summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2018-12-18Revert "google/sarien: Increase BIOS region to 28MB"Lijian Zhao
This reverts commit ad41f5512306d118047d2f7243678ddb32b4b06b. Reason for revert: <Issue have seen on EVT platform that vboot always fail to verify keyblock A> BUG=b:121169122 Change-Id: I2790ef3463a228008b614498009fbdc8b493cfb0 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30286 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-18mb/asus/kgpe-d16: Set ASpeed GPIO SPD mux lines during bootTimothy Pearson
When the BMC firmware module is installed on the KGPE-D16, the RAM SPD multiplexer lines are disconnected by hardware from the SP5100 GPIOs and attached to BMC GPIO lines instead. Set the BMC GPIOs to match the state of the SP5100 GPIOs during RAM setup. Change-Id: Ia251334ae44668c2260d8d2e816f85f1f62faac5 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/19820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-18mb/google/sarien/variants/arcada: Enable touchpad and touchscreenCasper Chang
Enable Elan touchpad and WACOM touchscreen BUG=b:119924134, b:120103010 BRANCH=master TEST=Verify touchpad and touchscreen on arcada work with this change. Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I3dcdb4eeeb32766e64553d9e69e6b7e2b5ba85aa Reviewed-on: https://review.coreboot.org/c/30146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-18mb/google/kahlee/liara: Document why IOMMU is disabledJonathan Neuschäfer
Commit d80884ea5a ("mb/google/kahlee: Disable IOMMU") disabled the IOMMU in all kahlee variants, but omitted the explaining comment only in liara's devicetree.cb. Copy this comment to liara. Change-Id: I564013a16217445003467e2a0579abd50597b205 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-18src/mb/google/*/Kconfig: Consistently use $(...) for variablesJonathan Neuschäfer
Using ${...} in some places is slightly confusing. Fixes: 395cbb4f97 ("mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetree") Change-Id: Id0856a10d92786a41d45ca697945699f6f4c1f4c Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-18mb/google/poppy/variants/nami: Add sku_ids for SyndraAmanda Huang
Sync'ing the sku_ids list in the master sku sheet. BUG=b:112876867 Change-Id: I658e8dc67679b5b528ab267861a1151f50e42414 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-17mb/google/octopus/variants/fleex: Update Charger throttling settingsSumeet Pawnikar
Update dptf settings for Charger throttling. Also, update Power Limit1 minimum value setting from 4.5W to 3W. BUG=b:112448519 BRANCH=octopus TEST=Built and tested on Fleex system Change-Id: I8c2a796ff28254ebef28ed5745b344f925d6e649 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-12-17mb/google/octopus: Add custom SAR values for BobbaJustin TerAvest
Bobba would prefer to use different SAR values per sku-id for regulatory compliance. This commit uses the newly added interface for custom wifi SAR CBFS filenames. CQ-DEPEND=CL:*729429 BUG=b:120958726 BRANCH=octopus TEST=build Signed-off-by: Justin TerAvest <teravest@chromium.org> Change-Id: I354382d651d65d533459f0ca460ca6fd6de547fd Reviewed-on: https://review.coreboot.org/c/30223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-17mb/google/poppy/variants/nami: perform PL2 setting for bard/ekkoRen Kuo
According to bard/ekko cpu types, PL2 need to set the values 1. KBL_U PL2 is 25w. 2. KBL_R PL2 is 29w. BUG=b:120874861 TEST=power on and check the DUT can boot up well Change-Id: I5f9d672c4244c363a7cfb362653663a065259fc0 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-17siemens/mc_apl4: Enable RTC RX6110SA on this mainboardUwe Poeche
Enaebl the RTC driver to be used on mc_apl4. Change-Id: Ib8d2a9f6b8cea47cd10db4dfcc59eec1b21c7993 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/30205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-12-17siemens/mc_apl4: Enable LVDS Display on mc_apl4Uwe Poeche
Enable PTN3460 chip initialization to get LVDS attached LCD working on mc_apl4. Change-Id: I3ccf5398f16831db321eba846d6b041daadf31dd Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/30204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-12-17siemens/mc_apl4: Add GPIO configurationUwe Poeche
Add GPIO configuration to match the hardware of mc_apl4. Change-Id: Ia69603f42c57c1cc682550b8eeeab42fbac27563 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/30128 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-15mb/{intel,google}/{icelake_rvp,dragonegg}: make use of cpu_get_cpuid() ↵Subrata Banik
