summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2015-02-16mainboard/asus/kfsn4-dre: Add default NVRAM settingsTimothy Pearson
Change-Id: Ic86104d6e7811b0bda9279411db84f464324994a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8450 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-16mainboard/asus/kfsn4-dre: Fix invalid CMOS enumsTimothy Pearson
Change-Id: Id837445f346e9ab0218ccca12794b519a8a71c0d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8449 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-15hp/pavilion_m6_1035dx: Provide CMOS defaultsAlexandru Gagniuc
TEST: Boot with corrupted CMOS and make sure console level defaults to SPEW, instead of 0, and that cbmem console is not empty. Change-Id: I8ab2423e99bbe116f52ad27f4b20427d8557f6ff Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8379 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-02-14AMD cimx/sb800: Fix PCI-to-PCI bridge 0:14.4 configurationKyösti Mälkki
A set of pins can be configured for GPIO or (parallel) PCI bridge use. When requested configuration is 0:14.4 enabled, register programming must be done before attempting to enumerate devices behind the bridge. When requested configuration is 0:14.4 disabled, we must not even temporarily enable pins for PCI use to avoid spurious GPIO state changes. As our PCI subsystem currently does not configure visible PCI bridges that are marked disabled, we cannot mark 0:14.4 disabled just yet but need to handle pcengines/apu1 as a special case. Drop related dead code. Change-Id: I8644ebae43b33121ef2a7ed30f745299716ce0df Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8329 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-14AGESA fam10 fam12 fam15: Always have HT3_SUPPORTKyösti Mälkki
Keep the slower HyperTransport configuration for a possible reference in fam15 boards. Change-Id: Ifcdedc6385fec80f7d02c55c2aac10e5e2429a18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8344 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-12AMD K8 boards’ `romstage.c`: Spell sync*hr*onize correctlyPaul Menzel
Change-Id: I92e6e7f1292f66642aa0336064a4eccba104dd08 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5101 Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-11asus/m4a785/Kconfig: Add vgabios PCI idNicolas Reinecke
The PCI id defaults to 1106,3230 -> via chrome 9 ... Tested on the board. Change-Id: I5ad91faec9c97f34c8ca48eee9198237e9ea8336 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8177 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-11mainboards/asus/kfsn4-dre: Run BSP FIDVID before AP FIDVIDTimothy Pearson
This resolves an issue on Shanghai dual CPU configurations where the APs on node 0 would not start. Single CPU configurations are unaffected by this issue. TEST: Booted KFSN4-DRE with dual Opteron 8389 CPUs and verified proper BSP/AP start and microcode patch levels. Change-Id: I0f5d4e0e356c6bd64e324b4399ef43b400ecab0c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8397 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-10lenovo/x200: Increase default CBFS_SIZE to 2 MiBMichał Masłowski
The original firmware has a 2 MiB BIOS region in both 4 MiB and 8 MiB flash variants. Let's allow using the whole region instead of the gm45 default of 1 MiB. Change-Id: I2d8a04bcb992bf2e8e15890a5c6719810b1cf405 Signed-off-by: Michał Masłowski <mtjm@mtjm.eu> Reviewed-on: http://review.coreboot.org/8392 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-09Intel FSP platforms: Fix timestampsKyösti Mälkki
Now that BROKEN_CAR_MIGRATE is fixed we can stash these in CAR. Change-Id: I49c31b91f34d415778797d08a347a51dbef797e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8024 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-02-08lenovo/t430s: Add new port.Nicolas Reinecke
The port is based on the x230 / t530. Tested - is in active use. Change-Id: Ic5ccfe70343e8aef3465690edce9cdebf153a44d Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8359 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-06mainboards/asus/kfsn4-dre: Indicate native text mode init supportTimothy Pearson
Change-Id: Ib00ecdcad17fa5c0300d22378837e36d0918f9db Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8369 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-05mainboards/asus/kfsn4-dre: Enable native VGA initializationTimothy Pearson
Change-Id: I953ced7d34af9ec0923fa6df93b9ad4270196c77 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8332 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-05newisys/khepri broadcom/blast: Drop duplicate entry in KconfigKyösti Mälkki
