summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2012-12-01Drop TINY_BOOTBLOCKKyösti Mälkki
Change-Id: I38ea2ed2be4d9240ec8cb6d5dc5b3cc578cdaefb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1963 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-30Supermicro h8scm: add agesa version of supermicroSiyuan Wang
Supermicro h8scm has a C32 CPU socket, the details of this board is: http://www.supermicro.com/Aplus/motherboard/Opteron4100/SR56x0/H8SCM-F.cfm We are planning to replace legacy C32 code with agesa and the h8scm_fam10 do not support family 15 CPU, so we update this mainboard with this patch. This code supports memory at 800M Hz of f10 CPU, bu f15 CPU does not has this limitation. If you want to change the frequency of memory, please edit the macros "BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT" and "BLDCFG_MEMORY_CLOCK_SELECT" in src/mainboard/supermicro/h8scm/buildOpts.c Change-Id: I9ca9e70d7f3e82c07e7d36695bf31008db152afb Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1510 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-30AMD SB800: Interrupt routine for PCI slots on PersimmonZheng Bao
Set the correct device number in the pcie interrupt routine in ACPI asl. The device number is decided by which address pin is connected to IDSEL. Table 3-1: IDSEL Generation Primary Address AD[15::11] Secondary Address AD[31::16] 0 0000 0000 0000 0000 0001 0 0001 0000 0000 0000 0010 0 0010 0000 0000 0000 0100 0 0011 0000 0000 0000 1000 0 0100 0000 0000 0001 0000 0 0101 0000 0000 0010 0000 0 0110 0000 0000 0100 0000 0 0111 0000 0000 1000 0000 0 1000 0000 0001 0000 0000 0 1001 0000 0010 0000 0000 0 1010 0000 0100 0000 0000 0 1011 0000 1000 0000 0000 0 1100 0001 0000 0000 0000 0 1101 0010 0000 0000 0000 0 1110 0100 0000 0000 0000 0 1111 1000 0000 0000 0000 1 xxxx 0000 0000 0000 0000 On persimmon, PCI slot 0's IDSEL is connected to AD19, so the device number is 3. Slot 1's IDSEL is connected to AD20, so the device number is 4. Change-Id: Ic0fb7ac1c87ec306bf314e4d2b8c2bdc9031081b Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1610 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-30Persimmon: Disable the unused PCI clocksDave Frodin
Change-Id: I4b735fe4e6441f99236e43b34695fdac95b8888a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1875 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-30Lumpy: Need byteorder.h in romstageStefan Reinauer
Not sure why this never triggered an error before. Change-Id: I85d8b3b862492df04163a5f751c7ea4288406860 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1946 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2012-11-29Drop empty mainboard.cKyösti Mälkki
Change-Id: Idcf9349d96297b8cb0ea1e68769e02659ac16ab8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1933 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-29Drop empty mainboard_opsKyösti Mälkki
Change-Id: I24866142eebcb8fdbc7e21f5b2f364a8d1b264b3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1932 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-28Remove assembly coded log2 functionRonald G. Minnich
As we move to supporting other systems we need to get rid of assembly where we can. The log2 function in src/lib is identical to the assembly one (tested for all 32-bit signed integers :-) and takes about 10 ns to run as opposed to 5ns for the non-portable assembly version. While speed is good, I think we can spare the 15 ns or so we add to boot time by using the C version only. Change-Id: Icafa565eae282c85fa5fc01b3bd1f110cd9aaa91 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1928 Tested-by: build bot (Jenkins)
2012-11-28amdk8/amdfam10: Use CAR_GLOBAL for sysinfoPatrick Georgi
This gets rid of the somewhat unstructured placement of AMD's sysinfo structure in CAR. We used to carve out some CAR space using a Kconfig variable, and then put sysinfo there manually (by "virtue" of pointer magic). Now it's a variable with the CAR_GLOBAL qualifier, and build system magic. For this, the following steps were done (but must happen together since the intermediates won't build): - Add new CAR_GLOBAL sysinfo_car - point all sysinfo pointers to sysinfo_car instead of GLOBAL_VAR - remove DCACHE_RAM_GLOBAL_VAR_SIZE - from CAR setup (no need to reserve the space) - commented out code (that was commented out for years) - only copy sizeof(sysinfo) into RAM after ram init, where before it copied the whole GLOBAL_VAR area. - from Kconfig Change-Id: I3cbcccd883ca6751326c8e32afde2eb0c91229ed Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1887 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-27Drop driver-y from GM45/ICH9/RK9Stefan Reinauer
This broke because those components were not yet committed when the patch to drop the driver class was made. Change-Id: I29948223503a6c4b196eafa169c064cd26da1be1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1934 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-27Remove AMD special case for LAPIC based udelay()Patrick Georgi
- Optionally override FSB clock detection in generic LAPIC code with constant value. - Override on AMD Model fxx, 10xxx, agesa CPUs with 200MHz - compile LAPIC code for romstage, too - Remove #include ".../apic_timer.c" in AMD based mainboards - Remove custom udelay implementation from intel northbridges' romstages Future work: - remove the compile time special case (requires some cpuid based switching) - drop northbridge udelay implementations (i945, i5000) if not required anymore (eg. can SMM use the LAPIC timer?) Change-Id: I25bacaa2163f5e96ab7f3eaf1994ab6899eff054 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1618 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-27Fix technexion tim5690 board VGA handlerStefan Reinauer
