3 is actually listed to only go up to 0b1111 in the manual, and has a weird jump from 0b1101 -> 2.2V (skipping over 0b1110) to 0b1111 -> 2.5V. I don't know if that's a documentation error or what they were smoking when they designed that, but we don't need to care for now.) BRANCH=None BUG=None TEST=Booted on Pinky, no more ASSERTION FAILED. Change-Id: I38bf99e38822fd0883fd4d0bd9a1b01143545a95 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 70f3149efbc3aa9a03ab3fd5be99d17d9c5e1c87 Original-Change-Id: I68a3bb882cf25d98aca8922ede2a17e1ef6524de Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/228292 Original-Commit-Queue: Lin Huang <hl@rock-chips.com> Original-Tested-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-by: Jerry Parson <jwp@chromium.org> Reviewed-on: http://review.coreboot.org/9547 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10veyron_jerry: Remove board ID based assumptionsJulius Werner
The veyron_jerry board code was just copied over from veyron_pinky 1-to-1. The Jerry board IDs start at 1, but there has never been a Jerry rev0 so we can remove the code for board ID 0 from it. BRANCH=none BUG=None TEST=Booted Jerry image on a Pinky rev2, worked fine. Change-Id: I0f2ffdc577934c1695e8d2dcf71512696ac1d5a5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: aa36da69ac584b845e15282dae100eec27fc7f12 Original-Change-Id: I45a18b288c8d8b1399ceedf582addcce1c7e857d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/228254 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9546 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10veyron: Change eMMC enable pin to be pulled (not driven) highDoug Anderson
The eMMC enable pin is in a 3.3V IO domain. Unfortunately the eMMC expects this pin to be 1.8V. The way we were driving this pin would cause the eMMC to pull power through this pin and that was causing current leaks. In future revisions of hardware we should move this pin somewhere more legit. However, in the current hardware we can get things working pretty well by using a pullup to "drive" this pin. This will work in conjunction with the external 100K pullup to give a somewhat reasonable voltage. The eMMC will also not be able to pull much current through this pin, so it can't leak too badly. BRANCH=none BUG=chrome-os-partner:33319 TEST=Boot a kernel that doesn't touch the mux/pulls and see no leak: dut-control --port=${SERVO} vcc_flash_ma -t 5 Change-Id: Ibc25cd090d826c8215be24a0b5c11d97b5281700 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 26e7a9d7e067ed4dd859387ee63bf654ab9dc529 Original-Change-Id: Iadfc1477cd478773cc9d159e3fbc22b66b8f0f78 Original-Signed-off-by: Doug Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/226039 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9545 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10Add google/veyron_jerry boardKatie Roberts-Hoffman
This is essentially a copy of veyron_pinky for now. BUG=chrome-os-partner:33269 TEST=build and boot Change-Id: I151c82f54ece4620953d0db5aedf027a3293926f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 267611f2354be4384de3f05d2459a4e421ee6b4f Original-Change-Id: I0d473361e0850ee3b11da5a809f8396826ccdad6 Original-Signed-off-by: Katie Roberts-Hoffman <katierh@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/225301 Reviewed-on: http://review.coreboot.org/9544 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10storm: copy WiFi calibration data in the CBMEMVadim Bendebury
Invoke the function which copies WiFi calibration data in a CBMEM table. BRANCH=storm BUG=chrome-os-partner:32611 TEST=verified that the WIFI entry is added to CBMEM when the calibration data is present in the VPD. Change-Id: Icab0a2343e88e1d44575eeb608fdf6588aff255b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 68b96f158633cb3a1f157b5a19da39fa7e78f975 Original-Change-Id: I5fa77da98e37b88da01fb7884e713535fc178006 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/225272 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9543 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10tegra132: Make non-vboot2 memlayout more usefulFurquan Shaikh
Update non-vboot2 memlayout: 1) Add timestamp region 2) Increase ramstage size 3) Change name from memlayout_vboot.ld to memlayout.ld so that any non-vboot upstream board can also use this layout. BUG=None BRANCH=None TEST=Compiles and boots to kernel prompt on ryu with vboot selected instead of vboot2. Change-Id: Idced98f9df7cdbab5f62cd1e382c6046ade1d867 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 20fffa282b20fb32ce2ff687f4479be630f90fcf Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Change-Id: I91accd54efc53ab563a2063b9c6e9390f5dd527f Original-Reviewed-on: https://chromium-review.googlesource.com/231547 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9536 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10google/rush_ryu: Add speaker amp config for AD4567 on P0/P1Tom Warren
A couple of regs need to be poked to allow audio output from this part on Ryu P0/P1. It will be replaced by two non-configurable amps on P3. BUG=none BRANCH=none TEST=Build/flashed on Ryu P1, dumped AD4567 (I2C6 dev 0x34) regs and confirmed settings. Change-Id: Ie602b056fb1488546ab233f8f81cfacb96624ebb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 75dabe378b561e939381e2ef5113a2b28bfcedf8 Original-Change-Id: I8999843646927dbd07a179ede973ba5f1eb97167 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/231384 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9532 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10google/rush_ryu: Remove long delay when turning on AVDD_DSI_CSIJimmy Zhang
