| Age | Commit message (Expand) | Author |
|---|
| 2018-10-06 | soc/intel/common, mb/google, mb/siemens: Use lower case x for RXD | Furquan Shaikh |
| 2018-10-04 | mc_apl1: Set up SPI OPCODE menu before locking | Werner Zeh |
| 2018-10-01 | siemens/mc_apl1: Activate clock spreading for PTN3460 | Mario Scheithauer |
| 2018-09-27 | siemens/mc_apl1: Add new mainboard variant mc_apl2 | Mario Scheithauer |
| 2018-09-27 | siemens/mc_apl1: Make the DDR memory swizzle data configurable | Mario Scheithauer |
| 2018-08-31 | siemens/mc_apl1: Correct the Tx signal from SATA interface | Mario Scheithauer |
| 2018-08-28 | siemens/mc_apl1: Extend circuit life by clock gating and power gating | Mario Scheithauer |
| 2018-08-27 | siemens/mc_apl1: Disable PCI clock outputs on XIO bridge | Mario Scheithauer |
| 2018-08-24 | siemens/mc_apl1: Select DDR50 mode for eMMC | Mario Scheithauer |
| 2018-08-23 | siemens/mc_apl1: Make adjustments for the 1st redesign of this mainboard | Mario Scheithauer |
| 2018-08-23 | siemens/mc_apl1: Move board specific things to mc_apl1 variant | Mario Scheithauer |
| 2018-06-06 | soc/intel/common/block: Add common chip config block | Subrata Banik |
| 2018-05-08 | mb/siemens: Get rid of device_t | Elyes HAOUAS |
| 2018-04-27 | siemens/mc_apl1: Move board specific things to mc_apl1 variant | Mario Scheithauer |
| 2018-04-26 | siemens/mc_apl1: Provide baseboard and variant concepts | Mario Scheithauer |
| 2018-04-24 | compiler.h: add __weak macro | Aaron Durbin |
| 2018-04-13 | siemens/mc_apl1: Fix accuracy issue with IDT PMIC | Mario Scheithauer |
| 2018-04-11 | siemens/mc_apl1: Make DRAM configuration more flexible | Mario Scheithauer |
| 2018-03-16 | soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin array | Furquan Shaikh |
| 2017-11-07 | siemens/mc_apl1: Select CONFIG_NC_FPGA_NOTIFY_CB_READY | Mario Scheithauer |
| 2017-11-03 | siemens/mc_apl1: Enable I2C0 with 100kHz | Mario Scheithauer |
| 2017-11-03 | siemens/mc_apl1: Set coreboot ready LED | Mario Scheithauer |
| 2017-11-03 | siemens/mc_apl1: Add legacy IRQ routing for PCI devices | Mario Scheithauer |
| 2017-09-26 | Use stopwatch_wait_until_expired where applicable | Jonathan Neuschäfer |
| 2017-09-21 | siemens/mc_apl1: Move SCI to IRQ 10 | Mario Scheithauer |
| 2017-09-14 | siemens/mc_apl1: Add delay to wait for legacy devices | Werner Zeh |
| 2017-09-08 | siemens/mc_apl1: Disable internal UARTs | Mario Scheithauer |
| 2017-09-08 | siemens/mc_apl1: Set bus master bit for on-board PCI device | Mario Scheithauer |
| 2017-08-18 | include/device: Split i2c.h into three | Nico Huber |
| 2017-08-15 | soc/intel/common/block: Add LPC Common code and use it for APL | Ravi Sarawadi |
| 2017-07-27 | siemens/mc_apl1: Select skip RAPL configuration | Mario Scheithauer |
| 2017-07-20 | siemens/mc_apl1: Activate ECC for DRAM | Mario Scheithauer |
| 2017-07-20 | siemens/mc_apl1: Include platform.asl | Mario Scheithauer |
| 2017-07-18 | siemens/mc_apl1: Disable SDCARD | Mario Scheithauer |
| 2017-07-13 | Rename __attribute__((packed)) --> __packed | Stefan Reinauer |
| 2017-06-30 | mb/siemens/mc_apl1: Set up RTC backup mode to primary cell | Werner Zeh |
| 2017-06-23 | siemens/mc_apl1: Enable decoding for COM 3 on LPC | Mario Scheithauer |
| 2017-06-23 | siemens/mc_apl1: Disable XDCI | Mario Scheithauer |
| 2017-06-13 | siemens/mc_apl1: Enable decoding for COM 3 on LPC | Mario Scheithauer |
| 2017-06-13 | siemens/mc_apl1: Use Siemens NC FPGA driver | Mario Scheithauer |
| 2017-05-17 | siemens/mc_apl1: Program eMMC DLL settings | Mario Scheithauer |
| 2017-05-17 | siemens/mc_apl1: Select external 8250 UART | Mario Scheithauer |
| 2017-05-11 | siemens/mc_apl1: Add usage of external RTC RX6110 SA | Mario Scheithauer |
| 2017-05-11 | siemens/mc_apl1: Correct GPIO settings | Mario Scheithauer |
| 2017-05-05 | mainboard/siemens/mc_apl1: remove unnecessary header | Aaron Durbin |
| 2017-04-04 | siemens/mc_apl1: Activate PTN3460 eDP to LVDS bridge IC | Mario Scheithauer |
| 2017-03-29 | siemens/mc_apl1: Adjust gpio settings | Mario Scheithauer |
| 2017-03-15 | siemens/mc_apl1: Clean up the code | Mario Scheithauer |
| 2017-02-20 | siemens/mc_apl1: Set MAC address for all available i210 MACs | Mario Scheithauer |
| 2017-02-15 | siemens/mc_apl1: Make basic settings for booting the mainboard | Mario Scheithauer |
