summaryrefslogtreecommitdiff
path: root/src/mainboard/lippert
AgeCommit message (Expand)Author
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
2013-02-09romcc: Use default romcc flags for most boardsPatrick Georgi
2012-11-29Drop empty mainboard.cKyösti Mälkki
2012-11-29Drop empty mainboard_opsKyösti Mälkki
2012-11-16Fix PIRQ routing abstractionStefan Reinauer
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
2012-07-26Drop mainboard chip.hStefan Reinauer
2012-07-26amd/lx: Move configuration from source to KconfigPatrick Georgi
2012-02-13AMD Geode cpus: apply un-written naming rulesKyösti Mälkki
2012-01-07Update geode GX2 tree to match LX.Nils Jacobs
2011-04-20run uart_init() from console_init, just like the other console initialization...Stefan Reinauer
2011-04-11Unify use of post_codeAlexandru Gagniuc
2010-12-29-Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)Nils Jacobs
2010-12-08second round name simplification. drop the <component>_ prefix.stepan
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
2010-11-22Drop per-board ram_check() calls for now.Uwe Hermann
2010-11-21Simplify a few code chunks, fix whitespace and indentation.Uwe Hermann
2010-11-21Drop excessive whitespace randomly sprinkled in romstage.c files.Uwe Hermann
2010-11-21Use DIMM0 et al in lots more places instead of hardocding values.Uwe Hermann
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
2010-11-05Add Kconfig CPU speed selection to Geode GX2 boards.Nils Jacobs
2010-11-05GX2: Define the unused DIMM1 to 0xFF to make it obvious it is a bogus value.Nils Jacobs
2010-11-01Change Geode GX2 to use the auto DRAM detect code from Geode LX.Nils Jacobs
2010-10-13Enable or disable the power button in KconfigPeter Stuge
2010-10-05Remove lib/ramtest.c-include from all CAR boards.Patrick Georgi
2010-09-27I missed these boards in a previous commit.Warren Turkal
2010-09-27All these boards already had the CACHE_AS_RAM option in their individualWarren Turkal
2010-09-25Drop some useless "../../../" in #includes (trivial).Uwe Hermann
2010-09-21Cut the crap.Uwe Hermann
2010-09-10Add support for LiPPERT Hurricane-LX (EPIC board with AMD Geode-LX,Jens Rottmann
2010-09-07Add support for LiPPERT Cool LiteRunner-LX (PC/104 board with AMDJens Rottmann
2010-09-07Set up an arbitrary amount of system memory on Geode LX, soAurelien Guillaume
2010-09-03Update RoadRunner and SpaceRunner config to get in sync with currentJens Rottmann
2010-08-31SMC_CONFIG is needed before the device tree is ready and some peopleJens Rottmann
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
2010-08-26Remove unused mainboard_config definitions. Trivial.Myles Watson
2010-08-26CONFIG_DEBUG_RAM_SETUP and CONFIG_DEBUG_SMBUS are only available if the board /Jens Rottmann
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
2010-07-28Let Geode GX2 use geode_post_code.h just like Geode LXNils Jacobs
2010-07-26This patch converts the Geode GX2 boards to CAR.Nils Jacobs
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
2010-06-10This commit updates the Geode LX GLCP delay control setup from the v2 way to ...Edwin Beasant
2010-06-01CONFIG_DEBUG is too generic. Remove it and replace it with CONFIG_DEBUG_SMBUSMyles Watson
2010-05-25Move CS5535 specific setup from GX2 driver to CS5535. Stefan Reinauer
2010-05-09Remove pc80/serial.c includes in ROMCC boards and includePatrick Georgi
2010-05-08Drop console/console.c and pc80/serial.c from mainboards'Patrick Georgi
2010-05-05Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster"Patrick Georgi
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 11:21:45 +0000