| Age | Commit message (Collapse) | Author |
|---|
|
When across warm reset, if VDD_3V3_SD_CARD gets power-cycled but VDDIO_SDMMC3
does not, we will get ~1.5V leakage on VDD. To fix that, we reset VDDIO_SDMMC3
to 0 along with VDD_3V3_SD_CARD in Coreboot. Payloads must turn on VDDIO_SDMMC3
explicitly before accessing SD card.
Note the warnings of "VDD_SDMMC must set early" in comment seems only happens on
U-Boot and can be removed.
BUG=chrome-os-partner:27053
BRNACH=nyan
TEST=Ctrl-U to boot from SD card, login and type "reboot", then Ctrl-U to boot
again. Without this patch, system will fail in loading kernel.
Original-Change-Id: I7f85995317d18587d514ea3afcff3bfea0a33e93
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196961
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Andrew Bresticker <abrestic@chromium.org>
(cherry picked from commit 2cfdb78d9dc229a3c06f19bbe137d59d923908a4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie7d814e0424478c35a56fbc959437ee6a555684a
Reviewed-on: http://review.coreboot.org/7866
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When warm booting, SD card reader on Tegra 124 needs to be reset by setting
power GPIO to zero. Since we don't really access SD card in Coreboot, set it to
zero and let payloads enable power when they need to access SD cards.
CQ-DEPEND=CL:196783
BRANCH=nyan
BUG=chrome-os-partner:27053
TEST=emerge-nyan coreboot depthcharge chromeos-bootimage
# With related changes in depthcharge, boots SD card successfully.
Original-Change-Id: I2d368eb9480c978e9e343648b58a729028c94622
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196774
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Andrew Bresticker <abrestic@chromium.org>
(cherry picked from commit 62bb7d04dff1a87474a8557f144b24e6b7d006ae)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3429535d0d032f9db89d8e70a525a6281102537a
Reviewed-on: http://review.coreboot.org/7865
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some panels (including those on Big DVT) cannot work fine without link training
before sending the video signals, especially multi-lane Full HD panels. We need
to use the fast link training functions from kernel to support them.
BRANCH=Nyan
BUG=chrome-os-partner:28128, chrome-os-partner:28129
TEST=tested on nyan, nyan_big dvt.
Vince verified on Full HD panels.
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Change-Id: Ifde8daf0ebdc6fb407610d3563f3311b2a72dbc4
Original-Reviewed-on: https://chromium-review.googlesource.com/196162
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 992132ff3431fc7abba10cc8e910e36d4f3a3f7a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5ed091ae7a872fd674ab21f9f80267052fcd24b1
Reviewed-on: http://review.coreboot.org/7864
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In the normal mode case these settings aren't overwritten by
the VBIOS because the VBIOS does not run. Therefore, the settings
need to align with what the VBIOS programs so that there is a
consistent panel power sequencing.
BUG=chrome-os-partner:28267
BRANCH=baytrail
TEST=Built and booted. Noted settings set by firmware for both dev
and normal mode match.
Original-Change-Id: Iccf65e2a6bce6859fd7cb0f466d4b44d654523ce
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196822
Original-Reviewed-by: Marc Jones <marc.jones@se-eng.com>
(cherry picked from commit 12999018f2b08df0c3b9cdac1f16e9c4517ea803)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Idf1a701ffcb1c990cec2ca1ccca24cc0d26fabbf
Reviewed-on: http://review.coreboot.org/7846
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The call was after the call to vboot_verify_firmware and so would only be
called when falling back to RO, aka recovery mode. This change moves it to
before vboot_verify_firmware so we'll always have the cbmem console.
BUG=None
TEST=Built and booted on nyan and verified that the cbmem console was the same
as the serial output. Built for big and blaze.
BRANCH=nyan
Original-Change-Id: I02d01110659689b08d32777dae384ac3e01b3b9f
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/196158
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d3e4a778e4a0f5ade7d633d8ce7e72ef06c44086)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id14a19a78bcb21cb0c4030c2e41195e491f690d5
Reviewed-on: http://review.coreboot.org/7777
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Panel datasheet defines some delay between PWM signal out and
backlight enable. This change fixes the current sequence
and makes the delays adjustable by dt setting.
BRANCH=none
BUG=chrome-os-partner:28008
TEST=Verified on Big DVT and Nyan/Norrin panels.
