summaryrefslogtreecommitdiff
path: root/src/mainboard/purism
AgeCommit message (Collapse)Author
2020-11-06mb/purism/librem_mini: Set unused GPIO pads to PAD_NCMatt DeVillier
Set numerous pads to PAD_NC as per board schematics (they are either NC, or connected to test pads), and adjust comments as needed. Change-Id: I4c2ab936256d0031d7a127fbeac42c8951a0b39f Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-05mb/purism/librem_mini: Drop DW0/DW1 from GPIO config commentsMatt DeVillier
These are generated by inteltool + intelp2m and reflect the pad configuration of the vendor (AMI) firmware at a specific point in time, but do not always reflect the correct configuration of a given pad as per the schematics, so drop them. Change-Id: Ie337cca5bc0e87a5426cceae8d7ec29ab14a1729 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47200 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_cnl: Set SaGv to FixedHighAngel Pons
Since the Librem Mini does not run on battery power, SaGv has little benefits and noticeably slows down testing, since memory training is run twice. Disabling SaGv cuts the 30-second cold boot time in half. Change-Id: Ib02e42dcb4f20fdbdca85456c0dceafc59c782d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-11-04mb/purism/librem_mini: Drop community comments in GPIO configMatt DeVillier
These add nothing useful to the GPIO config Change-Id: Ieecc9bd67d020e141c3a1f1d387034df5e563068 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47190 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Update GPIO configMatt DeVillier
Update GPIO config using a fresh dump of inteltool from the vendor (AMI) firmware on a Librem Mini v2, run through intelp2m with parameters '-p cnl -n -ii' Change-Id: I747415fb9ab7b21943d256d248729cb9e2b4b945 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47206 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism_librem_mini: Add child device, slot descriptions to PCIe RPsMatt DeVillier
Change-Id: Id306100fc691dcbde48b65092d0be9d7e73c0722 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47189 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Reorganize devicetreeMatt DeVillier
Move registers under devices to which they belong. Change-Id: I61ca7c1db02646252d7421f8b79dfc8a40b2bdb5 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47188 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: drop unused HeciEnabled registerMatt DeVillier
this should have been corrected as part of: commit 3de90d1 [soc/intel/cnl: Set Heci1Disable depending on devicetree config] Change-Id: I6a103a1de01fc258ef359258a8a64f4c5a181139 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47187 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Increase TDP/PL2 settingMatt DeVillier
PL2 was set artificially low during development when the active cooling fan was not functional, and never corrected once the fan was fixed. Raise PL2 to a value which works with both Librem Mini variants. Change-Id: Ie377392020f73359aed80ddae727adb6f8d06344 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-04mb/purism/librem_mini: Drop devicetree settings which default to 0Matt DeVillier
All chip registers default to 0, no need to explicitly set them. Change-Id: I056121170d22393484b0ee79bd0815452161a900 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-04mb/purism/librem_mini: drop SendVrMbxCmd from devicetreeMatt DeVillier
Not needed for this board. Change-Id: I15a68b59bc512e571b9590007ea64561b3f3dae1 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-03soc/intel/broadwell: Relocate PCH ACPI filesAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I7f87085c70149d02c544e2d43e1bdb58c7502d6d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46754 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03mb/purism/librem_cnl: Adjust in preparation for new variantsMatt DeVillier
- Move the SoC select to board config (vs baseboard config) - Qualify the VGA PCI ID and CBFS size values based on board selection - Move devicetree to variant dir and add Kconfig entry - Use a separate board_info.txt for the baseboard and each variant Change-Id: I4764f2c1243ea49bd08e0735865cc3cb7a66441f Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-03mb/purism/librem_whl: rename to librem_cnlMatt DeVillier
Since Whiskeylake SoC code is actually a subset of soc/intel/cannonlake, rename the baseboard so that boards using other 'cannonlake family' SoCs (e.g., Cometlake) can be added with minimal confusion. Rename the mainboard dir and baseboard name, and adjust any references to them. Change-Id: I2af7977f1622070eb8bf8449bc8306f9d75b9851 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-30soc/intel/broadwell: Separate PCH in devicetreeAngel Pons
Flesh out the PCH configuration into a separate chip. Keep it within the Broadwell SoC directory for now, to ease moving files around. The boards were prepared beforehand and the devicetrees require next to no changes. Tested on out-of-tree Acer Aspire E5-573, still boots. Change-Id: I28d948f3e6d85e669d12b29516d867c1d1ae9e1a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46700 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30mb/purism/librem_bdw: Prepare devicetree for PCH splitAngel Pons
Tested with BUILD_TIMELESS=1, all variants remain identical. Change-Id: I0fe6de35f7471ce173df40db1444153623544f00 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46705 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
The dt option `speed_shift_enable` is obsolete now. Drop it. Change-Id: I5ac3b8efe37aedd442962234478fcdce675bf105 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-10-21soc/intel,mb/*: get rid of legacy pad macrosMichael Niewöhner
