summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2012-08-01AMD and GFXUMA : drop redundant use of lb_add_memory_range()Kyösti Mälkki
See commit 505414a6cfb2aeef455b5144e4b96fc27f19eb39. Change-Id: Icc04af9726ae54141581aecc84c40e8aac54591d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1378 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-01Intel and GFXUMA: drop redundant use of lb_add_memory_range()Kyösti Mälkki
Use of uma_resource() in northbridge code created a memory resource marked as reserved. Such resources are removed from system memory in write_coreboot_table(). Change-Id: I14bfd560140d8d30ec156562f23072bfae747bde Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1238 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-31Revert "remove CONFIG_SERIAL_CPU_INIT"Sven Schnelle
This reverts commit 78efc4c36c68b51b3e73acdb721a12ec23ed0369. The broadcast patch was reverted, so this commit should also be reverted. The reason for reverting the broadcast patch: It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I05c27dec55fa681f455215be56dcbc5f22808193 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1380 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26amd/lx: Move configuration from source to KconfigPatrick Georgi
LX has two values that are usually automatically derived but can be overridden, that were so far defined in each board's romstage. These values, along with the toggle to enable override are now part of LX's Kconfig. For boards that gave values but requested autogeneration, the values are removed. Further improvements: Figure out the various fields in PLLMSRlo and make them sensible Kconfig options (instead of the hex value it is now) Change-Id: I8a17c89e4a3cb1b52aaceef645955ab7817b482d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1227 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-26Add correct bios callout into read event routinezbao
Read event routine didn't get the correct BIOS callout. So it could not get the heap address. Then it would creat many warning in serial port. Change-Id: Ia35601bda1579c7f726ed767d7be78713ac185d2 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1266 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-26ibase/mb899: Rename NIC BIOS disable driver and hook upPatrick Georgi
The board has a marvell NIC, but the driver to disable NIC BIOS was adapted from a Realtek 8168 driver. Rename to reflect the change. Also hook up as driver, so coreboot can actually find it. Change-Id: Ibdfd6074eb28ba537d68552a3346b06493cef2a6 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1355 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-26Remove copies of rtl8168.cPatrick Georgi
One copy was slightly different, but all the differences were commented out Change-Id: I3cc7b5621c681a1eb286f9b16ef3ebdce03abb6b Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1356 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-25AMD parmer: Set correct azalia code verb tablezbao
Change-Id: I0b10080deb971cdefa4d3916fabd40f5a81b11f4 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1352 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25AMD family15tn: Add BIOS callback hook for getting VBIOS Imagezbao
This is for GfxInitSview(GnbSview.c). It would create warning message if it could not get VBIOS image. Change-Id: I3b2726f612b4b7a237644a4b63b56efad52b7ab5 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1351 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25AMD Family15tn: Set the mask of MTRR to 0000FFFXX0000800zbao
Remove the warning message from linux dmesg, mtrr: your BIOS has configured as incorrect mask, fixing it. Change-Id: I355509db12ab10c33b7c1c23e2c7c4783f30e67e Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1349 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25sync the northbridge.c with other family.zbao
Change-Id: Ice4d0202590fca0169dcda2770ca6add166b5c13 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1262 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24ChromeOS: Remove board specific acpi_get_vdat_info()Stefan Reinauer
The function acpi_get_vdat_info() was moved to the ChromeOS vendor code, and is no longer required to be present for each board. Hence, remove it. Change-Id: I3dc8dbb6119ceffa057373bad7c0058ac0d40eb8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1283 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Drop (empty) sandybridge_late_initialization()Stefan Reinauer
The function is empty (a left-over from i945) and should be removed. Change-Id: I91e573b5e37cb9133ea1037aef7e6daf3c292864 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1290 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Remove CMOS Extended range enable from romstageDuncan Laurie
This enable step has been moved to the bd82x6x bootblock. For Samsung Stumpy and Lumpy mainboards and the Intel EmeraldLake2 reference board. Change-Id: I5ce54f57b8e1dd732c8a5ae71d7511703de91a0e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1307 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24Move GGL0001 ACPI code to generic ChromeOS codeStefan Reinauer
The only difference in this code on all our platforms is the array describing the GPIOs. Hence, only keep that array in the mainboard ChromeOS directory and move everything else to generic ChromeOS ACPI code. Change-Id: I9fc75842af64530c1255bea1c5f803c5316d6da6 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1278 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-23AMD and GFXUMA: drop redundant use of lb_add_memory_range()Kyösti Mälkki
Use of uma_resource() in AMD northbridge code created a memory resource marked as reserved. Such resources are removed from system memory in write_coreboot_table(). Change-Id: Ib5e49e851d6622d8ece9d6d612e245b3962b9167 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1233 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-07-22Mainboard Parmer based on Trinityzbao