Panel works fine with dev mode, and the measurement
of power on sequence meets panel requirements.
Original-Change-Id: If6015bbb6015a3b203d425f5e90f676ad786b5e8
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/196183
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 2bbcaa7281222ffc0b4026e8b1eb4c210a8e308a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id6424f66eb8dc6adeb70eaa33df742f4e57983c3
Reviewed-on: http://review.coreboot.org/7776
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Enable pinmux clamp function to avoid pinmux conflict.
For pins which are configured to tristate enabled, the inputs to the
controller will be clamped to zero. This can be used to avoid pinmux
conflicts since the tristate bit is set to 1 in the power-on-reset
pinmux setting.
With pinmux clamp enabled, we need to configure all the input pins
to tristate disabled.
BUG=chrome-os-partner:27091
BRANCH=None
TEST=built and booted successfully, display worked fine.
Original-Change-Id: Id79a717f2025c812908c7152d439351208aee8d2
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194060
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c95d6fe79810612cfad721667657cdcb87068d23)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1b23df8b90f83ea2b2c08c4364d90fe71533a5a0
Reviewed-on: http://review.coreboot.org/7775
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This enables event logging support for Nyan platforms.
Right now this doesn't do a whole lot. We can add events in
later CLs.
BUG=none
BRANCH=none
TEST=built and booted for Nyan Rev. 1, eventlog gets initialized
if necessary and can be printed by "mosys eventlog list"
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id77a78f55c8bff9ef0ffc7109c8b03c270e8b6b1
Original-Reviewed-on: https://chromium-review.googlesource.com/191200
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 1bb1a00863a63e53379b02f2b466d4d8ae3cef50)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3a5d896d97dfc66ec37114bd3bac3f34e1c22bf7
Reviewed-on: http://review.coreboot.org/7774
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
hynix-2GB-204MHz/hynix-4GB-204MHz are not workable with Samsung RAMCODE.
To replace them by samsung-2GB-204/samsung-4GB-204 for bring up purpose.
BRANCH=none
BUG=chrome-os-partner:27682
TEST=emerge-nyan_blaze coreboot builds OK; flash to blaze board and
boot to kernel successfully with all the RAMCODE
Original-Change-Id: I7c2a96e84e6988dd739a9621ff93edc01703306a
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/195396
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Katie Roberts-Hoffman <katierh@chromium.org>
(cherry picked from commit dc028c408be58f036fe125abc2e49e2c0cde0aa8)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieeb0250e42fb48c6089bc8dc95550c9b1694d7f8
Reviewed-on: http://review.coreboot.org/7772
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The new API is in use in depthcharge and is based around the "i2c_transfer"
function instead of i2c_read and i2c_write. The new function takes an array of
i2c_seg structures which represent each portion of the transfer after a start
bit and before the stop bit. If there's more than one segment, they're
seperated by repeated starts.
Some wrapper functions have also been added which make certain common
operations easy. These include reading or writing a byte from a register or
reading or writing a blob of raw data. The i2c device drivers generally use
these wrappers but can call the i2c_transfer function directly if the need
something different.
The tegra i2c driver was very similar to the one in depthcharge and was simple
to convert. The Exynos 5250 and 5420 drivers were ported from depthcharge and
replace the ones in coreboot. The Exynos 5420 driver was ported from the high
speed portion of the one in coreboot and was straightforward to port back. The
low speed portion and the Exynos 5250 drivers had been transplanted from U-Boot
and were replaced with the depthcharge implementation.
BUG=None
TEST=Built and booted on nyan with and without EFS. Built and booted on, pit
and daisy.
BRANCH=None
Original-Change-Id: I1e98c3fa2560be25444ab3d0394bb214b9d56e93
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193561
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 00c423fb2c06c69d580ee3ec0a3892ebf164a5fe)
This cherry-pick required additional changes to the following:
src/cpu/allwinner/a10/twi.c
src/drivers/xpowers/axp209/axp209.c
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I691959c66308eeeec219b1bec463b8b365a246d7
Reviewed-on: http://review.coreboot.org/7751
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
PLLD, the clock for display, was previously hard-coded to 306MHz. To support
more different panels, we should calcualte PLLD by panel pixel clock
configuration.
Note existing pixel clock configurations for nyan* boards won't work (they used
to rely on hard-coded approximated values) so the device trees are also
modified.
