summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-01-10mainboard/google/octopus: configure EC_AP_INT_ODLJett Rink
Enable the EC_AP_INT_ODL interrupt on GPIO_134 for all octopus boards that support it. Also removing unnecessary IO standby support since we don't use this pin to wake up the SoC. BRANCH=octopus BUG=b:122552125,b:120679547 TEST=CTS tests with changes Change-Id: I018864ae5fa400372b5b443e49828e8202b9aa4d Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/30788 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10amdfam10 boards: Simplify early resourcemapKyösti Mälkki
Purpose of the table is to load initial address maps on PCI function 0:18.1. Provide a macro of its own so it is clear no other PCI devfn is accessed here. Change-Id: Ic146207580a5625c4f6799693157b02422bef00a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30783 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10amdfam10 boards: Drop extern on apicid_sp5100Kyösti Mälkki
The value get_bus_conf() initialises this value to is discarded. Change-Id: I8382861574e6f8ab52839169502a5af7c3742daa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10sb/intel/common: Show "Add EC firmware" only for boards that need itJan Tatje
Most boards currently do not use EC firmware from SPI flash in the IFD, this hides this option by default and shows it only for boards that need it. A new config variable MAINBOARD_USES_IFD_EC_REGION is introduced to enable this option for boards that need it. The following list of boards requiring this was provided by Lijian Zhao: 1. intel/cannonlake_rvp 2. intel/coffeelake_rvp 3. intel/icelake_rvp 4. google/sarien 5. google/hatch Change-Id: I52ab977319d99a23a5e982cc01479fe801e172a7 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/c/30697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-10google/kukui: Correct boardid sources and add sku_idHung-Te Lin
Kukui is going to use ADC#4 as SKU ID, and utilizing EC BoardID as global board_id (i.e., board revision). BUG=b:122060615 TEST=make; manually tested on Kukui P1 board. Change-Id: I7bba368c141a7ba6db11f24b8e8e7158f0fc729e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10google/kukui: Complete board ID ADC valuesHung-Te Lin
The ID from ADC on Kukui supports 16 different values and we should list all voltage values ahead. BUG=b:80501386 TEST=make; manually verified on Kukui P1 Change-Id: Ic3abe07abfe818ca68e180c262fd431d1167b801 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10google/kukui: Correct boardid init valuesHung-Te Lin
From `boardid.h`, the uninitialized ID values should be BOARD_ID_INIT instead of BOARD_ID_UNKNOWN. BUG=b:80501386 TEST=make; manually verified on Kukui P1 Change-Id: Ie5267e575e38b92ec64a7317defbd00ee153fa0a Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10mb/foxconn/g41s-k: Add g41m variantArthur Heymans
Was tested with the following: - 2 DIMM slots - USB - Ethernet NIC - automatic fan control - Libgfxinit with VGA, DVI (HDMI slot unpopulated) - PS2 Keyboard - SATA - PEG - S3 resume What does not work: - Using the second DIMM slot on a channel G41 can only handle 2 ranks per channel and on this mainboard 1 rank per DIMM slot. Supporting this would require too much raminit rework and is not worth it (at least for me) Change-Id: I67784038ef929f561b82365f00db70a69c024321 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10mb/google/sarien: Add PDR and RW_LEGACY_NVRAM to FMAPDuncan Laurie
1) Add a Platform Data Region called SI_PDR which is allocated in the flash descriptor for this platform 2) Add a DIAG_NVRAM region for use by the diagnostic payload for non-volatile storage. 3) Encapsulate both RW_LEGACY and DIAG_NVRAM in a region called RW_DIAG so it is clear they are associated. 4) Move the RW_DIAG region to the start of the RW region so that once we can re-enable a larger BIOS region this sub-region will be in the uncached area since it is not accessed on a normal boot. BUG=b:119435206 TEST=tested on Arcada board to ensure expected regions are present Change-Id: Ieb8bc4cf70d0a931e4944210112cfaf5c543f9f3 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-10mb: Move timestamp_add_now to northbridge x4xElyes HAOUAS
Change-Id: Iacbee658a4049e1c13a120dbc21425ffb6a1cabb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10mb/google/hatch: enable CPU cluster deviceAamir Bohra
Change-Id: I28c67fbdf2b4f371c4b533b64cad2c4376ca2bd2 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30785 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10aopen/dxplplusu: Move timestamps to common codeKyösti Mälkki