Keep the value that is listed first, it also the one with a more recent change. Change-Id: I0336c962544d75f94512563c08f280aa43c7a175 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8336 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-03amd/model_10xxx: Drop AMD_UCODE_PATCH_FILE selectionKyösti Mälkki
Include microcode updates in CBFS for every CPU revision the platform can support, as changing to different CPU revision should not require a coreboot rebuild. This increases CBFS usage from 2 kB to 14 kB. Change-Id: I6bf90221a688f1a54e49641ce3ba378c5bf659f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4521 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-02-01winent/mb6047: switch to CAR version of ck804 early_setup.cJonathan A. Kollasch
Change-Id: I9b45b7fbd862a5600ead7ad4e623a8a87ae364aa Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8319 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-01winent/mb6047: clean up includes in acpi_tables.cJonathan A. Kollasch
Change-Id: I63bdc856fa4232cd66ff2e48e39c2cdb97bb88d3 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8316 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-01winent/mb6047: use correct ACPI SCI interrupt triggerJonathan A. Kollasch
Change-Id: I245c0afb66f3a29b5acb40e8d949d8b1aa08cd73 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8315 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-02-01winent/mb6047: drop inaccurate comment in acpi_tables.cJonathan A. Kollasch
Change-Id: Ib0bb8bed32b96a5f7fd48407bd111972f89e7907 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8314 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-01lenovo/x230: Set xhci_switchable_ports and superspeed_capable_ports.Vladimir Serbinenko
Fixes USB3 ports degraded to USB2 speeds. Change-Id: Ie71c9fb6e52a3e72bb1e61351ad1cc0492d93cbc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/8313 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2015-01-31asus/kfsn4-dre: Increase maximum logical CPUs for Istanbul devicesTimothy Pearson
Test: Single Opteron 2419 with 1GB RAM in slot A1 Booted Ubuntu Linux 14.04 and verified all 6 cores were visible Brief stress test of all 6 cores simultaneously Verified proper ACPI power states for all 6 cores Change-Id: I1e598e36f9eaed5ba8a18b9c62ceedee16870f15 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8311 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-31mainboard/lenovo/t420s/Kconfig: select NO_UART_ON_SUPERIONicolas Reinecke
same as 37130ebdabe44989787aadeafbe79524970dec75 Change-Id: I73feed3a077dfcc61634147775df1e05fdb97e8b Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8278 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31lenovo/t530/romstage.c: add usb port description and missing oc configNicolas Reinecke
OC2 at port 4 was missing. Verified with RCBA dump. Change-Id: Ide5701d53aeee28619204c7ac408662626aa11e4 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8304 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-31lenovo/t5x0: Make version look like something thinkpad_acpi would acceptNicolas Reinecke
thinkpad_acpi checks that BIOS version matches some pattern. Report version in this form. same as http://review.coreboot.org/4650 / 63acd22dc5366c72a7165138f5030df9523824dc Change-Id: I82d7a2b9f2ec56557b3a9c26d1af57ed39e31850 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8302 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-29asus/kfsn4-dre/Kconfig: Enable power on after power fail by defaultTimothy Pearson
Change-Id: I655843c78d31cc69a007ddaf9b51cde063c48c79 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8299 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-28mainboards: Add support for the Asus KFSN4-DRE series of motherboardsTimothy Pearson
Status: Tested with KFSN4-DRE PCB v1.04G Booted Ubuntu Linux 14.04 and all onboard peripherals appear to work. Dual Opteron 8347 CPUs tested with 8GB RAM (4GB per bank). Dual Opteron 8356 CPUs tested with 1GB RAM in slot A1. AMD PowerNow! functions correctly via ACPI. Video, network, USB, SATA, and serial have received thorough testing. Tested with KFSN4-DRE PCB v1.05G Single Opteron 2419 CPU tested with 1GB RAM in slot A1. Booted to PXE configuration menu; not tested further. Known issues: RAM initialization is a bit flaky with multiple high-density modules; this could be a generic MCT training issue but is probably bad hardware. The XGI Volari option ROM crashes SeaBIOS v1.7.5, but the video device works after Linux boots and initializes the device. Suspend/resume functions at the S1 level but sometimes hangs on resume. Wake on LAN can be flaky; the strap(s) needed to have WoL work on power application were not physically installed by ASUS so the board needs to boot at least once after power application before it will work. Change-Id: I0709f822eea8ed877f55db9443143028a5400472 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8270 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-27CBMEM: Always use DYNAMIC_CBMEMKyösti Mälkki