BRANCH=none
BUG=chrome-os-partner:25933
TEST=emerge-nyan_big coreboot chromeos-bootimage
See panel correctly initialized and got DEV screen.
Original-Change-Id: I8d592f0cc044e7c4e4803c45955642e791210ad3
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/193565
(cherry picked from commit 4f9b793633ebb2d104b0544e3b72fa0d105951c4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib2cabbad60af010e872505e888eab485ba8c2916
Reviewed-on: http://review.coreboot.org/7762
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
GPIO_PU4/PH1 and _PU5/PH2 were set to use the same PWM1/2 SFIO.
Even though no problems were caused by this, correct it here
so we get a conflict-free pinmux map.
BUG=chrome-os-partner:27091
BRANCH=none
TEST=Built and booted on Nyan, ran TegraShell "pinmux check"
and saw no conflicts.
Original-Change-Id: Ib16341aa0c92b9a078d7f3254d4151e9592f40b0
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194582
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit e06a5a62d381f803dd6574787795a51ce1f1fe74)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I055359dc80c0c878ba5f5faac17884a5506a826c
Reviewed-on: http://review.coreboot.org/7759
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
href_to_sync and vref_to_sync are chip specific settings. Currently
they are set to 1/2 of hfront_porch and vfront_porch respectively.
However, to support EDID (CL192730), per David Ung, the safe
values for both are 1 (the same settings as in kernel).
BUG=none
BRANCH=none
TEST=built and booted on nyan.
Original-Change-Id: Ifb8898e720a160ba044e2b526de2a4d17bc63672
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193504
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit a7128a533ba6083ddfeeca3ba0828962cc2c8ab6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6954a5b49c798ebdffb20e3ebc9099cd17591b79
Reviewed-on: http://review.coreboot.org/7758
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change takes about 8K of space away from the cbfs cache and repurposes
it for the cbmem console buffer. This is a little more than twice the space
we currently need for the bootblock and ROM stage to give us some room to grow
and for extra debug output if needed.
BUG=None
TEST=Built and booted on nyan. Checked the cbmem output.
BRANCH=None
Original-Change-Id: I6543bf5efddcf2377528a273f846b8090cd8be55
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193169
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 32e9ea6f9ecaa9b5441c91acab96514222f3af2c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia9e5cc7a4b561bd89137cdc8b594584b272d9fab
Reviewed-on: http://review.coreboot.org/7757
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Set the appropriate config options and make the appropriate calls
to perform vboot verification. The flashmap offset as well as the TPM
information needs to be properly set. Lastly, call into
vboot_verify_firmware() to perform the vboot verification when it is
enabled.
BUG=chrome-os-partner:27094
BRANCH=None
TEST=Built vboot verification on nyan.
Original-Change-Id: I6113badd6143008ceb2b80f0ec0832e1addd03d7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/190928
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 8c6c48c7823738bf9b029a467b077d2ee20d04e5)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2a442b1b0fff55e737df2e96740c05c1726502d5
Reviewed-on: http://review.coreboot.org/7743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
RAM module for RAMCODE 0010 (K4B4G1646Q) does not work with
hynix-2GB-204MHz configuration. We need to replace it by
hynix-2GB-792MHz. Also updated hynix-2GB-792MHz configuration
from Nyan board folder. This commit is only for bring up stage.
Once finish dram stress test, will update it again.
BRANCH=none
BUG=chrome-os-partner:27682
TEST=emerge-nyan_blaze coreboot builds OK; flash to blaze board and
boot to kernel successfully
Original-Change-Id: Idfc503c944ac6120c92a4cf329f3fbe63b2c2a1c
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193737
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 91f21aa0cf9251b825e42d946d8cd41849c57447)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6293fa638c5b2577e502ba34a3cc6e6d5b7f2fdb
Reviewed-on: http://review.coreboot.org/7742
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are some unexpected symbol at the end of each line in the
generated .inc file when the config file is in DOS format (CR+LF).
Modify cfg2inc to support DOS format cfg file by removing carriage return symbols from the end of each line.
BUG=chrome-os-partner:27614
TEST=sudo cfg2inc.sh XXX.cfg # make a expected inc file
BRANCH=nyan
Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Change-Id: I68b0f4b3805fcb5a6b633653c95afbafcb880a93
Original-Reviewed-on: https://chromium-review.googlesource.com/192697
Original-Tested-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Neil Chen <neilc@nvidia.com>
(cherry picked from commit 38e90ab0d9110d3ede39c70e27961b833813a7d4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I30737600fa8ac12a45ad0fbc6086a624993794e7
Reviewed-on: http://review.coreboot.org/7741
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
To set the 8 different BCT as hynix-2GB-204 first. Once the
corresponding BCT release from AE, change it.