helper function This patch replaces cpuid(1) references from icelake mainboard with x86 cpu common code library functions cpu_get_cpuid(). - cpu_get_cpuid() -> to get processor id (from cpuid.eax) Change-Id: Ia12d95d911dd6ee60a3a35937264fef668ad9e35 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2018-12-14cheza: Add board reset via Chrome ECJulius Werner
This patch implements board reset on the Cheza board. The real board reset used by the operating system uses the PMIC, but unfortunately the PMIC needs to be configured right for that to work. The PMIC configuration currently happens in the Qualcomm blob (QcLib) that is run from romstage, but vboot needs to be able to reboot during verstage already. Porting all the PMIC initialization code to run in the bootblock seems excessive (and at odds with the goal of doing as little as possible before verification), so we'll just do a little hack and ask the EC to perform a cold reset instead. For vboot purposes, this should work just as well. BUG=b:118501305 TEST=Hacked vboot code to call vboot_reboot(), confirmed that board reset and came back up as expected. Change-Id: I3858d95f481884a87c243d4fa3d6369c1e8a5a2c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/29849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-14mb/google/octopus: Override emmc DLL values for BobbaBora Guvendik
New emmc DLL values for Bobba. BUG=b:120561055 TEST=Boot to OS, chromeos-install, mmc_test Change-Id: I5a0d9587a91b3c71c042cd8ea360c816ea29fb91 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/30176 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-14google/grunt: Correct mismatch character hynix-H5AN8G6NAFR-UH.spd.hex SPD ↵Lucas Chen
file Module Part Number Correct Ram_ID=0b0000 SPD Module Part Number mismatch last alphabet 'C' to "H5AN8G6NAFR-UHC". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I4f4b83589ad6b53c0a24f2637f0fe8b92a1168e3 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-14google/grunt: Correct mismatch character hynix-H5ANAG6NAMR-UH.spd.hex SPD ↵Lucas Chen
file Module Part Number Correct to add Ram_ID=0b0001 SPD Module Part Number mismatch last alphabet 'C' to "H5ANAG6NAMR-UHC". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I4d320b2e10c4865456a9a9ccb400db5dd9256b3e Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30177 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-13mb/google/hatch: Creating skeleton directories and filesShelley Chen
Creating skeleton files and directories in mainboard for the new Hatch board. This is to facilitate development for different parties involved. BUG=None BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I5fc60c178f83034abe5d846d0f4169072b66f448 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/30169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2018-12-12cheza: board-level GPIO supportT Michael Turney
Change-Id: I64e79904c7ad95091ea29d9f80444c4e3b493471 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/29298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-12mb/google/octopus/ampton: Fix the TRACKPAD_INT_ODL GPIO configurationKarthikeyan Ramasubramanian
Update the TRACKPAD_INT1_1V8_ODL GPIO configuration so that it acts as a wakeup source BUG=b:119598593 BRANCH=octopus TEST=Ensure that the system wakes up on trackpad events. Ensure that the suspend_stress_test runs successfully for 25 iterations. Change-Id: I28292682cf9c8037abb87d265e49a60139550db2 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/30171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-12cheza: TPM/EC enable Kconfig in mainboardT Michael Turney
Change-Id: I15cfbbab15b940641c3952f2cfb4b11c37574816 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/29299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-11mb/google/octopus/variants/meep: Add 20ms reset delay for WACOM deviceTony Huang
Add reset delay in power resource to prevent bind to fail after unbind. BUG=b:119795901 BRANCH=master TEST=emerge-octopus coreboot, verified that WACOM touchscreen can re-bind successfully. Change-Id: Idcf02b1c931ed64951995403ec9ebe6b8f2db31d Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30099 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-11mb/google/sarien: Disable unused SATA portsLijian Zhao