Parmer has. 1. Trinity, Socket FS1R2. 2. Hudson A75. Ubuntu has been validated on Parmer. S3 is supported. Change-Id: I1a6932d0ca9f7abe78dc24d3bc238a4b5a48281b Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1158 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-19Add missing quote.zbao
Remove the menuconfig warning which comes up every time. src/mainboard/asus/Kconfig:85:warning: multi-line strings not supported Change-Id: I0ec0a0b625a33edd1d9b250a26aa3e0f42142eca Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1240 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Move setup_uma_memory() to K8 northbridgeKyösti Mälkki
These boards had identical UMA code: amd/dbm690t amd/pistachio technexion/tim5690 technexion/tim8690 The ones below had whitespace or debug level change compared to the one above: kontron/kt690 siemens/sitemp_g1p1 These boards use AMDFAM10 guidelines in code: asrock/939a785gmh amd/mahogany Change-Id: Id7c3f48035727f5847f2d7c3a6e87a3d15582003 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1210 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Move setup_uma_memory() to AMDFAM10 northbridgeKyösti Mälkki
Following boards had identical code: advansus/a785e-i amd/bimini_fam10 amd/mahogany_fam10 asus/m5a88-v avalue/eax-785e gigabyte/ma78gm iei/kino-780am2-fam10 jetway/pa78vm5 Following boards had identical code: amd/tilapia_fam10 asus/m4a78-em asus/m4a785-m gigabyte/ma785gm gigabyte/ma785gmt In between the two, only whitespace difference. Change-Id: Iaa48cc7b0038ebcc81be49219b4fc87670aa9941 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1209 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Move setup_uma_memory() to Agesa Family14 northbridgeKyösti Mälkki
Following boards had identical code: amd/inagua amd/persimmon The following had only whitespace or debug level changes compared to ones above. amd/union_station amd/south_station asrock/e350m1 Change-Id: I11ee46e06e1dd510cba551166189ebcaa144464b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1208 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Move setup_uma_memory() to Agesa Family12 northbridgeKyösti Mälkki
Change-Id: Ieaf284c207f0cd4b2f6b804c52f949c16435d823 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1207 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Move setup_uma_memory() to Agesa Family15 northbridgeKyösti Mälkki
Change-Id: I5705623f5067823fae5986b3bcde58504a463508 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1206 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Define global uma_memory variablesKyösti Mälkki
Use of the uma_memory_base and _size variables is very scattered. Implementation of setup_uma_memory() will appear in each northbridge. It should be possible to do this setup entirely in northbridge code and get rid of the globals in a follow-up. Change-Id: I07ccd98c55a6bcaa8294ad9704b88d7afb341456 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-14Add ASUS DSBF mainboardSven Schnelle
Change-Id: Iad38b92ca3a582e5aec07b92c994bfbe78b09855 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1223 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-14Supermicro X7DB8: Use autogeneration of mptableSven Schnelle
And fix the wrong indenting of devicetree.cb while at it. Change-Id: Idbb19fb5d7155f44675098e79920caf65191c239 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1222 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-13Add preliminary support for Bachmann electronic OT200Christian Gmeiner
Linux boots fine :) Change-Id: Ifda06e5220666534b87f528deae16d8b956c32b3 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1225 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-12Drop Kconfig VAR_MTRR_HOLE optionKyösti Mälkki
All but one board use the default value of enabled. Disabling this can only increase the number of MTRR registers used. Change-Id: I7d28adc31b9fae2301e4ff78fcb96486f81d5ec2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1213 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-12Lenovo X60: correct SDHCI write protect polarityJonathan A. Kollasch
Change-Id: I916deffe2c692042f7e54c936902e77770ee69df Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/1205 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-07IEI PM-LX-800-R11: Removed bogus Kconfig optionRicardo Martins
The Kconfig file for this board contains a bogus option called CORE_GLIU, this change removes it. Change-Id: I4ea069bdd76be53085ebc9c0fb3dd71ffb2a12e1 Signed-off-by: Ricardo Martins <rasmartins@gmail.com> Reviewed-on: http://review.coreboot.org/1179 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-07-06IEI PM-LX-800-R11: Added preliminary mainboard supportRicardo Martins
Details for this board are available at http://www.ieiworld.com/product_groups/industrial/content.aspx?gid=00001000010000000001&cid=09050665574743104681&id=08142307826854456110 Most of the functionality provided by the original BIOS is implemented. Change-Id: Id9eb10a2f9e49377ea587bddadbba7d76223a715 Signed-off-by: Ricardo Martins <rasmartins@gmail.com> Reviewed-on: http://review.coreboot.org/1168 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-04Supermicro X7DB8: add w83793 Hardware monitorSven Schnelle
used for fan control and thermal management on that board. Change-Id: I4e5c986ab6174b7a356d682e21732c46181af211 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1167 Tested-by: build bot (Jenkins)
2012-07-03SMBIOS: move serial number and version out to KconfChristian Gmeiner
With this change it is possible to define serial number and version of the mainboard. These informations are used in SMBIOS tables. Change-Id: I1634882270f6cb94e00aceb7832e7fd14adc186b Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1163 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-02remove CONFIG_SERIAL_CPU_INITSven Schnelle
