summaryrefslogtreecommitdiff
path: root/src/mainboard/tyan
AgeCommit message (Collapse)Author
2012-03-08Unify Local APIC address definitionsPatrick Georgi
We used several names for that same value, and hardcoded the value at some more places. They're all LOCAL_APIC_ADDR now (except for lapic specific code that still uses LAPIC_DEFAULT_BASE). Change-Id: I1d4be73b1984f22b7e84681edfadf0588a7589b6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/676 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-22Remove old AMD fam10 fixme commentMarc Jones
The family10 code had a very slow decompress before the cache settings were fixed. This has been fixed for some time. Remove all the old messages from the serial stream. Change-Id: I476efe1a430f702af394734f354ff69bd053f1d2 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/672 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-17nvidia/mcp55: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: Ibfb7b294aa5007ac2f767d85e090572f85148bad Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/659 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17intel/i82801ex: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I83105e92d1cc5d2d12aede564a1ab9c5d912ac56 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/664 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17nvidia/ck804: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree ck804-using board has it not selected, so move selection from boards to southbridge. Change-Id: I3064b406cfd5ad18067c597bd5b5866a720f7e87 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/657 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17amd/amd8111: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree amd8111-using board has it not selected, so move selection from boards to southbridge. Change-Id: Iabbaa4cd2fd367ed6decec7ef5cdcbae3b264d52 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/654 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-02-09Remove no-op Makefiles under mainboard directoryKyösti Mälkki
Patch removes following files: src/mainboard/amd/serengeti_cheetah/Makefile.inc src/mainboard/amd/serengeti_cheetah_fam10/Makefile.inc src/mainboard/broadcom/blast/Makefile.inc src/mainboard/hp/dl145_g1/Makefile.inc src/mainboard/msi/ms9282/Makefile.inc src/mainboard/supermicro/h8dme/Makefile.inc src/mainboard/tyan/s2881/Makefile.inc src/mainboard/tyan/s2892/Makefile.inc src/mainboard/via/epia-m700/Makefile.inc Change-Id: I020776313abff1772be38afc896af51ca5ab6453 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/612 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-07Delete hard-coded driver includesKyösti Mälkki
Driver components are conditionally included in the build using the Kconfig options. Change-Id: I05417ee263a5b82e947600482dfb68f7a3f52d58 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/610 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-30remove usbdebug.h include from mainboard/romstage codeSven Schnelle
No romstage is supposed to use usbdebug functions/defines directly, so remove all those includes. The usb code is now called and setup from console code. Change-Id: I9b1120d96f5993303d6b302accc86e14a91f7a9f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/354 Tested-by: build bot (Jenkins)
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
This change removes CONFIG_TINY_BOOTBLOCK, CONFIG_BIG_BOOTBLOCK, and all their uses, assuming TINY_BOOTBLOCK=y, BIG_BOOTBLOCK=n. This might break a couple of boards on runtime, but so far, fixes were quite simple. There's a flag day: Code that relies on CONFIG_TINY_BOOTBLOCK must be adapted. Change-Id: I1e17a4a1b9c9adb8b43ca4db8aed5a6d44d645f5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/320 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-13Use default table creator macro for all SSDTsStefan Reinauer
Change-Id: I0c138ebfdc6d4d5ae7d3512b0dd68df20485690e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/262 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Refactor mptable generation some morePatrick Georgi
The last couple of lines of every mptable function were mostly identical. Refactor into common code, a new function mptable_finalize. Coccinelle script: @@ identifier mc; @@ ( -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); | -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); ) Change-Id: Ib2270d800bdd486c5eb49b328544d36bd2298c9e Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/246 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Get rid of fixup_virtual_wirePatrick Georgi
