summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-07-31soc/amd/stoneyridge: Move ACPI MADT table to socMarc Jones
Move the mainboard MADT tables to generic soc ACPI code. Change-Id: I49fb55b1315da8fe65421b43fc4312ed588d5ecb Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20277 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-31google/kahlee: Add EC and GNVS ACPIMarc Jones
Add ACPI support for the Google EC, which requires GNVS support for passing information from the EC to firmware and OS. Change-Id: I0a308bcd608a135cc9633273a05527f020b60743 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/20276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Enable TPMMarc Jones
Set up the TPM decode to SPI prior to verstage. Enable LPC TPM and remove the mock data. Note, Kahlee TPM is on SPI, but decoded by the LPC block. BRANCH=none BUG=b:62103024 TEST=coreboot and Depthcharge reports TPM found. Change-Id: Iab92259ebeaa40937309fad05cc45d9ca6d41357 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Save VBNV data to CMOSMarc Jones
Store VBOOT NV data in CMOS. This allows VBOOT to save flags and data to be used in multiple stages and depthcharge. Fixes developer mode USB boot. Change-Id: I50b45e687a1a1c71838bcc390212b28d7e634a19 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Set DDI port 2 to DPMarshall Dawson
Set DDI port 2 type to Display Port. Change-Id: Idc5e57e01d4f0073ac50533c1b04a95bcae67473 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31google/kahlee: Setup the I2S audio codecMarshall Dawson
Inform AGESA to setup an I2S codec instead of an Azalia codec. This is step one for audio to work. ASL to connect the driver and the hardware is in a follow-on patch. Change-Id: I7ece5d8c317ddc76e0e6b2a005256bc384fe51e2 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/19841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-30intel/sandybridge: Clean VGA BIOS ids up a littleNico Huber
Sync map_oprom_vendev() and autoport with the list of PCI ids in the `gma.c` driver, remove one obsolete Kconfig default override. Change-Id: I12f24f415b695c516fbb947114e09c873af2e439 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-07-30intel/sandybridge: Gather MMCONF_BASE_ADDRESS defaultsNico Huber
All affected boards did the same USE_NATIVE_RAMINIT distinction or actually selected USE_NATIVE_RAMINIT. Also update autoport. Change-Id: I924c43cec1e36e84db40e4b8e1dd0e05cad2b978 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20813 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-07-28google/kahlee: Add ASL for Elan touchpadIvy Jian
Add ASL for the Elan touchpad driver connection in ChromeOS. This is based on the Auron and Rambi ASL. The AMD ACPI code doesn't have the auto table generation the newer Intel Chrome SOC use. Device visible to OS: /sys/bus/acpi/devices/ELAN0000 Change-Id: Id3fc8c8855b0296f43a502e81143498d663468ec Signed-off-by: Ivy Jian <ivy_jian@compal.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28google/kahlee: Fix ASL whitespace and formattingMarc Jones
Clean up the ASL whitespace and formatting to match the iasl -d style as other parts of coreboot. Change-Id: I61689cb55dc26cbad160d45aa0a36c00b386fe0c Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28google/kahlee: Remove conflicting AAHB IRQ ASLIvy Jian
The AMD internal A-link (AAHB device) doesn't support an IRQ, so remove it. This solves a conflict with the GPIO IRQ required for touchpad operation. Change-Id: Iefaf33cfb2babc29d35b5372fc3a338a72c78a4a Signed-off-by: Ivy Jian <ivy_jian@compal.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28mb/google/soraka: configure GPP_B8 to control WLAN_PE_RSTRizwan Qureshi
WLAN_PE_RST control was moved from EC to SoC, it connected to GPP_B8. Configure GPP_B8 to drive low. TEST=Wifi card is detected and connect to an AP. Change-Id: I6a6ea0ddefe8402284fe37665864c7a1961cbc15 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/20804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-27google/kahlee: Set SERIRQ to continuous modeMarc Jones
The Kahlee Nuvoton EC firmware doesn't support SERIRQ quiet mode, yet. Set continuous mode until the quiet mode feature is available. This allows keyboard and other EC based interrupts through. Change-Id: If77c91fde2bd0f4da85413879fefb753ae6297de Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19840 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Pass GPIO setting in amdinitenvMarshall Dawson
GPIOs for I2C3 were being unset in amdinitmid if the GPIO enable table wasn't passed. It had been initialy set in amdinitreset. Pull the GPIO settings into their own file that can be used in bootblock and later stages. Change-Id: I41cd7873f8c8543c95ad8653e0a3887f7d0487a2 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Update PCIe link/lane configurationMarshall Dawson