First initialisation is already in cpu/intel/car/romstage.c. Change-Id: If3e5068b4a9981354f0fca5fc12b6b81de1c8f4b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10mb: Move timestamp_add_now to northbridge/amd/amdfam10Elyes HAOUAS
Also remove some commented code. Change-Id: If2e91ad871b14b305e2181194d77b100e72f5763 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10mainboard/amd: Drop incorrect Kconfig selectKyösti Mälkki
Copy-paste from fam15. Change-Id: I87af312870063aaa498bbfc2f059f69dcdab0094 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09soc/intel: Clean mess around UART_DEBUGNico Huber
Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-09Veyron: fix sdram config for Hynix H9CCNNNBKTMLBR-NTDLoop_Wu
Sdram config sdram-lpddr3-hynix-4GB.inc for H9CCNNNBKTMLBR-NTD can't boot on Mickey. It's confirmed that the right config for Hynix H9CCNNNBKTMLBR-NTD is sdram-lpddr3-hynix-2GB-BK.inc. BUG=b:122239609 BRANCH=master TEST=boot on mickey Change-Id: Ifeaadda50d939e0c118cb7fe3964dcd08b709c2a Signed-off-by: Loop_Wu <Loop_Wu@asus.com> Reviewed-on: https://review.coreboot.org/c/30761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-09amdfam10 boards: Use smp_write_pci_intsrc()Kyösti Mälkki
Radically reduces line lengths and splits '(bus<<2) | INT' to separate parameters. Change-Id: I6c924a70d00a9139719f8078bbf1e4d04b576324 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09mainboard/h8scm_fam10: Use apicid_sr5650Kyösti Mälkki
Do this for consistency and to ease further bulk-sed work on those lines. Change-Id: Ic9706de4278d163d1ba0c0706ec5d4c6c87ffa45 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09amdfam10 boards: Use PCI_DEVFN()Kyösti Mälkki
Change-Id: I7b9aeaaa1cfa20efc9d187d91ece4eb9ee659c3f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09mb/intel/kblrvp: Add helper function to get Board IdPraveen hodagatta pranesh
Add 2 helper function get_board_id() & get_spd_index() to read board id & spd index from EC. Rename the old get_board_id() function to get_ec_boardinfo(). BUG=None TEST= Tested on KBL RVP11, able to read the Board id (0x44) and verified in serial logs. not verified on KBL RVP8. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: Ie20bf0d45a3568c2c433e5b844bea86aac07c47d Reviewed-on: https://review.coreboot.org/c/30306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-09mb/intel/kblrvp: Enable overridetree support for variantsPraveen hodagatta pranesh
This patch add devicetree.cb in baseboard and overridetree.cb for RVP3, RVP7 and RVP8 variants. BUG= None TEST= build with BUILD_TIMELESS=1, static.c remains same on before & after enabling overridetree. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: Ib7d492e2a92aed10ad0426d57640d0ed56733847 Reviewed-on: https://review.coreboot.org/c/30623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09cpu/intel: Use the common code to initialize the romstage timestampsArthur Heymans
The initial timestamps are now pushed on the stack when entering the romstage C code. Tested on Asus P5QC. Change-Id: I88e972caafff5c53d8e68e85415f920c7341b92d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-09mb/google/hatch: Disable the SA IPU for hatchV Sowmya
This patch disables the SA IPU for hatch since it is not using the IPU. Change-Id: Ib2afc4cc4fd7ef98365b0b98130b0e8bc757ac2a Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-09google/kukui: Enable VBOOT_VBNV_FLASH to store VBNV in flashTristan Shieh
Reading nvdata from non-volatile flash storage. With this patch, it will pass the firmware test that corrupts FW_MAIN_A and boots up with FW_MAIN_B. BUG=b:80501386 BRANCH=none Test=test_that --board=kukui 172.23.213.147 firmware_CorruptFwSigA Change-Id: I9ef6bff019ee986ff018202bfd4d4a875526ec6c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/30701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-08samsung/lumpy: add cpu/gpu pwm backlight register valuesMatt DeVillier
Required for functional internal display on lumpy using libgfxinit or Tianocore GOP driver Test: boot/build lumpy, verify internal display functional prior to OS driver loading. Change-Id: If62a4ae58082548e8a645d1a2de40705bdd2946e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-08mb/google/sarien: Set minimum assertion width valuesDuncan Laurie
Explicitly configure the minimum assertion width values to ensure that they are set as expected and are not using unknown defaults. Change-Id: I9a88e5b6002137df6e572b84d0de8a69522938f9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08mb/google/sarien: Enable recovery mode GPIODuncan Laurie