As stated in some code files, fixup_virtual_wire was established to avoid touching 200 invocations of the mptable code. Let Coccinelle do it: @@ type T; identifier v; @@ -void fixup_virtual_wire(T v) -{ ... } @@ expression A; identifier v; @@ -v = smp_write_floating_table(A); +v = smp_write_floating_table(A, 0); @@ expression A; identifier v; @@ -v = smp_write_floating_table(A, 0); -fixup_virtual_wire(v); +v = smp_write_floating_table(A, 1); Change-Id: Icad8a063380bf4726be7cebb414d13b574112b14 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/245 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Refactor lintsrc generationPatrick Georgi
We copied pretty much the same code for generating mptable entries for local interrupts (with some notable exceptions). This change moves these lines into a generic function "mptable_lintsrc" and makes use of it in many places. The remaining uses of smp_write_lintsrc should be reviewed and replaced by mptable_lintsrc calls where possible, and smp_write_lintsrc made static. This patch was generated using Coccinelle: @@ expression mc; expression isa_bus; @@ -smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x0); -smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, isa_bus); @@ expression mc; expression isa_bus; @@ -smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x0); -smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, isa_bus); @m@ identifier mc; expression BUS; @@ -#define IO_LOCAL_INT(type, intr, apicid, pin) smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, BUS, (intr), (apicid), (pin)); ... -IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); -IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, BUS); Change-Id: I97421f820cd039f5fd753cb0da5c1cca68819bb4 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/244 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-03TINY_BOOTBLOCK problem-fix on amdk8+amd8111 platformsenok71
The hp/dl145_g1 motherboard did not work since commit 1f7d3c5672ec90f8d71907b1a07c8a87fa461047 (svn 6124). That commit added TINY_BOOTBLOCK for amd8111 southbridge. The result was that the boot process stopped very early (no console output whatsoever). The same symptom was reported on other AMDK8 based boards with amd8111 southbridge chips. This commit seems to fix the bug. It adds a bootblock.c under src/northbridge/amd/amdk8 that calls enumerate_ht_chains. Probably the problem was that enum_ht_chains needs to be called before the southbridge bootblock.c function, not after. Change-Id: I74fb892aa39048e2d0e76c081b713f825d67f2d4 Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Reviewed-on: http://review.coreboot.org/235 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-04-20run uart_init() from console_init, just like the other console ↵Stefan Reinauer
initialization functions. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-18* Set USBDEBUG_DEFAULT_PORT in all southbridges and use that valueStefan Reinauer
to unify calls to *_enable_usbdebug() * rename *_enable_usbdebug() to enable_usbdebug() * move enable_usbdebug() to generic romstage console init code and drop it from the individual romstage.c files. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6513 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-15fix mainboards that were including earlymtrr.c without actually using it.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6502 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-10In 2007 Adrian Reber suggested that we drop ASSEMBLY in favor of __ASSEMBLER__.Stefan Reinauer
http://www.coreboot.org/pipermail/coreboot/2007-September/024665.html It's about time we follow this advice. Also move some manually set __PRE_RAM__ defines (ap_romstage.c) to the Makefile and drop unused CPP define Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6482 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-08Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the ↵Scott Duplichan
expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF. The patch makes these changes: 1) Remove the BUID swap list from ht_wrapper.c and put it in each of 15 romstage.c files where it is used (AMD family 10h projects). 2) Add a prototype to amdfam10.h. 3) Modify the swap list and test in real hardware for mahogany_fam10 and kino family 10h and confirm HT3 operation for the SB link. Abuild tested. Signed-off-by: Scott Duplichan <sc...@notabs.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6439 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
all boards to the new config scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6421 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26Make AMD Fam10h CPU microcode updates optional in Expert modeXavi Drudis Ferran
Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6385 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24Tyan/s2735 doesn't need to define its own hard_reset function anymore.Patrick Georgi
The southbridge already provides hard_reset. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6378 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-17drop one more version of doing serial uart output differently.Stefan Reinauer