Drop the implementation of statically allocated high memory region for CBMEM. There is no longer the need to explicitly select DYNAMIC_CBMEM, it is the only remaining choice. Change-Id: Iadf6f27a134e05daa1038646d0b4e0b8f9f0587a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7851 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27CBMEM: Do not use get_top_of_ram() with DYNAMIC_CBMEMKyösti Mälkki
The name was always obscure and confusing. Instead define cbmem_top() directly in the chipset code for x86 like on ARMs. TODO: Check TSEG alignment, it used for MTRR programming. Change-Id: Ibbe5f05ab9c7d87d09caa673766cd17d192cd045 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7888 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27CBMEM: Move cbmemc_reinit()Kyösti Mälkki
This replaces need for separate cbmemc_reinit() calls made via CAR_MIGRATE() and in ramstage. Change-Id: If7b4d855c75df58b173f26ef3c90a4a7563166d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7859 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2015-01-27southbridge/amd/pi: Rename Avalon to HudsonDave Frodin
To maintain consistancy with southbridge/amd/agesa/hudson rename pi/avalon to pi/hudson in advance of adding support for the base hudson southbridge. Change-Id: Icff8c4c06aae2d40cbd9e90903754735ac3510c3 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8251 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-01-27vboot2: read dev and recovery switchDaisuke Nojiri
TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=none Branch=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Ia5353018a0db3dae2e0432b7e6a34d46f81b0ffa Original-Reviewed-on: https://chromium-review.googlesource.com/206064 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit b420451c71c86bc27784d920f53870ee56ddc0f2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I30c9f0ac44de0a5816b5b8d0ded2dc7d7e77c7a1 Reviewed-on: http://review.coreboot.org/8162 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-27vboot2: implement select_firmware for pre-romstage verificationDaisuke Nojiri
This patch has a basic structure of vboot2 integration. It supports only Nyans, which have bootblock architecture and romstage architecture are compatible from linker's perspective. TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=None BRANCH=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I4bbd4d0452604943b376bef20ea8a258820810aa Original-Reviewed-on: https://chromium-review.googlesource.com/204522 Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit a6bce0cbed34def60386f3d9aece59e739740c58) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I63ddfbf463c8a83120828ec8ab994f8146f90001 Reviewed-on: http://review.coreboot.org/8160 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-27vboot2: add verstageStefan Reinauer
This reverts the revert commit 5780d6f3876723b94fbe3653c9d87dad6330862e and fixes the build issue that cuased it to be reverted. Verstage will host vboot2 for firmware verification. It's a stage in the sense that it has its own set of toolchains, compiler flags, and includes. This allows us to easily add object files as needed. But it's directly linked to bootblock. This allows us to avoid code duplication for stage loading and jumping (e.g. cbfs driver) for the boards where bootblock has to run in a different architecture (e.g. Tegra124). To avoid name space conflict, verstage symbols are prefixed with verstage_. TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=None BRANCH=none Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Iad57741157ec70426c676e46c5855e6797ac1dac Original-Reviewed-on: https://chromium-review.googlesource.com/204376 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> (cherry picked from commit 27940f891678dae975b68f2fc729ad7348192af3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2a83b87c29d98d97ae316091cf3ed7b024e21daf Reviewed-on: http://review.coreboot.org/8224 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-26rush: Add support for rush boardFurquan Shaikh
