summaryrefslogtreecommitdiff
path: root/src/mainboard/intel
AgeCommit message (Collapse)Author
2020-03-17src/mb/intel/tglrvp: Update camera ACPI configurationDaniel Kang
* Change power sequence to make it closer to ov8856 sensor data sheet version 2 * Handle different PWREN GPIO pins for up3 and up4 * Add link frequencies definitions to sensor side * Clean up format BUG=None BRANCH=None TEST=Build and boot TGLRVP U or Y. Start camera app and able to capture images. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: Ic11a36f1f82fe425c1a5796847ce020007064403 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39529 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-17src/soc/intel/tigerlake: Fix incorrect use of Field objects in ASLRizwan Qureshi
Method RAOW is assuming that the first argument is a Field object and writing to it expecting the register to get updated. However, the callers are passing in the value of the Field object instead. This eventually is resulting the IMGCLK not getting enable/disabled on the platform. Fix this by sending the exact address of the register to be updated. Also MCCT was setting the clock frequency in both case i.e, Clock Enable and Disable. Split the MCCT method in two, MCON and MCOF to fix the sequencing like below MCON: Set frequency Enable clock MCOF: Disable clock Also, make use of MCON and MCOF methods for camera clock control in tglrvp. This is to avoid the buildbot marking the patch unstable. BUG=None BRANCH=None TEST=Build and Boot waddledoo board and verified that IMGCLKOUT for world facing camera is enabled/disabled and able to capture images. Build and Boot Tiger Lake RVP board and verified that IMGCLKOUT for world facing camera is enabled/disabled and able to capture images. Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Change-Id: I8b886255d5f38819502ae1f4af0851b5a0922b22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39498 Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-16mb/intel/tglrvp: Enable ISH driver and register firmware nameli feng
BRANCH=none BUG=b:145946347 TEST=boot to OS with TGL RVP UP3, then copied ISH firmware to host file system /lib/firmware/intel/tglrvp_ish.bin check "dmesg |grep ish", it shows: ish-loader: ISH firmware intel/tglrvp_ish.bin loaded cros_ec_ishtp: Chrome EC device registered Those means shim loader in coreboot has loaded ISH firmware, and firmware is running successfully. Signed-off-by: Hu, Hebo <hebo.hu@intel.com> Signed-off-by: li feng <li1.feng@intel.com> Change-Id: I1ee8050aef6ec0828f16ef2695b5347278caa820 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39481 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/intel/tglrvp: Enable CNVi in devicetree for Tiger Lake UP3Srinidhi N Kaushik
Enable CNVi in devicetree and add gpio pad configs for CNVi BUG=none BRANCH=none TEST=Build and boot tglrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I71146960e0d53dae87946a0365dac6f224a72391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39464 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14mb/intel/tglrvp: Update GPIO settingWonkyu Kim
Update GPIO reset type from PLTRST to DEEP. DEEP setting is more conservative for S3/S4/S5. Detail information is bug. BUG=b:151305120 TEST=Build and boot to OS Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie7d08560ea2ef3623bbd4734b30c80e707869c7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/39476 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/intel/tglrvp: Enable Hybrid storage modeWonkyu Kim
BUG=b:148604250 BRANCH=none TEST=Build and test booting TGLRVP form NVMe and Optane Check PCIe lane configuration Show all the NVMe devices lspci -d ::0108 Show all the NVMe devices and be really verbose lspci -vvvd ::0108 Print PCIe lane capabilities and configurations for all the NVMe devices. lspci -vvvd ::0108 | grep -e x[124] Print all the PCIe information of the device ae:00.0 lspci -vvvs ae: Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I5fc8fa0897ad006de9ebe20115bf3033e1e1b499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-03-11mb/intel/tglrvp: sync up variant folders with latest up3Wonkyu Kim
During intial UP4 patch, below UP3 patches merged which should be applied for UP4. https://review.coreboot.org/c/coreboot/+/39201 https://review.coreboot.org/c/coreboot/+/39229 Merge these patches to UP4 BUG=none BRANCH=none TEST=Build TGL UP4 Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I7b24cb2b0d03309cf67c6c21ddc2031a054f6110 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
2020-03-10mb/intel/{saddlebrook,kunimitsu}: Add macro for SaGv configPraveen Hodagatta Pranesh
Change-Id: Ia31da9997ba46c15cd385bf55e009cf299848b64 Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36423 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10mb/intel/tglrvp: add CNVi ASL entry for dynamic SSDT generationSrinidhi N Kaushik