coreboot made it kind of complicated to print a character on serial. Not quite as complicated as UEFI, but too much for a good design. Fix it. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6191 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-16Get mptable OEM/product ID from kconfig variables.Uwe Hermann
We currently use "COREBOOT" unconditionally as the "OEM ID" in our mptable.c files, and hardcode the mainboard name in mptable.c like this: mptable_init(mc, "DK8-HTX ", LAPIC_ADDR); However, the spec says "OEM ID: A string that identifies the manufacturer of the system hardware." (Table 4-2, page 42) so "COREBOOT" doesn't match the spec, we should use the hardware vendor name. Thus, use CONFIG_MAINBOARD_VENDOR which we have already as the "OEM ID" (truncate/fill it to 8 characters as per spec). Also, use CONFIG_MAINBOARD_PART_NUMBER (the board name) as "product ID", and truncate/fill it to 12 characters as per spec, if needed. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6183 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-15Cleanup up HD audio codec / hda_verb.h files.Uwe Hermann
Most of the current hda_verb.h files are identical (same MD5 sum) and are intended for a specific MCP55 board with the Realtek ALC880 audio codec, which has the vendor/device ID of 0x10ec0880. They were splitted out from the MCP55 southbridge code and put into board dirs a long time ago (which is correct, as those settings are indeed board-specific), but they were never adapted to those boards. Here's the table of which codec is soldered onto which board, based on checking the vendor website board spec pages, and the board manuals: - GIGABYTE GA-M57SLI-S4: Realtek ALC883 - MSI MS-7260: Realtek ALC883 - MSI MS-9652: Realtek ALC888 - MSI MS-9282: Server board, doesn't have audio at all - Tyan S2912: Server board, doesn't have audio at all - All Supermicro boards: Server boards, don't have audio at all - NVIDIA l1_2pvv: No public info to be found, but I assume this was the original MCP55 eval board for the port and it's probably has the Realtek ALC880 codec used in the original hda_verb.h. These are the codec vendor device/IDs involved: Realtek ALC880: 0x10ec0880 Realtek ALC883: 0x10ec0883 Realtek ALC888: 0x10ec0888 The following files are marked as incorrect / TODO, as the ID of the codec doesn't match and thus will never get actually used (you'll see "HDA: no verb!" or similar in the coreboot logs). Even if the ID matched, the rest of the table would be incorrect anyway because the values are highly board-specific. ./src/mainboard/gigabyte/m57sli/hda_verb.h ./src/mainboard/msi/ms9652_fam10/hda_verb.h ./src/mainboard/msi/ms9282/hda_verb.h The following files can be safely dropped as these are server boards and don't have HD audio (or other audio) at all: ./src/mainboard/supermicro/h8dmr/hda_verb.h ./src/mainboard/supermicro/h8qme_fam10/hda_verb.h ./src/mainboard/supermicro/h8dme/hda_verb.h ./src/mainboard/supermicro/h8dmr_fam10/hda_verb.h ./src/mainboard/tyan/s2912/hda_verb.h ./src/mainboard/tyan/s2912_fam10/hda_verb.h The following two are correct and can stay: ./src/mainboard/nvidia/l1_2pvv/hda_verb.h ./src/mainboard/getac/p470/hda_verb.h Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6180 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08Move "select CACHE_AS_RAM" lines from boards into CPU socket.Uwe Hermann
All K8/Fam10h boards use CAR, so move the "select CACHE_AS_RAM" into the socket directories, and remove it from the individual boards. Do the same for Intel CPUs/sockets where all boards use CAR. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6151 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08second round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6150 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-07Get rid of some unneeded function prototypes in romstage.c files.Uwe Hermann
Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-26AMD-8111: Add TINY_BOOTBLOCK support.Uwe Hermann
Also, add missing license header to amd8111_enable_rom.c, add some more code comments and use PCI IDs from pci_ids.h instead of hardcoding. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6124 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-25MCP55: Add TINY_BOOTBLOCK support.Uwe Hermann
Also, move CONFIG_HT_CHAIN_END_UNITID_BASE #ifdef block to mcp55.h to make the build work (but this is a good idea anyway, as it's used in multiple files). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6123 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Simplify a few code chunks, fix whitespace and indentation.Uwe Hermann
Also, remove some less useful comments, some dead code / unused functions. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6108 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Drop excessive whitespace randomly sprinkled in romstage.c files.Uwe Hermann