Add basic support for rush board BUG=None BRANCH=None TEST=Compiles successfully with soc tegra132 and armv8 arch selected for romstage and ramstage Original-Change-Id: Ica57c68d230e4e0e9916729752395843de188733 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197399 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 06a040dc320d7b04ec0f7e51c1b3987c8f6d80f3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ica57c68d230e4e0e9916729752395843de188733 Reviewed-on: http://review.coreboot.org/8041 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2015-01-19samus: Update indices of ramstage and refcode blobsRandall Spangler
This must be committed at the same time as the corresponding depthcharge change which updates the fmap. BUG=chrome-os-partner:30079 BRANCH=none TEST=Build samus firmware. dump_fmap -h /build/samus/firmware/image.bin shows PD_MAIN_A and PD_MAIN_B sections. Boot samus. 'crossystem mainfw_act' -> A As root, 'crossystem fwb_tries=1' Reboot samus. 'crossystem mainfw_act' -> B CQ-DEPEND=CL:208984,CL:*169850,CL:208989 Original-Change-Id: Ibccec8b82ba22c61248a79023f42b92e4763403e Original-Signed-off-by: Randall Spangler <rspangler@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/208899 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> (cherry picked from commit d241e1dddaf8a435e49e08e60e4ad998735d2137) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ida8f7bd68d71e2a4a47e304b8f8283b566c52837 Reviewed-on: http://review.coreboot.org/8219 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-19samus: Delay bringing SSD out of resetDuncan Laurie
In order to ensure that we meet timing requirements for the SSD power sequencing delay bringing the SSD out of reset until after memory training. BUG=chrome-os-partner:29914 BRANCH=None TEST=build and boot on samus Original-Change-Id: I807e3d3698255287c3fe7219f44e8ec9a0985df1 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/208155 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 1cf557049c49e1ba11ade1eee7a45fc2b075ff3d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib39a14a03e04a167fab45b58b3bc840eb4bcf317 Reviewed-on: http://review.coreboot.org/8215 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-19samus: Disable self refresh and MRC cache on broadwellDuncan Laurie
Add workarounds for power and/or lpddr3 issues on Broadwell SKU. BUG=chrome-os-partner:29787,chrome-os-partner:29117 BRANCH=None TEST=build and boot on samus Original-Change-Id: If99346212c10ad6026250e48bedd916611e2cb8c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/208154 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit c3ee57114315320b542f53645ffb168ad654b756) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie28f3ad65000a627ba64486e0f16493e8101cef3 Reviewed-on: http://review.coreboot.org/8214 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-19samus: Enable keyboard backlightDuncan Laurie
- Turn on keyboard backlight early in boot (not resume) path as a sign of life for the system - Add ACPI device for keyboard backlight so the kernel can find and make use of it BUG=chrome-os-partner:30586 BRANCH=None TEST=build and boot on samus Original-Change-Id: Iecaef0ec5c814774e19d7c4a14cb92dc236cfee3 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/208152 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit e166f76f9bd167468c7637dcce2b9eabf7dce8f0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I47927d97c1586ec09310d014d8fba7d7a3d773c4 Reviewed-on: http://review.coreboot.org/8213 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2015-01-19samus: add acpi resource for supporting RT5677 codecKane Chen
Add codec acpi resource for supporting RT5667 codec. BUG=chrome-os-partner:29649 TEST=emerge-coreboot successfully checked codec device is probed Original-Change-Id: I739c0dbfdbfa221b06f99c3d934825b640096c6b Original-Signed-off-by: Kane Chen <kane.chen@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/207707 Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> (cherry picked from commit f9698c45a47efe7fd2a1f5432640f3db5e4bd3f0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib14b27421613d747e02037ecd2311d9966a5d813 Reviewed-on: http://review.coreboot.org/8212 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-17asrock/e350m1: Fix PCIe slot for x4 cardsKyösti Mälkki
Configuration for GNB GPP was incorrect, only PCIe x1 cards worked. Change-Id: I369bf6382080e6034ff138ac664c76b03280ca69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8229 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-16rambi: configure USBPHY_COMPBG by the setting in devicetree.cbKane Chen