Enable: GPP0 x1 - WLan GPP1 x1 - Card Reader Change-Id: Idbfc2a3260b85949810bdd8dc904e59f8a779e48 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Set FADT legacy and 8042 supportedMarc Jones
The EC is a legacy 8042 device. Don't set LEGACY_FREE and correctly report in the FADT. Change-Id: I041ea4b44372178f3d6073b6ebc8003abc097703 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19836 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27google/kahlee: Add ChromeOS and ChromeECMarshall Dawson
Add the basics for building as a ChromeOS device. ChromeOS and ChromeEC are dependent on each other, so bring them in together. The EC is a Nuvoton and you can find additional details in the Chromium EC repo. Add the Google HWID "Kahlee TEST 6421". The chromeos.fmd for Kahlee takes advantage of the AGESA located outside cbfs and includes typical RW, VPD, and MRC areas. There are some updates required to depthcharge, vboot, GPIOs, and the ChromeEC before we have a complete-ish system. Change-Id: Ifb0a6afc01dd80ef9e7bb81039d9152936043999 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27google/kahlee: Update GPIO tableMarshall Dawson
Update GPIO settings based on the schematic. Change-Id: Ic8a876198a3ba9029d1aabb273418923e40bfcc6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-27google/kahlee: Update for single DIMMMarshall Dawson
Update for a single DIMM with an SPD at address A0. Change-Id: I646f079c99cbaffd7094773243600c3030308325 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19833 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27google/kahlee: Remove AMD IMCMarshall Dawson
Kahlee does not use the AMD IMC. Remove the files and calls. Change-Id: Ia837551b592b4f473eb38c06c516586fb6c95c88 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19832 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27google/kahlee: Update KconfigMarc Jones
Update for the Stoney Ridge FT4 package and the on chip UART. Change-Id: I11468834a9ef03da084c156c74d55a19416d98c4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19831 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27google/kahlee: Start Kahlee mainboardMarc Jones
Copied from amd/gardenia. Update the appropriate board name strings. Uses the soc/ structure. Change-Id: Ia68b16969518f4d63d5d2dea7658a472b2daca05 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27soc/amd/common: Convert to C_ENVIRONMENT_BOOTBLOCKMarshall Dawson
Add dedicated CAR setup and teardown functions and Kconfig options to force their inclusion into the build. The .S files are mostly duplicated code from the old cache_as_ram.inc file. The .S files use global proc names in anticipation for use with the Kconfig symbols C_ENVIRONMENT_BOOTBLOCK and POSTCAR_STAGE. Move the mainboard romstage functionality into the soc directory and change the function name to be compatible with the call from assembly_entry.S. Drop the BIST check like other devices. Move InitReset and InitEarly to bootblock. These AGESA entry points set some default settings, and release/recapture the AP cores. There are currently some early dependencies on InitReset. Future work should include: * Pull the necessary functionality from InitReset into bootblock * Move InitReset and InitEarly to car_stage_entry() and out of bootblock - Add a mechanism for the BSP to give the APs an address to call and skip most of bootblock and verstage (when available) (1) - Reunify BiosCallOuts.c and OemCustomize.c (1) During the InitReset call, the BSP enables the APs by setting core enable bits in F18F0x1DC and APs begin fetching/executing from the reset vector. The BSP waits for all APs to also reach InitReset, where they enter an endless loop. The BSP sends a command to them to execute a HLT instruction and the BSP eventually returns from InitReset. The goal would be to preserve this process but prevent APs from rerunning early code. Change-Id: I811c7ef875b980874f3c4b1f234f969ae5618c44 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-27siemens/mc_apl1: Select skip RAPL configurationMario Scheithauer
The mc_apl1 mainboard needs to disable the RAPL algorithm for a constant power management of the processor package. An active RAPL algorithm leads to negative effects with our real time software. Change-Id: I09ca56a034fd3896a000e64cac35f12fb507a682 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27mainboard/google/poppy: Configure GPIO.1 and GPIO.2 for daisy chain modeV Sowmya