Also drop some dead or useless code snippets. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6107 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Convert more boards to use mptable_write_buses.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6106 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Move MCP55_PCI_E_X_* to Kconfig. Any useless values in romstage.cs werePatrick Georgi
not brought over to Kconfig (this applies to all #defines to 4, as that's the default anyway) Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6104 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Use DIMM0 et al in lots more places instead of hardocding values.Uwe Hermann
The (0xa << 3) expression equals 0x50, i.e. DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6103 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Build fix.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6102 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Merge all spd_addr.h into the resp. romstage.c files.Uwe Hermann
Except for one instance the spd_addr.h were now very tiny, there's not much point in keeping that stuff in an extra file. The only user of those files is the romstage.c file anyway. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6101 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Some more DIMM0 related cleanups and deduplication.Uwe Hermann
- VIA VT8235: Do the shift in smbus_read_byte() as all other chipsets do. - spd.h: Move RC00-RC63 #defines here, they were duplicated in lots of romstage.c files and lots of spd_addr.h files. Don't even bother for those spd_addr.h which aren't even actually used, drop them right away. - Replace various 0x50 hardcoded numbers with DIMM0, 0x51 with DIMM1, and 0xa0 with (DIMM0 << 1) where appropriate. - Various debug.c files: Replace SMBUS_MEM_DEVICE_START with DIMM0, SMBUS_MEM_DEVICE_END with DIMM7, and drop useless SMBUS_MEM_DEVICE_INC. - VIA VX800: Drop unused SMBUS_ADDR_CH* #defines. - VIA VT8623: Do the shift in smbus_read_byte() as all other chipsets do. Then, replace 0xa0 (which now becomes 0x50) with DIMM0. - alix1c/romstage.c, alix2d/romstage.c: Adapt to recent bit shift changes. - Various files: Drop DIMM_SPD_BASE and/or replace it with DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6100 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
addressing scheme to match the rest of the tree (0x50 instead of 0xa0). abuild tested. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-18Eliminate SET_NB_CFG_54 option. There was no board thatPatrick Georgi
deselected it, and very likely there won't ever be any hardware that requires it deselected. Keep the "selected" code path around, leading to no functional change. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6086 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-16Move the SET_FIDVID* family of configuration options to Kconfig andPatrick Georgi
make their defaults more obvious. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6077 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-14CK804/MCP55 devicetree.cb cosmetic and indentation fixes.Uwe Hermann
Add a few more comments for the entries, and also change the devicetree.cb files to the more compact and better readable variant with indentation level of 2 spaces (instead of random mix of tabs and spaces). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6071 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07Move K8_ALLOCATE_IO_RANGE to Kconfig.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6036 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-07FIRST_CPU, SECOND_CPU, TOTAL_CPUS are only used in onePatrick Georgi
other place, and that defines these symbols itself (and identical, too). Drop them. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6034 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-06Remove comments that are obsolete since r6028.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6029 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05Move QRANK_DIMM_SUPPORT to Kconfig, removing it from romstage.cPatrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6028 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-27Convert ck804_early_smbus.c to a separately compiled unit.Jonathan Kollasch
Additionally, make the second SMBus more accessible in romstage. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5994 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-26We need to call smp_write_lintsrc() instead of smp_write_intsrc() forTobias Diedrich
local ints. This is wrong in most coreboot mptables, probably all generated by util/mptable/mptable.c. After fixing this now XP can boot in MPS mode on my M2V. Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5992 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-14 17:30:53 +0000