index
:
coreboot
2560p
820g2
autoport-hsw
broadwell_refcode
e6230
e7240_bdw
haswell-mrc
hp820g1
hp9480m
mec1322
Some coreboot project code with my work
vimacs
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
src
/
mainboard
/
msi
Age
Commit message (
Expand
)
Author
2009-11-06
Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb.
Uwe Hermann
2009-11-06
Split the two usages of __ROMCC__:
Myles Watson
2009-10-30
Allow per-northbridge and per-board VGA BIOS file name and PCI ID defaults.
Uwe Hermann
2009-10-28
Fix some builds with Kconfig.
Myles Watson
2009-10-26
cp src/mainboard/tyan/Makefile.k8_CAR.inc to src/mainboard/Makefile.k8_ck804.inc
Myles Watson
2009-10-26
Move src/mainboard/tyan/Makefile.s289x.inc to src/mainboard/Makefile.k8_CAR.inc.
Myles Watson
2009-10-26
Add kconfig menus for most chipset VIDEO_MB values.
Uwe Hermann
2009-10-26
Define some variables that were not defined. There are a couple left.
Myles Watson
2009-10-24
Major cleanups of the hard_reset() code and config in coreboot.
- supermicro/x6dhe_g/auto.c
2009-10-24
move all register fram definitions to arch/register.h
Stefan Reinauer
2009-10-23
Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses before
Myles Watson
2009-10-20
Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should be
Myles Watson
2009-10-20
Fix all board names in Kconfig as per wiki / vendor website.
Uwe Hermann
2009-10-17
Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/
Peter Stuge
2009-10-16
Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE.
Myles Watson
2009-10-16
Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop"
Peter Stuge
2009-10-16
Set default ROM sizes per-board to match the ROM chip that came
Uwe Hermann
2009-10-16
Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE.
Myles Watson
2009-10-15
Add CONFIG_GENERATE_* for tables so that the user can select which tables not
Myles Watson
2009-10-13
Add support for the MSI MS-6156 board.
Uwe Hermann
2009-10-07
Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boards
Uwe Hermann
2009-10-07
Fix trivial typo in Kconfig spotted by Peter, introduced by me.
Patrick Georgi
2009-10-07
Convert all "default y" options to "select FOO" (shorter).
Uwe Hermann
2009-10-07
Kconfig:
Patrick Georgi
2009-10-06
Use
Uwe Hermann
2009-10-05
PCI_ROM_RUN and CONSOLE_VGA are global options in Kconfig and
Uwe Hermann
2009-10-04
The new CBFS based build system requires the whole ROM to be accessible
Uwe Hermann
2009-10-04
This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.
Patrick Georgi
2009-10-03
Remove:
Patrick Georgi
2009-10-03
Remove duplicate and not too useful Kconfig board comments as
Uwe Hermann
2009-09-23
simplify source tree hierarchy: move files from sdram/ and ram/ to lib/
Stefan Reinauer
2009-08-28
Add kconfig support for all Intel 82810 (i810) boards.
Uwe Hermann
2009-08-26
Add kconfig support for all missing Intel 440BX based boards.
Uwe Hermann
2009-08-25
Replace PIRQ_TABLE with HAVE_PIRQ_TABLE, the former doesn't exist.
Uwe Hermann
2009-08-25
Various Kconfig and Makefile.inc fixes and cosmetics.
Uwe Hermann
2009-08-19
Reduce size of the romstage on various boards that fail to build on QA.
Patrick Georgi
2009-08-12
Kconfig!
Patrick Georgi
2009-08-11
Enable CBFS everywhere. All boards compiled for me (abuild tested),
Patrick Georgi
2009-07-11
Fix MS-6178 boot by setting unused device (CIR) to 'off' (trivial).
Uwe Hermann
2009-07-05
Enable onboard VGA on the MS-6178 (i810 chipset) board (trivial).
Uwe Hermann
2009-06-30
the tool chain settings should not be in renamed (as they will never live in
Stefan Reinauer
2009-06-30
This patch unifies the use of config options in v2 to all start with CONFIG_
Stefan Reinauer
2009-06-19
Undo my ugly commit that added uses clauses in lots of places instead of one.
Myles Watson
2009-06-19
Convert the MSI MS-6178 board to CBFS.
Uwe Hermann
2009-06-17
Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial.
Myles Watson
2009-06-06
When I started refactoring mainboard Config.lb, I added two different
Carl-Daniel Hailfinger
2009-06-03
Revert "CMOS: Add set_option and rework get_option."
Luc Verhaegen
2009-06-03
CMOS: Add set_option and rework get_option.
Luc Verhaegen
2009-05-29
enable/disable IDE 0/1 (Primary/Secondary) interfaces on the i82801xx southbr...
Joseph Smith
2009-05-02
Run dos2unix on all files:
Stefan Reinauer
[next]