This change uses drivers/intel/wifi chip for CNVi device and adds dynamic SSDT entires for CNVi also export wake gpio for CNVi BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check for SSDT entries for CNVi Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Icdbffa0c29c9e0849a6a99f8592b6f35c0bb3207 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39315 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-093rdparty/libgfxinit: Update submodule pointerNico Huber
Changes allow to use the integrated panel logic (power sequen- cing and backlight control) for more connectors. The Kconfigs GFX_GMA_PANEL_1_PORT and GFX_GMA_PANEL_2_PORT can now be set to any port, e.g. config GFX_GMA_PANEL_1_PORT default "DP3" Now that the panel logic is not tied to the `Internal` port choice anymore, we can properly split it into `LVDS` and `eDP`. This also adds Comet Lake PCI IDs which should still work the same as Kaby and Coffee Lake. Change-Id: I78b1b458ca00714dcbe7753a7beb4fb05d69986b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38921 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/intel/tglrvp: Add memory config for Tiger Lake UP4Srinidhi N Kaushik
Add LPDDR4 memory configuration for Tiger Lake UP4 platform which includes 1. DQ/DQs Mapping 2. Board id Support 3. SPD indexing BUG=none BRANCH=none TEST= Build TGL UP4 successfully Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ibbd7036919c1a91ef12049d2af657f0a3597b57e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39365 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/intel/tglrvp: Add TGL UP4 RVPWonkyu Kim
Add initial TGL UP4 RVP build enviorment BUG=none BRANCH=none TEST= Build TGL UP4 successfully Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Iab7ada0746394539586e7cc159112dc8208fdd7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39363 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07mb/intel/tglrvp: Add pin mux for CameraWonkyu Kim
Add additional pin mux for I2C3, I2C5 for Camera. These pin muxes were done in FSPs, these pin muxes are for bypassing pin muxes in FSPs. BUG=none BRANCH=none TEST=Build with pin mux bypass FSP and boot tigerlake rvp board and check camera Simple test method to check camera: capture image by below commands from OS console >media-ctl -V "\"Intel IPU6 CSI-2 5\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI-2 5\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"ov8856 18-0010\":0 -> \"Intel IPU6 CSI-2 5\":0[1]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [crop:(0,0)/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"Intel IPU6 CSI-2 5\":1 -> \"Intel IPU6 CSI2 BE\":0[1]" >media-ctl -l "\"Intel IPU6 CSI2 BE\":1 -> \"Intel IPU6 CSI2 BE capture\":0[1]" >yavta -u -c5 -n5 -I -s 3280x2464 --file=/tmp/frame-#.bin -f SGRBG10 $(media-ctl -e "Intel IPU6 CSI2 BE capture") Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9ad0e5ed452d2b2e8c674abe2a647a0a9c59188e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39201 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07mb/intel/tglrvp: Update display ports for RVPWonkyu Kim
Enable DdiPortBHpd and additional pin muxes for DPs. These pin muxes were done in FSPs, these pin muxes are for bypassing pin muxes in FSPs. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check FSP log or DP port pin mux from pinctl driver. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Id44cfba696b1a21296278f4de2ad6de8f6bbd63b Reviewed-on: https://review.coreboot.org/c/coreboot/+/39229 Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07chromeos: stop sharing write protect GPIO with depthchargeJoel Kitching
wpsw_boot is deprecated in favour of wpsw_cur. As such, coreboot no longer needs to share "write protect" GPIO with depthcharge. BUG=b:124141368, chromium:950273 TEST=make clean && make test-abuild BRANCH=none Change-Id: I2fcb7f82aa063fd72928171af5cbef0356ba620c Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:2088434 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39318 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07mb/intel/tglrvp: Add fixed SKUID to SMBIOS tablesWonkyu Kim
Report fixed SKUID (255) to support mosys. BUG=none BRANCH=none TEST=boot tigerlake rvp board and check mosys and SKUID from smbios Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I7a5beed307fd7880a6af127b2dcd06e93e50547d Reviewed-on: https://review.coreboot.org/c/coreboot/+/39269 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/intel/tglrvp: Enable Audio AIC with Max98373 & ALC5682 on TGLSrinidhi N Kaushik
Add support for Max98373 speaker amp & ALC5682 headset codec BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I013dbc6246b07a501f9bff80c2bca3594e6cc146 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-03mb/*/Kconfig: Factor out MAINBOARD_VENDORAngel Pons
