summaryrefslogtreecommitdiff
path: root/src/mainboard/purism
AgeCommit message (Collapse)Author
2019-05-14soc/intel/broadwell: Clean up the bootflowArthur Heymans
Call the raminit from a common location instead of from the mainboard specific code. Change-Id: I65d522237a0bb7b2c032536ede10e2cf93c134d8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32760 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-14soc/intel/broadwell: Don't use a pointer for pei_dataArthur Heymans
To improve the bootflow, the scope of the pei_data needs to be extended. Change-Id: Ic6d91692a7bf9218b81da5bb36b5b26dabac454e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-05-14soc/intel/broadwell: Move GPIO init to a common placeArthur Heymans
This also links the gpio configuration instead of including it as a header. Change-Id: I9309d2b842495f6cff33fdab18aa139a82c1959c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-05-07mb/purism/librem_skl: Refactor to get rid of `pei_data`Nico Huber
The SoC specific `struct pei_data` was filled with values that were never consumed anywhere again. So just merge the used code into `romstage.c` where it's effectively used. Change-Id: I499b3cfcdd5400ea132749555d433a2d8a9471a3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-06purism/librem_skl: remove 13v3 target, clean up KconfigMatt DeVillier
Remove the Librem 13v3 as a separate board; instead build a single firmware image for the 13 v2/v3 boards. Clean up Kconfig options: - remove entries for 13v3 board - fold entries into a single line where possible - remove redundant MAINBOARD_VERSION option (will default to 1.0) - remove unused microcode length/location (only needed for FSP CAR) Test: build/boot Librem 13 v2/v3 boards with same image Change-Id: Ic09b8ec5c576f4c4c48ef30ee3f60a4c2c286cd3 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-06{mb,soc/intel/skylake}: remove unused InternalGfxMaxim Polyakov
The InternalGfx option in devicetree.cb is not used to enable iGPU. The patch removes this option from chip.h and mb/*/devicetree.cb files for all boards with skl/kbl processor. Change-Id: I41ecca3fdfb1d4b20ee634a13263ff481dcf440e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-20src: Use 'include <string.h>' when appropriateElyes HAOUAS
Drop 'include <string.h>' when it is not used and add it when it is missing. Also extra lines removed, or added just before local includes. Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-12src: Drop unused 'include <arch/acpigen.h>'Elyes HAOUAS
Use <arch/acpi.h> when appropriate. Change-Id: I05a28d2c15565c21407101e611ee1984c5411ff0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-01soc/intel/skylake: Unify serial IRQ optionsNico Huber
We had two ways to configure the serial IRQ mode. One time in the devicetree for FSP and one time through Kconfig for coreboot. We'll use `enum serirq_mode` from soc/intel/common/ as a devicetree option instead. As the default is `quiet mode` here and that is the most common mode, this saves us a lot of lines. In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting settings in devicetree and Kconfig. We'll maintain the `continuous` selection, although it might be that coreboot overrode this earlier on the kblrvps. Note: A lot of Google boards have serial IRQ enabled, while the pin seems to be unconnected? Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-01ACPI: Rename FADT model and set it to zeroElyes HAOUAS
INT_MODEL defined in ACPI 1.0 and renamed to reserved since V 2.0. The value for this field is zero but 1 is allowed to maintain compatibility with ACPI 1.0. So set this value to zero as we are using greater version than ACPI 1.0. Change-Id: I910ead4e5618c958a7989f4c309a3a4bb938e31a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29986 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: David Guckian Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-21ACPI: Correct asl_compiler_revision valueElyes HAOUAS
Change-Id: I91b54b43c8bb5cb17ff86a6d9afa95f265ee49df Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-02-18soc/intel/skylake: Use real common code for VMX initNico Huber
Use the common VMX implementation, and set IA32_FEATURE_CONTROL lock bit per Kconfig *after* SGX is configured (as SGX also sets bits on the IA32_FEATURE_CONTROL register). As it is now correctly based on a Kconfig, the `VmxEnable` devicetree setting vanishes. Test: build/boot google/[chell,fizz], observe Virtualization enabled under Windows 10 when VMX enabled and lock bit set. Change-Id: Iea598cf74ba542a650433719f29cb5c9df700c0f Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/29682 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23mb/purism/librem_skl: add 13v3 variantMatt DeVillier
The 13v3 is just a 13v2 with TPM added, so duplicate 13v2 config and change strings where needed. Leave MAINBOARD_PART_NUMBER unchanged since boards were initially shipped with 13v2 firmware, and changing it now would cause flashrom to throw a board mismatch error. Change-Id: I1a5e4c84cc9444bb9731b6dcc4de2ce7427dbbb1 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/31010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-23mb/purism/librem_skl: add support for 13v4/15v4 boardsMatt DeVillier
