Age | Commit message (Expand) | Author |
2019-09-25 | mb/siemens/mc_apl{2,4,5}: Enable VBOOT | Werner Zeh |
2019-09-05 | mb/siemens/mc_apl5: Disable IGD if no EDID data available | Mario Scheithauer |
2019-07-18 | mb/siemens/{mc_apl1,...,mc_apl5}: Fix GPIO settings | Mario Scheithauer |
2019-07-18 | mb/siemens/mc_apl1: Disable all UHS-I SD-Card speed modes | Mario Scheithauer |
2019-07-12 | mb/siemens/mc_apl3: Enable LPSS UART 1 | Mario Scheithauer |
2019-07-11 | mb/siemens/{baseboard,mc_apl3,mc_apl4,mc_apl5}: Fix GPIO_168 | Mario Scheithauer |
2019-07-11 | mb/siemens/{mc_apl1,...,mc_apl5}: Reduce eMMC bus speed mode | Mario Scheithauer |
2019-06-21 | siemens/mc_apl5: Change PTN interface settings | Mario Scheithauer |
2019-06-21 | siemens/mc_apl5: Enable TPM support | Mario Scheithauer |
2019-06-06 | siemens/mc_apl5: Add own GPIO table | Mario Scheithauer |
2019-05-29 | src/mainboard: Add missing 'include <types.h>' | Elyes HAOUAS |
2019-05-06 | mb/siemens/mc_apl2: Limit SD-Card speed to DDR50 | Werner Zeh |
2019-04-15 | mb/siemens/mc_apl4: Remove usage of external RTC | Werner Zeh |
2019-04-15 | mb/siemens/mc_apl1: Enable HDA in devicetree for all mainboard variants | Werner Zeh |
2019-04-08 | siemens/mc_apl5: Remove reduced clock rate for I2C0 | Mario Scheithauer |
2019-04-04 | siemens/mc_apl4: Provide CLK on APL Pin PMU_SUSCLK | Uwe Poeche |
2019-03-15 | mb/mc_apl1/variants/mc_apl5: Drop unused '#include <lib.h>' | Elyes HAOUAS |
2019-03-06 | mb/siemens/{mc_apl1,mc_tcu3}: Fix typo on "Display" | Elyes HAOUAS |
2019-03-04 | arch/io.h: Add missing includes | Kyösti Mälkki |
2019-02-13 | siemens/mc_apl4: Enable HW SPI TPM on mainboard mc_apl4 | Uwe Poeche |
2019-02-13 | siemens/mc_apl2: Remove double entry from devicetree | Mario Scheithauer |
2019-02-05 | mb/siemens/mc_apl1: Enable VTD for mc_apl2 and mc_apl5 | Werner Zeh |
2019-01-30 | siemens/mc_apl2: Change SERIRQ mode | Mario Scheithauer |
2019-01-30 | siemens/mc_apl2: Correct whitespace of devicetree | Mario Scheithauer |
2019-01-30 | siemens/mc_apl2: Activate TPM support | Mario Scheithauer |
2019-01-16 | siemens/mc_apl4: Change UART_FOR_CONSOLE index | Mario Scheithauer |
2018-12-17 | siemens/mc_apl4: Enable RTC RX6110SA on this mainboard | Uwe Poeche |
2018-12-17 | siemens/mc_apl4: Enable LVDS Display on mc_apl4 | Uwe Poeche |
2018-12-17 | siemens/mc_apl4: Add GPIO configuration | Uwe Poeche |
2018-11-29 | siemens/mc_apl5: Disable PCI clock outputs on XIO bridges | Mario Scheithauer |
2018-11-29 | siemens/mc_apl5: Set bus master bit for on-board PCI device | Mario Scheithauer |
2018-11-29 | siemens/mc_apl5: Enable SDCARD | Mario Scheithauer |
2018-11-27 | siemens/mc_apl5: Adjust the settings for the PCIe root ports | Mario Scheithauer |
2018-11-26 | siemens/mc_apl1/variants/mc_apl*: Remove unneeded PTN read | Mario Scheithauer |
2018-11-23 | siemens/mc_apl4: Set CPU clock to minimum ratio | Werner Zeh |
2018-11-18 | siemens/mc_apl5: Add new mainboard variant mc_apl5 | Mario Scheithauer |
2018-11-16 | mb/siemens/mc_apl1/variants/mc_apl*: Remove unused BOARD_SIEMENS_MC_APL*_VAR | Elyes HAOUAS |
2018-11-16 | src: Remove unneeded include <lib.h> | Elyes HAOUAS |
2018-11-16 | mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetree | Peter Lemenkov |
2018-11-16 | siemens/mc_apl4: Clean up ramstage | Mario Scheithauer |
2018-11-16 | siemens/mc_apl4: Overwrite swizzle data for LPDDR4 | Mario Scheithauer |
2018-11-12 | siemens/mc_apl4: Enable SDCARD | Mario Scheithauer |
2018-11-12 | siemens/mc_apl4: Remove external RTC from I2C0 | Mario Scheithauer |
2018-11-12 | siemens/mc_apl4: Enable all PCIe root ports | Mario Scheithauer |
2018-11-12 | siemens/mc_apl4: Remove reduced clock rate for I2C0 | Mario Scheithauer |
2018-11-12 | siemens/mc_apl4: Disable CLKREQ of PCIe root ports | Mario Scheithauer |
2018-11-12 | siemens/mc_apl3: Disable PCI clock outputs on XIO bridges | Mario Scheithauer |
2018-11-12 | siemens/mc_apl3: Set Full Reset Bit into Reset Control Register | Mario Scheithauer |
2018-11-12 | siemens/mc_apl3: Set bus master bit for on-board PCI device | Mario Scheithauer |
2018-11-12 | siemens/mc_apl3: Remove the correction of the Tx signal for SATA | Mario Scheithauer |