Disable SATA port 0 and port 1 as that's not used as SATA on platform. BUG=N/A TEST=Build and boot up fine on google arcada board. Change-Id: I1b8801f7a0f9b7847b85d7c315fa0a2093b32f70 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2018-12-11mb/google/sarien: Disable PCH Gigabit LANLijian Zhao
There's no LAN connection on Arcada board, so disable PCH GBE. BUG=N/A Change-Id: I07c66df50dbe9fefd95a67b5af9e3f61ce6a18aa Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2018-12-11mb/intel/x200: Add data.vbtArthur Heymans
There are 2 vendor BIOS's for the Lenovo X200 with the difference being the settings in the VBT blob to accommodate different backlight frequencies. Linux however sticks with the setting set by the firmware. Tested on Lenovo X200 with CCFL backlight. Change-Id: I4c4a7011ce03cdd511fa2e2160c2f006ba2707ba Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29904 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-11mb/google/poppy/variants/nami: Modify SPD for hynix memory partRen Kuo
correct memory part name form hynix_dimm_H5ANAG6NCMR-VKC to hynix_dimm_H5AN4G6NAFR-UHC BUG=b:113983573 BRANCH=Nami TEST=emerge-nami coreboot chromeos-bootimage Change-Id: I0c33343eb1269919fba324333897805da1d1ff9b Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-12-10mb/intel/icelake_rvp: Fill Icelake U and Y RVP devicetree parametersAamir Bohra
This implementation configures below parameters: 1. Enable SaGv, isclk. 2. Set Pcie rootport enable, Clock source usage and clkreq. 3. Configure SATA and LPSS controllers parameters. 4. Enable CNVI controller, configure Wifi end device under PCIE RP1. 5. Add TPM device support under GSPI1. Change-Id: I585e82799eea0bad19ad2c94d6b4b3024f930ed4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-10mb/google/octopus: Update the PEN_EJECT GPIO configurationKarthikeyan Ramasubramanian
PEN_EJECT GPIOs are active high and also require an internal pull-up. Update the GPIO configuration appropriately. BRANCH=octopus BUG=b:117953118 TEST=Ensure that the system boots to ChromeOS. Ensure that the stylus tools open on pen eject. Ensure that the system can enter S0ix and S3 states successfully when the pen is inserted. Ensure that the system wakes on Pen Eject. Ensure that the system does not enter S0ix and S3 states when the pen is placed in its holder. Ensure that the suspend_stress_test runs successfully for 25 iterations with the pen placed in its holder. Change-Id: Ibf9cb214a8ce7561efbb77a7e99d1e386cf064c3 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-10mb/google/sarien: Update GPIOs for next buildDuncan Laurie
Update the GPIOs for the next board build. Mostly minor changes but the polarity change on GPP_E8/RECOVERY on sarien will result in it booting to recovery every time unless using new hardware. For this reason the recovery mode GPIO that is passed to vboot is commented out for sarien. It is only used for testing and currently it is useful to have an image that works on both board versions. Change-Id: I32d84f3010cb4d3968370a03f7e191b1710a50e8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30062 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-10mb/google/sarien: Setup GPIOs again after FSP-SDuncan Laurie
Currently CoffeeLake FSP is incorrectly modifying GPIO pad configuration if specific UPD variables are not set as it expects. This affects the display-related SOC pads with the following UPD variables: UINT8 DdiPortBHpd; // GPP_E13 UINT8 DdiPortCHpd; // GPP_E14 UINT8 DdiPortDHpd; // GPP_E15 UINT8 DdiPortFHpd; // GPP_E16 UINT8 DdiPortBDdc; // GPP_E18/GPP_E19 UINT8 DdiPortCDdc; // GPP_E20/GPP_E21 UINT8 DdiPortDDdc; // GPP_E22/GPP_E23 UINT8 DdiPortFDdc; // GPP_H16/GPP_H17 Until FSP is fixed to not touch the pad configuration this workaround will reprogram the GPIO settings after FSP-S step so they are correct when the OS attempts to use them. This was found in CoffeLake FSP Gold release: https://github.com/IntelFsp/FSP/tree/master/CoffeeLakeFspBinPkg As well as the current top-of-tree for the FSP sources. BUG=b:120686247,chromium:913216 TEST=verify correct GPIO configuration for GPP_E group in the kernel Change-Id: I19550c4347cf65d409de6a8638619270372c4d0a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-09mb/google/octopus/phaser: Fix trackpad GPE wake configurationKarthikeyan Ramasubramanian