BRANCH=none
BUG=None
TEST=emerge-nyan_blaze coreboot builds OK
Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Change-Id: Ia42a4a5b85c561421ab8ae9aaf21c46a3c0a3513
Original-Reviewed-on: https://chromium-review.googlesource.com/191682
Original-Tested-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-by: Artiste Hsu <chhsu@nvidia.com>
Original-Reviewed-by: Katie Roberts-Hoffman <katierh@chromium.org>
Original-Commit-Queue: Neil Chen <neilc@nvidia.com>
(cherry picked from commit 27792db4a90ae00e066bb0b88968cf5f187edb1d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia648c8bdbbbc82bbc8508bead6ab24d8d0aa3fb2
Reviewed-on: http://review.coreboot.org/7740
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The EC doesn't seem to be able to handle its bus running at 4 MHz or higher.
To avoid it not being able to keep up, we reduce the frequency of that bus on
all nyan derivatives to 3 MHz. Because PLLP can't be divided that low, we
switch the clock source to CLKM.
BUG=chrome-os-partner:22849
TEST=Built and booted on nyan.
BRANCH=None
Original-Change-Id: I8f31b41098d64634427b4686f5333012f643fada
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193349
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c215c50a5bb982b0e671c951e2fe8df06db85db2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia60513d118aed8881927e9d52f170e27655ea8e7
Reviewed-on: http://review.coreboot.org/7739
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The SPI drivers for tegra and exynos5420 have code in them which waits for a
frame header and leaves filler data out. The SPI driver shouldn't have support
for frame headers directly. If a device uses them, it should support them
itself. That makes the SPI drivers simpler and easier to write.
When moving the frame handling logic into the EC support code, EC communication
continued to work on tegra but no longer worked on exynos5420. That suggested
the SPI driver on the 5420 wasn't working correctly, so I replaced that with
the implementation in depthcharge. Unfortunately that implementation doesn't
support waiting for a frame header for the EC, so these changes are combined
into one.
BUG=None
TEST=Built and booted on pit. Built and booted on nyan. In both cases,
verified that there were no error messages from the SPI drivers or the EC
code.
BRANCH=None
Original-Change-Id: I62a68820c632f154acece94f54276ddcd1442c09
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191192
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4fcfed280ad70f14a013d5353aa0bee0af540630)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id8824523abc7afcbc214845901628833e135d142
Reviewed-on: http://review.coreboot.org/7706
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Following the reasoning in,
8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: Id3b16872f62660393d938d6f95977a4e3842d0d1
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7690
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This config is used only to generate PIRQ table. If no such table is
supplied there is no need for config.
Change-Id: I537d440f53019a6bf7f190446074e75e7420545a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7566
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
No need to mark Makefiles, C files or devicetrees
executable.
Change-Id: Ide3a0efc5b14f2cbd7e2a65c541b52491575bb78
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7618
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I8486e70615f4c404a342cb86963b5357a934c41d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7606
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Southbridge already selects it, no need to repeat.
Change-Id: I9a5ad553f48e30103371cc2d896168ae4abfb8ef
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7570
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
GPIOs 32 and 64 used the wrong code path.
Change-Id: I1d293cf38844b477cac67bc19ce5e5c92a6e93ca
Found-by: Coverity Scan
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7577
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
On those chipsets the pins are just a legacy concept. Real interrupts are
messages on corresponding busses or some internal logic of chipset.
Hence interrupt routing isn't anymore board-specific (dependent on layout) but
depends only on configuration.
Rather than attempting to sync real config, ACPI and legacy descriptors, just
use the same interrupt routing per chipset covering all possible devices.
The only part which remains board-specific are LPC and PCI interrupts.
Interrupt balancing may suffer from such merge but:
a) Doesn't seem to be the case of this map on current systems
b) Almost all OS use MSI nowadays bypassing this stuff completely
c) If we want a good balancing we need to take into account that e.g.
wlan card may be placed in a different slot and so would require complicated
balancing on runtime. It's difficult to maintain with almost no benefit.