Add support for Kabylake Librem 13v4/15v4 boards, reusing existing 13v2/15v3 variants since board design unchanged (only SoC). Adjust identification strings, add Kabylake VGA PCI ID. Change-Id: Ia795b9c7373ea2e2acd3bef309320b58e9e8449d Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/31009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-23mb/purism/librem_skl: adjust CBFS_SIZEMatt DeVillier
Adjust default CBFS_SIZE to match that used in configs for building Change-Id: Ibe1312560a923dcdefb8af52a721ab76c0b08a2e Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/31008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-16mb/purism: Select NO_POST instead of overriding its dependenciesNico Huber
Declaring a Kconfig symbol ahead to override its default also always sets implicit dependencies. If the original symbol doesn't have any, Kconfig gets confused. Change-Id: Ie6d9ca96e4b6037eefd432dd386cb5e540deb0ed Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-11soc/mainboard: Update mainboard UART KconfigLijian Zhao
After f5ca922 (Untangle CBFS microcode updates) got merged, all mainboard using intel apollolake, cannonlake, coffeelake, glk, kabylake, skylake, icelake and whiskeylake get affected. Using INTEL_LPSS_UART_FOR_CONSOLE instead of UART_DEBUG and set default console for each platform. BUG=N/A TEST=Build and test on Sarien platform, by default we can still get console from cbmem, and enable CONSOLE_SERIAL can get logs from UART port 2. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I550a00144cff21420537bb161c64e7a132c5d2de Reviewed-on: https://review.coreboot.org/c/30853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-06device: Use pcidev_path_on_root()Kyösti Mälkki
Change-Id: I2e28b9f4ecaf258bff8a062b5a54cb3d8e2bb9b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-11-30cpu/intel/common: Use a common acpi/cpu.asl fileArthur Heymans
Change-Id: Ifa5a3a22771ff2e0efa14fb765603fd5e0440d59 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian
2018-11-23mb: Set coreboot as DSDT's manufacturer model IDElyes HAOUAS
Field 'OEMID' & "OEM Table ID" are related to DSDT table not to mainboard. So use macro to set them respectvely to "COREv4" and "COREBOOT". Change-Id: I060e07a730e721df4a86128ee89bfe168c69f31e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian
2018-11-21ACPI: Fix DSDT's revision fieldElyes HAOUAS
DSDT revision is =1 for ACPI v1 and =2 for greater ACPI version. This will cause the AML interpreter to use 32-bit integers and math if the version is 1, and 64-bit if the version is >=2. Current spec version is 2 for ACPI 6.2-a. Change-Id: I77372882d5c77b7ed52dcdd88028403df6f6fa7f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29626 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetreePeter Lemenkov
Change-Id: Ic9620cfa1630c7c085b6c244ca80dc023a181e30 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-08-27update all FADT version 3.0 to use the get tables functionMarc Jones
Most FADT report using ACPIv3 FADT table. Using the get revision function keeps the table versions in sync. Change-Id: Ie554faf1be65c7034dd0836f0029cdc79eae1aed Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-13soc/intel/broadwell/Kconfig: Clean up redefined config optionsArthur Heymans
All broadwell board set HAVE_IFD_BIN to default n, overloading the option in soc, therefore just use the defaults in sb/intel/common/firmware. Change-Id: I250dbbc9d61ecedc1a1eb48751ad966732604349 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28011 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11skylake: Remove "IshEnable"li feng
Remove "IshEnable" from soc_intel_skylake_config since it's not used anymore. Enable/disable ISH by checking if ISH device is turned on or not. Refer to https://review.coreboot.org/#/c/coreboot/+/26485/. BUG=b:79244403 BRANCH=none TEST=Built. Change-Id: I4d2889af118659852431c87cb516fd19b577efc5 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-14src: Get rid of unneeded whitespaceElyes HAOUAS
Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
Adding common chip config structure which will be used to return data to common code. When common code requires soc data, code used to fetch entire soc config structure. With this change, common code will only get the data/structure which is required by common code and not entire config. For now, adding i2c, gspi and lockdown configuration which will be used by common code. BUG=none BRANCH=b:78109109 TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check values are returned properly using common structure. Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26189 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-05soc/intel/skylake: Add option to skip coreboot MP initSubrata Banik
This patch provides option for mainboard to skip coreboot MP initialization if required based on use_fsp_mp_init. Option for mainboard to skip coreboot MP initialization * 0 = Make use of coreboot MP Init * 1 = Make use of FSP MP Init Default coreboot does MP initialization. Change-Id: I8de24e662963f4600209ad1b110dc950ecfb3a27 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26818 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-11purism/librem_bdw: Rename Broadwell baseboard from BDL to BDWYouness Alaoui