Get rid of legacy pad macros by replacing them with their newer equivalents. TEST: TIMELESS-built board images match Change-Id: I078f9bb3c78f642afc6dcfd64d77be823a4485c2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-19mb/purism/librem_skl: Clean up FSP-M RCOMP settingsAngel Pons
There's no need to use static functions to fill these settings in. Also, add missing include for <stdint.h> and initialize `mem_cfg` in one line. Change-Id: I82b0997846d4ec40cf9b1a8ebfb1e881b194e078 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46252 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-14mb/purism/librem_skl: Drop DQ and DQS byte mapsAngel Pons
These settings are not necessary for DDR4 and can be dropped. Change-Id: I1946be239f0c90db995a60570474039cef45cfa9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-05soc/intel/common/block/acpi: Factor out common platform.aslSubrata Banik
This patch moves platform.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify _PIC method present inside common platform.asl is still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I5189b03d6abfaec39882d28b40a9bfa002128be3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-28mb/purism/librem_whl: Drop 3Gbps SATA limit; enable and set SATA tuning paramsMatt DeVillier
Some Librem Minis exhibit issues with 6Gbps SATA operation on certain SSDs, setting the Receiver Equalization Boost Magnitude adjustment resolves this, so limiting SATA speeds to 3Gbps is no longer needed. Test: build/boot Librem Mini with Crucial SATA SSD, observe no issues booting, no ATA-related errors in dmesg on PureOS 10 / kernel 5.8.7 Change-Id: I8b3cbcff7f181bcab35d71e859033578c822bb20 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-28mb/purism/librem_skl: Enable and set SATA tuning paramsMatt DeVillier
Some Librems have issues with 6Gbps SATA operation on certain SSDs, setting the Receiver Equalization Boost Magnitude adjustment resolves this. Test: build/boot Librem 15v3 with Crucial SATA SSD, observe no issues booting, no ATA-related errors in dmesg on PureOS 10 / kernel 5.8.7 Change-Id: I078deeff7fc54694393b5b16c41c5d622b332781 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08soc/intel/broadwell: Drop `gpu_panel_port_select`Angel Pons
The corresponding bits in PP_ON_DELAYS are reserved MBZ. Change-Id: I9789a7d50c4bce2ccad0bf476f877db25e3ff82e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
Setting USBx_PORT_EMPTY is not a requirement anymore, since unset devicetree settings default to 0 and the OC pin now only gets set when the USB port is enabled (see CB:45112). Thus, drop the setting from all devicetrees. Change-Id: I899349c49fa7de1c1acdca24994ebe65c01d80c6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-09-04soc/intel/cnl: Enable HECI3 depending on devicetreeFelix Singer
Currently HECI3 gets enabled by the option Heci3Enabled, but this duplicates the devicetree on/off options. Therefore depend on the devicetree for enablement of the HECI3 controller. All corresponding mainboards were checked if the devicetree configuration matches the Heci3Enabled setting, and divergent devicetrees were adjusted. Change-Id: Ic7d52096aee225c2ced1e1bc29ca850fe5073edc Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44579 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-23soc/intel/cnl: Configure FSP option PcieRpSlotImplementedNico Huber
Allow configuring FSP option PcieRpSlotImplemented. Also, update all related devicetrees and configure PcieRpSlotImplemented to keep the current behaviour. Change-Id: I6c57ab0ae50a37cd9a90786134e9056851a86a3c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-08-21mb/purism/librem_whl: Convert GPIOs to macrosMatt DeVillier
Convert raw GPIOs to coreboot macros using newly-added support for Cannon/Whiskey/Coffee/Cometlake SoCs to intelp2m Test: build/boot Librem Mini, no smoke released. Change-Id: I6ac747ad4e650c24d2b7e34228ff74140c51a0c1 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-18mb/purism/librem_whl: Add new board Librem Mini (WHL-U)Matt DeVillier
Add new librem_whl baseboard and Librem Mini variant. Tested with SeaBIOS, Tianocore, and Heads payloads. All functions working normally except SATA, which is limited via a FSP UPD to 3Gbps until the correct HSIO PHY settings can be determined. https://puri.sm/products/librem-mini/ Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I36af42766f85eb17f86f6ec9b48b87125fb911e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-08soc/intel/skylake: Enable CIO depending on devicetree configurationFelix Singer
Currently, CIO gets enabled by the option Cio2Enable, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the CIO controller. All corresponding mainboards were checked if the devicetree configuration matches the Cio2Enable setting, and missing entries were added. Change-Id: I65e2cceb65add66e3cb3de7071b1a3cc967ab291 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44032 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-08soc/intel/skylake: Enable SDXC depending on devicetree configurationFelix Singer
Currently, SDXC gets enabled by the option ScsSdCardEnabled, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the SDXC controller. All corresponding mainboards were checked if the devicetree configuration matches the ScsSdCardEnabled setting, and missing entries were added. Change-Id: I298b7d0b0fe2a7346dbadcea4be22dc67fce4de8 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-07soc/intel/skylake: Enable thermal subsystem depending on devicetreeFelix Singer