Change-Id: I9f63d1d338c5587ebac7a52093e5b924f6e5ca2d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7130
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This is a companion patch of CL:191692 "Tegra: Fix Beep".
TEST=Booted Big. Verified beeps at dev screen. Measured frequency by smartphone.
Built Blaze.
BUG=chrome-os-partner:26609
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I9ba47d06202e9968a908c4a15cfbeac4bfe2c20c
Original-Reviewed-on: https://chromium-review.googlesource.com/192063
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 87a0f166e493b98d2a4e597f90ede090161fffdb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id3b819745b0753862e8cfa43e7fa1ed4b27eb462
Reviewed-on: http://review.coreboot.org/7462
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The TPM now works correctly with the I2C bus running at 400 KHz. Running it at
that frequency saves some boot time.
CQ-DEPEND=CL:191634
CQ-DEPEND=CL:191793
BUG=chrome-os-partner:27220
TEST=Built and booted on nyan with and without EFS.
BRANCH=None
Original-Change-Id: I157308c2745342dc1ada4499433004c7ce1c6435
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191813
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 39a740d488d8f33ee698805bc2a8438263162cc8)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I02978407e20cc9d526545157a3a3304729a91010
Reviewed-on: http://review.coreboot.org/7461
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This is required to send 1.5Mhz clock to Max98090 and get a right beep sound.
BUG=chrome-os-partner:26609
TEST=Booted Nyan. Verified Max98090 can beep. Measured frequency by smartphone.
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Ie3ff6df6759cb23d78dc05069553ddb4eb8e508a
Original-Reviewed-on: https://chromium-review.googlesource.com/191791
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 2f75a147f26ac334fff174a1f9618a2bbe290fe9)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If8c7871dc8202f98ccf23fb0afad1e7745fbf174
Reviewed-on: http://review.coreboot.org/7457
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
To enable EFS, we need to be able to talk to the TPM and the EC before the RAM
stage starts. That means we need to set up the pins for those busses, clock
those controllers and take them out of reset.
BUG=None
TEST=Built for nyan, nyan_big, and nyan_blaze. Booted on nyan. With other
changes which implement EFS on nyan, saw EC and TPM communication work when in
vboot.
BRANCH=None
Original-Change-Id: Ic65d69fd42beec5f03084c8cb970927c2f69dfb6
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191390
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d9c176536b1e2eba47fdca90dd3346052573223e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id3117bd0c36f8b92d85cc0cefde2bed9d8de90d0
Reviewed-on: http://review.coreboot.org/7456
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The existing display init functions were translated from a script. The new
code will play the same functions but are cleaner and readable and easier to
be ported to new panel.
BUG=none
TEST=build nyan and boot up kernel.
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Change-Id: Ic9983e57684a03e206efe3731968ec62905f4ee8
Original-Reviewed-on: https://chromium-review.googlesource.com/189518
Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 5998f991ea3069d603443b93c2ebdcdcd04af961)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Squashed to pass abuild
nyan: Fix the build for big and blaze.
The display code for the tegra124 was cleaned up recently, but only the nyan
device tree was updated to match the new code, not big's or blaze's. This
change copies nyan's device tree over to those other two boards which will get
them building again. The settings may not be correct, but they'll be no less
correct than they were before. I also updated the copyright date for nyan.
BUG=none
TEST=Built for nyan, nyan_big, nyan_blaze. Booted on nyan_big and verified the
panel wasn't damaged by the new display code or settings.
BRANCH=None
Original-Change-Id: I75055a01f9402b3a9de9a787a9d3e737d25bb515
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191364
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ea235f23df31b4ca8006dcdf3628eed096e062b9)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icdad74bf2d013c3677e1a3373b8f89fad99f616e
Reviewed-on: http://review.coreboot.org/7454
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The nyan_blaze board will have different BCT .inc files, to be
added/updated later. GPIOs and some devicetree stuff may also differ.
BUG=None
TEST=Built nyan, nyan_big and nyan_blaze.
BRANCH=None
Original-Change-Id: I8b16fc71346cf973983aa046096b79cb83ad4bb6
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/190721
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit bea753131e2247a90cc5359fa5f603026d66c7ce)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I435ae78da2f6c4f1a78fea8300b6285e52272535
Reviewed-on: http://review.coreboot.org/7453
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Switching unused pin to GPIO to avoid SPI1 conflicting.