The new broadcast code doesn't support serial init - if a CPU needs serial init, this should be handled in the model specific CPU init code. Change-Id: I7cafb0af10d712366819ad0849f9b93558e9d46a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1140 Tested-by: build bot (Jenkins)
2012-06-24X60/T60: fix mptable LINT entriesSven Schnelle
They used MP_IRQ_TRIGGER_LEVEL, but it should be MP_IRQ_TRIGGER_EDGE. While at it, uses mptable_lintsrc() instead. Change-Id: Ie71311b8bf865889cf0d8808467df98af4b0132d Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1136 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-23Add Supermicro X7DB8 motherboardSven Schnelle
This adds basic supported for the Supermicro X7DB8. Basic means that almost all onboard peripherals are working. Known problems are: - mptable needs to be written dynamically. If you plan to use Add on cards, modify mptable.c according to your needs. A patch to add generic mptable autogeneration based on devicetree is coming up. Change-Id: I5eaac32a8bafa69a05929cf08d869127b9464661 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/493 Tested-by: build bot (Jenkins)
2012-06-12Update SB800 CIMX FADTMartin Roth
- Add #define to allow the FADT PM Profile to be overridden. - Change the location of the PMA_CNT_BLOCK_ADDRESS to match current documentation. - cst_cnt should be 0 if smi_cmd == 0 - add a couple of default access sizes. - Add a couple of #define values for unsupported C2 & C3 entries. - Add PM Profile override value into amd/persimmon platform. This does not use the #defines in acpi.h so that the files that include this don't all need to start including acpi.h. Change-Id: Ib11ef8f9346d42fcf653fae6e2752d62a40a3094 Signed-off-by: Martin L Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/1055 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-06-01Enable CONFIG_GFXUMA for roda/rk886exNico Huber
Without GFXUMA beeing set, MTRR initialization runs out of variable MTRRs. Change-Id: I5d1aa0d5fa2d72f17a0d88cae3fad880b489828c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1086 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-28Enable USE_OPTION_TABLE for ThinkPad X60Motiejus Jakštys
Without this option bluetooth configuration value in nvram is not consulted properly. It also enables built-in volume control (read-only). Tested on: ThinkPad X60s, 1702. Change-Id: I2fc6bb527c6e086a083e63922d1253eda7d4a36d Signed-off-by: Motiejus Jakštys <desired.mta@gmail.com> Reviewed-on: http://review.coreboot.org/985 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-05-26Move subsystem IDs to devicetree.cbStefan Reinauer
A while back coreboot was changed to read the subsystem IDs from devicetree.cb to allow each onboard PCI device to have its own subsystem id. When we originally branched, this was not the case, and the sandybridge/ivybridge mainboards have not been updated yet. Also, drop the subsystem ID from Emerald Lake 2, since it's not a Google device. Change-Id: Ie96fd67cd2ff65ad6ff725914e3bad843e78712e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1042 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-25Fix typo on Persimmon #if CONFIG_HAVE_ACPI_RESUMEMarc Jones
Stupid typo: APCI instead of ACPI in Persimmon. Change-Id: I6fd7f091cf1f5c4c0e1b57c21553dab93b545eab Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1054 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-05-24cbtypes.h: Unify cbtypes.h used in AMD board's codeVikram Narayanan
Remove all the repeated sections of code in cbtypes.h and place it in a common location. Add include dir in vendor code's Makefile. Change-Id: Ida92c2a7a88e9520b84b0dcbbf37cd5c9f63f798 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/912 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-05-21Fix Persimmon build without S3.Marc Jones
In the heap function, only check for S3 check when it is built in with CONFIG_HAVE_ACPI_RESUME. Change-Id: I439275a4e1b7b446b499bcf90c925785a14b980d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1034 Tested-by: build bot (Jenkins) Reviewed-by: Steve Goodrich <steve.goodrich@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-05-12Merge sb800 fadt fixes from South Station mainboard to southbridge fadt.Marc Jones
The South Station recieved updates that fix a number of fadt problems. South Station now uses the southbridge fadt. Change-Id: Ib990a69a359a4b7eae3431bb4323acd537acda1d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1021 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-10Unmark source files as executablesAlec Ari
Change source file modes from 755 to 644 The following files have been grepped for changes: *.c *.h *Kconfig* *Makefile* Change-Id: I275f42ac7c4df894380d0492bca65c16a057376c Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/1023 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-10Integrate MA785GM-US2H to KconfigAlec Ari
MA785GM-US2H was left out of Kconfig. This allows the option to select the board. Change-Id: I9efea96c21dcd0754ab51824b410435b0b5300c2 Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/1022 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-09Move fadt.c to the cimx sb800 southbridge directory to be shared.Marc Jones
The fadt.c is the same across all the platforms using the sb800 cimx southbridge wrapper. Change-Id: Ifbbfc238732aa46aef96297eaa188b77d27151f3 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1019 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-05-04siemens/sitemp_g1p1: Drop debug codePatrick Georgi
Change-Id: I40a4201b468131ba67e48ab68d62ca5413f2e2e8 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1000 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-26 19:15:55 +0000