My bad, it seems the acronym for Broadwell is BDW, and not BDL, so I'm renaming librem_bdl into librem_bdw and changing the KConfig options accordingly. Change-Id: I8e992aa3474863236adf8893fcbe37c1b801fa25 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/26237 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-11purism/librem_bdl: Add support for Librem 15 v2Youness Alaoui
Adding new librem_bdl variant for the Librem 15 v2, which is very similar to Librem 13 v1, with the following differences: - SATA ports 0 and 1 instead of 0 and 3 - SATA DTLE IOBP value is 7 instead of 9 for port 0 - There is no LAN device - There are two SODIMM slots, and DQs are interleaved - USB ports are different Change-Id: Ifaca382a540d085e6c919daa992a0fbd52643a5b Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/26184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-11purism/librem_bdl: Convert to variant setupYouness Alaoui
Convert the purism/librem13v1 to a variant setup, in preparation for adding the librem15v2 board as a new variant. The Librem 13 v1 and Librem 15 v2 are nearly identical, so this minimizes new code to add support for the latter. Also update the URL in board_info to an archive.org link. Change-Id: I00bb82b9e895e2464ddaa92915c01ce0e35933a2 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/26183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-08purism/librem13v1: Fix space->tabs and disable ME pci deviceYouness Alaoui
Change-Id: I7ffcea7bff988d3d4269e1334fc938932aed2eb4 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/26106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-08purism/librem13v1: Disable PCI Express AER capabilityYouness Alaoui
The Librem 13v1 does not seem to have working AER and this option was needed and tested on the Librem 13v1. Without it, the linux console gets spammed with AER errrors. Change-Id: I13d0afa085b426920d7a946e6209f924ce29ae52 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/25327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-06purism/librem_skl: Add AC/DC LoadLine to VR ConfigYouness Alaoui
The FSP 2.0 needs to set the ac_loadline and dc_loadline for each VR config. Without it, the Loadline is considered to be 0 mOhm and this causes CPU temp to jump all over the place whenever the CPU is used. This is necessary since there are no VR_CONFIG icc mappings for Skylake SKUs, only KabyLake. These values were copied from the Google Poppy devicetree. Change-Id: I6aeb6ee521988b94f2ae94a60d1a28b87ba984d4 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/25324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-06purism/librem_skl: Set TCC Activation at 95CYouness Alaoui
Set the Thermal Control Circuit (TCC) activaction value to 95C even though FSP integration guide says to set it to 100C for SKL-U (offset at 0), because when the TCC activates at 100C, the CPU will have already shut itself down from overheating protection. This was tested on Purism Librem 13 v2. A bisect showed that the immediate shutdowns happened after commit [1] was merged which led to this solution. [1] ec5a947b (soc/intel/skylake: make tcc_offset take effect) Change-Id: Idfc001c8e46ed3b07b24150c961c4b9bc9b71a62 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-06purism/librem_skl: Enable VMX and Intel SpeedStep in devicetreeYouness Alaoui
Although VmxEnable is currently ignored by FSP, a forthcoming patch explicitly enables it in coreboot, so set it in anticipation of that. Enable Intel SpeedStep to ensure the ACPI tables are generated for the C-states/P-states which are required for the xen-acpi-processor module to be loaded. Without it, the Qubes 4.0-rc4 installer will complain at boot about modules that could not be loaded. Change-Id: I968ef36ec9382a10db13d96fd3a5c0fc904db387 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-06purism/librem_skl: Enable TPM supportYouness Alaoui
Change the GPIO to match the TPM-enabled motherboards, and add TPM support in devicetree and enable the config. After changing the GPIO table, the librem 13v2 and librem 15v3 now have the same GPIOs, so use a single gpio.h file instead of one file per variant. Change-Id: I425654c1c972118aa81c27961246238c2eef782d Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/23683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-03-28soc/intel/skylake: Limit xDCI feature when VBOOT is enabledDuncan Laurie
Use the common xDCI function to check if the controller is allowed in the current mode before enabling it. Otherwise, disable the PCI device if it has been enabled in devicetree. To make the SOC behavior consistent the XdciEnable config option is removed in favor of direct control by devicetree.cb and the mainboards that had defined it were adjusted accordingly. This was tested on an Eve board with xDCI enabled in devicetree.cb to ensure the xDCI device is enabled in developer mode and disabled in normal mode. Change-Id: Ic3c84beac87452f17490de32082030880834501d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25365 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-26ec/purism: Fix CPU Turbo value (PPCM) set by the ECYouness Alaoui