BUG=chrome-os-partner:26701
BRANCH=none
TEST=Built and boot on Nyan
Original-Change-Id: I7de5b8d015f6d02baadd41b1b272dfc49d17c376
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/189970
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit edf12f441adb2395fe2718bed98d79eb3b128f6b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I562b58ba02825b16d374d9f0328f6c75431edc63
Reviewed-on: http://review.coreboot.org/7420
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The PMIC setup code was unconditionally waiting for 10ms after each register
write. It might be possible for there to be an excess of current from lots of
rails switching around at the same time, but we can avoid that with a much
shorter delay in a few strategic places.
This change also moves the write to LDO3 to just under SD1 because LDO3 should
track SD1.
The duration and position for the delays and moving LDO3 were provided by Dan
Coggin at nvidia.
BUG=chrome-os-partner:25467
TEST=Built and booted on nyan rev1. Measured a 230 ms decrease in boot time.
BRANCH=None
Original-Change-Id: I14805bf1b6242bdd0b286f37ae7d635c03909677
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/189016
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Daniel Coggin <dcoggin@nvidia.com>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 06c4d346deeb47809cd88655a9fa6712ceef9491)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3ce0bdeb4ee60499f6c192fe0803a4cab3d7a8af
Reviewed-on: http://review.coreboot.org/7419
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
These had been set to something fairly random which results in a very slow
clock on the bus itself. The new settings take into consideration the speed
the devices on the bus can run at. The TPM can't seem to handle speeds above
40KHz, but some documentation suggests that it should be able to handle up to
at least 100KHz.
BUG=chrome-os-partner:25467
TEST=Built and booted on nyan rev1. Built for big.
BRANCH=None
Original-Change-Id: Iee98957c7e492c7dd08b071aeef3cce75c4a9e56
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/189015
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit afca97a29aeb99d3899b713d0e57a3b3214f0d96)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iab0c50b2119ac322252564354c90b5cb2d255c97
Reviewed-on: http://review.coreboot.org/7418
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
When using LPAE, the address space is split to 2MB blocks. This change makes
the space reserved for DMA consistent with the block size.
TEST=Booted nyan with and without LPAE. Built nyan_big.
BUG=None
BRANCH=None
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I75c77484f6ca9f23b583ef651956d0265a9b4474
Original-Reviewed-on: https://chromium-review.googlesource.com/188571
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 16a40a48c2e3fc131a348d5e7d377d26f4b20aaf)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib79c9491dc504d28f811bbf0d91cffd292f5eb86
Reviewed-on: http://review.coreboot.org/7413
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This indirectly selects an appropriate PLLX frequency so the main CPUs run as
fast as they can but not faster.
BUG=chrome-os-partner:25467
TEST=Booted on nyan rev1.
BRANCH=None
Original-Change-Id: Ibe61f5e35246b272771debf4fdf90c79b21eb5d0
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/188603
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 947ecbce3cb6e4d7ab07d3ffd5b4694ca6270cde)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9163ddea7f246ae7207a8a715ebae2c9627a7e37
Reviewed-on: http://review.coreboot.org/7410
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
BUG=none
BRANCH=nyan
TEST=built and booted coreboot on my Nyan-rev1, browsed, ran Youtube vids,
WebGL experiments, etc. Everything seemed OK.
Original-Change-Id: I877680c9329ed96a0b602f0690acaa12079786d7
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/188550
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit b6ca59e9db26f7422fa43ade889c921257a36851)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If166938f241e2a4a8670bfce2df6591b4b71ff67
Reviewed-on: http://review.coreboot.org/7408
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The SRAM is very likely faster than going all the way out to DRAM for data,
but I don't think it's part of the cores themselves and won't be as fast as
the L1 caches. Enabling caching for this region reduces the time it takes to
get to the payload by about 75% when serial output is disabled and the main
part of display init is commented out.
BUG=chrome-os-partner:25467
TEST=Built and booted on nyan.
BRANCH=None
Original-Change-Id: I7ff26dea9d50e7d9a76e598e5654488481286b35
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/188459
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ac8b9b30490d511ca1b207af6845d50e08ac130f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If79dcd1b116f30b778788ba4fd45d362ff5d8e6e
Reviewed-on: http://review.coreboot.org/7407
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Replace sdram entry 1 with valid configurations since nyan 4GB board uses
RAM_CODE 1.
