Age | Commit message (Collapse) | Author |
|
files for targets without failover:
src/config/nofailovercalculation.lb (64 kB XIP)
src/config/nofailovercalculation128.lb (128 kB XIP)
Targets with other XIP sizes were ignored.
This patch moves XIP size back into mainboard code.
Benefits from this patch:
- src/config/nofailovercalculation128.lb is no longer needed
- Targets with XIP sizes besides 64k and 128k benefit from refactoring
- Conceptually, this makes the include files pure calculation files
without settings.
Abuild tested.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4348 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
(scan-build chokes on this)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4181 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
refactoring Config.lb became possible.
Factor out ROM size calculation from Config.lb.
This patch converts 87 boards (with and without USE_FAILOVER_IMAGE),
but it has to work around a parser bug.
89 files changed, 209 insertions(+), 2415 deletions(-)
A total of 2206 removed lines.
Abuild works for all changed boards on khepri.
Myles writes:
I've tested serengeti for the failover portion and s2892 for the
nofailover portion. ldoptions are exactly the same and they both boot
the same.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
now all have the same parameter order.
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS)
-I$(TOP)/src -I. -nostdinc -nostdlib -fno-builtin -Wall -Os -c -S
$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -o $@"
The idea behind this parameter order is:
- *FLAGS at the beginning.
- Use a common set of *FLAGS.
- Include files and directories listed afterwards.
- nostdinc, nostdlib, no-builtin tell the compiler this is standalone
code.
- Warnings. They do not influence source or compilation.
- Compilation strategy (small) and output mode (asm or binary).
- File to be compiled.
- Output name.
- $(DEBUG_CFLAGS) and -S are only used for asm output.
Other changes in this patch:
- src/supermicro/h8dme/Config.lb now uses $DEBUG_CFLAGS instead of
hardcoding the respective flags.
- $DEBUG_CFLAGS was added to asm outputting $CC calls:
supermicro/h8dme/Config.lb
lippert/roadrunner-lx/Config.lb
- $DISTRO_CFLAGS was added to some $CC calls in:
iwill/dk8_htx/Config.lb (CAR AP code)
supermicro/h8dmr/Config.lb (CAR AP code)
supermicro/h8dme/Config.lb (CAR AP code)
gigabyte/m57sli/Config.lb (CAR AP code)
gigabyte/ga_2761gxdk/Config.lb (CAR AP code)
amd/serengeti_cheetah_fam10/Config.lb (everywhere)
msi/ms7135/Config.lb (everywhere)
nvidia/l1_2pvv/Config.lb (CAR AP code)
-$CFLAGS was added to all $CC calls in:
amd/db800/Config.lb
amd/dbm690t/Config.lb
amd/norwich/Config.lb
amd/pistachio/Config.lb
amd/serengeti_cheetah/Config.lb
amd/serengeti_cheetah_fam10/Config.lb
arima/hdama/Config.lb
artecgroup/dbe61/Config.lb
asus/a8n_e/Config.lb
asus/a8v-e_se/Config.lb
asus/m2v-mx_se/Config.lb
broadcom/blast/Config.lb
digitallogic/msm800sev/Config.lb
gigabyte/ga_2761gxdk/Config.lb
gigabyte/m57sli/Config.lb
ibm/e325/Config.lb
ibm/e326/Config.lb
iei/pcisa-lx-800-r10/Config.lb
iwill/dk8_htx/Config.lb
iwill/dk8s2/Config.lb
iwill/dk8x/Config.lb
kontron/986lcd-m/Config.lb
lippert/roadrunner-lx/Config.lb
lippert/spacerunner-lx/Config.lb
msi/ms7135/Config.lb
msi/ms7260/Config.lb
msi/ms9185/Config.lb
msi/ms9282/Config.lb
newisys/khepri/Config.lb
nvidia/l1_2pvv/Config.lb
pcengines/alix1c/Config.lb
sunw/ultra40/Config.lb
supermicro/h8dme/Config.lb
supermicro/h8dmr/Config.lb
technexion/tim8690/Config.lb
tyan/s2735/Config.lb
tyan/s2850/Config.lb
tyan/s2875/Config.lb
tyan/s2880/Config.lb
tyan/s2881/Config.lb
tyan/s2882/Config.lb
tyan/s2885/Config.lb
tyan/s2891/Config.lb
tyan/s2892/Config.lb
tyan/s2895/Config.lb
tyan/s2912/Config.lb
tyan/s2912_fam10/Config.lb
tyan/s4880/Config.lb
tyan/s4882/Config.lb
- Use $@ wherever appropriate.
- Kill that evil CACHE_AS_RAM_AUTO_C variable.
- Trailing whitespace fixups on lines which were touched anyway.
We now only have 6 remaining different calls to $CC whereas before there
were 20.
If I am allowed to rename src/mainboard/kontron/986lcd-m/auto.c to
src/mainboard/kontron/986lcd-m/cache_as_ram_auto.c, we're down to 4
different calls.