USBPHY_COMPBG needs to be configured by project BUG=chrome-os-partner:30690 BRANCH=none TEST=emerge-rambi coreboot without problem checked the USBPHY_COMPBG is configured properly CQ-DEPEND=CL:208557 Original-Change-Id: I8f2714644e1ef5d790d7ef1f574ebb998abbdac6 Original-Signed-off-by: Kane Chen <kane.chen@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/208731 Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit 1e9aeebb769e30940175cf3c38afe7ecfa69b5b4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I28aa445ccb4506db65784e30253dd16161b2bc75 Reviewed-on: http://review.coreboot.org/8217 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-15mainboard/tyan/s2882/irq_tables.c: Remove dead code under #if 0Edward O'Callaghan
Silence unused variable warning. Change-Id: I2671e0843a60e5bd857b233a45ea68715461f187 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8202 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-01-13mainboard/lenovo/x220/gpio.c: Remove unused structEdward O'Callaghan
Change-Id: I25bdee38cedbe38cd447483d3e8b3bdc3f646a62 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8201 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-01-12mainboard/lenovo/?/Kconfig: select NO_UART_ON_SUPERIOEdward O'Callaghan
These boards don't have Super I/O's, rather they use Embedded Controllers instead. No need to confuse with Super I/O related stuff showing up in menuconfig. Change-Id: I4922319daf7920bf5331b5bce05ded0d9a31a69b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7986 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-01-11mainboard/lenovo/x201/romstage.c: Remove unused functionEdward O'Callaghan
Function was orginally used for reverse engineering. Change-Id: I646dddd39e61b59358b29a49239c0a1de77c7e55 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8158 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2015-01-10ACPI: Add acpi_is_wakeup_s3() for romstageKyösti Mälkki
This replaces acpi_is_wakeup_early(). Change-Id: I23112c1fc7b6f99584bc065fbf6b10fb073b1eb6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8187 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-10Fix mainboard names for daisy and peach_pitDavid Hendricks
This just fixes name members of mainboard_ops for daisy and peach_pit, which were never officially supported but used for development and proof-of-concept. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: Ia1f9b62bc9d91ed634ec1eaa7f907e8aed977f96 Reviewed-on: http://review.coreboot.org/8184 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-10macbook21: Add CST entriesAxel Holewa
Due to the CST entries the machine uses less power running GNU/Linux-libre. This can be seen by monitoring CPU temperature and time left the machine can run on battery. CPU temperature measurements have been done with lm_sensors, battery querying with acpi. Tests have been done before applying this patch and after. In both cases the battery was fully loaded and the machine powered up on battery, without AC. In both tests the machine was idleing for more than 1 hour. Without this patch battery was predicted to last 01:52:30 hours, CPU temperature first measurement showed 38 degrees. After 15 min idle, temperature has reached its maximum value in this test of 61 and 62 degrees (Core 0 and 1). Fan speed begins to increase shortly after 15 min. From its minimal value 1800 rpm it reaches 3100 rpm after 40 min. CPU temperature did not increase any further. After 60 min idle, the battery was predicted to still last 57 min. With this patch battery was predicted to last 02:22:40 hours. That is plus 30 min. CPU temperature begins at 35 degrees. After 15 min temperature has reached 45 degrees; after 30 min it has reached the maximal temperature during this test of about 50 degrees. That is 10 degrees improvement. The fan stayed at minimal speed. After 60 min idle, the battery was predicted to still last 01:22:48 hours; a 25 minute improvement. Change-Id: I6b2173df1dc09300329b61b51b79f4b9f4a8fb13 Signed-off-by: Axel Holewa <mono@posteo.de> Reviewed-on: http://review.coreboot.org/7923 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-01-09AMD binaryPI 00730F01: Switch to per-device ACPIKyösti Mälkki
Change-Id: Iad31ae3e511c8ebacc973b2d8a8e3bfca719ee7c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7583 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 18:18:37 +0000