summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2021-02-06mb/google/kukui: Add byte mode/single rank DRAM support for burnet/escheKevin Chiu
ID#5: Hynix - H9HCNNNFAMMLXR-NEE (Byte mode) ID#7: MICRON - MT53E1G32D2NP-046 WT:A (Single rank) BUG=b:165768895 BRANCH=kukui TEST=1. emerge-jacuzzi coreboot 2. power on test ok Change-Id: Iaa735c23889860218f6f6571cf0bc0b21b304b51 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-02-06mb/intel/shadowmountain: Add bootblock and verstage codeV Sowmya
This patch includes the bootblock and verstage changes for shadowmountain board. BUG=b:175808146 TEST= Build and boot shadowmountain board till early romstage. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I5f805baf42203306ff10e91a258d9117dd986c4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/49479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2021-02-06mb/google/zork: Adjust Dirinboz H1 I2C CLKKevin Chiu
Adjust H1 I2C CLK: 404kHz -> 391 kHz BUG=b:178656936 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully 3. measure i2c freq by scope is close to 400kHz Change-Id: I9067db9fc7a4d6aa2ce33b86ba6a611dfd5d7838 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-02-06mb/google/dedede/var/galtic: Configure I2C high and low timeFrankChu
Configure the I2C bus high and low time for all enabled I2C buses. BUG=b:179100924 TEST=Measured the I2C bus frequency as 384 KHz, high time as 924 ns and low time as 1680 ns. Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I1525ecbf5baf9ae169afd7ce59079f395a2a45a8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-02-06mb/google/guybrush: First pass GPIO configuriation for GuybrushMathew King
BUG=b:175143925 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: Ia8211dbc3de09a61f264a0e5d44d1eac703b83c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50091 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-06mb/google/guybrush: Add stubs to configure GPIOsMathew King
BUG=b:175143925 TEST=builds Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I5afd2df396ba41f7d25fa7ff6879b7c1f82f438c Reviewed-on: https://review.coreboot.org/c/coreboot/+/49954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-05soc/amd/picasso: add UPD for RV2 USB3 phy setting adjustChris Wang
add UPD for RV2 USB3 phy setting adjust. Note: it only for RV2 silicon and not available for RV/PCO. Usb 3.1 PHY Parameters: 1. RX_EQ_DELTA_IQ_OVRD_VAL -Override value for rx_eq_delta_iq. Range 0-0xF 2. RX_EQ_DELTA_IQ_OVRD_EN -Enable override value for rx_eq_delta_iq. Range 0-0x1 3. Override value for rx_vref_ctrl. Range 0 - 0x1F 4. Enable override value for rx_vref_ctrl. Range 0 - 0x1 5. Override value for tx_vboost_lvl: 0 - 0x7. 6. Enable override value for tx_vboost_lvl. Range: 0 - 0x1 7. Override value for rx_vref_ctrl. Range 0 - 0x1F 8. Enable override value for rx_vref_ctrl. Range 0 - 0x1 9. Override value for tx_vboost_lvl: 0 - 0x7. 10. Enable override value for tx_vboost_lvl. Range: 0 - 0x1 BUG=b:175192931 TEST=Build/verify the valule will been apply on dirinboz Change-Id: I1d5f69e840952cc5171af1ce8597628d1bede5cb Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50240 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-05mb/gigabyte/ga-h61m-series: Drop broken thermal.aslAngel Pons
Was copy-pasted from another board and causes ACPI errors on Linux. Change-Id: I9d62462fb7ddc788d08489bf82b110aeae6a1ffc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-05mb/google/zork: update telemetry settings for WoomaxKane Chen
Improve performance and meet stardust test requirement. PcdSet32(PcdTelemetry_VddcrVddfull_Scale_Current,102586) PcdSet32(PcdTelemetry_VddcrVddOffset, 0) PcdSet32(PcdTelemetry_VddcrSocfull_Scale_Current,24674) PcdSet32(PcdTelemetry_VddcrSocOffset, 0) BUG=b:176156237 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I81dbfafffe7625c3d0d80419466240508f9b041b Reviewed-on: https://review.coreboot.org/c/coreboot/+/50256 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-05mb/google/brya: Add support for Hynix H9HCNNNBKMMLXR-NEE LP4x DRAMTim Wawrzynczak
BUG=b:178681161 TEST=abuild Change-Id: Icccfa3d1659e6c74c14a7372ea39c749a5921c64 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-02-05mb/apple/macbookair4_2: Add ACPI support for ECEvgeny Zinoviev
Add ACPI support for battery, AC and lid. I don't have MacBook Air 4,2 to test, but: - I tested it on 5,2; - I found decompiled DSDT for 4,2 and compared registers and bits, they are the same as on 5,2. So it should work. Change-Id: I592cb4501c878fe46684a524e729d32fb1d7920c Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-05soc/intel/alderlake: Refactor PCIE port configEric Lai
