coreboot - Some coreboot project code with my work

Age	Commit message (Expand)	Author
2015-06-08	Remove empty lines at end of file	Elyes HAOUAS
2015-05-21	Remove address from GPLv2 headers	Patrick Georgi
2015-04-18	kconfig: automatically include mainboards	Stefan Reinauer
2015-02-16	mainboard/cmos: Kill off unused boot_* parameters	Timothy Pearson
2015-02-16	mainboard/cmos: Move ECC variables out of fallback mechanism byte	Timothy Pearson
2015-02-16	mainboard/cmos: Delete obsolete commented parameters	Timothy Pearson
2015-01-06	mainboard: Drop print_ implementation from non-romcc boards	Stefan Reinauer
2015-01-06	mainboard/*/romstage.c: Sanitize system header inclusions	Edward O'Callaghan
2014-12-02	Replace hlt with halt()	Patrick Georgi
2014-08-15	intel/cpu: rename car.h to romstage.h	Aaron Durbin
2014-08-14	Intel: Add common header file for CAR setup	Edward O'Callaghan
2014-07-18	mainboard: Trivial - drop trailing blank lines at EOF	Edward O'Callaghan
2014-07-08	mainboard: Trivial - drop trailing blank lines at EOF	Edward O'Callaghan
2014-05-03	Move ARCH_* from board/Kconfig to cpu or soc Kconfig.	Furquan Shaikh
2014-01-19	board-status: Add board_info.txt extracted from wiki.	Vladimir Serbinenko
2013-03-01	GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«	Paul Menzel
2013-02-25	mainboard.c: Name enable_dev function uniformly `mainboard_enable`	Paul Menzel
2013-02-14	sconfig: rename lapic_cluster -> cpu_cluster	Stefan Reinauer
2013-02-14	sconfig: rename pci_domain -> domain	Stefan Reinauer
2012-11-16	Fix PIRQ routing abstraction	Stefan Reinauer
2012-11-06	Drop redundant CHIP_NAME in mainboard.c	Kyösti Mälkki
2012-07-26	Drop mainboard chip.h	Stefan Reinauer
2012-02-17	Remove whitespace.	Patrick Georgi
2012-02-13	AMD Geode cpus: apply un-written naming rules	Kyösti Mälkki
2012-01-07	Update geode GX2 tree to match LX.	Nils Jacobs
2011-11-01	remove trailing whitespace	Stefan Reinauer
2011-04-20	run uart_init() from console_init, just like the other console initialization...	Stefan Reinauer
2011-04-11	Unify use of post_code	Alexandru Gagniuc
2011-03-01	Use subsystem id from devicetree.cb instead of Kconfig and move	Sven Schnelle
2010-12-29	-Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)	Nils Jacobs
2010-12-08	first round name simplification. drop the <component>_ prefix.	stepan
2010-11-22	Drop per-board ram_check() calls for now.	Uwe Hermann
2010-11-21	Simplify a few code chunks, fix whitespace and indentation.	Uwe Hermann
2010-11-21	Drop excessive whitespace randomly sprinkled in romstage.c files.	Uwe Hermann
2010-11-21	Use DIMM0 et al in lots more places instead of hardocding values.	Uwe Hermann
2010-11-20	Unify DIMM SPD addressing. For Geode, change the	Patrick Georgi
2010-11-05	Add Kconfig CPU speed selection to Geode GX2 boards.	Nils Jacobs
2010-11-05	GX2: Define the unused DIMM1 to 0xFF to make it obvious it is a bogus value.	Nils Jacobs
2010-11-01	Change Geode GX2 to use the auto DRAM detect code from Geode LX.	Nils Jacobs
2010-10-13	Enable or disable the power button in Kconfig	Peter Stuge
2010-10-05	Remove lib/ramtest.c-include from all CAR boards.	Patrick Georgi
2010-09-27	Move CAR config from mainboard to CPU config for AMD GX2 boards.	Warren Turkal
2010-09-27	RAMBASE = 0x4000 is no longer needed. Drop it.	Stefan Reinauer
2010-08-30	We call this cache as ram everywhere, so let's call it the same in Kconfig	Stefan Reinauer
2010-08-30	Restructured all vendors' Kconfig files to no longer source the boards'	Jens Rottmann
2010-08-26	Remove unused mainboard_config definitions. Trivial.	Myles Watson
2010-08-03	Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /	Stefan Reinauer
2010-07-28	Let Geode GX2 use geode_post_code.h just like Geode LX	Nils Jacobs
2010-07-26	This patch converts the Geode GX2 boards to CAR.	Nils Jacobs
2010-07-06	Re-integrate "USE_OPTION_TABLE" code.	Edwin Beasant