Synaptics Trackpad wake event is incorrectly routed to GPE0_DW2_02. The concerned GPIO is not connected and hence wont trigger a wakeup. Fix the GPE wake configuration for synaptics trackpad. BUG=b:120666158 BRANCH=octopus TEST=Ensure that the wake on trackpad works with Synaptics touch pad. Ensure that the system can enter S0ix successfully(run suspend_stress_test -c 25). Change-Id: I87b8c266266280f61700839d428e6f8938b0f72f Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30105 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-09mb/google/sarien: Enable LAN clock source usageLijian Zhao
FSP defined a special clock source usage 0x70 for PCH LAN device, update that to google sarien platform. BUG=b:120003760 TEST=Boot up into OS, ethernet able to be listed in ifconfig. Change-Id: I9f945be4f0ce15470ab53f44e60143f3fd0fddf8 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-08google/grunt: Update micron-MT40A1G16KNR-075-E.spd.hex SPD file ModuleLucas Chen
Part Number Correct Ram_ID=0b0011 SPD Module Part Number to "MT40A1G16KNR-075:E" from "4ATS1G64HZ-2G6E1". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I9d582b3753de9a48865eb6eca7e4fbdb31b799ff Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-07google/grunt: Update hynix-H5AN8G6NAFR-UH.spd.hex SPD file Module PartLucas Chen
Number Correct Ram_ID=0b0000 SPD Module Part Number to "H5AN8G6NAFR-UH" from "HMA851S6AFR6N-UH". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I1f6e885638589a35334a9a8f905af4877c5d1f91 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-07google/grunt: Update micron-MT40A512M16JY-083E-B.spd.hex SPD file ModuleLucas Chen
Part Number Correct Ram_ID=0b0010 SPD Module Part Number to "MT40A512M16JY-083E:B" from "4ATF51264HZ-2G3B2". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I6847a55968260cdbc1588ddeb8d23c515ad87920 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-07mb/google/sarien: Enable ISH on arcada, disable on sarienDuncan Laurie
The Intel Sensor Hub was enabled on the wrong variant so this change moves the enable from sarien to arcada. Change-Id: If933623f7dbb45c4805fb61430465236eca19ee8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Li1 Feng <li1.feng@intel.com> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-07mb/google/kahlee: Use new VBIOS if liaraRichard Spiegel
A new liara specific VBIOS updating eDP power sequence is available now, Change Kconfig to use it if board is google liara. BUG=b:120534087 TEST=Build liara, booted, tested eDP test compliance. Change-Id: I444cfa0bd755480e006f11c0d692b25b96129c29 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/30090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-07mainboard/lenovo/t430s: Add ThinkPad T431s as a variantBill XIE
The code is based on autoport and that for T430s Tested: - CPU i5-3337U - Slotted DIMM 2GiB - Soldered RAM 4GiB from samsung (There may be more models here) - Camera - pci-e and usb2 on M.2 slot with A key for wlan - sata and usb2 (no superspeed components) on M.2 slot with B key for wwan - On board SDHCI connected to pci-e - USB3 ports - libgfxinit-based graphic init - NVRAM options for North and South bridges - Sound - Thinkpad EC - S3 - TPM1 on LPC - EHCI debug on SSP2 (USB3 port on the left) - Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from Linux payload (Heads), Seabios may also work. Not tested: - Fingerprint reader on USB2 (not present on mine) - Keyboard backlight (not present on mine) - "sticky_fn" flag in nvram Not implemented yet: - Fn locking in nvram (may not be identical to "sticky_fn") - C-based native graphic init (since T431s has eDP instead of LVDS) - Detecting the model of Soldered RAM at runtime, and loading the corresponding SPD datum (3 observed) from CBFS (the mechanism may be similar to that on x1_carbon_gen1 and s230u, but I do not know how to find gpio ports for that, and SPD data stored in vendor firmware.) Change-Id: Ic8062cacf5e8232405bb5757e1b1d063541f354a Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/c/30021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-07mb/google/sarien: Set initial I2C bus rise/fall timesDuncan Laurie
Provide rise/fall times as measured on existing boards. This will need adjusted for new boards but provides a starting point that makes I2C clocks look reasonable. Tested by measuring I2C bus speed and rise/fall times with a scope. Change-Id: Ic18010f5efc41dcee8925d696767ba2c44e3df4b Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-12-06rammus: ELAN touchpad I2C special timing requirementkane_chen