When dropping ramstage.a, unused functions with unresolved symbols are not silently dropped anymore. This makes the tim5690 compilation fail. This fix makes sure we don't compile in the int15 handler code when we don't set CONFIG_VGA_ROM_RUN Change-Id: If6872c983d9fd811eb33259421f94b551f3b9b34 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1929 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-27Drop duplicate files that prevent building without ramstage.aStefan Reinauer
When dropping ramstage.a duplicate symbols in ramstage will start breaking the build. Hence drop all the duplicate functions implemented by mainboards that have those functions in generic or component code already. Change-Id: I5cf8245c67b6f0f348388db54256d28f47017a61 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1865 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-27Get rid of drivers classPatrick Georgi
The use of ramstage.a required the build system to handle some object files in a special way, which were put in the drivers class. These object files didn't provide any symbols that were used directly (but only via linker magic), and so the linker never considered them for inclusion. With ramstage.a gone, we can drop this special class, too. Change-Id: I6f1369e08d7d12266b506a5597c3a139c5c41a55 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-27roda/rk886ex: Correct COMB irq reading / reduce warningsNico Huber
The calculation of COMB's irq reading was wrong by the 4-bit shift. Also, the asl compiler warned about the splitting in lo/hi bytes which seems unnecessary. Change-Id: Ia5101d5a19f68c2da827d7e37a18922f959604c7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1923 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-27roda/rk9: Fix for VGABIOS changesPatrick Georgi
Forgot to update the rk9 for the unified VGABIOS handling. This applies to rk9 what is done for other boards in commits 3c84261e84318708c9c16ee5df5c2549c609dd0a d5d340695b84ef6351818236dc514cd9734e87b1 Change-Id: I892b7d81927e277778c1c5251d27416fa79c9868 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1924 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-27roda/rk9: New mainboardPatrick Georgi
Roda RK9 is a notebook based on the GM45/ICH9 platform using DDR3 memory. http://roda-computer.com/products/notebooks/rk9/ Tested with various Linux versions, known to work: - 2x4GB RAM - IGD - HD Audio - UHCI, EHCI - AHCI - NIC - PCI - PS/2 keyboard - serial console - ACPI lid switch - ACPI battery/AC events - power off, reboot Change-Id: I7299dccbff2eea3544363fdd4f49f05aa3dae7bc Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1691 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-24Remove duplicate VGA BIOS interrupt handlersPatrick Georgi
Some boards have two instances of the int15 handler that supports the onboard VGA BIOS, for YABEL and realmode. These are now similar enough that they can be deduplicated. Due to minor differences this requires manual effort. Change-Id: I03ae314cb90dd65d96591ce448504aa961cbeb88 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1893 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-24yabel: Use X86_* instead of the more verbose M.x86.REG_*Patrick Georgi
Makes it more similar to what realmode looks like. Change-Id: I4407431f2d979c43dd186114d67ed11845907afe Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1892 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-24x86 realmode: Use x86emu register file + definesPatrick Georgi
By using the (global) register file as defined by x86emu, we can use the same register access for YABEL and realmode interrupt handlers. - the x86 realmode interrupt handlers changed in signature - to access registers, use X86_$REGNAME now (eg. X86_EAX) - x86_exception_handler still uses struct eregs *regs to avoid spilling the x86emu register file stuff everywhere Coccinelle script that handled most of this commit: @ inthandler @ identifier FUNC, regs; @@ int FUNC( -struct eregs *regs +void ) { ... } @ depends on inthandler @ identifier regs; @@ -regs->eax +X86_EAX @ depends on inthandler @ identifier regs; @@ -regs->ebx +X86_EBX @ depends on inthandler @ identifier regs; @@ -regs->ecx +X86_ECX @ depends on inthandler @ identifier regs; @@ -regs->edx +X86_EDX @ depends on inthandler @ identifier regs; @@ -regs->esi +X86_ESI @ depends on inthandler @ identifier regs; @@ -regs->edi +X86_EDI @ depends on inthandler @ identifier regs; @@ -regs->eflags +X86_EFLAGS @ depends on inthandler @ identifier regs; @@ -regs->vector +M.x86.intno Change-Id: I60cc2c36646fe4b7f97457b1e297e3df086daa36 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1891 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-24x86 realmode: Adapt to x86emu/YABEL style return codesPatrick Georgi
realmode int handlers must return the same codes as the YABEL int handlers now: 1 for "interrupt handled", 0 for "not handled" (ie. error). Change-Id: Idc01cf64e2c97150fc4643671a0bc4cca2ae6668 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1890 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-20Persimmon: Disable the unused GPP PCIe clocksDave Frodin