Refactor PCIE port config structure. Make it easier to map from schematic. We don't have to convert the PCIE ports RP number and CLK source in devicetree. All the convert will be done by SoC level. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I0b390e43f8e99b19cfad178139b86a2f77d7a57b Reviewed-on: https://review.coreboot.org/c/coreboot/+/48340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-05intel: Turn `DEFAULT_RCBA` into a Kconfig symbolAngel Pons
Create `FIXED_RCBA_MMIO_BASE` and use it everywhere, except in cases where a pointer cast would be necessary. Instances in Sandy Bridge MRC code were left as-is intentionally, so as not to collide with another cleanup patch train. Tested with BUILD_TIMELESS=1, these boards remain identical: - Asus P8Z77-V LX2 - Packard Bell MS2290 Change-Id: I642958fbd6f02dbf54812d6a75d6bc3087acc77a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50036 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-05mb/google/dedede: Create kracko variantTony Huang
Create the kracko variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:178092096 BRANCH=dedede TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_KRACKO Change-Id: I7f8c7a4d4967e99896166ec9dd6b7381b7f6e5ed Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-02-04mb/google/zork/variants/vilboz: Enable BayHub lv2 driverJohn Su
Enable this driver along with power saving. BUG=b:177955523 BRANCH=zork TEST=boot and see this message: BayHub LV2: Power-saving enabled 110102 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Icd87ea585dfaa2185abf1f7bf803e9c9a6e63972 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-04drivers/intel/fsp2_0: Fix running on x86_64Patrick Rudolph
Add new Kconfig symbols to mark FSP binary as x86_32. Fix the FSP headers and replace void pointers by fixed sized integers depending on the used mode to compile the FSP. This issue has been reported here: https://github.com/intel/FSP/issues/59 This is necessary to run on x86_64, as pointers have different size. Add preprocessor error to warn that x86_64 FSP isn't supported by the current code. Tested on Intel Skylake. FSP-M no longer returns the error "Invalid Parameter". Change-Id: I6015005c4ee3fc2f361985cf8cff896bcefd04fb Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-04mb/google/volteer: update thermal table for EldridNick Chen
1. Add pl4 value 2. Change policies passive with sensor 0 and 1 3. Change granularity value with pl1 and pl2 BUG=b:178768749 TEST=make buildall Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I2f1fe9a6de4dbb587b79cb8758c5458a3ae5d768 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50111 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-04mb/prodrive/hermes: Use some board settings from EEPROMAngel Pons
Cache the board settings in memory to avoid having to read them from the EEPROM multiple times. For now, configure the following settings: - DeepSx - USB power in S5 - Power state after G3 Change-Id: Id88529a0b064c54fdf341de3856a8877109d4b14 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-04mb/prodrive/hermes: Define board settings in EEPROMAngel Pons
Hermes has an EEPROM with firmware configuration data. Add definitions to read and verify the `board settings` from the EEPROM. Subsequent commits will hook up these EEPROM settings. Change-Id: Id86632192ae53fd6b0e4df5b26b5a0a81e972818 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-04mb/google/kukui: kakadu: update the initial code for BOE LCDSunway
The latest initial code is from BOE, the vendor. BUG=b:179206650 BRANCH=kukui TEST=Run long time aging test and the BOE LCD shows normally. Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: Ibc1bd5147dbda4e3b94023e7ba52ff6a18abba0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/50215 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-04src: Remove useless comments in "includes" linesElyes HAOUAS
Change-Id: Ide5673dc99688422c5078c8c28ca5935fd39c854 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-04mb/clevo/cml-u/bootblock.c: Remove unused includesElyes HAOUAS
Change-Id: I048e906306bf77a941b5f731ade15292fa944390 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-02-04mb/amd/{parmer,thatcher}/bootblock.c: Remove unused includesElyes HAOUAS
Change-Id: I4d5520649addc671527e75f9090ea45a83b5db9b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-02-04mb/amd/majolica: add fmd for use when building chromeosMathew King