Currently SA thermal subsystem gets enabled by the option Device4Enable, but this duplicates the devicetree on/off options. Therefore depend on the devicetree for enablement of the SA thermal subsystem controller. All corresponding mainboards were checked if the devicetree configuration matches the Device4Enable setting, and missing entries were added. Change-Id: I7553716d52743c3e8d82891b2de14c52c6d8ef16 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44026 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable HDA depending on devicetree configurationFelix Singer
Currently HDA gets enabled by the option EnableAzalia, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the HDA controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableAzalia setting. Change-Id: Id20d023b2f286753fb223050292c7514632e1dd3 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43866 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable eMMC depending on devicetree configurationFelix Singer
Currently eMMC gets enabled by the option ScsEmmcEnabled, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the eMMC controller. I checked all corresponding mainboards if the devicetree configuration matches the ScsEmmcEnabled setting. Change-Id: I3b86ff6e2f15991fb304b71d90c1b959cb6fcf43 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-29soc/intel/skylake: Enable TraceHub depending on devicetree configurationFelix Singer
Currently TraceHub gets enabled by the option EnableTraceHub, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the TraceHub controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableTraceHub setting. Change-Id: Idcd1e5035bc66c48620e4033d8b4988428e63db9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43847 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable SMBus depending on devicetree configurationFelix Singer
Currently SMBus gets enabled by the option SmbusEnable, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the SMBus controller. I checked all corresponding mainboards if the devicetree configuration matches the SmbusEnable setting. Change-Id: I0d9ec1888c82cc6d5ef86d0694269c885ba62c41 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-29soc/intel/skylake: Enable LAN depending on devicetree configurationFelix Singer
Currently LAN gets enabled by the option EnableLan, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the LAN controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableLan setting. Change-Id: I36347e8e0f0ddba47aec52aeb6bc047e3c8bfaa4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-29soc/intel/skylake: Enable SATA depending on devicetree configurationFelix Singer
Currently SATA gets enabled by the option EnableSata, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the SATA controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableSata setting. Change-Id: I217dcb7178f29bbdeada54bdb774166126b47a5a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-26mb/purism/librem_skl: Disable CLKREQ for NVMeMatt DeVillier
This effectively reverts commit 5086ccef (mb/purism/librem_skl: Fix CLKREQ for 15v3 NVMe). Some Librem 15v3/v4 boards are showing issues with NVMe detection or booting via SeaBIOS, so revert this until a proper fix can be found. Test: build / successfully boot Librem 15v4 with problematic NVMe drive. Change-Id: I0659f77bbe693f3d3b192a28ff3ef013658930cc Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43490 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26skylake boards: Factor out copy-pasted PIRQ routesAngel Pons
Put them in common code just in case something depends on the values. Change-Id: Ief526efcbd5ba5546572da1bc6bb6d86729f4e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43851 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30ACPI: Drop typedef global_nvs_tKyösti Mälkki
Bring all GNVS related initialisation function to global scope to force identical signatures. Followup work is likely to remove some as duplicates. Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-06-07soc/intel/baytrail,braswell,broadwell,quark: Select COMMON_FADTKyösti Mälkki
Some of the boards do not select SYSTEM_TYPE_LAPTOP or _CONVERTIBLE so their FADT preffered_pm_profile would change from PM_MOBILE without the added overrides here. Change-Id: I04b602b2c23fbd163fcd110a44ad25c6be07ab66 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41920 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-07mb,soc/intel: Rename acpi_fill_in_fadt() to acpi_fill_fadt()Kyösti Mälkki
Change-Id: I9025ca3b6b438e5f9a790076fc84460342362fc2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41919 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02mb/purism/librem*: drop EC chip deviceMatt DeVillier
CB:35086 exposed that the devicetree listed an EC chip for which there is no actual driver; the EC is entirely ACPI code (.asl) included by the board's ec.asl. Remove the unnecessary EC chip driver from both boards, as well as the unnecessary Kconfig selection for librem_bdw. Test: build/boot Librem 13v1, 13v4, verify battery info etc still correct. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I5cb0b51881ab8f14e9ec693485f673f4284b5f14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20mb/purism/librem_skl: select GFX_GMA_IGNORE_PRESENCE_STRAPSMatt DeVillier
Some Librem 13v4's don't have the presence straps connected, leading libgfxinit to fail to init the internal display. Select GFX_GMA_IGNORE_PRESENCE_STRAPS since all SKL/KBL Librems have an internal display so there's no adverse effect. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Ib9d281b7d495c4f9a5c6fc5fdb8042b0fcbda745 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41417 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18skylake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Skylake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on nami system Change-Id: Idc82f3d2f805b92fb3005d2f49098e55cb142e45 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 01:37:06 +0000