Only some mainboard vendors have a prompt for this option. Let's be fair and give this ability to everyone. Change-Id: I03eec7c13d18b42e3c56fb1a43dc665d5dbd1145 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-02mb/**/dsdt.asl: Remove outdated sleepstates.asl commentAngel Pons
Previously, each Intel chipset had its own sleepstates.asl file. However, this is no longer the case, so drop these comments. This follows commit 408d1dac9e23250c0e485bbf934771f769b717c1. Change-Id: I0c0f4ad8bf743010ebdd2d53fcf297aeab64a662 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-02mb/**/dsdt.asl: Remove "Some generic macros" comment, againAngel Pons
It provides no useful information, so it might as well vanish. This follows commit 0142d441c63a9bb1a7955ea0ba764a2ddbc38d48. Change-Id: Iad41d8d39c6712cebfa5245f37bc69061b5ac552 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-02-26mb/intel/tglrvp: add Tiger Lake memory initialization supportSrinidhi N Kaushik
Update memory parameters based on memory type supported by Tiger lake RVP 1. Update dq/dqs mappings 2. Update spd data for Tiger lake LPDDR4 SAMSUNG/MICRON memory 3. Add SPD data bin files for supported memory types 4. Update other FSPM UPDs as part of memory initialization BUG=none BRANCH=none TEST= build tglrvp flash and boot to kernel Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I7248862efd1dcd5a0df0e17d39b44c168caa200e Reviewed-on: https://review.coreboot.org/c/coreboot/+/38998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-02-26treewide: capitalize 'USB'Elyes HAOUAS
Change-Id: I7650786ea50465a4c2d11de948fdb81f4e509772 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39100 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-24mb/intel/jasperlake_rvp: Disable SATA controllerUsha P
This patch disables the SATA config from devicetree for JSL RVP, since we are not planning to use the SATA storage in chrome config. Change-Id: I9cbcbf96e70b79bfb60f228b77a1065c26cd1aa2 Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-02-18mb/intel/glkrvp/chromeos.fmd: Correct indentationAngel Pons
Tested with BUILD_TIMELESS, no changes. Change-Id: Iaf615e95a30e9c02ad49351a3c0db253ad713ad4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-17treewide: capitalize 'BIOS'Elyes HAOUAS
Also replace 'BIOS' by coreboot when the image is 'coreboot.rom'. Change-Id: I8303b7baa9671f19a036a59775026ffd63c85273 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-17soc/intel/tigerlake: Enable Audio on TGLSrinidhi N Kaushik
Configure UPDs to support Audio enablement. Correct the upd name in jslrvp devicetree to avoid compilation issue. BUG=b:147436144 BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Idd3927a33d303ed5a663b5b838f43ed4ebc7a0db Reviewed-on: https://review.coreboot.org/c/coreboot/+/38147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-02-17vboot: push clear recovery mode switch until BS_WRITE_TABLESJoel Kitching
Serves two purposes: (1) On some platforms, FSP initialization may cause a reboot. Push clearing the recovery mode switch until after FSP code runs, so that a manual recovery request (three-finger salute) will function correctly under this condition. (2) The recovery mode switch value is needed at BS_WRITE_TABLES for adding an event to elog. (Previously this was done by stashing the value in CBMEM_ID_EC_HOSTEVENT.) BUG=b:124141368, b:35576380 TEST=make clean && make test-abuild BRANCH=none Change-Id: I30c02787c620b937e5a50a5ed94ac906e3112dad Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-02-15mb/intel/jasperlake_rvp: Enable only required PCIE root portsUsha P
Jasper Lake SOC has 8 PCIe root ports. Cleaning up the root ports as per Jasper Lake. This patch updates the devicetree to enable WLAN and NVME for jasperlake_rvp and removes the other root port configurations which are not required. Change-Id: I6c801d81ccece6b45a7c45212533bb33a6805367 Signed-off-by: Usha P <usha.p@intel.com> Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38679 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-05mb/intel/tglrvp: pin mux for ISHWonkyu Kim
TGL FSP does pin mux for ISH related to pins by UPD(PchIshSpiEnable, PchIshUartEnable, PchIshI2cEnable, PchIshGpEnable) but as default UPD value is disabled, FSP doesn't do pin mux. So pin mux for ISH in gpio.c. Pin mux for ISH for TGLRVP ISHUART0: GPP_D13, GPP_D14 as NF1 ISHI2C0: GPP_B5, GPP_B6 as NF1 ISHGPIO0-7: GPP_D0~D3, GPP_D17~D18, GPP_E15~E16 as NF1 BUG=none BRANCH=none TEST=Build and boot to OS and check pinctl driver to check pin mux. Check ISHUART0, ISHI2C0, ISHGPIO0-7 native function setting. They should be NF1. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I1a9ba3a713527f5ce962659960418cd0f37dd262 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-29mb/intel/kblrvp: Replace whitespaces with tabs in dsdt.aslSubrata Banik