BUG=b:177909472 TEST=builds Change-Id: I5eb3c60fe60e4029485fae642c88c5c013ffb3f6 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50208 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-04mb/emulation/qemu: Fix SMP bootPatrick Rudolph
Fix booting with SMP enabled, when specifying more CPUs than supported by the code. Change-Id: Ib3d7c1a1a7a8633d4d434ccbd46cf92b0074b724 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-02-04src: Remove unused <bootstate.h>Elyes HAOUAS
Change-Id: I0d2ab4144970184f46e1d0e7a2464e94fa38aa63 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2021-02-04src: Remove unused <cbfs.h>Elyes HAOUAS
Change-Id: Idc11f1e131df2e01864fedac864bda5e11f2d17b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-02-04mb/google: Convert some CONFIG(CHROMEOS) preprocessorKyösti Mälkki
Change-Id: Ica8691e3dc4feecbeb11ba3f5868932f926965b2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48785 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-04mainboards: Remove default CHROMEOS=yKyösti Mälkki
Even the boards with MAINBOARD_HAS_CHROMEOS need to be build-tested with CHROMEOS=n. Change-Id: I16fcf62a23dae1b21c77cee275c867f9c1de893b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-02-04vc/google/chromeos: Drop <acpi/vpd.asl>Kyösti Mälkki
This was used as a means to read the MAC address and dynamically return it to the ethernet driver via ACPI. The kernel team ended up going another direction so this became obsolete. Change-Id: I7065bea4b288c689b41cc969989ec6fd87c75f1f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49902 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03mb/google/volteer/variants/drobit: Configure USB2 port for Type-CWayne3_Wang
USB2 ports assigned to type-C connector need to be configured properly by the USB2_PORT_TYPE_C. and also modify the description of USB port. BUG=b:177480902 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot chromeos-bootimage build Pass And check the typeC port function is normal by manual. Signed-off-by: Wayne3_Wang <Wayne3_Wang@pegatron.corp-partner.google.com> Change-Id: I9e962f8cd76e1986700821168594c50bc21553e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50217 Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03mb/google/volteer/var/voema: Enable EEPROM for OV2740David Wu
Add ACPI entries for AT24 NVM device. BUG=b:169551066 TEST=Build and run for basic camera functions. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ib8fb684166649f78713050d62445bf47189b06ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/50216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jim Lai <jim.lai@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-03soc/amd/picasso: clean up and re-sort UPD tableChris Wang
Clean up the unused UPD and re-sort the table, and also update the new phy parameter in the soc code and overridetree. remove: EDpPhySel EDpVersion rename: DpPhyOverride -> edp_phy_override EDpPhySel -> edp_physel DpVsPemphLevel -> edp_dp_vs_pemph_level MarginDeemPh -> edp_margin_deemph Deemph6db4 -> edp_deemph_6db_4 BoostAdj -> edp_boost_adj eDP phy setting: DP_VS_LEVEL0_PREEMPH_LEVEL0 = 0x00(0.4v 0db swing 0,pre-emphasis 0) COMMON_MAR_DEEMPH_NOM = 0x004b COMMON_SELDEEMPH60 = 0x0 CMD_BUS_GLOBAL_FOR_TX_LANE0 = 0x80 BUG=b:171269338 BRANCH=zork TEST=Build, verify the parameter pass to picasso-fsp Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I655af08e2f86398d088e30d330f49e71cf7e1275 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-02-03mb/google/volteer/variant/copano: support regular/numpad touchpadZhuohao Lee
Define the 25th bit of the fw_config for the regular touchpad and numpad touchpad selection. BUG=b:174027837 BRANCH=firmware-volteer-13672.B TEST=build pass Change-Id: Ic5d61f19fd385600cfdcdd045dab1e61b06e4663 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-03src: Remove unused <boardid.h>Elyes HAOUAS
Change-Id: I960870fabde1dacfe52a8a35c253b0bd097d3e10 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-02-03mb/google/volteer/variants/drobit: Modify touchpad I2C sequenceWayne3_Wang
Modify touchpad I2C sequence to meet requirement. BUG=b:178512111 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot chromeos-bootimage build Pass And check the touchpad I2C5 sequence by EE. Signed-off-by: Wayne3_Wang <Wayne3_Wang@pegatron.corp-partner.google.com> Change-Id: Iebbeeec51b802c318ac014dcdd2603b600d931a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49958 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Hao Chou <hao_chou@pegatron.corp-partner.google.com> Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03mb/google/volteer/variants/drobit: Add TBT PCIE rp setting for drobitWayne3_Wang