The EC needs to set the PPCM value depending on whether Turbo is enabled or not, and the values differ between Broadwell (0, 1) and Skylake (1, 2) platforms. Change-Id: I662dce54415e685c054ffc00b6afde0f1f7765e2 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/25329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-03-26purism/librem13v1, librem13v2, liberm15v3: Fix EC LPC I/O portYouness Alaoui
The LPC I/O ports for EC communication were not set properly, causing ectool to fail to read the Index I/O from the EC. The EC Index I/O is on port 0x380 and the LPC I/O port needs to be decoded by the PCI device for it to be accessible. Correct the value for the Librem 13v1, 13v2 and 15v3. Change-Id: Ide1d158340eadfabbce5f70ceccddfabb4db188a Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/25328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-12-22purism/librem_skl: Improve boot time by enabling SPD Word ReadYouness Alaoui
This speeds up the SPD read ('calling FspMemoryInit' phase) from 218ms to 134ms consistently. Tested on both the Librem 13 v2 and Librem 15 v3. Change-Id: I44fbe96c256972bd074537159771d61fe7adf082 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/22969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-12-11mainboard/purism/librem_skl: Fix line length > 80 charactersMartin Roth
Make lint-stable was giving an error on this. Change-Id: I06d11d86151f683b82b6df537e3de8c52d33e8b4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2017-10-26purism/librem_skl: add new variant Librem 15 v3Matt DeVillier
Add new board librem15v3 as a variant of the librem_skl baseboard. Changes from the librem13v2: - Change board name and version - Change GPIO A18, A19, A20, D9, D10 and D11 from NC to GPIO - Enable PCI device 1c.4 - Change USB port definitions in devicetree TEST: build w/SeaBIOS, boot PureOS on Librem 15 v3 hardware Change-Id: I7c762a34f5b961c908e4a29ec331da4b0dea9986 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22048 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-26purism/librem13v2: convert to variant setupMatt DeVillier
Convert the Purism Librem13v2 board to a variant setup, in preparation of adding the librem15v3 as a new variant. The 13v2 and 15v3 are nearly identical, so this minimizes new code to add support for the latter. Change-Id: I5d648cdb8f63c03de5474253203b3d0853673294 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22047 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-23purism/librem13v2: migrate from FSP 1.1 to 2.0Matt DeVillier
Migrate the Librem13v2 from using FSP 1.1 to the public/GitHub FSP 2.0 Skylake/Kabylake release: - select FSP 2.0 in Kconfig - adjust romstage/ramstage functions as required - refactor pei_data functions - remove VR_RING domain from devicetree (unsupported in FSP 2.0) - add SataSpeedLimit parameter to work around power-related issue when operating at SATA 6.0Gbps speed TEST: build/boot Librem13v2, observe successful boot, lack of SATA-related errors in dmesg. Change-Id: Iedcc18d7279409ccd36deb0001567b0aa5197adf Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-22purism/librem13v2: Update microcode length in CBFSYouness Alaoui
Microcode blob has been updated, so update the length to match Change-Id: I46ac10e5c6cd6492c98a7034649797f301101abc Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-22purism/librem13v2: Fix USB settings and set OC pinYouness Alaoui
The USB settings were wrong in some places, or missing and the USB_OC values were taken from the schematics. Change-Id: I29b564a4161c486f5e8556b1726471bfa2351b7a Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/22043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-22purism/librem13v2: Update devicetree settingsYouness Alaoui
Disable SataDevSlp and update other values to match vendor/AMI firmware. Change-Id: I6f278be54b86450575c366d68bfa6a67575b0fdd Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-22purism/librem13v2: Change DRAM Rcomp/DQS valuesYouness Alaoui
The RComp values have been updated to match what is shown in the schematics. Extracting the Memory configuration blob from the original BIOS (A blob which contains the correct binary sequence matching the RComp values appears in object with GUID 2D27C618-7DCD-41F5-BB10-21166BE7E143), I could find and confirm the DQ and DQS mapping. Small code cleaning in romstage.c with no effect. Change-Id: I35c734269b365fd759e9bd56224a80a8a8df5a57 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/22041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2017-10-22purism/librem13v2: Add reading of serial number from CBFSYouness Alaoui
Check CBFS for 'serial_number' field, and use value if exists; otherwise use value set at compile time. Change-Id: I4b50f6310ca32b9dd372db075a5b5729e3b06619 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/22040 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>