Enable the active-low recovery mode GPIO now that new boards are available which have an external pull-up instead of a pull-down so it can be asserted properly by servo. This was tested on a Sarien system by holding the recovery button on the servo board and tapping the cold reset button and ensuring that it enters recovery mode. Change-Id: I3216580bc94de71b05bf9382f15d0c4d428cb9fa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08mb/google/sarien: Remove power button ACPI deviceDuncan Laurie
These platforms use the standard fixed function power button and do not need a second power button device declared or the kernel will end up with two devices reporting the same event. Change-Id: I6fe2b201a6a6f6307a0c4bd6a61f56cfcdd88bf4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08sb/intel/i82801gx: Autodisable functions based on devicetreeArthur Heymans
This removes the need to synchronize the devicetree and the romstage writing to FD. Change-Id: I83576599538a02d295fe00b35826f98d8c97d1cf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30244 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-08mb/{d41s,d510mo}: Remove references to PCIe port 5 and 6Arthur Heymans
The southbridge has the function disable bits for port 5 and 6 strapped RO to 1 (disable). Change-Id: I2948935d42b9031d61f9e5b3f06b769e68f5a042 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-08mb/{ga-g41m-es2l,d945gclf,rk886ex}: Fix devicetreeArthur Heymans
The devicetree was synced incorrectly with respect to the function disable register set in romstage. Change-Id: I189c5fdc433b5577ae008abf42878cdc6e3f2d52 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30711 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07nb/intel/gm45: Remove the C native graphic initArthur Heymans
Libgfxinit provides a better alternative to the native C init. While libgfxinit mandates an ada compiler, we want to encourage use of it since it is in much better shape and is actually maintained. This way libgfxinit also gets build-tested by Jenkins. Change-Id: I540cf08cef6ff7825694ebfa36e2e6437916e657 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/27016 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07mb/google/hatch: Enable touch panel supportMaulik V Vaghela
Following changes are done to enable touch screen support on hatch 1. Enable I2C1 device at 400Khz at 3.3V 2. Configure GPIO for touch screen 3. Add ACPI entry for ELAN touch panel 4. update GPIO table with not connected GPIO pins for panel BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I8dab07dad4cb197865bb9cf0e8da240810fcfabe Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-07src/mb/asus/p5qpl-am/romstage.c: Fix commentAngel Pons
Change-Id: I2b3ad53766bc9cef5ae00392814a03a3e177ad35 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/30705 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07mb/google/poppy/variant/rammus: enable USB acpimarxwang
Main objective for this change is to export the bluetooth reset gpio to the kernel for use in an rf-kill operation. To do so, we enable USB acpi and define all of the USB2 devices, which includes bluetooth's reset gpio information. BUG=b:119899987 TEST=build and flash to rammus, log into rammus and 'cat /sys/firmware/acpi/tables/SSDT > /tmp/ssdt.dml', copy that ssdt.dsml to /tmp/ssdt.dml on host machine, 'iasl -d /tmp/ssdt.dml', then verify that "reset gpio" shows up in the HS03 node's _DSD package in the table. Signed-off-by: marxwang <marx.wang@intel.com> Change-Id: Ieadb3609c7634a20e96c7c4dfb96f5e3f23e468b Reviewed-on: https://review.coreboot.org/c/30607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-07mb/google/sarien: Correct I2C bus clock for touchpadLijian Zhao
Elan touchpad require connected i2c clock to be running at 400Khz, with the modification can get 404Khz speed from Arcada EVT platform. BUG=b:119628524 TEST=Build and boot up on Arcada platform, measure the i2c clock is around 400Khz. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: If717cdd6b73394125df54d90f729ffb4ef37b087 Reviewed-on: https://review.coreboot.org/c/30653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-07mb/google/sarien: Modify ELAN Touchpad i2c bus clkJohn Su
Modify ELAN touchpad bus i2c clk from 466Khz to 400Khz. BUG=b:119628524 BRANCH=master TEST=measure ELAN Touchpad CLK Change-Id: Ia8433c6ef320cea9a0145db4ba440d67ccd0f41e Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30588 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07src: Use "foo **bar" instead of "foo ** bar"Elyes HAOUAS