BUG=none
TEST=Flash and boot new image.bin. Console shows "RAMCODE=1" and
"Total SDRAM (MB): 4096"
BRANCH=none
Original-Change-Id: Ia872bd7849f1b58075e1f97bf300e081293cb0d4
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/187450
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit f19e2ea3dd4d314b7540c7cf9a11d7af289d24d0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4914c3811b13c8cee0577101bc0c8ee32a0a5b81
Reviewed-on: http://review.coreboot.org/7406
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
When setting up caching on nyan and big, we would set the region after DRAM to
the end of the address space as uncachable. DRAM may actually extend beyond
the end of the address space, so that may result in address aliasing or other
problems. This change adds a check to make sure there's actually space there.
BUG=None
TEST=Built for big.
BRANCH=None
Original-Change-Id: Ic0a98550222f9dfc0aeafd67a2dd1c0c8f4ece44
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/186769
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 1866a4d2a001beb97779b611b8b69c63175048f4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If1ca8b5bd4efab8962e03c0d9eaa70c0327ea6b5
Reviewed-on: http://review.coreboot.org/7405
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This patch brings in ipq806x source files from the vendor's u-boot
tree as it was published in the 'cs_banana' release.
The following files are being copied:
arch/arm/cpu/armv7/ipq/clock.c => src/soc/qualcomm/ipq806x/clock.c
arch/arm/cpu/armv7/ipq/gpio.c => src/soc/qualcomm/ipq806x/gpio.c
arch/arm/cpu/armv7/ipq/timer.c => src/soc/qualcomm/ipq806x/timer.c
arch/arm/include/asm/arch-ipq806x/clock.h => src/soc/qualcomm/ipq806x/clock.h
arch/arm/include/asm/arch-ipq806x/gpio.h => src/soc/qualcomm/ipq806x/gpio.h
arch/arm/include/asm/arch-ipq806x/gsbi.h => src/soc/qualcomm/ipq806x/gsbi.h
arch/arm/include/asm/arch-ipq806x/iomap.h => src/soc/qualcomm/ipq806x/iomap.h
arch/arm/include/asm/arch-ipq806x/timer.h src/soc/qualcomm/ipq806x/timer.h
arch/arm/include/asm/arch-ipq806x/uart.h => src/soc/qualcomm/ipq806x/uart.h
board/qcom/ipq806x_cdp/ipq806x_cdp.c => src/mainboard/google/storm/cdp.c
board/qcom/ipq806x_cdp/ipq806x_cdp.h => src/soc/qualcomm/ipq8064/cdp.h
drivers/serial/ipq806x_uart.c => src/console/ipq806x_console.c
Note that local timer.c gets overwritten with the original version. To
prevent a build breakage some shortly to be reverted modifications had
to be made to src/soc/qualcomm/ipq806x/Makefile.inc and
src/soc/qualcomm/ipq806x/cbfs.c.
BRANCH=none
BUG=chrome-os-partner:27784
TEST='emerge-storm coreboot' still succeeds
Original-Change-Id: I3f50bfbec2e18a3b5d2c640cff353a26f88c98c1
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/193722
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 3c9c2ede7e97e330cad2c2f3e557cc9bcdaecdcc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia7bc66cecfc16f1dd4a9f3cb9840cbe91878adf4
Reviewed-on: http://review.coreboot.org/7263
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We want the coreboot build produce an image which can be run on the
target, even if the remaining parts of the bootprom (recovery path,
read-write stages, gbb, etc.) are not available yet.
This is achieved by including the Qualcomm SBLs blob in the bootblock.
CQ-DEPEND=CL:193518
BRANCH=None
BUG=chrome-os-partner:27784
TEST=manual
. run the following commands inside chroot to confirm expected image
layout (no actual code is executed on the target yet):
$ emerge-storm coreboot
$ \od -Ax -t x1 -v /build/storm/firmware/coreboot.rom 2>/dev/null | head -1
000000 d1 dc 4b 84 34 10 d7 73 15 00 00 00 ff ff ff ff
$ \od -Ax -t x1 -v /build/storm/firmware/coreboot.rom | grep 220000
220000 05 00 00 00 03 00 00 00 00 00 00 00 00 00 01 2a
Original-Change-Id: I10e8b81c7bd90e4550a027573ad3a26c38c3808a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/193540
(cherry picked from commit 64e193974ee448f78e0a5775a440094901590afb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Idbdbeb9d229eff94a7a94af5dc4844a295458200
Reviewed-on: http://review.coreboot.org/7262
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Repurpose config->pwm to mean the particular PWM device (we use PWM1 on
nyan), and add code to program the PWM device.