Based on TPS65913, the max LDO turn on time is 500us. Since it is requested the default delay of 500us when calling function pmic_write_reg(), it is safe to remove this 100ms delay. BRANCH=none BUG=chrome-os-partner:31936 TEST=build and test on ryu Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Change-Id: I2cfda38728db223c26f9122b70d37e828921459a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 271b7e95f66f4b8611a0d408e59f428c315074f3 Original-Change-Id: I53aecc273484edfa502231b44f6bcd7f5d8f9331 Original-Reviewed-on: https://chromium-review.googlesource.com/231170 Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com> Reviewed-on: http://review.coreboot.org/9529 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10google/rush_ryu: audio: Setup clocks for AHUB, I2S1, codec, etc.Tom Warren
The Ryu RT5677 audio codec uses EXTPERIPH1 clock (12MHz) for MCLK1, I2S1 for input. AHUB needs all of its child peripherals taken out of reset and enabled, too. This just sets up the audio clocks. More work still to be done in the codec driver, and some kind of stub needs to be created/hacked to set up the AD4567 speaker amp regs for mono output on P1. BUG=chrome-os-partner:32582 BRANCH=none TEST=Dumped clock regs and saw correct values Change-Id: Ifb6551f1e09b38f440f3bb7c759b5e6c0b9e4e44 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 48f989a0291044f5fb4340cc89546325d819d82f Original-Change-Id: I6c9e760ac39def92a6054d673f781facdbfd70a2 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/229993 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9523 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10google/rush_ryu: devicetree: Add framebuffer resolution settingsJimmy Zhang
When displaying a 800x600 bitmap on 2560x1800 panel, the image is shown very small. So, set the fb to 1280x800 (based on tegra dsi driver default mode setting), a 800x600 image can be shown relatively proportional to panel size. BRANCH=none BUG=chrome-os-partner:31936 TEST=build and test on ryu Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Change-Id: I1e360aeaec97b9df5d86e46951ab1326610260d2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 67c2a381322721a24b1b7f9ac366073b7e3c490c Original-Change-Id: I62cbe9de1d1002293df20f8b1d752905c6ef33aa Original-Reviewed-on: https://chromium-review.googlesource.com/229912 Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9521 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10tegra132: Pass panel spec to lib_sysinfoJimmy Zhang
panel spec such as resoultion, bits per pixel are needed to pass to depthcharge/payload for displaying bitmap onto panel. Enable display code only if mainboard selects MAINBOARD_DO_NATIVE_VGA_INIT. Otherwise build breaks for boards that do not support display init yet. BRANCH=none BUG=chrome-os-partner:31936 TEST=Compiles for both rush and ryu. Display comes up for ryu in both normal and dev mode. Change-Id: I81b4d289699e7b0c2758ea1a009cbabaf8a2ce28 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b9b42486f203d332f6068ccd6f4a1a982d327a6b Original-Change-Id: I5c8fde17d57e953582a1c1dc814be4c08e349847 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Commit-Id: ce2883b21d3fbfd54eac3a355fb34ec70e9f31ad Original-Change-Id: Ib4a3c32f1ebf5c6ed71c96a24893dcdee7488b16 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/9519 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10google/rush_ryu: devicetree: Add dsi panel mode settingsJimmy Zhang
BRANCH=none BUG=chrome-os-partner:31936 TEST=build and test on ryu Change-Id: I2bd1b2c2b1bfe75702a12129ca57b3afa6542575 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6aac5ecb014ab213f465b9aa78f587994c6b3624 Original-Change-Id: I64f2df49a258b4dd024305a9757704a823265e99 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/229911 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9516 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10google/rush_ryu: dsi: Enable panel related vdd and clocksJimmy Zhang
BRANCH=none BUG=chrome-os-partner:31936 TEST=build and test on ryu Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Change-Id: Ia10bf7ae3bde389e883970f9a6ee931c32b8172b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f26902364b6a453adb850abfb0c4ce9686e99b5d Original-Change-Id: I68b92608098959cca14324bfc7e1e58389205989 Original-Reviewed-on: https://chromium-review.googlesource.com/226905 Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9514 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10google/rush_ryu: Disable EC SW sync for proto boards before proto3Furquan Shaikh
BUG=chrome-os-partner:33583 BRANCH=None TEST=No EC SW sync messages seen in depthcharge boot flow. Change-Id: I62b7061a833ba607457a580fb2b217b9c2df0e74 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 552b1d19bacd6692ffb6257fc81220ba0ed89344 Original-Change-Id: I5c1df5a23977f461011a2937adda5770b4742378 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/229081 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9513 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10urara: support building with CHROMEOS enabledVadim Bendebury
Chrome OS support needs to be enabled on urara. This patch adds a placeholder file to keep Chrome OS support code. BRANCH=none BUG=chrome-os-partner:31438 TEST=none Change-Id: I0731469934f04bd68914f09db5d64758c5d01545 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 169c62c9443c3b9fcab23b312b5cb18ba79437f4 Original-Change-Id: I8ec328d4f965ff80d17847f2f8ce62b402c42a46 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/226179 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9466 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-10samus: Log EC panics to eventlogShawn Nematbakhsh
Log the new EC panic host event. BUG=chrome-os-partner:36985 TEST=Manual on Samus. Trigger EC panic, verify that "Panic Reset in previous boot" is seen in /var/log/eventlog. BRANCH=Samus Change-Id: If59c522bd06f308a7ee6c5ff69ea427fcea361c9 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: dae4eb50b3607c5141a77fce6709107283f5dc36 Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I89b358a81a962fd463101d84b6bcf3b0a12830c7 Original-Reviewed-on: https://chromium-review.googlesource.com/252391 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-by: Alec Berg <alecaberg@chromium.org> Reviewed-on: http://review.coreboot.org/9508 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 07:32:13 +0000