Change-Id: I66e2cfd041f9a93668e41d79c40cec9cb1bd917e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-01-29mb/intel/tglrvp: pin mux for image clocksWonkyu Kim
pin mux for IMGCLKOUT_0 and IMGCLKOUT_1 BUG=none BRANCH=none TEST=Build and boot to OS and check pinctl driver to check pin mux for Image clocks pins(GPP_D4, GPP_H20) Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ifb0c2b17dd481ef6c19bdf9ee84f47ef08d7b9a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-28mb/intel/tglrvp: Enable DP ports for TGLRVPWonkyu Kim
TGLRVP uses DdiPort1Hpd and DdiPort1Ddc. So only enable them. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check FSP log or DP port pin mux from pinctl driver. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ief6376ba59c77340e272923958b6b5f0a1456d9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/38529 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-27mb/intel/tglrvp: Enable MIPI cameraWonkyu Kim
Add MIPI camera ACPI Update GPIO pin mux for camera BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check camera Simple test method to check camera: capture image by below commands from OS console >media-ctl -V "\"Intel IPU6 CSI-2 5\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI-2 5\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"ov8856 18-0010\":0 -> \"Intel IPU6 CSI-2 5\":0[1]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [crop:(0,0)/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"Intel IPU6 CSI-2 5\":1 -> \"Intel IPU6 CSI2 BE\":0[1]" >media-ctl -l "\"Intel IPU6 CSI2 BE\":1 -> \"Intel IPU6 CSI2 BE capture\":0[1]" >yavta -u -c5 -n5 -I -s 3280x2464 --file=/tmp/frame-#.bin -f SGRBG10 $(media-ctl -e "Intel IPU6 CSI2 BE capture") Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I4189e96f68f0e64e0860405e00eeab84564b86be Reviewed-on: https://review.coreboot.org/c/coreboot/+/37863 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-25mb/intel/tglrvp: Enable rp11 for optaneWonkyu Kim
Optane memory module shows up as 2 NVMe devices in x2 config - NVMe storage device and NVMe Optane memory. Storage device uses rp9 and optane memory uses rp11. This patch enables rp11. Please note that these two share clk pins. This is also dependent on pciecontroller3 config to be set as 2x2 instead of 1x4 in fit configuration in IFWI. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board from Optane and check 2 NVMe devices from lspci Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ic81244bebac78102af7ba6308ab64b18c886f839 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-25soc/intel/tigerlake: Fix GPIO communitiesShaunak Saha
GPIOs are divided into different communities. Each community consists of one or more GPIO groups. We need to configure the groups in coreboot so that they are mapped properly. GPIO comuinities in coreboot should match with the kernel gpio communities also. Kernel reads the ASL file from coreboot. This patch adds the proper community mapping in ASL code to match with kernel code. In gpio_soc_defs.c file we are indexing the groups correctly. In gpio.h file we define all the gpio devices as kernel populates sysfs with separate gpio device for each community. This patch is created based on Intel Tiger Lake Processor PCH Datasheet with Document number:575857 and Chapter number:27. BUG=b:144680462 BRANCH=none TEST=Build and boot tigerlake rvp board. In /sys/kernel/debug/pinctrl verify INTC34C5:0<1-3> listing all the pins for each community. e.g., #cat /sys/kernel/debug/pinctrl/INT34C5:00/pins should list all the community 0 pins. Change-Id: I40c386db060d84c1b7fba9c587f960d6a92f84ba Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-01-24mb/intel/tglrvp: Enable SATAWonkyu Kim
Enable both SATA ports for TGLRVP. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board with SATA memory Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9f35682982a6c06522e58b0bbd7162ff02c37f32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38505 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18mb/intel/tglrvp: Update tglrvp_up3 devicetreeRavi Sarawadi
Update Tigerlake RVP UP3 devicetree to reflect devices used by tglrvp_up3. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Idd0d9efe0ab4e050d2160f7662e4dc40a002672f Reviewed-on: https://review.coreboot.org/c/coreboot/+/37929 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/tigerlake: Update chip filesRavi Sarawadi
Update chip files to include : - Update chip.c based on TGL FSP - Update chip.h based on TGL FSP - Update Kconfig : Define CONFIG_MAX_PCIE_CLOCKS for chip.h update - Update pmc_utils.c and JSL devicetree for build failure Reference PCH EDS#576591 vol1 rev1.2 BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Ie1518a7ffa69079fe82232afe229d9e1ffe29067 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37783 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18mb/intel/jasperlake_rvp: Remove sd card detect gpioMaulik V Vaghela