Configure GPIO.1 and GPIO.2 as sensor SDA and SCL respectively for TPS68470 PMIC in daisy chain mode. * GPIO.1: Sensor SDA in daisy chain mode. * GPIO.2: Sensor SCL in daisy chain mode. BUG=b:38326541 BRANCH=none TEST=Build and boot soraka. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successful. Change-Id: I7f9686427772a33c06e4cdaafee9b0349d700639 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-27mb/google/kblrvp: Add camera devices power sequencing through ACPI power ↵V Sowmya
resources This patch controls the camera devices power through ACPI power resource. * Add Opregions for PMIC1 and PMIC2, * TI_PMIC_POWER_OPREGION * TI_PMIC_VR_VAL_OPREGION * TI_PMIC_CLK_OPREGION * TI_PMIC_CLK_FREQ_OPREGION * Add power resources for sensors and VCM, * OVTH for CAM0 * OVFI for CAM1 * VCMP for VCM * Implement _ON and _OFF methods for sensor and VCM module's power on and power off sequences. BUG=none BRANCH=none TEST=Build and boot kblrvp. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successful. Change-Id: I02c4784ab3f4d6e1f0e657ad50b727ff11da8b9c Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-27mb/google/kblrvp: Configure ports and endpoints for sensor and CIO2 devicesV Sowmya
Bind the camera sensor and CIO2 devices through the ports and endpoints configuration available in _DSD ACPI object. * Port represents an interface in a device. * Endpoint represents a connection to that interface. BUG=none BRANCH=none TEST=Build and boot kblrvp. Dump and verify that the generated DSDT table has the required entries. Change-Id: If328864dbb61586a4887c7fcae740a12eda7cc92 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-27mainboard/intel/kblrvp: Add MIPI camera supportV Sowmya
This patch adds mipi_camera.asl and enables I2C2, I2C3, CIO2 and IMGU devices, * Add TPS68470 PMIC1 and PMIC2 related ACPI objects. * Add OV cameras related ACPI objects. * Add Dongwoon AF DAC related ACPI objects. * SSDB: Sensor specific database for camera sensor. * CAMD: ACPI object to specify the camera device type. KBLRVP has two PMIC's sitting on I2C2 and I2C3. CAM0 and CAM1 power requirements are handled by PMIC1 and PMIC2 respectively. BUG=none BRANCH=none TEST=Build and boot kblrvp. Dump and verify that the generated DSDT table has the required entries. Change-Id: Ibaf26dad74ca1e7c9f415ae75c4ed8558ad99e2f Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-26intel/cannonlake_rvp: Split RVP boards and SPDLijian Zhao
Add both Cannonlake U DDR4 RVP and Cannonlake Y LPDDR4 RVP support. Implement SPD entry to FSPM for both platforms, seperated platform specific DQ/DQS/Rcomp input to FSPM as well. Change-Id: If71662353ddba89a9e831503a2d80dd5ebd65de3 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-26mainboard/intel/glkrvp: configure RAPL PL1 for GLKCole Nelson
Sets RAPL PL1 power to ~6W. Note: 7.5W setting gives a run-time 6W actual measured power. Tested on GLK w/kernel 4.11.0 by reading MSR 0x610 at runtime and comparing to measured power on an instrumented board. Change-Id: I07caeb2895a579387025d3b0fb7f1d2c3d5e2665 Signed-off-by: Cole Nelson <colex.nelson@intel.com> Reviewed-on: https://review.coreboot.org/19746 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-26mainboard/intel/glkrvp: Add support for GLKRVPHannah Williams
GLKRVP is a reference board for GLK SOC RVP1 has DDR4 and RVP2 has LPDDR4 RVP2 is enabled by default and CONFIG_IS_GLK_RVP_1 should be selected if building for RVP1 GLKRVP can work with internal Intel EC or external Chrome EC AIC. For internal EC, CONFIG_EC_GOOGLE_CHROMEEC will not be selected ( CONFIG_GLK_INTEL_EC should be selected for internal EC config) By default, CONFIG_GLK_CHROME_EC is selected for external ChromeEC AIC config. Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: Iab688aca6a4f5c5e32801215ba3a1a440e50fbef Reviewed-on: https://review.coreboot.org/19604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-25amd/gardenia: Correct PCIe port settingsMarshall Dawson
Fix the OEM settings for two ports. Fix and clarify comments to reflect Rev. B of the board design. Change-Id: I2812ea5945f67229872e78041c771606047bbbec Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20744 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-25amd/gardenia: Fix IS_ENABLED for fan controlMarshall Dawson
Convert from #if to if(). Change-Id: I50b3ed9ecd5947ff625536b196d90ebd4e8f1c56 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-25amd/gardenia: Fix IS_ENABLED for xHCIMarshall Dawson
Convert from #if to if(). Change-Id: I7c149856da22b72d2a83bd7f06d031df328dbb35 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-24google/reef: Configure EN_PP3300_DX_LTE on coralPatrick Georgi
BUG=b:63876329 BRANCH=none TEST=none Change-Id: I98c700d5b928c031129cf0138d22652a28d1ad1d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-24google/reef: copy gpio.c for coralPatrick Georgi