If we can decide on the use of $CPU_OPT, we are down to 3 different
calls.
One additional point I'd like to clear up:
if ASSEMBLER_DEBUG
makedefine DEBUG_CFLAGS := -g -dA -fverbose-asm
end
"-dA -fverbose-asm" is only useful for asm output. For these flags,
DEBUG_CFLAGS is a total misnomer. What about calling them
DEBUG_ASMCFLAGS or somesuch?
"-g" should be controllable by a separate switch. It is useful even for
object code.
The following targets are broken by this patch because they contain
implicit declarations, but the error did not trigger due to missing
CFLAGS:
amd/serengeti_cheetah
asus/a8v-e_se
asus/m2v-mx_se
digitallogic/msm800sev
pcengines/alix1c
supermicro/h8dme
supermicro/h8dmr
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4097 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
in their Config.lb but never use it. There's no point in keeping
dead code around.
This patch removes ROMCC remainders from Config.lb and kills orphaned
auto.c and failover.c in the affected mainboard directories.
arima/hdama
ibm/e325
ibm/e326
iwill/dk8s2
iwill/dk8x
msi/ms9282
newisys/khepri
sunw/ultra40
tyan/s2891
tyan/s2892
tyan/s2895
tyan/s4880
tyan/s4882
Abuild log is completely identical with and without the patch.
With this patch, the last ROMCC remainders for K8 boards are gone.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4055 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
cause problems with certain toolchains. This patch will also safe some hard
disk space for those of us working on laptops or netbooks with always too small
disks.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3876 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
With this patch it's possible to
- determine the according source code line for each asm statement
(objdump -dS)
- determine the source code file for each asm statement
(objdump -ddl)
This isn't exactly trivial because cache_as_ram_auto.c gets compiled to
assembly and converted by a perl script afterwards.
This patch solves the problem
- by extending cache_as_ram_auto.inc with debug information and line
numbers
- by correcting the perl calls (".text" --> "\.text")
- by creating a disassembly with source code and line numbers.
(ctr0.disasm and
coreboot.disasm)
There's one minor downside to the patch: A complete abuild run takes up
around 1.6G instead of about 700MB now. But I'm sure this is quite
reasonable for the benefits.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Please commit while this is being worked out.
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
targets/*/*/Makefile
targets/*/*/normal/Makefile
targets/*/*/fallback/Makefile
to use a common copy of romcc, and to leave this compiler untouched by
'make clean' in targets/*/*/fallback/ and targets/*/*/normal/ .
'make clean' in targets/*/*/ will clean romcc.
Thanks to Mats for the initial idea and implementation of a tool to do
this. This patch has almost the same behaviour as the original tool
without having to run the tool each time.
Tested for abuild-friendliness.
The patch saves ~10-12 seconds for every target using romcc. For a full
abuild run, this is ~20% time saved.
For the first 38 abuild targets, total build time is down to 13m24s
instead of 16m22s on my machine.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Mats Erik Andersson <mats.andersson@gisladisker.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3564 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
DISTRO_CFLAGS were not being
included on the CC line for cache_as_ram_auto.c
Tested on ubuntu, where formerly it failed.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3079 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Due to the automatic nature of this update, I am self-acking. It worked in
abuild.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3053 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
> superiotool r2922
> Found Winbond W83627HF/F/HG/G (id=0x52, rev=0x0d) at 0x2e
Don't use the non-working trident driver for the blade3d (onboard vga
in the rom emulator has not been tested either)
It also adds some preliminary CAR support to the board, so it has a chance to
build again.
This board was broken since a couple of months, and the changes are minimal, so
I consider this a trivial change -- It doesn't change anything that was used,
obviously
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2926 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
(Patch 2, refs #14)
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2529 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
will then rename the src/superio/NSC directory to src/superio/nsc.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2472 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2234 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
1. x86_setup_mtrr take address bit.
2. generic ht, pcix, pcie beidge...
3. scan bus and reset_bus
4. ht read ctrl to decide if the ht chain
is ready
5. Intel e7520 and e7525 support
6. new ich5r support
7. intel sb 6300 support.
yhlu patch
1. split x86_setup_mtrrs to fixed and var
2. if (resource->flags & IORESOURCE_FIXED ) return; in device.c pick_largest_resource
3. in_conherent.c K8_SCAN_PCI_BUS
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
chip for the amdk8/root_complex
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1750 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- Move pci_set_method out of hardwaremain.c
- Re-add debugging name field but only include the CONFIG_CHIP_NAME is
enabled. All instances are now wrapped in CHIP_NAME
- Many minor cleanups so most ports build.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1737 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- Rename chip_config chip_operations throughout the tree
- Fix Config.lb on most of the Opteron Ports
- Fix the amd 8000 chipset support for setting the subsystem vendor and device ids
- Add detection of devices that are on the motherboard (i.e. In Config.lb)
- Baby step in getting the resource limit handling correct, Ignore fixed resources
- Only call enable_childrens_resources on devices we know will have children
For some busses like i2c it is non-sense and we don't want it.