Change-Id: I8260424ee243c06827f2b5939e1568e52539b282 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-01-06Kconfig: Unify power-after-failure optionsNico Huber
The newest and most useful incarnation was hiding in soc/intel/common/. We move it into the Mainboard menu and extend it with various flags to be selected to control the default and which options are visible. Also add a new `int` config MAINBOARD_POWER_FAILURE_STATE that moves the boolean to int conversion into Kconfig: 0 - S5 1 - S0 2 - previous state This patch focuses on the Kconfig code. The C code could be unified as well, e.g. starting with a common enum and safe wrapper around the get_option() call. TEST=Did what-jenkins-does with and without this commit and compared binaries. Nothing changed for the default configurations. Change-Id: I61259f864c8a8cfc7099cc2699059f972fa056c0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06mb/google/slippy: Add a VBT for all variantsArthur Heymans
The vbt was extracted from the option rom found on stock images. The vbt.bin is the same across all variants. The VBT has a modified BDB block 43, the 'Backlight info block' such that the inverter type for the panel in use is set to 2 (BDB_BACKLIGHT_TYPE_PWM) instead of 0 (BDB_BACKLIGHT_TYPE_NONE). This only seems to matter on Windows, as without it changing the backlight duty cycle does not work. Change-Id: I82c72c561e1058e0b77d80baf330b64f7c6b08e3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30487 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-06superio/*: Link early initialization into bootblockArthur Heymans
This allows to set up the SuperIO in the C_ENVIRONMENT_BOOTBLOCK bootblocks. It is likely unnecessary to do this in verstage. This also renames COMMON_ROMSTAGE to COMMON_PRE_RAM. Change-Id: I3d999611baa1e79c79fe6b1f01822ebaa5f85daf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06mb/google/fizz: enable eist (enhanced speedstep)Matt DeVillier
Without eist enabled, fizz's CPU clocks are locked at the base frequency, and don't scale up or down. This prevents fizz from idling properly and turbo boost from functioning, so enable it (as is done for all other KBL boards) Test: build/boot google/fizz, ensure CPU clocks scale as expected Change-Id: I77dd0e1df1bf88f5bae18e9f832ca8d60fb777b4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-06src/mb/apple/macbookair4_2: move early_southbridge.c to romstage.cAngel Pons
This is done for consistency purposes. Also fix a small formatting issue in a function. Change-Id: I5dc170dbca59b7abbc912f9a26f76886b25ad82f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/30654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06device: Use pcidev_path_behind()Kyösti Mälkki
Change-Id: Iac16f9412d0e6aac908d873c61a4de3935e5318a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26518 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-06device: Use pcidev_path_on_root()Kyösti Mälkki
Change-Id: I2e28b9f4ecaf258bff8a062b5a54cb3d8e2bb9b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06device: Use pcidev_on_root()Kyösti Mälkki
Change-Id: Icf34b39d80f6e46d32a39b68f38fb2752c0bcebc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-04mb/*/chromeos.c: Fix PRE_RAM and unify styleKyösti Mälkki
Change-Id: I99b9c0452ed0e6d580edb5a4f3317d776085b382 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30399 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04mb/google/jecht: Rename save_chromeos_gpios functionKyösti Mälkki
We have init_bootmode_straps() defined for the same purpose. Change-Id: Ia2692d8f8986247ea4ce889d6252d3c4c8b27bc4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30398 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04amdfam10 boards: Use defaults for get_pci1234()Kyösti Mälkki
Note that while these boards had entry 0x0ff0 in comparison to 0x0ffc of the get_default_pci1234() initialisation, the implementation of get_pci1234() unconditionally overrides the first entry. Change-Id: I8bec612f84fe3c3a0c21fc1e10629368857e9c5e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Use defaults for get_pci1234()Kyösti Mälkki
All these boards use the same default initialiser. As this is initialized late after device enumeration, it can't really be used to alter platform configuration. Change-Id: I30fc0298081df0442ec4e9a527340b93a3cd6106 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 04:34:11 +0000