summaryrefslogtreecommitdiff
path: root/src/mainboard/thomson
AgeCommit message (Expand)Author
2010-03-29__PRE_RAM__ is now correctly specified in the Makefile. No need to hack it intoStefan Reinauer
2010-03-22printk_foo -> printk(BIOS_FOO, ...)Stefan Reinauer
2010-03-17This is kind of a pre CAR patch to properly allocate "shared" graphics memoryJoseph Smith
2010-03-17more warning fixes.Stefan Reinauer
2010-03-13Fix llshellStefan Reinauer
2010-03-01This patch implements MBI (modular bios interface) support to the i830 chipset.Stefan Reinauer
2010-02-27- make HAVE_HARD_RESET match what newconfig didPatrick Georgi
2010-02-27This does the following:Stefan Reinauer
2010-02-12This patch allows a Kconfig option to choose between 64MB (IP1000) and 128MB ...Joseph Smith
2010-02-09Move all the copies of the romstage.inc rule toPatrick Georgi
2010-02-08janitor task: unify and cleanup naming.Stefan Reinauer
2010-02-07newconfig is no more.Patrick Georgi
2010-02-01Alot of it is trivial clean ups and 830 is now able to initialize one row/sid...Joseph Smith
2010-01-30Trivial fixup on IP1000 and RM4100 copyright entries.Joseph Smith
2010-01-29RCA RM4100 and Thomson IP1000 auto.c rework.Joseph Smith
2010-01-05* Explicitly add __PRE_RAM__ where it should be added.Stefan Reinauer
2009-11-06Remove drivers/pci/onboard. The only purpose was for option ROMs, which areMyles Watson
2009-11-06Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb.Uwe Hermann
2009-10-26Add kconfig menus for most chipset VIDEO_MB values.Uwe Hermann
2009-10-24Major cleanups of the hard_reset() code and config in coreboot.- supermicro/x6dhe_g/auto.c
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann
2009-10-17Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/Peter Stuge
2009-10-16Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop"Peter Stuge
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
2009-10-08More kconfig:Patrick Georgi
2009-10-07Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boardsUwe Hermann
2009-10-04This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi
2009-10-03Remove:Patrick Georgi
2009-09-23simplify source tree hierarchy: move files from sdram/ and ram/ to lib/Stefan Reinauer
2009-08-12Kconfig!Patrick Georgi
2009-08-11Enable CBFS everywhere. All boards compiled for me (abuild tested),Patrick Georgi
2009-06-30the tool chain settings should not be in renamed (as they will never live inStefan Reinauer
2009-06-30This patch unifies the use of config options in v2 to all start with CONFIG_Stefan Reinauer
2009-06-19Undo my ugly commit that added uses clauses in lots of places instead of one.Myles Watson
2009-06-17Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial.Myles Watson
2009-06-06When I started refactoring mainboard Config.lb, I added two differentCarl-Daniel Hailfinger
2009-05-29rename the option CONFIG_PCI_OPTION_ROM_RUN_VM86 to CONFIG_PCI_OPTION_ROM_RUN...Joseph Smith
2009-05-29enable/disable IDE 0/1 (Primary/Secondary) interfaces on the i82801xx southbr...Joseph Smith
2009-05-08Trivial fixup IRQS on IP1000 and RM4100.Joseph Smith
2009-05-08Set up PIRQs in mainboard Config.lb for IP1000 and RM4100 instead of using th...Joseph Smith
2009-05-08Disable the AC97 modem via the ICH4 LPC disable function register early in th...Joseph Smith
2009-05-07Trivial checksum fixup for irq tables on IP1000 and RM4100.Joseph Smith
2009-05-02Run dos2unix on all files:Stefan Reinauer
2009-05-02Trivial fix up to the GPIO's connected to the IP1000 and RM4100, only set one...Joseph Smith
2009-05-01This patch changes the default rom emulator to VM86. Joseph Smith
2009-05-01Trivial cosmetic fixes to IP1000 and RM4100 irq_tables.c Signed-off-by: Josep...Joseph Smith
2009-04-21Thanks to Myles' patch adding support for include statements,Carl-Daniel Hailfinger
2009-04-14v2/src romfs->cbfs renamePeter Stuge
2009-04-13I need to do uses HAVE_ACPI_RESUME for each board. Here we go.Rudolf Marek