- Set the resource limits for pnp devices resources.
- Improve the resource size detection for pnp devices.
- Added a configuration register to amd8111_ide.c so we can enable/disable individual ide channels
- Added a header file to hold the prototype of isa_dma_init
- Fixed most of the superio chips so the should work now, the via superio pci device is the exception.
- The code compiles and runs so it is time for me to go to bed.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1698 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Although it is not used currently, misuse of terminolog is still a misuse.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1548 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1492 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Unified AMD K8 reset function that can be customized via mainboard Config.lb
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1471 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1445 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- Reworked pnp superio device support. Now complete superio support is less than 100 lines.
- Added support for hard coding resource assignments in Config.lb
- Minor bug fixes to romcc
- Initial support for catching the x86 processor BIST error codes. I've only seen
this trigger once in production during a very suspcious reset but...
- added raminit_test to test the code paths in raminit.c for the Opteron
- Removed the IORESOURCE_SET bit and added IORESOURCE_ASSIGNED and IORESOURCE_STORED
so we can tell what we have really done.
- Added generic AGP/IOMMU setting code to x86
- Added an implementation of memmove and removed reserved identifiers from memcpy
- Added minimal support for booting on pre b3 stepping K8 cores
- Moved the checksum on amd8111 boards because our default location was on top of
extended RTC registers
- On the Hdama added support for enabling i2c hub so we can get at the temperature
sensors. Not that i2c bus was implemented well enough to make that useful.
- Redid the Opteron port so we should only need one reset and most of memory initialization
is done in cpu_fixup. This is much, much faster.
- Attempted to make the VGA IO region assigment work. The code seems to work now...
- Redid the error handling in amdk8/raminit.c to distinguish between a bad value
and a smbus error, and moved memory clearing out to cpufixup.
- Removed CONFIG_KEYBOARD as it was useless. See pc87360/superio.c for how to
setup a legacy keyboard properly.
- Reworked the register values for standard hardware, moving the defintions from
chip.h into the headers of the initialization routines. This is much saner
and is actually implemented.
- Made the hdama port an under clockers BIOS. I debuged so many interesting problems.
- On amd8111_lpc added setup of architectural/legacy hardware
- Enabled PCI error reporting as much as possible.
- Enhanded build_opt_tbl to generate a header of the cmos option locations so
that romcc compiled code can query the cmos options.
- In romcc gracefully handle function names that degenerate into function pointers
- Bumped the version to 1.1.6 as we are getting closer to 2.0
TODO finish optimizing the HT links of non dual boards
TODO make all Opteron board work again
TODO convert all superio devices to use the new helpers
TODO convert the via/epia to freebios2 conventions
TODO cpu fixup/setup by cpu type
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1390 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1263 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1236 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1230 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1162 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1124 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
for paths
- Renamed some configuration variables
SMP -> CONFIG_SMP
MAX_CPUS -> CONFIG_MAX_CPUS
MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS
- Removed some dead configuration variables
MAX_CPUS -> CONFIG_MAX_CPUS
MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS
SMP -> CONFIG_SMP
FINAL_MAINBOARD_FIXUP
SIO_BASE
SIO_SYSTEM_CLK_INPUT
NO_KEYBOARD
USE_NORMAL_IMAGE
SERIAL_CONSOLE
USE_ELF_BOOT
ENABLE_FIXED_AND_VARIABLE_MTRRS
START_CPU_SEG
DISABLE_WATCHDOG
ENABLE_IOMMU
AMD8111_DEV
- Removed some assembly files that are no longer needed
killed src/southbridge/amd/amd8111/smbus.inc
killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc
killed src/ram/ramtest.inc
- Updates to config.g so that it works more reliably and has initial support
for paths
- Renamed some configuration variables
SMP -> CONFIG_SMP
MAX_CPUS -> CONFIG_MAX_CPUS
MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS
- Removed some dead configuration variables
MAX_CPUS -> CONFIG_MAX_CPUS
MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS
SMP -> CONFIG_SMP
FINAL_MAINBOARD_FIXUP
SIO_BASE
SIO_SYSTEM_CLK_INPUT
NO_KEYBOARD
USE_NORMAL_IMAGE
SERIAL_CONSOLE
USE_ELF_BOOT
ENABLE_FIXED_AND_VARIABLE_MTRRS
START_CPU_SEG
DISABLE_WATCHDOG
ENABLE_IOMMU
AMD8111_DEV
- Removed some assembly files that are no longer needed
killed src/southbridge/amd/amd8111/smbus.inc
killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc
killed src/ram/ramtest.inc
killed src/sdram/generic_dump_spd.inc
killed src/sdram/generic_dump_spd.inc
- Updated the arima/hdama to build with the new configuration system
- Updated config.g to list all of the variables with make echo
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1090 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|