BUG=none
TEST=emerge-nyan chromeos-coreboot-nyan, regenerate bootimage, and boot.
See that the backlight comes up in the bootloader, and brightness can be
adjusted via pwm_bl driver in the kernel.
Original-Change-Id: I2db047e5ef23c0e8fb66dd05ad6339d60918d493
Original-Signed-off-by: Andrew Chew <achew@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185772
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
(cherry picked from commit 0dee98dd0c8510ecd630b5c6cb9ea49724dc8b55)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie53610f3afa30b2d8f484685fb0e8c0b12cd8241
Reviewed-on: http://review.coreboot.org/7402
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The generic tegra124 code will use one of the PWMs to drive the backlight of
the display, but the PWM clock was enabled only for nyan. This change enables
it for big as well.
BUG=none
TEST=Built for Big
BRANCH=None
Original-Change-Id: I5171da7c41f4b4db931563ada3e8e4ebf74ec3d9
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/186767
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 687f3771fb3e6b340a818fa7594b3ac0630fdeaf)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ifd14a22a98e7fe273ec28c460b928b8a83c84b66
Reviewed-on: http://review.coreboot.org/7404
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Configure pin H1 for PWM1, and enable the PWM clock.
BUG=none
TEST=emerge-nyan chromeos-coreboot-nyan
Original-Change-Id: I2f91ebd4666bd227686c08cedf3c1aa7abbe8215
Original-Signed-off-by: Andrew Chew <achew@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185770
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
(cherry picked from commit 069636d9299f64dd64466d45d2297593b37df4f2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic41515842fb883f44f228c77b4cd266e16124d99
Reviewed-on: http://review.coreboot.org/7400
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
We'd been putting some data structures like the framebuffer and the cbmem at
the end of memory, but that may not actually be addressable as identity mapped
memory. This change clamps the addresses those structures are placed at so
they stay below 4GB.
BUG=None
TEST=Booted on nyan. Went into recovery mode and verified that there was a
recovery screen. Forced memory size to be 4GB and verified that the recovery
screen still shows up.
BRANCH=None
Original-Change-Id: I9e6b28212c113107d4f480b3dd846dd2349b3a91
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185571
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 63ea1274a838dc739d302d7551f1db42034c5bd0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I970c1285270cb648bc67fa114d44c0841eab1615
Reviewed-on: http://review.coreboot.org/7397
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
If an asm blob isn't marked as volatile, gcc is free to throw it out if it
doesn't think it produces any values that are actually used. To prevent that
from happening, add volatile to some asm blobs in the nyan romstage code.
BUG=None
TEST=Booted on nyan rev1.
BRANCH=None
Original-Change-Id: I819e068e738e94ea749fcb72bba2eee080e1dfb1
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185610
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 76c09581d6ca4dc6c2f9048f599822939f439d11)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0b32197abf0ddc5f454f9c2415a65d98c60ca48b
Reviewed-on: http://review.coreboot.org/7396
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
This patch changes several cache-related pieces to be cleaner, faster or
more correct. The largest point is removing the old
arm_invalidate_caches() function and surrounding bootblock code to
initialize SCTLR and replace it with an all-assembly function that takes
care of cache and SCTLR initialization to bring the system to a known
state. It runs without stack and before coreboot makes any write
accesses to be as compatible as possible with whatever state the system
was left in by preceeding code. This also finally fixes the dreaded
icache bug that wasted hundreds of milliseconds during boot.
Old-Change-Id: I7bb4995af8184f6383f8e3b1b870b0662bde8bd4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/183890
(cherry picked from commit 07a35925dc957919bf88dfc90515971a36e81b97)
nyan_big: apply cache-related changes from nyan
This applies the same changes from 07a3592 that were applied to nyan.
Old-Change-Id: Idcbe85436d7a2f65fcd751954012eb5f4bec0b6c
Reviewed-on: https://chromium-review.googlesource.com/184551
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4af27f02614da41c611aee2c6d175b1b948428ea)
Squashed the followup patch for nyan_big into the original patch.
Change-Id: Id14aef7846355ea2da496e55da227b635aca409e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
(cherry picked from commit 4cbf25f8eca3a12bbfec5b015953c0fc2b69c877)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/6993
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