Change-Id: I4128af7912bec090bbd48acc1b20d0452e7a4a28 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1876 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-20Unify use of bool config variablesStefan Reinauer
e.g. -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS This will make it easier to switch over to use the config_enabled() macro later on. Change-Id: I0bcf223669318a7b1105534087c7675a74c1dd8a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1874 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-19siemens/sitemp_g1p1: Drop copy of cmos checksum calculationPatrick Georgi
This code used a special case for checksum calculation to prevent the century byte from messing things up, since writes "sometimes" didn't happen. That should be stable now, so the special case isn't necessary. Downside: On century rollovers (ie. 1999-12-31, 2099-12-31) CMOS will be reset to the defaults. Change-Id: Ibe589a1ec953b7b3ba39be30cebd9fc2b27326ae Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1870 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-16Fix PIRQ routing abstractionStefan Reinauer
intel_irq_routing_table is a local structure that should not be used globally, because it might not be there on all mainboards. Instead, the API has to be corrected to allow passing a PIRQ table in where needed. Change-Id: Icf08928b67727a366639b648bf6aac8e1a87e765 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1862 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Fix Kconfig GENERATE_*_TABLE usageStefan Reinauer
Some boards selected GENERATE_ instead of HAVE_ Change-Id: I450c22d7b044f0c88c21692246d452d516a68a83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1841 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-16Drop Kconfig variable BOARD_HAS_HARD_RESETStefan Reinauer
hard_reset was indeed consolidated and moved into the southbridge code a while ago, but the config variable was still kept alife, with some duplicate code. Change-Id: I60d4a87de916667f6e89353dfbe1a7b9eca380f7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1837 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-16Drop unneeded BOARD_HAS_FADT optionStefan Reinauer
Change-Id: Iaaeee87d70cf052bc7980007cdf1f7dda88b3623 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-16Reduce number of per-mainboard changesStefan Reinauer
- Add mainboard_smi.c from arch/x86/Makefile if it's there - Add mainboard's chromeos.c from the chromeos Makefile Change-Id: I3f80e2cb368f88d2a38036895a19f3576dd9553b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1835 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Drop CONFIG_HAVE_BUS_CONFIG, clean up KconfigStefan Reinauer
This patch is the beginning of a Kconfig cleanup series - drop CONFIG_HAVE_BUS_CONFIG and add get_bus_conf.c if it exists in the mainboard directory - drop duplicate ACPI_SSDTX_NUM from mainboard Kconfig if it only defines the defaul value of 0 - Add mptable.c, fadt.c, reset.c and ssdtX.asl when they exist, not based on some Kconfig magic Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ia14a7116dad6a724af7e531920fee9a51fd0b200 Reviewed-on: http://review.coreboot.org/1832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-14Use mainboard hook for HP DL165Kyösti Mälkki
The board incorrectly overrides the southbridge hook, so use the new mainboard hook instead. This change also activates the actual southbridge hook to enable decode of complete 4 MB flash memory region. Change-Id: I02c6fe89ae9ad4a7403f024fac875ebd88a8e142 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1831 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14ms9652: fix misuse of LIFT_BSP_APIC_IDStefan Reinauer
It's a bool, not a number Change-Id: I70d52c6af6703101dbd534970ec65275902a283d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1842 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14mainboard/siemens/sitemp_g1p1: Fix YABEL usageNico Huber
The board was broken for use with CONFIG_PCI_OPTION_ROM_RUN_YABEL. Change-Id: Ia57d630143386fe637af83b9e7345d0d3750b089 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1854 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14mainboard/siemens/sitemp_g1p1: Fix CMOS checksum algorithm here, tooNico Huber
Some time ago our CMOS checksum algorithm was changed under the topic: Fix our CMOS checksum algorithm so it matches what /dev/nvram expects Here is another copy of the algorithm that had to be updated. Change-Id: I58659c7b8a89c89c76efdff405ee0620e7302277 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1852 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14Move HAVE_SMI_HANDLER from mainboards to chipsetsStefan Reinauer
Change-Id: Ibb6606fe3996e377181872a4544600f2d58c5439 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1834 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14SMM: Save the GNVS pointer when creating APCI tablesDuncan Laurie
At boot time when the ACPI tables are created and the location of GNVS is determined then save that address for resume time. This also sets the values of USB charging in S3/S5 to the expected default values for Stout/Butterfly that were not set correctly. Change-Id: I9b94b868aa6e81aced06c0262cc2697ad4faf1e6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1768 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14SMM: Avoid use of global variables in SMI handlerDuncan Laurie