According to issue tracker b:119899090. https://partnerissuetracker.corp.google.com/issues/119899090 We modify rammus devicetree.cb .i2c[1] configuration to meet ELAN touchpad I2C special timing requirement. BUG=b:119899090 BRANCH=firmware-rammus-11275.B TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and check touchpad I2C characteristics meet requirement Signed-off-by: YanRu chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ifeb08c2530e6a7674f23f7d48cefa16cfc59cb13 Reviewed-on: https://review.coreboot.org/c/29922 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-06mb/google/sarien/variants/sarien: Enable melf touchscreenChris Zhou
BUG=b:119799550 BRANCH=master TEST=Verify touchscreen on sarien works with this change. Change-Id: I926c988c141628ae2d98206f9eb615d06357a366 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-06lenovo/h8,thinkpads: Re-do USB Always OnNathaniel Roach
Re-write the UAO handling code as it had stopped working (#171) (the flag was not getting read from the RTC properly in SMM) Remove the SMM code as it's not needed (but EC flag won't be set upon entering S3 now) Set the EC flags on boot the same way other flags are set Document bitwise operators for clarity Propagate changes to other Thinkpads (updated X201 to have 2 bits for the flag as it only had 1) Per Nicola Corna's previous commits, 0x0d is set for "AC only" "AC only" does exhibit different behaviour - the USB port is turned on a few seconds after entering S3, rather than < 1 sec, regardless of AC status Tested on X220 Change-Id: If812cd1ef8fb1a24d7fadbe834f574b40cbcd56a Signed-off-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-on: https://review.coreboot.org/c/29565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-12-06mb/lenovo/t520/romstage: Remove unused includesPeter Lemenkov
Tested - Lenovo t520 still builds fine with this patch. Change-Id: I82492c071ca760f0790b992acbdb86021f470cfe Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/30043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-05mb/google/sarien: Enable ISHJett Rink
Turn on the ISH in the device tree. BUG=b:120295222 Change-Id: I0ba08c245d050aebc6eb06055690c422ab9b51c6 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/30034 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05sdm845: Add SPI-NOR flash driverMukesh Savaliya
TEST=build & run Change-Id: Ie404faf37617d2ad792310709ca2063f9a372076 Signed-off-by: Mukesh Savaliya <msavaliy@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/25392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-05mainboard/google/kahlee: Add romstage GPIO initializationMartin Roth
Move the backlight initialization from bootblock to romstage BUG=b:120436919 TEST=Careena backlight is enabled Change-Id: Ia4993b993d37afaf9e23d6f3316ba91053732f1d Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/c/30039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-05google/sarien: Increase BIOS region to 28MBLijian Zhao
Platform have a 32MB SPI chip, so we can increase the bios region from 16MB to 28MB. BUG=b:119267832 TEST=Build and boot fine on sarien platform. Change-Id: I9bc0fa0f662e5ec64e77f2005dbb2e7edb8b2524 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-05soc/amd/stoneyridge: Name IO061 in ASL appropriatelyMarshall Dawson
AMD traditionally claims the resource at I/O port 61 for the onboard PC-AT speaker. In later designs, the speaker may be omitted in favor of routing the SPKR signal to the codec. Some systems implement neither, and for those it is not correct to identify the resource as a speaker. Modify the EISAID reported to the OS depending on the system design. The default is that port 61 is reported as reserved. In order to report a speaker, add #define in mainboard//dsdt.asl. TEST=check /proc/ioports and iasl -d for both ways using a Grunt BUG=b:117818432 Change-Id: I33aafb187f9fea7b38aae43c399292c7521fcfc4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/30037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-05mb/lenovo/x201/dsdt: Remove duplicated includePeter Lemenkov
Change-Id: Ifb08c903e19ef4e93bdc9cbc9844cb1888a8d2fa Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-12-05mb/lenovo/*/dsdt: Rearrange definesPeter Lemenkov
Sort mainboard-specific defines in the same order as in all other Lenovo boards. This is a purely cosmetic change which just makes diff between boards smaller. Change-Id: I4e379bb727b356fc6010e93de492f6d73f97a750 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 03:40:25 +0000