Add the TBT PCIE rp setting to on and also fixes system hang in recovery screen after selected "Power off" item problem. BUG=b:177963941 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot chromeos-bootimage build Pass And check the system can power off normally in recovery page Cq-Depend: chrome-internal:3581043 Signed-off-by: Wayne3_Wang <Wayne3_Wang@pegatron.corp-partner.google.com> Change-Id: Ic0a4756b4af839ea0a23febb991bd71af7733dcc Reviewed-on: https://review.coreboot.org/c/coreboot/+/50103 Reviewed-by: Wayne3 Wang <wayne3_wang@pegatron.corp-partner.google.com> Reviewed-by: Ariel Chang <ariel_chang@pegatron.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03hatch: Update fan and thermal settings for ambassadorNeill Corlett
Update fan and thermal settings for ambassador, per recommendations from Quanta. BUG=b:177765580 TEST=Built AP firmware Change-Id: I080859f872caf696f0c085defb8372de658da58a Signed-off-by: Neill Corlett <corlett@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50100 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Joe Tessler <jrt@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03mb/biostar/th61-itx/early_init.c: Clean includesElyes HAOUAS
Change-Id: I0619e567527812bd0e7088d23d91f114c8fec9ec Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-02-03mb/google/sarien: Turn `hda_verb.h` into `hda_verb.c`Angel Pons
Change-Id: I40c8145fdddf9605bc3cc66ae8075e52dca4e539 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-02mb/siemens/mc_apl1: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Iac8a6e386b708ae5c4dbf0677bfe05f1358bf8fd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49442 Tested-by: siemens-bot Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-02treewide [Kconfig]: Remove useless commentElyes HAOUAS
Change-Id: I3dafffa61f4fe6089fd11ef6579626aff8088df5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01mb/pcengines/apu2: Switch to proper GPIO APIKyösti Mälkki
Use the abstractions <gpio.h> provides. Change-Id: I348ba43a76287be5b24012ae3dfc28ed783da9c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-02-01sb/intel/i82801ix: Factor out common `acpi_fill_madt`Angel Pons
It is the same for all three mainboards. Change-Id: Ic5786bcc29e2549d6fc935d60c699c1cab84b237 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50027 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01mb/google/dedede/variants/drawcia/variant.c: Remove unused <bootstate.h>Elyes HAOUAS
Change-Id: I38d115f2c405128a8d80aec48d2d9d3f25867151 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45815 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01mb/google/{butterfly,link,rambi,stout}: Remove unused <acpi/acpi_gnvs.h>Elyes HAOUAS
Change-Id: If5c35f3518e2cc4d5760a64e0d38fc4843af498a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50164 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01soc/intel/alderlake: Create separate Kconfig for CLKSRC and CLKREQSubrata Banik
As per Hardware Architecture Specification (HAS) ADL-P has 7 CLKSRC and 10 CLKREQ (7 SRCCLK is internal and 3 SRCCLK from external CLK chip). ADL-M has 6 SRCCLK and CLKREQ (no external CLK chip). Change-Id: I7d223c165f819669722cbc80245fa8ec20372352 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50130 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01mb/google/dedede/var/magolor: Configure Acoustic noise mitigation UPDsRen Kuo
Enable Acoustic noise mitigation for magolor and set slew rate to 1/8 which is calibrated value for the board. BUG=b:178678267 BRANCH=dedede TEST=build firmware to UPD and Acoustic noise test Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: Idea2a801399bb5c7e0b8e59ee7a826c86a44f4ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/50099 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01drivers/security/cbnt: Fix bootblock sizeArthur Heymans
Change-Id: Ic5ad9d29f247b6f828501bfacc27a8af08761d55 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-02-01mb/google/brya: Initiate peripheral busesEric Lai
Initiate peripheral buses based on latest schematic. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ibf48aceca7ac8774b0353e31bd81e1880c4066ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/49007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-19 11:45:30 +0000