Using global variables with the TSEG is a bad idea because they are not relocated properly right now. Instead make the variables static and add accessor functions for the rest of SMM to use. At the same time drop the tcg/smi1 pointers as they are not setup or ever used. (the debug output is added back in a subsequent commit) Change-Id: If0b2d47df4e482ead71bf713c1ef748da840073b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1764 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Export optionrom status on Stumpy/LumpyVadim Bendebury
ChromeOS' top of the tree u-boot expects coreboot to export information about option ROM status (started/not started). Stumpy and Lumpy were left behind and are not exporting this information. This CL fixes the problem. Change-Id: Id90035bd76ab177e4fc269efc2b74f15f641c77d Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1713 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13Make EmeraldLake2 work againDuncan Laurie
Fix GPIO exporting for new Vboot for oprom-matters GPIO and to make the power button static. Change-Id: Ic042c428a1d43512228c686121fa057d876606e1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1761 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-13SandyBridge/IvyBridge: Add IFD and ME firmware automaticallyStefan Reinauer
Right now coreboot's build process produces images that are not booting on actual hardware because they are smaller than the actual flash device and also don't have an IFD nor an ME firmware in them. In order to produce bootable images, you needed a wrapper script / extra step until now. With this change, the resulting coreboot.rom is actually bootable. Change-Id: I82714069fb004d4badc41698747a704bd9fed4da Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1771 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-12ACPI: Zero pstate/cstate control values in FADTDuncan Laurie
If these values are non-zero then the kernel will issue an SMI for each core (cstate) and package (pstate). Since we don't do anything with these SMI callbacks we can avoid taking the extra SMIs at boot time by zeroing these fields. Change-Id: I3bc5fe0a9f45141d46884cb77ecdfaeaa45d2439 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1769 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-09Make coreboot use the offset parameter in cbfstool createStefan Reinauer
On Sandybridge and Ivybridge systems the firmware image has to store a lot more than just coreboot, including: - a firmware descriptor - Intel Management Engine firmware - MRC cache information This option allows to limit the size of the CBFS portion in the firmware image. Change-Id: Ib87fd16fff2a6811cf898d611c966b90c939c50f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1770 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09Get rid of hard coded strings in ACPI tablesStefan Reinauer
(cosmetical) Change-Id: I3e01d8fbf2d71abcfcbe47efedd2184566c91df7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1748 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-08mainboard/roda/rk886ex: Disable CHECK_SLFRCS_ON_RESUMENico Huber
This makes resume from S3 work again. The check is new and fails on other boards, too. Change-Id: I0ada569e4ba649b9ac82768b0888e16104c621e8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1809 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
Compose the name from Kconfig strings instead. As the field is for debug print use only, a minor change in the output should do no harm. The strings no longer include word "Mainboard". Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1635 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-06intel/socket_BGA956: enable speedstep, CAR, MMX, SSEPatrick Georgi
All of these capabilities exist on all CPUs supported on this socket. Change-Id: I54f34e48e34bb6ab5b9954ab7ece8c2c3a1a8e67 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1664 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-02remove enable_cache() of 3 mainboardsSiyuan Wang
Because enable cache is added at the end of disable_cache_as_ram, ( http://review.coreboot.org/#/c/1662/2/src/cpu/amd/agesa/cache_as_ram.inc ) enable_cache() should be removed. The 3 mainboards are: amd parmer, amd thatcher and tyan s8226 Change-Id: If870ca07d2e97b9e860a2e2315f551251c7a4ed2 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1669 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-02Persimmon: disable the unconnected Full-Speed USB portDave Frodin
Change-Id: Ia3824059a38412896ed2be0c8714018b2291c9f8 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1660 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-01Merge cpu/intel/acpi.h into cpu/intel/speedstep.hNico Huber
We had only some MSR definitions in there, which are used in speedstep related code. I think speedstep.h is the better and less confusing place for these. Change-Id: I1eddea72c1e2d3b2f651468b08b3c6f88b713149 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1655 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-30AMD SB800: PCIE slots on PersimmonZheng Bao
Enable the PCIE bridge which is connected to the PCIE slot. Change-Id: I1b3fb59990e06d7bc7cf19639f2b93dbb7bf9b3e Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1098 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 03:25:53 +0000