Tigerlake SoC doesn't have GPIO defined for GPP_G. so compilation is failing due to this. We will update correct gpio for sd card detect once we have Jasper Lake soc gpio patch. partner bug for tracking: https://ticket.coreboot.org/issues/251 BUG=None BRANCH=NONE TEST='jslrvp' mainboard builds successfully Change-Id: I097b2f3a4fef1a487495a4aa9d2bcf88aa64f017 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-17mb/tglrvp: update gpio pin mux for NVMeWonkyu Kim
BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board from NVMe Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ib4b85db667c27d266d2ed5a4aa4f4dffa3dd527e Reviewed-on: https://review.coreboot.org/c/coreboot/+/38286 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-14mb/intel/tglrvp: Update KconfigWonkyu Kim
Updating Kconfig to add Chrome OS support with both internal and external EC BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ia63c06e3b4b4effcace7a8458b1066a615de2008 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38148 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-14mb/intel/tglrvp: Add initial mainboard codeRavi Sarawadi
This is a initial mainboard code aimed to serve as base for further mainboard check-ins. This is a copy patch from icelake_rvp as on commit ID: I64db2460115f5fb35ca197b83440f8ee47470761 Below are the changes done over the copy patch: 1. Rename "Icelake" with "Tigerlake". 2. Replace "icelake_rvp" with "tglrvp". 3. Rename "icl" with "tgl". 4. Remove unwanted SPD file, add empty SPD as placeholder. 5. Replace "soc/intel/icelake" with "soc/intel/tigerlake". 6. Empty romstage_fsp_params.c, to fill it later with SOC specific config. 7. Empty GPIO configuration, to be filled as per board. 8. Change copyright year to 2019. 9. Add board support namely BOARD_INTEL_TGLRVP_UP3 10. Replace icl_u and icl_y variant with tglrvp variant. 11. Remove basebord gpio.c and rely on variant override. 12. Remove HDA verb table and config support. Changes to follow on top of this: 1. Add correct memory parameters, add SPDs. 2. Clean up devicetree as per tigerlake SOC. 3. Add GPIO support. 4. Update chromeos.fmd to make 32MB BIOS region. 5. clean up and make empty devicetree setting TEST=Build tigerlake rvp board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I86ada611de1cf28a1b872eea35cf41c0dc1c57f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-01-13mb/intel/*/acpi_tables.c: Remove unneeded includesElyes HAOUAS
Change-Id: I3b110ab749992d1c1793b1d4de43c1d2e8ca15ac Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-11src/mainboard/*.asl: Remove _HID / _ADR objects overlappingJonas Moehle
ACPI spec: "A device object must contain either an _HID object or an _ADR object, but should not contain both." Signed-off-by: Jonas Moehle <ad-min@mailbox.org> Change-Id: I949393558f5af66689c167b2e593a1461f641962 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37935 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-10src: Remove blank acpi_tables source filesKarthikeyan Ramasubramanian
Due to build rules, dummy acpi_tables source files were added in many mainboards. With commit 1e83e5c61a3aa98f58f7d8cbf8d1eb9532896cc3 ("src/arch/x86: Build mainboard acpi_tables source if present"), the build system will build mainboard acpi_tables only if present. Remove the dummy/empty/blank acpi_tables source files. BUG=None TEST=Build test with some google mainboards. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0cef34368e2e5f5e3b946b22658ca10c7caad90a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-01-10mb/**/devicetree.cb: Remove untrue commentsAngel Pons
Even if they were corrected, they just rephrase the code. Change-Id: Iebc4e8c9eb0f44f84acf532ad12a5d064075a102 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-10mb/intel/wtm2/devicetree.cb: Align commentsAngel Pons
Change-Id: I701aea4656e59a369c2e663438a4b2f9644f0ed6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-10mb/intel/emeraldlake2/devicetree.cb: Align contentsAngel Pons
Change-Id: I4ad24a011bd0711dc9a1133dc6188a213cc3926b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-10mb/intel/dg43gt: Make devicetree prettierAngel Pons
Use lowercase for hex constants and align comments and register values. Change-Id: Ib14906113e366a2a6f268fe8b8be32b1794fb344 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38077 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-10mb/intel/dcp847ske: Make devicetree prettierAngel Pons
Align contents and fix some redundant comments. Change-Id: I45fb02ac90fe3d280379b08c9931f1064c71633f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>