It requires changes to match the hardware. Except for the weak attributes that are now removed in coral's copy, the file is identical to the baseboard version. BUG=b:63876329 BRANCH=none TEST=none Change-Id: Ib0c5f0ecae9919f20631dacef0253416989fb011 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-24mb/lenovo/t430: Disable `usb_always_on` by default in CMOSPatrick Rudolph
Fix regression introduced by commit 7ffb329f. The default value for usb_always_on is no longer sane and is replaced by the same default that is used on all other boards (disabled). Change-Id: Ia8854a8491bc56507d01e08e1ca1e195a1d62bfc Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-24Update files with no newline at the endMartin Roth
Change-Id: I8febb8d74e2463622cab0313c543ceebec71fdf4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-24Fix files with multiple newlines at the end.Martin Roth
Change-Id: Iaab26033e947cb9cf299faf1ce6d40a90a9facbe Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20704 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-24mainboard/google/soraka: pull high TOUCHSCREEN_STOP_L pinWisley Chen
After updating to Wacom Firmware version 501, touchscreen can't work. Wacom FW (ver. 501) enables STOP function. STOP Pin: High: Normal Operation Low: Stop Scanning So pull TOUCHSCREEN_STOP_L high BUG=b:37007801, b:37265219 BRANCH=none TEST=manual testing on Soraka board and touchscreen works at boot and after suspend/resume. Change-Id: I8a2bdce1554fd99dea30cf91fa48d0529f40b7b0 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/20664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-23asus/p2b-d: Use romstage from asus/p2b-ds.Keith Hui
The romstage for both is line-for-line identical. Merge both into P2B-DS so it benefits from my modernization efforts. Change-Id: Idd964f4c5c4dfd9e2e0ac4a4f41e4ee9a84a729c Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-23asus/p2b-f: Use romstage from asus/p2b-ls.Keith Hui
The romstage for both is line-for-line identical. Merge both into P2B-LS so it benefits from my modernization efforts. Change-Id: I2d1a46236f83a4955ceb5e98b576cce0560f28df Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-23440BX boards: Drop unused #includes from romstageKeith Hui
Romstage of many 440BX boards included headers that are not used. Remove them as part of a bigger cleanup effort. Change-Id: I89ddeda3c90e1a4907c05851185b69f3b29e54ba Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-23asus/p2b-ls: Drop onboard LAN from devicetree.cbKeith Hui
I am able to complete a board-status run over onboard ethernet (ie. it works) without this entry, so it's not necessary. Change-Id: Iabdf1a1ff3c904bea1b7b5eaefb1d23831dd2cb9 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-07-23mainboard/google/{poppy,soraka}: Enable S0ixRajat Jain
Enable S0ix for poppy and soraka in their device trees respectively. BUG=b:36630881 BRANCH=none TEST=Verified S0ix and S3 operation on Poppy and Soraka (250+ iterations). Change-Id: I9ba91499e54f729970448af6f71804ad5b3cb836 Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-22mainboard/google/poppy/variants/soraka: Update GPP_{D1,D2,B7} configFurquan Shaikh
GPP_B7, GPP_D1 and GPP_D2 are not used going forward. Mark them as NC in gpio table. BUG=b:62322846,b:62240755 Change-Id: I7aee08314e6ce96d5913ae315bf75f5c04ab7370 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20672 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-22mainboard/google/poppy/variants/soraka: Define separate gpio tablesFurquan Shaikh
Now that soraka is starting to deviate from the baseboard w.r.t. gpio settings, make a new copy of gpio table before we make any variant-specific changes in it. BUG=b:62240755,b:62322846 BRANCH=None TEST=Verified with gpio_debug=1 in skylake/gpio.c that the gpio configuration before and after this change remains same. Change-Id: I448d18f18b63e9bfb739c518d599de3b9b602dc2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-20siemens/mc_apl1: Activate ECC for DRAMMario Scheithauer
This mainboard is equipped with DDR3L modules which support ECC. The BWG says that for activating ECC the FSP-M parameter MemoryDown must be set to 5. Change-Id: Idc68df1e2bae2396c9b9788d4a026a75b7d9119b Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-07-20siemens/mc_apl1: Include platform.aslMario Scheithauer
The OS of this mainboard needs the _PIC method for the selection of the type of interrupt routing. Change-Id: Ic82ba1b368aff0030422d9602ebc882247a2191b Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/20618 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-07-19mainboard/intel/cannonlake_rvp: Add initial board filesAndrey Petrov
Initial board files needed to selected to build cannonlake rvp. Change-Id: I82bd5c785e451f02b827765c54d432517afd7de0 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 11:17:32 +0000